The three problems about flex

1, memory release:
There are two swf file:1.Swf, 2.swf.After i load 1.swf by
ModuleLoader,i load 2.swf, but 1.Swf is memory, have not been
removed, how the release of Memory is out. Remove and use of
mandatory release, memory or not the release of swaps. How the
experts handle it ?
2, focus
Firefox browser, the first load, how can access to
focus.every page,the focus will be used, it was made the focus of
public control Mody, what ideas can make reference to Mody?
3, navigateToURL
In the flex, so the two application, respectively a.mxml,
b.mxml. In a.html, according to the enter key on your keyboard
through navigateToURL to Jump to b.html, Jump in the process, there
will be some white, to b.html pages before, I how to remove the
white, or can be The other change to white color?
Thanks

Similar Messages

The problem about x-fi elite pro's I/O conso

When i bought the x-fi elite pro,i used it on the AMD athlon64 3500+ ?ASUS ax800xt and GigaByte K8NSNXP-939 motherboard in windowsxp sp2 32bit.
After i installed it just as the quick start said,everything is fine and i like it very much.
I do think that creative had done a great job and it is the best reason to change the sb audigy2 ZS platinum pro.
But the problem comes when i change the hardware to amd AMD Athlon64 X2 4400+?Leadtek 7800GTX(single,not SLI)and ASUS A8N32-SLI motherboard.
After i changed the three things, i shut up to the older winxp pro sp2 32bit,it found a lot of newhardware,most of them are related to the nforce4 sli chipset,when it found x-fi,the system bring up blue screen and restart automaticly.
After the restart,i can startup in the system and change the settings of the x-fi(the hardware id has changed) ,and thus everything seems fine(the S750 works well),but the I/O console has no response, the blue led of the I/O console is dark.
Since then,i am in a nightmare.
I have tried a lot of ways in order to solve the problem, but it didn't work.first, i check the AD_Link carefully and everything is tight and fine,then i change the power splliter cable to another,i also plug the x-fi card into another slot and reinstall the operating system.
And now, i don't know how to solve the problem, Someone please help me.
plus,i use the newest motherboard bios 009,nforce4-sli chipset driver and 7800GTX drivers.
Eagerly for your advice.Message Edited by bravo on 0-5-2006 03:5 PM

The problem is actually about the power connector to the card (which powers the external box).
But of course is not since I forgotten to attach it
It is because the power connector is very tight, so when my friend helping me pulled out the connector, the connector?s plastic jack is also pulled out a half.
I don't notice it when I attach the power connector to it in my new computer, So the power connector can't really provide the power to the external box.
I hope someone can get some help from this thing.

TS1702 I am having a major problem with a Z2 app. I have written to the three times and received no response. Is there somewhere to report this and at least get my money back?

When Z2 did their first 5. Update, a message popped up saying you had to do the update. After doing so, another pop-up said to remove and reload the game. In doing so, all my progress/ purchases disappeared. I only updated on my iPad, not my iPhone, so the iPhone app is till on the "you have to install the update to play" status. I've written to Z2 three times with no response. I would at least expect a refund of the $ I have spent on the game.

You bought an app but it did not work properly on your device. You can easily report problems with your iTunes Store purchases via the iTunes Store. Here is how:
Launch iTunes > Choose Store > Sign in.
Store > View My Account > Purchase History then Click the Report a Problem button.
Fill out the form explaining the problem you are having.
Submit the problem report and wait for a response from Apple, they usually respond within 24 hours.
Notes:
When Apple emails your invoice, there will be a link on the invoice. You may also click the “Report Problem” link next to the app that you are having issues with to report your problems.
Problems with in-app purchases or free apps, report them here:http://www.apple.com/support/itunes/ww/
Before reporting your issue, make sure that you followed these troubleshooting steps explained here.
<Link Edited by Host>

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

Question on the known solution to the "Three pixel text jog" problem

Hello,
I'm "browser-checking" my website using Dreamweaver CS4 tool for that. I've got in various places the "three pixel text jog" IE problem. I followed the link to solution proposed by DW. It says I should add an IE conditional statement in the <head> part, so that I can define the CSS zoom property for that particular element. Hence, something like that:

(assuming the problem occurs for a <p> inside my #Content div.)
My question is: can I replace this by

For another browser problem (prevent the browsers from using some of their own default settings), it was advised to reset the margin, padding and border properties using:
   border: 0;
   margin: 0;
   padding: 0;
(although in my case I had to later remove border: 0; because it would prevent default buttons of forms to be displayed as buttons.)
Does this * really mean "anything"? Is it valid as used above for fixing the three pixel text jog problem? If not, do I really have to define this zoom property for any single HTML element for which it occurs? (It currently occurs for some headers, <div>, "<div> <div>" sequence, some <p>.)
Any comment welcome...
Emilie
P.S.: I tried it and DW doesn't flag that problem any more, but I'm unsure how much I can trust it.

