The SMB client failed to resume a handle on a file share with continuous availability

Hi.
We have a 2-node WS2012 cluster that has a file server role with couple shares configured.
We're however constantly getting spammed by the following errors in the eventlog:
1) event 1002, source: SmbServer, message: "RKF failure - SRV2 failed to get acknowledgement from Resume Key filter for persistent handle request."
2) SCOM has an alert opened with this description: "SMB client failed to resume Continuously Available (CA) handle as Resume Key Filter is not acknowledging the handle." Per the alert knowledge, we've inspected ResumeKeyFilter eventlog, but it
contains only informational message and warnings and none of those are from the time the alert was created.

Hi,<o:p></o:p>
Please try applying the following hotfixes.<o:p></o:p>
Update that improves cloud service provider resiliency in Windows Server 2012<o:p></o:p>
http://support.microsoft.com/kb/2870270
<o:p></o:p>
Physical Disk resource move during the backup of a Cluster Shared Volume (CSV) may cause resource outage<o:p></o:p>
http://support.microsoft.com/kb/2869923
<o:p></o:p>
Can't access a resource that is hosted on a Windows 8 or Windows Server 2012-based failover cluster<o:p></o:p>
http://support.microsoft.com/kb/2838043
<o:p></o:p>
Best regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

WDS PXE Problems on 1 model of PC only - The following Client failed TFTP Download - Error Code 1460

Hey all,
I am experiencing a problem with my WDS PXE Environment, with 1 specific model of PC's only. This is a Dell XPS machine with an Intel e1000 nic in it.
The problem is that when you PXE Boot, it starts off fine, and I reach a menu that has all of my boot images listed, but as soon as you pick one it hangs on a black screen.
From the event viewer on the server I can see the following entry:
The Following Client failed TFTP Download:
IP: 10.130.148.211
Filename: \Boot\Boot.SDI
ErrorCode: 1460
I've done some google searching and found some topics that could be related, but none of the fixes mentioned helped me. This is the one I tried:
http://social.technet.microsoft.com/Forums/en-US/winserversetup/thread/a1246f62-6a8a-482b-9323-7e02dfeab196/#52aaf6fb-9494-4327-bbc3-8afe3e78905c
The problem I had was that the link they gave to the Hotfix, doesnt actually have anyway to download the hotfix!!
http://support.microsoft.com/kb/975710
Although
I am not convinced that packet size is the problem here, more likely some network or disk controller driver issues??
No
idea at all where to go from here. It is only this one model of PC that fails, and all others work fine. If someone can point me in the right direction it would be very greatly appreciated.
I
would be happy to provide you with any additional details you may require.
Thanks,
-Ben

You need to contact CSS to get this fix.
Hotfix Information
A supported hotfix is now available from Microsoft. However, it is intended to correct only the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore,
if you are not severely affected by this problem, we recommend that you wait for the next Windows Server 2008 service pack that contains this hotfix.
To resolve this problem immediately, contact Microsoft Customer Support Services to obtain the hotfix. For a complete list of Microsoft Customer Support Services telephone numbers
and information about support costs, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)
John | Program Manager | System Center Configuration Manager

When I try to import files from iMac HDD into the event, it fails. FCPX dosn't see this files for import. Files are *.m2ts and *.mpg. Should I buy plagin Quicktime component MPEG-2 to resolve a problem?

When I try to import files from iMac HDD into the event, it fails. FCPX dosn't see this files for import. Files are *.m2ts and *.mpg. Should I buy plagin Quicktime component MPEG-2 to resolve a problem?

no you should transcode those files into an format that os suitable for editing. Like proRez. Although you might need some Flip4Mac or perian or something to do the conversion.
adam

HT201077 My wife and I BOTH want to contribute to the same "family" photostream album. We both have our own iPhones. Is there a for both of us to contribute to the same album from our respective iPhones that we can then share with everyone?

My wife and I BOTH want to contribute to the same “family" photostream album. We both have our own iPhones. Is there a for both of us to contribute to the same album from our respective iPhones that we can then share with everyone?

Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac" maybe thats why nobody answered you.
It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well. I prefer to keep things simple, but...........you and yours, I dont know.......
http://support.apple.com/kb/PH11468

Index file share with pictures - how to get the "Tag" property as refiner?

