The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)

Hi All,
I have created a user 'Bitest' and group 'Bi_Test_Group'. Assigned the user to the group and the group to BI consumer role.
I gave access to only procurement and spend catalog folder reports and Dashboards.
When I login to BI Presentation Services with above created user and open any procurement and spent catalog dashboard i am getting below error in every report.
Its BI Apps 7.9.6.3 installation.I gave read  access to group to all procurement and spent subject area.
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P 
Odbc driver returned an error (SQLExecDirectW). 
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000) 
SQL Issued: {call NQSGetQueryColumnInfo('SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"')}
SQL Issued: SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"
Please help me in resolving this issue and getting results on Dashboard.
Thanks in advance
Thanks,
Sandeep

Check your query or connection pool settings etc

Similar Messages

  • [nQSError: 23006] The session variable, NQ_SESSION.S_Budgetary_Control, has no value definition.

    Hi All,
    I have created a Initialization block named Budgetary_Control
    the query entered in the data source is
    select
         column
    from
         table
    where
         user_name=':USER';
    then i selected a connection pool and tested with 2 USER
    and it gave me expected result.
    in the Edit data target i gave a name to this variable as S_Budgetary_Control and a default valus as -1
    i checked on row wise initialization test again
    it show me multiple record.
    the i save the rpd and deployed the same to the server.
    now when i trying to create a report using this varriable like VALUEOF(NQ_SESSION.S_Budgetary_Control) it gave me error like
    [nQSError: 23006] The session variable, NQ_SESSION.S_Budgetary_Control, has no value definition.
    Please help me to get rid of this issue.

    set Required for authentication
    and followed by Authentication init block as Execution Precedence
    ~ http://cool-bi.com

  • The file browser is disabled for security reasons. Please contact your system administrator and check the CKFinder configuration file.

    Hi,
    This message appeared as I tried to upload to images a site, using their image uploader.
    I am technologically challenged, so however you answer, please go slow
    Thanks a lot,
    Raphael

    Thanks Kirk! For once it's not on my end!
    Raphael

  • Error while accessing SharePoint 2013 news feed REST api - "The server encountered an error processing the request. See server logs for more details."

    Hi Experts,
    I am facing an issue while accessing SharePoint 2013 news feed REST api URL <SiteCollectionURL>/_api/social.feed/my/news from browser giving error "The server encountered an
    error processing the request. See server logs for more details."
    This is happening after posting the image to news feed without entering any text or description with that. If i post an image with some text or description, then i can able to get the feeds. Or else if i delete the image post then also i can able to get
    the feeds.
    I can able to see below logs in log files.
    Exception occured in scope Microsoft.Office.Server.Social.SPSocialRestFeed._SerializeToOData. Exception=System.MissingMethodException: No parameterless constructor defined for this object.     at System.RuntimeTypeHandle.CreateInstance(RuntimeType
    type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)     at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache,
    StackCrawlMark& stackMark)     at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)     at System.Activator.CreateInstance(Type type, Boolean nonPublic)
        at System.Activator.CreateInstance(Type type)     at Microsoft.SharePoint.C...
    ...lient.ValueTypeConverter.<GetODataProperties>d__2.MoveNext()     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection,
    Action beforePropertiesAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)    
    at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction,
    DuplicatePropertyNamesChecker duplicatePropertyNa...
    ...mesChecker, CollectionWithoutExpectedTypeValidator collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
    property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
    ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertie...
    ...sAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue
    complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, CollectionWithoutExpectedTypeValidator
    collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSeriali...
    ...zer.WriteCollectionValue(ODataCollectionValue collectionValue, IEdmTypeReference propertyTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
    property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
    ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertiesAction,
    Action afterPropertiesAct...
    Can anyone please help me out.
    Thanks!
    dinesh

    O365,
    Is this still an issue?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • I try to open hyperlinks in my email (Outlook) but I get this message: "this operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator". I am running Firefox 3.6.6

    I try to open hyperlinks in my email (Outlook) but I get this message: "this operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator". I am running Firefox 3.6.6
    == This happened ==
    Not sure how often

    See http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q310049 You receive an error message when you click a hyperlink in Outlook (default browser)

