The third party software that Apple used to have on their website

For years, Apple had lots of third party software listed on their website. Now, it's gone without so much as a link or even a paragraph of text to find it.
Anyone know what they did with it and where I can find it?

Mike, I see it's answered... or is it?
http://www.apple.com/downloads/macosx/

Similar Messages

  • Can I use the third party software to backup my system?

     I have bought a new Thinkpad, and I just want to backup my system, but Lenovo Onekey recovery is not easy to use. I confess that it is very concise and powerful. But, I have to say some disadvantage, that is, It need to press the button and shut all computer. I want to backup my computer silently, and the process won't affect my other operation. I have searched a software- AOMEI Onekey Recovery, but it is the third party software, should I use it to backup my system. there seems to be more powerful in their page http://www.backup-utility.com/onekey-recovery.html, how should I determine? could anyone tell me the advantage or disadvantage?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
    Yes, if you are asking about using Time Machine to backup the Mac.
    Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
    You are not thinking of deleting the photos and files on your Mac, are you?  If you do this, you will have no backups for those files.
    Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
    In other words, only delete files from your Mac that you can afford to lose.

  • I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable on that is 2TB or a third party software that is compatable with the need I describe?

    I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable one that is 2TB or a third party software that is compatable with the need I describe?

    How much of a hurry are you in, and are you considering upgrading to Lion?
    File Vault on Snow Leopard only encrypts home folders you select, and doesn't work well with Time Machine.
    But Lion will have "full disk encryption" of local or external disks.  See File Vault 2 here: http://www.apple.com/macosx/whats-new/features.html

  • Is there any third party software that will allow me to print CD labels from iTunes?

    I want to be able to print a CD label from a song list I burnt to CD in iTunes. Is there a third party software that will let me do this since iTunes won't?

    Hi,
    If you wish to merely transfer files, one idea could be to have one ftp or web server on each machine, and then use appropriate clients (ftp programs or web browsers).
    TCP/IP software is available under System 7.5.5. The 8100/100 can use standard RJ-45 Ethernet cabling via a suitable adapter for AAUI-15 (such as the Apple Ethernet Twisted-Pair Transceiver M0437).
    For the Mac, the now free program NetPresenz could perhaps be of interest as a server solution.
    Jan

  • Any third party software that replaces SecMon and IDS-MC

    I am looking for any third party software that may replace SecMon and IDS-MC. We have had so many issues with it that it is time to find a solution by looking for another vendor to manage Cisco's NID's. If anyone has had any luck please let me know.

    CWSIM is another tool that you can use to get log messages out of sensor. for management purposes if you have a few sensors then you can use IDS device manager.

  • Where do I find the Third-Party Software for Oracle BRM ....

    Hi all. I am trying to find the Third-Party software as outlined here:
    http://docs.oracle.com/cd/E16754_01/doc.75/e16706/ins_ismp_perl_jre.htm#g1000844
    I cannot find it to download and install (for Oracle Linux 64), can anyone tell me where this package is located?
    Thanks,
    mlh
    Edited by: 958085 on Sep 10, 2012 5:44 AM

    Most likely you will find this software in https://edelivery.oracle.com (under Oracle Communications Applications for your OS) - pl open an SR in My Oracle Support to confirm
    HTH
    Srini

  • I cant seem to find any of the previous fx textures that i used to have before. Including the nature ones such as water, wall and moon textures.

    I cant seem to find any of the previous fx textures that i used to have before. Including the nature ones such as water, wall and moon textures.

    Please give us some more information: Photoshop version and OS version (First two lines of Help > System Info).
    Did these textures come with your install or are they from a third party?
    How did you access them before? Usually Textures are Presets you load into your Patterns dialog. If you install a new version of Photoshop or Reset Photoshop, you have to go into the Patterns Panel menu and reload them.

  • How to call third party software from Ecc6 using ABAP

    Hi all,
    I need to execute a third party software using abap coding .
    The software converts doc to pdf, the input from ecc6 would be the file path.
    I need to do this using ABAP.
    thanks
    ziv.

    Hi Ziv
    You can use METHOD cl_gui_frontend_services=>execute
      EXPORTING
        application            = <<<.exe file>>>
        operation              = 'OPEN'
    to run .exe files
    Best Regards
    Yossi

  • Is there third party software that will help clean up my macbook

    I have an old MacBook that runs so slow.  What would be the best thing to clean it up and make it usable again?

    Third party cleanup apps do not work and not necessary.
    10.8 Mountain Lion?
    If your Mac runs slowly
    Go step by step and test.
    http://support.apple.com/kb/PH10798
    Start up in Safe Mode
    http://support.apple.com/kb/PH11212
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Increase Disk space
    http://support.apple.com/kb/PH10677?viewlocale=en_US
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Hi,i hav a new laptop nd my songs on iphone is not stored in this computer,how can i store this songs from my iphone to my computer using itunes?? i hav tried other third party softwares but to use them i need to pay....pls help if possible.