Hi,
I'm indexing a folder in file share and in the windows explorer view i gave values to the "Tags" property.
Now i want to set it as refiner in search results. I see that SharePoint gets the properties of: file name, size, picture height, picture width, author... how to get also the properties of Tags? and Dimensions?
keren tsur

Hi keren,
According to your description, my understanding is that you want to add some refiners based on pictures’ properties in SharePoint 2013 Search.
Firstly, do a full crawl for the content cource.
For the ‘Tags’ refiner, go to the results page, click on edit page and edit the refiners web part, then choose the Choose Refiners picker. Now add the TAGS field to the right hand column.
More information, please refer to the link:
http://social.technet.microsoft.com/wiki/contents/articles/23690.sharepoint-metadata-tag-refiners-not-displaying-in-sharepoint-2013office-365-search.aspx
SharePoint indexes an item based on list/library columns. However, for the Dimensions property of pictures, SharePoint library cannot retrieve the property from pictures . So when crawling, the property cannot be crawed as a crawled property, you are not
able to add it as a refiner in Search. When you use Picture Library, there are Picture Size, Picture Width and Height columns, you can create refiners based on these three columns. You can check them in Crawled properties(CA->Search Service Application->Seach
Schema).
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

File share with my friends computer across the internet.

Hello,
so my friend recently got a mac (changed from windows)
and i was wondering can i set up file sharing with him?
I have created an "Online HD" in my sharing folder, so how can he access it?
thanks
Aries

Yes, it is possible. To add to what others have said here, if you are connected to the internet via a router that implements NAT (network address translation), you have to configure the router to do "port forwarding", which means that connections that come into it on a certain port (AppleShare uses port 548) should be forwarded to your computer on the LAN (local network). The person on the connecting end supplies the IP address or host name for the router (not your Mac) to connect.
Caveats are, your ISP may change your IP address at will so you have to beware of that. They usually don't change very often. More importantly, though, you should keep in mind that it is a big bad world out there, and every listening port that you enable is a potential avenue for the bad guys to get in. AppleShare is pretty secure, but if you do set this up then I recommend you enable it when necessary. Disable File Sharing, or better yet, disable the NAT port forwarding for 548, when you aren't using it.
Another caveat is that your ISP may not allow setting up a server on some ports, or at all. If they block port 548 you can use a different one. If they block all ports then you're out of luck.

Why is the new iOS 8 photo app slow handling photo raw files

I Have been importing my photos to ipad using the camera kit since the first iPad was released.
Originally I only imported JPEG, however as my photographic interest grew I switched to photo raw.
I have since being importing and edit pentax PEF photo raw files through the various versions of iOS, however since this new version the experience of editing and viewing my photos is slow, and unpleasant.
Choose a photo to view, and a blurry picture appears, and a second or 3 and the blurry images clears and I can view my photo, now swipe left to the next picture and the photos move as they should then stick half of the first picture is shown and half of the second, wait 2 / 3 seconds and the second picture is revealed, blurry, and wait another second or to and it clears. It carries on in this fashion, and it turns a pleasant experience, into a frustrating one.
on previous versions of iOS there would be a small pause as images loaded, but it was always smooth to move from picture to picture.
i Have tried switching to RAW+ hoping that only the attached JPEG would be imported. This did not appear to work with the whole image being imported.
please anyone how can I get back to the iOS photo app that worked better with raw photo files?

Briansyddal - you might be able to manage your phone without a PC, but many of us can't, especially those of us with large iTunes libraries. How do you propose I manage my 250GB of music using only a phone? Maybe I could go out and buy 10 iPhones and spread my library out among them!
Catz537 - I have the same problem as you and I've spent hours on the web trying to find a solution to it. It was a problem with iOS 7 and 8.1.1 doesn't fix it. The the only advice from Apple is completely useless because it requires you, effectively, to delete and recreate your iTunes library and lose all your metadata, album art, notes etc and there's also no guarantee it will work. I wish I could be more help (even more - I wish Apple could be more help) - I updated to 8.1.1 at 1400 today. At 2200 I'm still "waiting for changes to be applied" for a measly 16GB of music transfer.

I heard that if you file share with someone on accident, they can gain access to your mac if they know the password to your mac. Could someone who I accidentally file shared with login to my mac if I did not have an admin password at the time?

I know it was stupid to not have a computer password at the time, but I now do. Could this be possible?