  • The session variable has no value definition

    Hi Gurus,
    For all Dashboard reports and Adhoc reports suddenly we are facing the below error for some users
    A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.AREA, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)
    In those dashboard reports we are not using any Area prompts even if we take only area column in analysis also it is showing the same error. But for admin the reports are coming fine only for some users it is showing like that but previously it was fine.
    Regards,

    Hi,
    this means your init block is not working. Check the init block why its not resulting in any data.
    only when init block doesn't  not result in data , server checks for default value for the variable.
    Since there is no default value, you get this error.
    Init blocks can fail because
    1. connection pool is not working.
    2. The table or view does not exist
    3. no data in the table
    4. filter in the sql in init block is not initialized if its coming from another session variable.
    typically no data should bring no results in a report.
    Since you have a session variable being part of the report, and that variable failed to initialize you get this error.
    Thanks,
    Satya Ranki Reddy

  • Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

    Hi,
    I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
    when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
    Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
    so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
    Could you please advise on this.
    Appreciate all and any help.
    Thanks,
    Divya

    Hi Divya,
    Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
    To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
    values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

    I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
    Excel Web Access
    An error has occurred.
    Please contact your system administrator if this problem persists.
    Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
    1. The 12/logs file is as bellows:
    10/10/2014 09:53:55.18  w3wp.exe (0x6528)                        0x5C08 Excel Services               
     Excel Calculation Services     2u7d Medium   ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
    not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local(). 
    10/10/2014 09:53:55.18  w3wp.exe (0x6528)                        0x5C08 Excel Services               
     Excel Services Administration  8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
    either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.. 
    10/10/2014 09:53:55.18  w3wp.exe (0x6528)                        0x5C08 Excel Services               
     Excel Web Access               6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
    An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
    outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()    
    at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office... 
    2.the event in event viewer is:
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          2014/10/10 9:49:43
    Event ID:      4625
    Task Category: Logon
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      ***.net
    Description:
    An account failed to log on.
    Subject:
     Security ID:  NULL SID
     Account Name:  -
     Account Domain:  -
     Logon ID:  0x0
    Logon Type:   3
    Account For Which Logon Failed:
     Security ID:  NULL SID
     Account Name:  ***
     Account Domain:  ***
    Failure Information:
     Failure Reason:  An Error occured during Logon.
     Status:   0xc000006d
     Sub Status:  0x0
    Process Information:
     Caller Process ID: 0x0
     Caller Process Name: -
    Network Information:
     Workstation Name: ***
     Source Network Address: ***
     Source Port:  63664
    Detailed Authentication Information:
     Logon Process:  
     Authentication Package: NTLM
     Transited Services: -
     Package Name (NTLM only): -
     Key Length:  0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
     - Transited services indicate which intermediate services have participated in this logon request.
     - Package name indicates which sub-protocol was used among the NTLM protocols.
     - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    Event Xml:
    <Event xmlns="">
      <System>
        <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
        <EventID>4625</EventID>
        <Version>0</Version>
        <Level>0</Level>
        <Task>12544</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8010000000000000</Keywords>
        <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
        <EventRecordID>37602685</EventRecordID>
        <Correlation />
        <Execution ProcessID="532" ThreadID="26096" />
        <Channel>Security</Channel>
        <Computer>***.net</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="SubjectUserSid">S-1-0-0</Data>
        <Data Name="SubjectUserName">-</Data>
        <Data Name="SubjectDomainName">-</Data>
        <Data Name="SubjectLogonId">0x0</Data>
        <Data Name="TargetUserSid">S-1-0-0</Data>
        <Data Name="TargetUserName">***</Data>
        <Data Name="TargetDomainName">***</Data>
        <Data Name="Status">0xc000006d</Data>
        <Data Name="FailureReason">%%2304</Data>
        <Data Name="SubStatus">0x0</Data>
        <Data Name="LogonType">3</Data>
        <Data Name="LogonProcessName">
        </Data>
        <Data Name="AuthenticationPackageName">NTLM</Data>
        <Data Name="WorkstationName">***</Data>
        <Data Name="TransmittedServices">-</Data>
        <Data Name="LmPackageName">-</Data>
        <Data Name="KeyLength">0</Data>
        <Data Name="ProcessId">0x0</Data>
        <Data Name="ProcessName">-</Data>
        <Data Name="IpAddress">***</Data>
        <Data Name="IpPort">63664</Data>
      </EventData>
    </Event>

    Hi Tracy,
    Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
    This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
    zone for your web application, and also add these URLs as trusted locations, then check results again.
    If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur. 
    https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
    http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
    Thanks
    Daniel Yang
    TechNet Community Support

  • IProcurement is not a valid responsibility for the current user. Please contact your System Administrator.