The behavior is unexpected. The file paths are
correct?

I have one iPhone 4s, one iPad 2 and wife's iPhone 4s. yesterday I have updated all with ISO 8 under one apple id, now my problem is that in same WiFi when Any of phone receive phone all the three gazettes ring simultaneously . how to resolve this.

I have one iPhone 4s, one iPad 2 and wife's iPhone 4s. yesterday I have updated all with ISO 8 under one apple id, now my problem is that in same WiFi when Any of phone receive phone all the three gazettes ring simultaneously . how to resolve this.
regards
rbv

Tell your wife to get her own Apple ID. If you do not want continuity/handoff to work with calls, on both devicesgo to Settings==>>FaceTime==>> Turn OFF iPhone cellular calls.

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

HT1926 My iTunes installer was interrupted & now it's telling me "Your system has not been modified. To complete these operations at a later time, please run the installer again". The only problem is, I've tried to run it about six or seven times. Can s

My iTunes installer was interrupted & now it's telling me "Your system has not been modified. To complete these operations at a later time, please run the installer again". The only problem is, I've tried to run it about six or seven times.

I'm not sure anyone here knows more about the Java plugin than you do...
Were you starting the control panel from disk as administrator because it didn't work starting it through the Start menu (if you have Control Panel set to View by Category, the Java control panel is under "Programs").

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

The problem about vrrp

Dear all,I have a problem about vrrp,my core switch is cisco 3750x and huawei S5700-28C-EI, after I configured vrrp between them,the switch log got the error problem as follow:
*Jan 11 00:01:43.111: %VRRP-6-STATECHANGE: g1/0 Grp 3 state Backup -> Master
*Jan 11 00:01:43.111: VRRP: tbridge_smf_update failed
*Jan 11 00:01:44.187: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:46.539: VRRP: Advertisement from 10.252.200.36 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:50.323: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:51.707: VRRP: Advertisement from 10.252.200.36 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:52.079: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
*Jan 11 00:01:53.079: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0
If cisco and huawei cannot interconnect with each other?

Can you post the interface config from the huawei and cisco device?
HTH,
John
*** Please rate all useful posts ***

Guys, my browser is going crazy and every website that I am on changes in about 10 seconds to 2 minutes to another webpage. I even downloaded a newer 5.0 version of firefox and I am having the same problem.

Guys, my browser is going crazy and every website that I am on changes in about 10 seconds to 2 minutes to another webpage. I even downloaded a newer 5.0 version of firefox and I am having the same problem.

Your System Details are showing Fun Web Products. Suggest you look in Add-ons - Extensions and Plug-ins, and Control Panel>Add/Remove programs or >(newer version) Programs and Features. You could also do a search of your computer.
Fun Web Products(associated with MyWebSearch) always seems to cause problems, Alexa does, too, but less often - there may be conflicts.
I'm not an expert on these two products. I'm afraid I can only alert you to the problems. Google will show you plenty of evidence of problems. You might also try the Search Firefox Help box above - a gold mine but it usually requires a lot of digging.
You can start Firefox in Safe Mode - Hold Shift Key down as you double click on the Firefox icon>ignore the page that opens>Continue. If that improves things you could do a little troubleshooting(Safe Mode, Problematic extensions etc), use default theme, -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
http://support.mozilla.com/en-US/kb/Troubleshooting%20plugins

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue.

A switch on/off problem about the relay in a loop

hi group:
I am developing a project based the Ni-sci-1160. Now I meet a problem about switch on/off in a loop.
for example: I creat a loop, and continually check a boolean. if the boolean is true, then the realy is closed, otherwise the relay is open. The problem is when I make the boolean is true, the corresponding relay is not always on, but just on-off, on-off,on-off. I don't know why? Is there any good idea to fix it?
the easy example codes is attached here , thanks for you help.
Attachments:
relay_problem.vi ‏19 KB

Try moving that first DAQmx function out of the while loop. Since it is called switch set and Reset, I'm guessing it is resetting the status of the switch every iteration of the while loop which probably means setting it back to false. It looks like an initialization type of function which means it should only be run once.

The three problems about flex

Similar Messages

Maybe you are looking for