The Sun is down and I can't get Forte for Java (?)
What's up here. I REQUIRE the newest version of Forte for Java as an IDE for JDK 1.4. The version that I have currently is over a year old. Everytime I select it from the "Products & APIs", I get a message:
Portions of sun.com are temporarily undergoing maintenance.
How long is this going to last? It's been unavailable for the last 10 hours (from my standpoint) and my project is at a screeching halt because of it (and since Borland has decided to soak me dry if I want a 'good' version of JBuilder that supports 1.4).
Not only is the project being squeezed inbetween an old version of the JDK and a just-released version, which not only will require uninstallation of the old and installation of the new, but will hopefully not break the project, requiring code changes.
Robert Templeton
Okay, I finally found it. Java.sun.com needs to update its product link to "SUN ONE" since it no longer goes by "Forte for Java". Talk about a lack of internal communication.
Robert Templeton
Similar Messages
-
I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!
Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.
-
I plugged in iPhone 5 charger to my MacBook Pro and it immediately shut down and I can't get it restarted. Any ideas how to do this without removing the battery?
If you have your MBP charger, try a SMC reset:
http://support.apple.com/en-us/HT201295
If no success, make an appointment at an Apple store genius bar.
Ciao. -
I was downloading itransmition on my iPad when done downloading there's a shadow of the app still downloading as if I am downloading again. Then I uninstall the app by clicking the 'x' but the shadow still there and I can't get rid of it.
Try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?
The battery is fully charged so it is not the problem.
What happens when you use the MagSafe? -
I updated my Mc to to the new operating software and the sound is gone and I can't get it back
I have upgraded to OS X Yosemite and now the Sound in gone and I can't get it back, The volume symbol is also grayed out.
Sound – can’t hear sound from speaker - Yosemite
Sound – No Sound After Upgrade (2)
Sound Levels - Troubleshoot
Sound – Troubleshooting Internal Speakers -
How can I install the iMac Graphics Firmware Update 2.0, if the screen is white and I can't get to the Apple menu? My computer has 5 vertical purple lines against white screen at startup before the Apple logo appears and the spinning gear...then everything disappears and the screen hangs on the white screen. I have tried unplugging and removing all my peripherals and the COMMAND, OPTION, P & R set of keys and still nothing. I have tried COMMAND C to start up from cd and it only tells me to turn off the computer and turn it back on. I found information on Apple's Support pages regarding the iMac Graphics Firmware Update but I am unable to download and install if I can't get to the Apple menu. Can anyone help?
You may have hardware problem, I think a visit to your local Apple Store or AASP is in order.
-
I have the original ipod touch and I can't get any apps on it. The only things I have on it are music and pictures. Do i have to install some sort of upgrade or something in order to get the apps on it? If so which upgrade is it and where do i find it? Thanks!
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
-
My MacBook Pro came with Lion pre-installed so I can't re-download it from the app store. Is it possible to get the installESD.dmg file and how can I get it if I can't re-download Lion in Apple Store option?
FYI Mac OS X is not designed to be installed on additional Macs, unless you purchased it from the App Store, in which case you can make as many copies as you wish and install it on as many Macs as you own.
From the Recovery Disk Assistant -
Notes
If the computer shipped with OS X Lion or Mountain Lion, the external recovery drive may only be used with the system that created it.
If the system was upgraded to Lion or Mountain Lion purchased from the App Store, the external recovery drive can be used with other similarly-upgraded systems. -
I cannot open a pdf file on my Mac because i don't have the segue UI font. How can I get it for my Mac?
The user already has an identical topic https://forums.adobe.com/thread/1468166 in the Reader forum.
-
My daughter tried to play the My Horse game on her Ipod touch that she got for Christmas and when she opened the game it said something about sending "push notifications" and gave the choice of "don't allow" or "ok"...we chose "don't allow". After that the screen went white and now we cannot get the Ipod touch to respond to anything. I tried holding the sleep/wake button to try to restart it and it doesn't seem to work. Any suggestions to get this device working again???
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, try a Restore:
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
There's more that you can do. Post back if none of the above solves the problem.
By the way, I always allow "push." That allows the app developer to "push" information to your device rather than waiting for you to ask for it. However, "don't allow" shouldn't cause the problem that you're experiencing. -
Premiere Pro keeps shutting down and I can't get rid of video clip from timeline
Lately, Premiere Pro keeps bringing up a message when I'm working on my project that says "serious error, Adobe Premier Pro needs to shut down". It's happened four times now. I've tried restarting the computer, uninstalling some programs I wasn't using, and even running updates that were needed. Still no luck. Also, in between shutdowns, there's a clip on my timeline that I imported from YouTube, and I can't get rid of it when I click "Cut" or "Clear". Any idea on why these things are happening?
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840 -
Okay, so I just updated to the newest iOS 6 version on my iPod. And now I can't be in an app for more than 5 minutes without the app closing and I can't get back into the app for at least 10 minutes. Somebody, anybody please help me! This is getting really annoying!!! Please please please!
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I had a google toolbar on my 3.6 firefox for at least one year . After my Mac crashed and I restarted everything it vanished and i can not get it back I tried to reinstall it does not work and when i go to add ons it tells me it is not available for 3.6 Firefox All my bookmarks re there (((
Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.
-
My Ipad shut down and it will not open. It is fully charged and so is the keyboard.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
"DBSTATUS_UNAVAILABLE" Error while importing Excel File
Hello, I am getting following error while importing data from Excel 2003 to SQL server using SSIS 2008, [Excel Source [1]] Error: There was an error with output "Excel Source Output" (9) on component "Excel Source" (1). The column status returned wa
-
Deploying BI publisher report from OEM plug-in
Hi! I am a bit confused about how to deploy & access BI publisher report from the plugin I develop I've found only the http://docs.oracle.com/cd/E24628_01/doc.121/e25161/bi_pub.htm and am a bit confused What I did: 1) Integrated BI publisher with OEM
-
Why will my Imac (1 yr old) only print the full document in half a page?
Why will my IMAC only print the full document in half a page? All updated IOS downloads. My Laptop Mac does not do this, so I feel it is not the printer, but the actual computer. The full document is printed, it is just half a page, other half is b
-
Regarding BT Infinity availability
about 2 weeks ago i checked more out of curiosity if it was available in our area. entering our phone number came out positive. then i started to compare what we have now how much it costs to what we would get with infinity. i decided against infinit
-
Data transfer process: use values of filter in routine
Hi, I create a filter in the data transfer process (RSA1). There are two infoobjects (ZABC, ZXYZ) in the filter. I fill the first select-option (parameter) with the value u2018AAAAu2019. At the second line I create the filter routine: form compute_/B