    Hi All,
    When I am trying to click on the 'iprocurement Home page' menu in the iprocurement responsibility getting the below error message in R12;
    "iProcurement is not a valid responsibility for the current user. Please contact your System Administrator."
    Can any one let me know how to resolve this?
    Regards
    Joseph

    Hi Joseph,
    I am assuming that the user actually has the iProcurement responsibility assigned to them. If so, try the following solution from note 1560400.1:
    1) Logon with System Administrator responsibility
    2) Navigate to Profile > System, click on User and enter the user name
    3) Search for profile 'Applications Start Page'. Delete the value set at user level and save
    4) Retry
    Regards,
    Cheryl

  • When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    When i tried to install DownloadHelper this happened Firefox could not install the file at
    https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
    because: Unexpected installation error
    Review the Error Console log for more details.
    -203
    , how do i check the log and how do i resolve this problem? thank you
    == This happened
    ==
    Just once or twice
    == today
    ==
    == Troubleshooting information
    ==
    Application Basics
    Name
    Firefox
    Version
    3.6.3
    Profile Directory
    Open Containing Folder
    Installed Plugins
    about:plugins
    Build Configuration
    about:buildconfig
    Extensions
    Name
    Version
    Enabled
    ID
    Ask Toolbar for Firefox
    2.1.0.5
    true
    AVG Safe Search
    9.0.0.783
    true
    {3f963a5b-e555-4543-90e2-c3908898db71}
    Java Console
    6.0.17
    true
    Microsoft .NET Framework Assistant
    1.1
    true
    {20a82645-c095-46ed-80e3-08825760534b}
    BitDefender Antiphishing Toolbar
    2.0
    true
    [email protected]
    Modified Preferences
    Name
    Value
    accessibility.typeaheadfind.flashBar
    0
    browser.places.smartBookmarksVersion
    2
    browser.startup.homepage_override.mstone
    rv:1.9.2.3
    extensions.lastAppVersion
    3.6.3
    general.useragent.extra.microsoftdotnet
    (.NET CLR 3.5.30729)
    network.cookie.prefsMigrated
    true
    places.last_vacuum
    1276351876
    print.print_printer
    HP Photosmart D5300 series
    print.printer_HP_Photosmart_D5300_series.print_bgcolor
    false
    print.printer_HP_Photosmart_D5300_series.print_bgimages
    false
    print.printer_HP_Photosmart_D5300_series.print_command
    print.printer_HP_Photosmart_D5300_series.print_downloadfonts
    false
    print.printer_HP_Photosmart_D5300_series.print_edge_bottom
    0
    print.printer_HP_Photosmart_D5300_series.print_edge_left
    0
    print.printer_HP_Photosmart_D5300_series.print_edge_right
    0
    print.printer_HP_Photosmart_D5300_series.print_edge_top
    0
    print.printer_HP_Photosmart_D5300_series.print_evenpages
    true
    print.printer_HP_Photosmart_D5300_series.print_footercenter
    print.printer_HP_Photosmart_D5300_series.print_footerleft
    &PT
    print.printer_HP_Photosmart_D5300_series.print_footerright
    &D
    print.printer_HP_Photosmart_D5300_series.print_headercenter
    print.printer_HP_Photosmart_D5300_series.print_headerleft
    &T
    print.printer_HP_Photosmart_D5300_series.print_headerright
    &U
    print.printer_HP_Photosmart_D5300_series.print_in_color
    true
    print.printer_HP_Photosmart_D5300_series.print_margin_bottom
    0.5
    print.printer_HP_Photosmart_D5300_series.print_margin_left
    0.5
    print.printer_HP_Photosmart_D5300_series.print_margin_right
    0.5
    print.printer_HP_Photosmart_D5300_series.print_margin_top
    0.5
    print.printer_HP_Photosmart_D5300_series.print_oddpages
    true
    print.printer_HP_Photosmart_D5300_series.print_orientation
    0
    print.printer_HP_Photosmart_D5300_series.print_pagedelay
    500
    print.printer_HP_Photosmart_D5300_series.print_paper_data
    9
    print.printer_HP_Photosmart_D5300_series.print_paper_height
    11.00
    print.printer_HP_Photosmart_D5300_series.print_paper_size_type
    0
    print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
    1
    print.printer_HP_Photosmart_D5300_series.print_paper_width
    8.50
    print.printer_HP_Photosmart_D5300_series.print_reversed
    false
    print.printer_HP_Photosmart_D5300_series.print_scaling
    1.00
    print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
    true
    print.printer_HP_Photosmart_D5300_series.print_to_file
    false
    print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
    0
    print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
    0
    print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
    0
    print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
    0
    privacy.sanitize.migrateFx3Prefs
    true
    security.warn_viewing_mixed
    false
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows Vista
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
    == Plugins installed
    ==
    *-npdivxplayerplugin
    *Default Plug-in
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
    *NPRuntime Script Plug-in Library for Java(TM) Deploy
    *6.0.12.732
    *RealPlayer(tm) LiveConnect-Enabled Plug-In
    *RealJukebox Netscape Plugin
    *Shockwave Flash 10.0 r45
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *iTunes Detector Plug-in
    *DivX Web Player version 2.0.0.254
    *GEPlugin
    *4.0.50524.0
    *Office Live Update v1.4
    *NPWLPG
    *Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
    *RealPlayer(tm) HTML5VideoShim Plug-In
    *Google Update
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