Welcome to Apple Support Communities
This would only happen if you choose the whole hard drive as a shared folder, and it's not. By default, OS X only sets up File Sharing in order to share files through the Public folder. You can see which folders are being shared in System Preferences > Sharing > File Sharing.
If the whole hard drive is selected as a shared folder, remove it because they can access to all your files without any password. Apart from that, there's no risk, as they can't see any other folder than the ones you chose in System Preferences > Sharing

SMB client URL works in 10.4.10, breaks in 10.5 -- password not accepted

Hi,
The SMB client URL (Finder Command-K) that was working under 10.4.10 breaks under 10.5:
smb://DOMAIN-name;userid@Fully-qualified-DN-for-WinServer/PrivateSharename$
The symptom is that the Mac does connect to the WinServer, as I do get the userid/password prompt, with the userid already prefilled as DOMAIN-name\userid. But when I add my Windows password and submit, I get a delay and then a message my userid or password is invalid.
I know my userid and password are valid as they work from my PC, as well as from my Mac as far as establishing a Mac to PC screensharing session using MS Remote Desktop Connection.
I know that it's not a network, DNS, or WINS name resolution problem as I do get as far as the initial connection to the PC -- i.e. the userid/password prompt. As well I've tried using the Windows Server's IP address directly in the URL.
I've read the threads here and tried these variants of the URL:
smb://DOMAIN-name;userid@IP-of-WinServer/PrivateSharename$
smb://DOMAIN-name;userid:win-password@IP-of-WinServer/PrivateSharename$
I've tried the Ruby script to escape any funny characters in my win-password; but there are none anyways, and the output from the Ruby script mentioned in another thread are the same as my inputted password.
I've also gone into /etc/smb.conf and added the line suggested in another thread:
client NTLMv2 auth = Yes
...and rebooted. But that line is for Windows clients trying to connect to a samba server running on the Mac. I'm doing the opposite: trying to run a Samba client connection to a PC server.
Bottom line:
OS X 10.4.10 : no problem connecting to Windows server
OS X 10.5 : cannot
suggestions welcome,
...b

OK, so this SMB client URL (in the Finder, press Command-K) that was working under 10.4.10 breaks under 10.5:
smb://domain;[email protected]/share
so I added my domain name and WINS servers into the WINS tab of the Networking Preference Pane, and I was then able to browse our windows network in the Finder, find the above Win2003 PC server name, and connect! Yay!
So I went back and tried variations on the SMB URL above. Until finally this variation worked:
smb://domain;userid@server/share
Hmm. So server.domain.company.com which does resolve to the PC server's IP, no longer works under OS X 10.5 -- even though the same SMB URL worked in OS X 10.4.
Worse, while smb://domain;userid@server/share now works on the company LAN, smb://domain;userid@server/share fails over the company (cisco) VPN.
I speculate it's because OS X 10.5 is using the PC servers NetBIOS name above and therefore relying on various PC WINS server ports, whose packets can flow unimpeded over my LAN. But when I'm VPN'ing, the company LAN I land on blocks these packets and ports.
So after much tinkering, I returned to the Terminal.app and started reading the man pages about Samba, the open source Windows networking software used by OS X:
man -k smb <-- to look up all the terminal commands for samba
one of the entries this returned was:
nsmb.conf(5) - configuration file for SMB requests
Hmm, that sounds promising.
man nsmb.conf
returned a sample configuration file. I edited the sample file to include our windows "domain" name, and to map our "server" name to it's fully-qualified DNS name: "server.domain.company.com", and put this updated file, as per the man pages, in ~/Library/Preferences/nsmb.conf, and volia:
smb://domain;userid@server/share
now works for me to connect from OS X 10.5 to the "server" over our LAN and over our VPN!
This was a lot of work and not a general solution. OS X 10.4 was definitely better, but this is the only PC server I need to connect to, so I'm very happy that I don't have to uninstall Leopard and re-install Tiger.
...b

ConfigMgr 2012 R2 Client Failes to Install on HP EliteBook laptops with Synaptics Touchpad drivers

