The stills in my movie project do not respond when I try to edit their "duration" I change it the clip inspector and click done, but when I exit clip inspector , it reverts back to what it was prior to my trying to change it?

The stills in my i movie project will not allow me to edit the duration time. I change it in the clip inspector, but when I click done, it just reverts back to what it was prior to my attempt to change it?

Hi There,
I tried your workflow and some how I am not able to see your issue.
- Will it be possible for you to share your project(where-in you always see this issue) with us. You can upload your project and send the link to maanand (at the rate of ) adobe (dot) com.
- If sharing of project isn' t possible then please share the project details such as no of slides, objects etc.
-Manish
blogs.adobe.com/captivate

Similar Messages

Cannot save contact changes in outlook, always reverts back to what it was before.

Cannot save contact changes in outlook, always reverts back to what it was
before.

Hi
As per the information and details provided by you, to save the all contacts in Outlook, please follow these steps: -
By default, when you double-click on a contact in Outlook, the new
Contact Card displays for that contact. The Contact Card does not contain all the fields from the full contact editing window that opens when you create a new contact.
The
Contact Card also displays by default when you search for a contact. You can still open the full contact editing window when editing a contact or when searching for a contact. To switch to your
Contact folder, click the People link at the bottom of the
Outlook window or press Ctrl+3.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings!

Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings! Anyone else have this issue?

I think its meant to show your name, not your ID.

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error.

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error. This occured after my macbook pro shut down (because of low battery) while it was installing some updates. Please Help?

Try reinstalling OS X. What version did you have installed? If it's Snow Leopard do this:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Hi, I'm moving my site from MobileMe to Filezilla and there is apparently a coding error on iWeb that means when I try to get onto my site there's no access online and it says there are too many redirects. Anyone have any idea what this might be?

Hi, I'm moving my site from MobileMe to Filezilla and there is apparently a coding error on iWeb that means when I try to get onto my site there's no access online and it says there are too many redirects. Anyone have any idea what this might be?

Well, firstly Filezilla is not a hosting company but an ftp client that helps you upload your site to your new server. You need to purchase a new hosting account first though.
If you have iWeb 09 then you can publish directly to your new host and you select the publish to ftp option and not MobileMe - MobileMe won't be here after tomorrow.
You can also publish to a local folder if want to and use Filezilla to upload your site to your server.
You don't need re-directs as MobileMe won't be here so you need to cancel and delete your domain name from your MobileMe account and then cancel any domain name forwarding that you have at your domain name registrar - that is what the redirects are about.
Firstly ensure that you have your new hostings account - Filezilla is not a host, rather an ftp client that you use to upload your site.

I'm trying to save a custom patch in Garageband 10.0.2. Even though the new patch is saved and listed, when i re-open GB it's either reverted back to what it was previously or is blank.

Hi,
I'm finding it really frustrating to save a custom patch in Garage Band 10.0.2. I'm assigning new sounds to keys using the 'musical typing keys' and saving the patch. When I re-open Garage Band, the patch name is saved but all the information has reverted back to the original sounds OR it is completly blank. Can anyone help?
R

'musical typing keys'
The musical typing is a legacy instrument from GarageBand '11. You can use it, and drop samples to the keys, but GarageBand 10.0 does not save the patch. If you still have GarageBand '11 installed, create the custom sampler instrument in GarageBand '11 and save it there. It will appear in the library in the "User Channel Strip Section" category.

I just loaded Audition, but when I try to edit an audio track from Captivate the "edit in adobe audi

I just loaded Audition, and already had Captivate on my computer. I'm trying to edit an audio track from Captivate, so I go to Audio>Edit>Slide. But, the window that comes up does not have the "Edit in Audition" button activated. The button is faint, thus doesn't work. How do I sync these two programs so I can edit a Captivate Audio file in Audition?

From the captivate help file:
You can use Adobe Audition to edit audio when you want to go beyond the audio editing options available in Adobe Captivate. For example, to apply filters or remove noise, you need an advanced audio editor such as Adobe Audition. You can either edit the audio files from slides or batch process by opening multiple files in Adobe Audition using the Library panel.
The changes reflect in Adobe Captivate library and the associated slides where the audio files are being used. The saved files are reimported to Adobe Captivate with the slide associations intact.
Note: This feature is available only in Adobe Captivate that is installed as a part of Adobe eLearning Suite.
I think that the last line probably answers your question....

When I try to enter target URLs in my campaign on Direct CPV and click save and continue, the target URLs don't go into my target box. Do I need to do something with the settings on Firefox?

When I enter target URLs into my Direct CPV campaign, they don't carry over to my target list when I click save and continue. Is there a setting on Firefox I need to change to fix this?

I only have the problem when trying to load targets into my Direct CPV campaign.

Safari on my iPad 4 opens the latest page used rather than my home page. This is new ,after I updated to IOS 8.3.How do I get it back to what it was?

Safari on my iPad 4 opens the latest page used rather than to my home page.
This is new ,after I updated to IOS 8.3.How do I get it back to what it was?

You're welcome. You're not alone. The change has left alot of people scratchiing their heads wondering why. Maybe if enough people leave feedback at the link below it will be changed.
http://www.apple.com/feedback/

I updated my ipod touch 5th gen to iOS 8.2 and left it but when i got back it was in recovery mode with a red iTunes logo and i plugged it into my computer to reset my ipod and it wouldn't do it what do i do?

I updated my ipod touch 5th gen to iOS 8.2 and left it but when I got back it was in recovery mode with a red iTunes logo and I plugged it into my computer to reset my ipod and it wouldn't do it what do I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT204053 Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is

To repeat my question, Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is going on?
Everywhere I search on Apple's Support site says to sign in to iCloud using your "Apple ID," which I did. I've had my iTunes account for years (even migrated from the old AOL account system). It's the standard email+password that everyone is supposed to use.
My main question is how can I have a valid Apple ID and not an iCloud account--if the two are supposed to be linked?
Thank you for any help you can give me!
tlj

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

I had a new hard drive fitted to my imac and restored it from my time machine back when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

I had a new hard drive fitted to my imac and restored it from my time machine back up on an external hard drive when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!

Saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

None of my pictures that I uploaded into iPhoto are in my Finder under Pictures. Should I copy and paste my folders from iPhoto into here, in case something happens to my iPhoto program (in addition to backing them up onto an external hard drive like I already do)?
No, that's just wasting space. A back up needs to be on a different disk.
Your photos are within the iPhoto Library.

When I try to turn on Home Sharing, I get the message: "Home Sharing could not be turned on because of an error (5506)." What does this mean please?!

When I try to turn on Home Sharing, I get the message: "Home Sharing could not be turned on because of an error (5506)." What does this mean please?!

I had the same error it was due to a program called Little Snitch, it's somewhat like a firewall. I changed the settings in Little Snitch to allow network connections in iTunes and now I can enable Home Sharing. Maybe you should try changing some firewall settings.

Why should the Apple TV download movies its its not authorized to play ?

Why should the Apple TV download movies its its not authorized to play ? If the Apple TV is not authorized, how come the itunes store still goes ahead to download anyway ?

You need to be a bit more specific here.
Surely you're not suggesting iTunes or AppleTv are downloading things you've not purchased and therefore not entitled to play.
If it's something you've bought then there may be an authorisation issue with iTunes, AppleTv which could be due to a glitch (reboot AppleTV) or local/distant network issues.

The stills in my movie project do not respond when I try to edit their "duration" I change it the clip inspector and click done, but when I exit clip inspector , it reverts back to what it was prior to my trying to change it?

Similar Messages

Maybe you are looking for