    Mark Leary:
    As TXGuy posted above:
    See:
    https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
    http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
    Also see:
    http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
    http://kb.mozillazine.org/Show_hidden_files_and_folders

  • Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

    Hi all,
    I have TFS2012 and run several projects.
    We encounterwed with such an error while using Build server.
    Overall Build Process
    Initial Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    00:00
    Get the Build
    00:00
    Update Build Number
    Initial Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Final Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Result = Ephone_DIT_Deploy_20150424.1
    01:56
    Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
    Initial Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    00:00
    Get the Build Directory
    Initial Property Values
    Result = d:\temp\217\CTI\Ephone_DIT_Deploy
    01:53
    If Not String.IsNullOrEmpty(ConfigurationFolderPath)
    Initial Property Values
    Condition = True
    01:53
    Run TfsBuild for Configuration Folder
    Initial Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp" 
    00:08
    Getting sources
    00:02
    Labeling sources
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
    00:19
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:10
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    MSBuild Log File
    00:08
    Generating list of changesets
    00:20
    Built Skins\SkinEPhone.cs for default targets.
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
    Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
       at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
       at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
       at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
       at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
       at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
       at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
    00:03
    Creating work item
     Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
    Exception Stack Trace:    at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
       at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
       at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    Final Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    Final Property Values
    Condition = True
    Final Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
    Final Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    Please have a look and guide where to find a problem
    Thanks ahead

    Hi Hooi,
    I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
    From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
    Best regards,

  • This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator

    Here is our environment:  Windows Server 2008 x86 SP2 Terminal Server running Citrix XenApp5.0 with Office 2007 installed.  We have a Group Policy to restrict users from access the server's C:\ drive.  When our users open or save a Microsoft
    Word, Excel, etc. document they are presented with the following error.  "This operation has been cancelled due to restrictions in effect on this computer.  Please contact your systems administrator."  When our users click on the OK button it
    allows them to open or save the document.    If I remove the restriction to C:\ from our Group Policy, then everything is working fine.  Please tell me how to fix this problem. Thanks.

    Hi Jeffery,
    Unfortunately, I could not work around this and MS said it was by design. I even tried some clever stuff with symbolic link s but to no avail. I simply ended up informing my users to ignore the message and continue. i don't want anyone to be able to browse
    the C: drive so I'm leaving the NoViewOnDrives registry key in place. However, there is one possible workaround but for me , it didn't suit:
    Change the temp  location of the folder Outlook uses for attachments
    http://support.microsoft.com/kb/817878
    Also, I'd recommend forcing all attachments to open in read-only mode http://support.microsoft.com/kb/953621 
    Annoying but you can't have everything i guess :(

  • Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator

    One of the user is getting the below error when the person is trying to login ELM system. what could be issue for the specific user and how do we resolve this issue?
    "Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator"

    Its works for other users, its only happened for one specific user only?  I didn't check the APPSRV.LOG file?  what needs to be checked in APPSRV.LOG, I can ask my infra team to check, because I don't have app server access to check log file.