    I am using itunes 10.4.1.10 version nd my iphone 4 is on 4.3.5....if anyone can help me would be very greatfull.
    Thank you.

    If you are not interested in purchasing any software, then your only other choice would be to take your iTunes backup that you made of your iTunes library and copy that over to the new computer. If you do not have that, then it could be difficult. However, if all of the content was purchased through iTunes, then after authorizing the computer with the Apple ID the songs were purchased on, you can transfer the purchases to the new computer.

  • Remove the third party software through GPO

    Hi
    I'm trying to remove a software, that installed through GPO from every client machine. 
    Right click the software from GPO and select All Tasks -> Remove
    Select the radio button Immediately uninstall the software from users and computers and click OK
    In my client machine Run the command "gpupdate \force" in command prompt and restart my computer. but when i check in Add or remove programs the software is still there.
    Why it not removing from my client machine?
    I need to run "gpupdate \force" after every action in all computer to make the changes..? like update my software with new version
    Thanks
    Bobbin

    Most of the software have an uninstall string.where we can use to uninstall the software using command line.
    you can use below mentioned free tool to find uninstall string from the registry.
    https://finduninstallstring.codeplex.com
    once you find the uninstall string you can use logon or startup script to uninstall software
    Darshana Jayathilake

  • I just purchased a new imac and my HP Color Laserjet CP1215 pinter is not supported by HP.  is there a workaround/third party software that will make it work?

    I just purchased a new imac and after connecting my HP CP1215 color laserjet printer found that HP does not support this printer.  I contacted Apple support and they could not supply any help.  Is there a alternate way/software avalable to make this printer work with my imac?

    Of course, once I posted this, I tried again and downloaded the driver without issue.
    My second question still stands, however:
    Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

  • How to configure Solaris that third-party software can use Netscape

    Hi,
    I don't know if this is Solaris configuration issue.
    I have Storage Foundation installed on Solaris 10 SPARC.
    And I am using the VEA GUI application to manage storage. Then I intentionally made some activities that the Error window appears with the link.
    This link point to the Veritas web page.
    After clicking on this link the error appears:
    "Error attempting to launch web browser.:
    netscape: not found"
    Please tell me whether this issue is because it needs some changes in Solaris or maybe the Storage Foundation needs to be configured properly?
    The internet connection works fine while executing the Netscape from CDE.
    Kind regards,
    Daniel

    I don't think it has anything to do with the third-party software. When you click on a link or document, the OS tries to access it using the associated application. In your case, clicking on a hyperlink tries to load the default web browser which on your system is Netscape.
    If say, you installed Firefox and configured it to be the default web browser then Solaris would launch it instead.
    Try to manually launch Netscape and in the preferences, set it as the default web browser. See how you go with that.
    Cheers,
    Erick Ramirez
    Melbourne, Australia

  • I am trying to send an e-mail form a third party software and it tells me that it can not connect to MAPI. I do not know what that is or what to do about it.

    The third party software is called Photo Mechanic.

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access web mail, you need to seek support from your service provider or a forum for that service.
    If your problem is with Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/]
    or this one
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • Reading a line from a third party software using call dll function.

    Hi,
    I am using a third party software in Lab VIEW.
    I am having trouble using one of the functions defined in the dll.
    I have the VI attached here, As u can see in the VI I am not sure how to use the function
    LCOM_MasterGetLine in the fourth sequence.....
    This has three parameters and they are
    (int ID,char*Buffer,int Length)
    What basically happens with this function is this...
    /* ROUTINE LCOM_MasterGetLine
    It Reads line of maximally Length characters from Slave ID into Buffer and the parameters are
    * ARGUMENT(S) ID ... Slaves ID
    * Buffer ... Where do you want chars (at least Length+1 in size)
    *Length ... How many at most (should be less than LCOM_MAXLEN)
    Can
    any one help me how to define the input parameters for this function, for example in the fourth part of the Vi attached here.
    What I understand from the function is that, the third party software when it sends a line, that line is stored in the input parameter...buffer ...that is defined to the dll.
    Can any one help me how to then read what line has been sent from the third party software.
    I am including the dll file and also the header file here.
    Thanks a lot,
    Ajit
    Attachments:
    New_Folder.zip ‏30 KB

    One problems with your solution:
    LCOM_MasterGetLine(int ID,char*Buffer,int Length)
    You should allocate a buffer large enough in LabVIEW and pass it to the Call Library Node. The dll function needs som space to actually scribble in whatever it wants to do.
    Check out the attachement this should more or less be what you will need.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions
    Attachments:
    ex.vi ‏45 KB

Maybe you are looking for