I've come across a fairly frustrating issue that has been taking up way too much of my time that past week or so. The issue started a little after some of our larger sites were migrated from SCCM 2007 to SCCM 2012. I started getting complaints that one of
our technical workstations (HP 8770w) was not deploying properly. I started investigating the issue and the problem involved the removal of the old ConfigMgr 2007 client and install of the new SCCM 2012 R2 client.
The Windows 7 x64 OS WIM that I am using is one that was migrated from the 07 to 2012 environment and it has been working fine. During the Setup Windows and ConfigMgr step the old client is removed and the new one for the 2012 environment installs. There
has not been any issues with this, but I feel something has changed now that we are deploying the 2012 R2 client.
Back to the issue, what happens is that the ConfigMgr client fails to uninstall the old client. Looking in the client.msi_uninstall file you will see that it is unable to locate a couple of SCCM 2007 configmgr client patches that were installed so it can
uninstall it. I get the "Couldn't find local patch ''. Looking for it at its source." line in the uninstall file. When I look for that under HKEY_CLASSES_ROOT\Installer\Patches the ENTIRE directory structure is empty. There is not a single item
listed under patches.
Since the only thing that happens in between the pushing down of the WIM and installing the configmgr client is the drivers that is where I started to look. I started over with the basics (disk and network driver) and it was able to complete the OSD process
(like the other 30+ models we currently support). I added drivers one by one having the system re-image each time. When I got to the Synaptics TouchPad drivers the issue would return. I've tried around 5 different drivers offered from the vendor and they
all result in the same behavior.
I'm still actively troubleshooting how to FIX this issue, but I have no idea why this is going on. I thought I would share with the community on this issue and see if anyone else has observed this VERY odd behavior.
Here is a snippet from the client.msi_uninstall log:
=== Verbose logging started: 1/15/2014 22:59:34 Build type: SHIP UNICODE 5.00.7601.00 Calling process: D:\_SMSTaskSequence\OSD\GAS000EF\ccmsetup.exe ===
MSI (c) (6C:BC) [22:59:34:264]: Resetting cached policy values
MSI (c) (6C:BC) [22:59:34:264]: Machine policy value 'Debug' is 0
MSI (c) (6C:BC) [22:59:34:264]: ******* RunEngine:
           ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
           ******* Action:
           ******* CommandLine: **********
MSI (c) (6C:BC) [22:59:34:264]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (6C:BC) [22:59:34:264]: Grabbed execution mutex.
MSI (c) (6C:BC) [22:59:34:264]: Cloaking enabled.
MSI (c) (6C:BC) [22:59:34:264]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (6C:BC) [22:59:34:264]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:80) [22:59:34:264]: Running installation inside multi-package transaction {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
MSI (s) (00:80) [22:59:34:264]: Grabbed execution mutex.
MSI (s) (00:D4) [22:59:34:264]: Resetting cached policy values
MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'Debug' is 0
MSI (s) (00:D4) [22:59:34:264]: ******* RunEngine:
           ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
           ******* Action:
           ******* CommandLine: **********
MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (00:D4) [22:59:34:405]: SRSetRestorePoint skipped for this transaction.
MSI (s) (00:D4) [22:59:34:405]: End dialog not enabled
MSI (s) (00:D4) [22:59:34:405]: Original package ==> C:\Windows\Installer\b8ba.msi
MSI (s) (00:D4) [22:59:34:405]: Package we're running from ==> C:\Windows\Installer\b8ba.msi
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall Flags override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall VersionNT override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: looking for appcompat database entry with ProductCode '{2609EDF1-34C4-4B03-B634-55F3B3BC4931}'.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (00:D4) [22:59:34:420]: MSCOREE not loaded loading copy from system32
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (00:D4) [22:59:34:420]: User policy value 'DisableMedia' is 0
MSI (s) (00:D4) [22:59:34:420]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {D478B8EE-EE0A-4004-980B-4D55533EE3C2} 3:
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {D478B8EE-EE0A-4004-980B-4D55533EE3C2} -- orphaning this patch
MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} 3:
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} -- orphaning this patch
MSI (s) (00:D4) [22:59:34:420]: SequencePatches starts. Product code: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}, Product version: 4.00.6487.2000, Upgrade code: {252DA259-82CA-4177-B8D0-49C78937BA3E}, Product language 1033
MSI (s) (00:D4) [22:59:34:420]: SequencePatches returns success.
MSI (s) (00:D4) [22:59:34:420]: Final Patch Application Order:
MSI (s) (00:D4) [22:59:34:420]: Other Patches:
MSI (s) (00:D4) [22:59:34:420]: Internal Exception during install operation: 0xc0000005 at 0x000007FEFDBF35E1.
MSI (s) (00:D4) [22:59:34:420]: WER report disabled for silent install.
MSI (s) (00:D4) [22:59:34:420]: Internal MSI error. Installer terminated prematurely.
MSI (s) (00:D4) [22:59:34:420]: MainEngineThread is returning 1603
MSI (s) (00:80) [22:59:34:420]: No System Restore sequence number for this installation.
Unexpected Termination
MSI (s) (00:80) [22:59:34:420]: User policy value 'DisableRollback' is 0
MSI (s) (00:80) [22:59:34:420]: Machine policy value 'DisableRollback' is 0
MSI (s) (00:80) [22:59:34:420]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (00:80) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (00:80) [22:59:34:420]: Restoring environment variables
MSI (c) (6C:BC) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (6C:BC) [22:59:34:420]: MainEngineThread is returning 1603
=== Verbose logging stopped: 1/15/2014 22:59:34 ===