  • An unexpected error has occurred. Please contact your system administrator

    Hi All,
    I have created one transaction in AR and i am trying to apply a credit transaction against this transaction in transaction work bench i am getting following error.
    Error:
    An unexpected error has occurred. Please contact your system administrator.
    we are using R12.1.3 version.
    Please help us.
    Regards,
    Raju.G

    Hi Raju,
    Please check for any errors in the DB and Application log file and post them here.
    Also refer notes:
    Transactions Workbench: Credit a Transactions Ends in Error: An Unexpected Error Has Occurred. Please Contact Your System Administrator (Doc ID 1552365.1)
    Troubleshooting Credit Memos in the Transaction Workbench and AutoInvoice in Receivables (Doc ID 1110573.1)
    Transactions Workbench Error: Listing of FRM Errors (Doc ID 1321612.1)
    Thanks &
    Best Regards ,

  • SQL reporting - An internal error occurred on the report server. See the error log for more details. (rsInternalError)

    I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
    Error: Sub report cannot be shown.
    An internal error occurred on the report server. See the error log for more details. (rsInternalError)
    When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
    Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
    Any Suggestion/feedback is highly appreciated.
    Thank You.
    The code of the sample RDL is shown below:
    <?xml version="1.0" encoding="utf-8"?>
    <Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
      <DataSources>
        <DataSource Name="DataSource1">
          <DataSourceReference>DataSource1</DataSourceReference>
          <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
        </DataSource>
      </DataSources>
      <BottomMargin>0.25in</BottomMargin>
      <RightMargin>0.25in</RightMargin>
      <PageWidth>11in</PageWidth>
      <ReportParameters>
        <ReportParameter Name="machine_id">
          <DataType>String</DataType>
          <Prompt>machine_id</Prompt>
        </ReportParameter>
        <ReportParameter Name="from_date">
          <DataType>String</DataType>
          <AllowBlank>true</AllowBlank>
          <Prompt>From Date</Prompt>
        </ReportParameter>
        <ReportParameter Name="to_date">
          <DataType>String</DataType>
          <AllowBlank>true</AllowBlank>
          <Prompt>To Date</Prompt>
        </ReportParameter>
      </ReportParameters>
      <rd:DrawGrid>true</rd:DrawGrid>
      <InteractiveWidth>8.5in</InteractiveWidth>
      <rd:SnapToGrid>true</rd:SnapToGrid>
      <Body>
        <ReportItems>
          <Table Name="table1">
            <DataSetName>Main_Report</DataSetName>
            <TableGroups>
              <TableGroup>
                <Header>
                  <TableRows>
                    <TableRow>
                      <TableCells>
                        <TableCell>
                          <ReportItems>
                            <Textbox Name="textbox2">
                              <rd:DefaultName>textbox2</rd:DefaultName>
                              <ZIndex>1</ZIndex>
                              <Style>
                                <TextAlign>Left</TextAlign>
                                <PaddingLeft>2pt</PaddingLeft>
                                <PaddingBottom>2pt</PaddingBottom>
                                <PaddingRight>2pt</PaddingRight>
                                <PaddingTop>2pt</PaddingTop>
                              </Style>
                              <CanGrow>true</CanGrow>
                              <Value>=Fields!syscode.Value</Value>
                            </Textbox>
                          </ReportItems>
                        </TableCell>
                      </TableCells>
                      <Height>0.25in</Height>
                    </TableRow>
                  </TableRows>
                  <RepeatOnNewPage>true</RepeatOnNewPage>
                </Header>
                <Grouping Name="table1_Group1">
                  <PageBreakAtEnd>true</PageBreakAtEnd>
                  <GroupExpressions>
                    <GroupExpression>=Fields!syscode.Value</GroupExpression>
                  </GroupExpressions>
                </Grouping>
              </TableGroup>
            </TableGroups>
            <Details>
              <TableRows>
                <TableRow>
                  <TableCells>
                    <TableCell>
                      <ReportItems>
                        <Subreport Name="subreport1">
                          <Parameters>
                            <Parameter Name="machine_id">
                              <Value>=Fields!machine_ip.Value</Value>
                            </Parameter>
                            <Parameter Name="syscode">
                              <Value>=Fields!syscode.Value</Value>
                            </Parameter>
                            <Parameter Name="from_date">
                              <Value>=Parameters!from_date.Value</Value>
                            </Parameter>
                            <Parameter Name="to_date">
                              <Value>=Parameters!to_date.Value</Value>
                            </Parameter>
                          </Parameters>
                          <ReportName>Holding_Summary_Multi_Period</ReportName>
                        </Subreport>
                      </ReportItems>
                    </TableCell>
                  </TableCells>
                  <Height>0.25in</Height>
                </TableRow>
              </TableRows>
            </Details>
            <TableColumns>
              <TableColumn>
                <Width>10.5in</Width>
              </TableColumn>
            </TableColumns>
            <Height>0.5in</Height>
          </Table>
        </ReportItems>
        <Height>0.75in</Height>
      </Body>
      <rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
      <LeftMargin>0.25in</LeftMargin>
      <DataSets>
        <DataSet Name="Main_Report">
          <Query>
            <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
            <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
    where machine_ip = @machine_id</CommandText>
            <QueryParameters>
              <QueryParameter Name="@machine_id">
                <Value>=Parameters!machine_id.Value</Value>
              </QueryParameter>
            </QueryParameters>
            <DataSourceName>DataSource1</DataSourceName>
          </Query>
          <Fields>
            <Field Name="syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>syscode</DataField>
            </Field>
            <Field Name="display_name">
              <rd:TypeName>System.String</rd:TypeName>
              <DataField>display_name</DataField>
            </Field>
            <Field Name="customer_syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>customer_syscode</DataField>
            </Field>
            <Field Name="account_syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>account_syscode</DataField>
            </Field>
            <Field Name="machine_ip">
              <rd:TypeName>System.String</rd:TypeName>
              <DataField>machine_ip</DataField>
            </Field>
          </Fields>
        </DataSet>
      </DataSets>
      <Code>Shared offset As Integer
    Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
      If reset
        offset = pagenumber - 1
      End If
      Return pagenumber - offset
    End Function
    </Code>
      <Width>10.5in</Width>
      <InteractiveHeight>11in</InteractiveHeight>
      <Language>en-US</Language>
      <PageFooter>
        <ReportItems>
          <Image Name="image1">
            <Sizing>Fit</Sizing>
            <Left>8.875in</Left>
            <MIMEType />
            <Width>1.5in</Width>
            <Source>External</Source>
            <Style />
            <Value>bottom_right_logo.gif</Value>
          </Image>
        </ReportItems>
        <Height>0.5in</Height>
        <PrintOnLastPage>true</PrintOnLastPage>
        <PrintOnFirstPage>true</PrintOnFirstPage>
      </PageFooter>
      <TopMargin>0.5in</TopMargin>
      <PageHeight>8.5in</PageHeight>
    </Report>