@Narcoticoo
I've not used the tool. This issue has also expanded since the original title as I'm getting the same behavior with the driver package that does not include the Touchpad driver anymore. I'm currently going back to just the network and storage driver to see
if it works or not.
However, this is the bigger issue I have:
I have an older build called Build 5.7 internally. Using that WIM and the same driver package (original one that has the Touchpad driver included) it works without issue. Never had a problem.
The new build is called Build 6.0 internally. This WIM and the same driver package has not been working at all.
We support about 35 models with our current Windows 7 x64 image and I am having the same failure issue on four different HP models. They are the 8770w, ZBook 17, Z600 and Z820. The majority of the other systems are Dell devices. Just for transparency sakes,
nothing Dell specific is in the core WIM that is captured.
So, Build 5.7 can deploy just fine on all pieces of hardware with their old driver packages. The new Build 6.0 intalls on almost every platform fine with their old driver packages. These four HP systems are nothing but trouble though. I've opened a case
with HP to see if they have noticed anything internally. I'm not too hopeful, but at least it is something. Maybe there is some odd conflict with a newer Windows patch or some odd dependency on older HP drivers. The new image has .NET 4.5.1, IE 10 and so forth.

Jax-ws deployed in standalone client fails with nullpointerexception

I have a project which has deployed successfully as a standalone client with deployed jar files wlfullclient.jar, etc. When I add the jax-ws functions that I require, the deployed client fails with a nullpointerexception that is generated from the constructor of the Service class. The project runs successfully within the JDeveloper 11.1.1.5 environment and on a weblogic 10.3 server platform, but fails when I deploy as a standalone client with the wlfullclient.jar. I'm using JDK 1.6.0_24. In testing, the error occurs when I replace the {WLHome}\server\lib\weblogic.jar entry in the classpath with the wlfullclient.jar.
I tested from another angle by creating my jax-ws functions in a standalone deployment, and it works successfully communicates with the webservices. No additional entries on the classpath besides my deployed jar. I then added to my deployment a simple JMS context lookup:
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY, contextFactoryProvider);
ht.put(Context.PROVIDER_URL, urlString);
Context context = new InitialContext(ht);
This test runs without error in the JDeveloper environment. As soon as I add the wlfullclient.jar in the standalone environment, I get the following exception:
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/xml/ws/spi/ProviderImpl
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:630)
at java.lang.ClassLoader.defineClass(ClassLoader.java:614)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
at javax.xml.ws.spi.FactoryFinder.safeLoadClass(FactoryFinder.java:150)
at javax.xml.ws.spi.FactoryFinder.newInstance(FactoryFinder.java:30)
at javax.xml.ws.spi.FactoryFinder.find(FactoryFinder.java:90)
at javax.xml.ws.spi.Provider.provider(Provider.java:83)
at javax.xml.ws.Service.<init>(Service.java:56)
Interestingly, there is a class com/sun/xml/internal/ws.spi/ProviderImpl in the {JAVA_HOME}/jre/lib/rt.jar file, and I suppose this is what is used by the jax-ws classes when the wlfullclient.jar is not present on the classpath.
So, what is it that I am missing in how to get the jax-ws classes and the jms classes to work in the standalone deployment environment (outside of the JDeveloper environment).
Edited by: user3653687 on Jan 9, 2012 1:38 PM
Edited by: user3653687 on Jan 9, 2012 2:49 PM

Here is how I solved this problem to execute the application from a jar file (using Oracle Fusion Middleware 11.1.1.5.0 distribution). The key seems to be to extract the contents of the wseeclient.zip file into the same directory as the wlfullclient.jar and ws.api_1.1.0.0.jar files and then ensure that these 2 jars are on the classpath.
In JDeveloper, create a project that has the jms/jax-ws classes.
Put the following text entries to form the classpath (along with other dependent jars, e.g. org.eclipse.persistence...) into a file which will be included in the manifest for the client jar. Be sure to separate entries with a space.
lib/wlfullclient.jar lib/wseeclient.jar lib\ws.api_1.1.0.0.jar lib\org.eclipse.persistence_1.1.0.0_2-1.jar
In the Edit Deployment Profile Properties, select Include Manifest File, specify the main class to execute, and Add the classpath file to be included in the manifest.
Deploy the jar file.
In a deployment area, create the directory that will contain all the classpath jars (e.g. ./lib).
Within the directory ./lib, extract all files from wseeclient.zip (found in {weblogic home}/server/lib)
Copy wlfullclient.jar into the directory ./lib from the {weblogic home}/server/lib
Copy ws.api_1.1.0.0.jar into the directory ./lib from {oracle middleware home}modules
Copy org.eclipse.persistence_1.1.0.0_2-1.jar (for jaxb support) itno the directory ./lib from {oracle middleware home}/modules
Copy the deployed client jar to the deployment area and execute, e.g.:
java -jar ClientTest.jar myArguments

Ata 4.01 Failed to resume link (SControl 0)

::Loading initramfs
::Startx udevd
ata 4.01 Failed to resume link (SControl 0)
These are the starting 3 lines of my boot process. I am not facing any problems but want to know why is the link failing to resume. I understand that this is with respect to the SATA link. Can anyone explain?

Not a problem, it's just a warning.
I have that on my old dell when the SATA BIOS setting is set to IDE i.o. AHCI iirc (which I have to left unchanged due to the dual boot with windoze which doesn't boot in AHCI).
Anyway, it looks like a patch might come http://permalink.gmane.org/gmane.linux.ide/49813

When attempting a sync with my iPod Touch gen 5 I get this error "The iPod "****" could not be synced because the sync session failed to start." I could not find the backup file to delete per researched support recommendation. I have synced this iPod.

"....could not be synced because the sync session failed to start." I have synced this iPod with this MacBook Air about 6 weeks ago. Now it won't sync. A possible solution is to delete the backup file located in Mac:~/Library/Application Support/MobileSync/Backup/ However, I don't have a "MobileSync" folder in my Application Support folder. Please help.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also:
https://discussions.apple.com/thread/3415227?start=0&tstart=0
https://discussions.apple.com/message/16400530#16400530

"The iPhone could not be synced because the sync session failed to finish" Help!

So i have multiple devices synced to my macbook pro including an iphone 3g, 4, and 4s. 3g running 4.2.1, 4 running ios 5, and the 4s running ios 5 as well. I've had no trouble in the past month syncing the phones whether it be music, photos, contacts, etc. Now that i have updated my iTunes to the latest software i am getting a message saying "the iphone could not be synced because the sync session failed to finish". It shows this error message with every device that i plug into my mac including ipods. I've tried restoring all these devices, deleted all backups, and unchecked/checked libraries to sync one at a time. Nothing works. Please help!!!!!

Open itunes and connect iphone to itunes, syncing (=failed), exit itunes without unplugging and then open itunes again. if this doesnt work, uncheck apps & photos, sync again, before finish syncing stop it, then check it again.

What is the absolute client permission needed to receive Unix commands?

The ARD error "This task is not authorized on (computerName)" is forcing me to allow almost all the privileges in the Remote Management section of client computer's Sharing System Preferences. I've already had to add:
"open and quit applications"
"change settings"
"delete and replace items"
"restart and shutdown" (see this Apple document's suggestion for Unix commands)
"copy items"
It makes no sense to my why 'Generate reports' must also be added, but clicking it off makes the error return. I'm just triggering a Unix command that goes something like "echo 1" and runs as root on the one test computer (and potentially dozens, so it wouldn't be pretty changing settings in that many) If it helps, the ARD host is 10.6.7 with ARD 3.4 (installed via the App Store a couple weeks ago) and the clients are 10.4.11 and 10.5.8.
I'm preparing documentation for ARD and some clients installing our software will not warm to the idea of widening up the permissions footprint. Potentially dozens of computers will need to be retweaked, even if they wouldn't have to leave their seat.
We also will need to deploy a pkg installer, so some of those may need to remain checked, but ...
What is the absolute client permission needed to receive Unix commands?
Thanks

Have you tried sending it as User: Root
To my knowledge with that setting you do not need any client permissions as a unix command used as Root overides any permission set. If this is something you need to do often I do know for a fact you can make the report task up use send as Root and tell it to save as template. After this you will be able use the templte to make things a bet quicker. I believe in oder to do this you must enable root user open Directory Utility in order to do this. Keep in mind root has full permissions and any command you enter with unix will be executed as such. This is a word around in the way that the normal client users do not need to have permissions enabled, also having root available at times is handy in stick situations.

The SMB client failed to resume a handle on a file share with continuous availability

Similar Messages

Maybe you are looking for