    i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
    when i click on manage for .rdl file, its throwing error , as
    "An internal error occurred on the report server. See the error log for more details. (rsInternalError)
    Object reference not set to an instance of an object.
    please help me with this

Maybe you are looking for

  • New Keyboard with KVM

    I have the new Apple Keyboard hooked up to a KVM switch that is Mac compatible but the keyboard will not work. I have tried other Apple Keyboards and it works so is there a way I can make the new keyboard work the the KVM switch?

  • BDC problem with back button

    Hi all, i have idoc number in alv output.when the user clicks on this ,it should take the control to BD87 transaction with idoc number getting transferred there .also BD87 screen has changed on select option where the default is sy-datum .i need to c

  • Error while configuring database for foundation service on EPM 11.1.2.1

    Hi, I have installed the foundation service and the database is Oracle. Before I tried to configue database for it, I created a tablespace naming HYPFS in Oracle and also I created a user HYPFS whose default tablespace is HYPFS. I gave the user CONNE

  • Can't open itunes 7.4

    Hi, I have an Apple Mac OS 10.4.11, dual 1.8 GHz PowerPC G5, 2.25 GB DDR SDRAM. I have Itunes 7.4. For years it has run just fine. Now when I try to open up iTunes it says the following: "The file 'ITunes Library' cannot be read because it was create

  • Air installation damaged

    Hello, I keep getting a message on start up of  ADOBE AIR.  'The installation of this application is damaged.  Try reinstalling or contacting the publisher for assistance'.  My system is VISTA.  I have uninstalled and reinstalled Air without any reso