The UniquekeyValidator Rule is not working in the EO edit dialog.

The UniquekeyValidator Rule is not working in the EO edit dialog. We have Jdeveloper9i V. 9.0.3.2. The unique flags are checked in the primary key attribute and the custom message is never showed.
Is there a Known bug about that? if yes.. does exist any patch to fix that?
Thank u

Thank u for your answer.
Yes, of course .. i�ve already apply the unique key validator for the entity.. so that custom error message is the error im trying to get in the application.
Other issue is when im trying to edit that error message: when im going to edit the message the previous error im entered is not there. Is it normal?

Similar Messages

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

  • The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

    The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Has anybody experienced the iPhone off switch not working all the time.

    I have an iPhone 5, it's about 16 months old and it has experienced an annoying issue.  The off button does not work all the time, sometimes I have to press it multiple times and other times it just works.  The worst case is when it does not work at all, very frustrating.  I didn't expect this type of issue for a phone that is not even a year and a half old.
    I did some searching on the internet and there are 2 schools of thought, the first is that this is a hardware fault and Apple know about it but won't admit it because it would cost them too much to repair/replace phones with the issue.  The second school of thought is that it is a software issue and a backup/reset/restore will fix it; I tried doing this but it did not resolve the issue.
    Further digging seemed to suggest that it was really a hardware fault and the only option was to get a refurb from Apple for a ton of money, not cool.
    Anyway, if anyone has any more information that could help me resolve this issue I would greatly appreciate it.
    //*eggbox23

    @diesel vdub, thanks for your suggestion, I setup an appointment with the Genius Bar and found out in about 5 minutes that everything I have read up on so far is true.
    Firstly the technician admitted that there is a sporadic fault on the iPhone 4s and iPhone 5 switches, something to do with the design of the switch that included a rubber element that rolls up (whatever that means) and causes the switch to fail. He then indicated that the iPhone 5s does not have the issue because the switch has been completely redesigned.
    Since I was stupid enough to not take out the extended warranty the only options he gave me were to purchase a new phone or to get a refurb for $269, not cool. Why would anyone think that a phone would not work correctly for 2 whole years when the phone only cost about $600!
    Since I have about 7-8 months left on my phone contract I am not prepared to pay for either option.  I find it amazing that a phone can develop this type of issue in such a short time and then expect the customer to pay for their failures.  Apple supposedly sells a very high quality product for a very high price, looks like they have taken a step back from this philosophy.
    I am disappointed in the options that he gave me (I don't blame the technician) but I suppose I expected more from Apple in terms of quality and service.
    //*eggbox23

  • Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

    Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

    Same problem here on my 4s: Control center music controls do not work.
    Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

  • I have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

    have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, you may have to take the MBP to the Apple Store  to have it checked.
    Best

  • My iPhone 5 shows the flashlight icon but in a shadowed way, as if it is disabled. Also the rear camera is not working. The iOS version is 7.1.1

    My iPhone 5 shows the flashlight icon but in a shadowed way, as if it is disabled. Also the rear camera is not working. The iOS version is 7.1.1

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do

    hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do will apple take it back

    pvonk wrote:
    Apple does not replace or take back devices that are damaged.
    Depends on the damage. The battery came loose in my iPhone. When Apple opened the phone to redo the glue they discovered the speakers were also loose. Apple replaced the phone.
    If the glue was properly bonded or had some other flaw Apple will replace the device if the device is still under warranty.

  • I can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

    i can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

    Hard Reset
    Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
    if no result try to back up and restore via itunes on a computer. 
    if wont restore try this
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • My brother have given me his I-phone3, But he lives in US, he has given his phone in India, The sim card is not working with the phone. What should I need to do.?

    My brother have given me his I-phone3 But he lives in US he has given his phone in India  The sim card is not working with the phone What should+I need to do?

    Send it back to him and have him unlock the phone for you so you can use it with your carrier.

  • The Port : 6001 is not working in the system

    Hi Experts,
    OS   :  AIX 6.1
    SAP :  SAP Netweaver EHP1
    In the OS level the Port : 6001 is not working and giving the out put as...
    pb2adm> telnet abcprdpb2 6001
    Trying...
    telnet: connect: A remote host refused an attempted connect operation.
    Virtual host : abcprdpb2
    As it is the BI java stack system & I configured the SMD & wily in the system. From the BI java stack system the wily agent is not working and it uses the port : 6001.
    Now the issue is regarding to the port : 6001
    when telnet in the same system which is Virtual host : abcprdpb2 is not working and which I have given the output above. It is working when I telnet to the other systems. Please see the output  below...
    pb2adm>  telnet abcprd001 6001
    Trying...
    Connected to abcprd001.
    Escape character is '^]'.
    Connection closed.
    From other system  virtual host : abcprd001
    As I have checked with the firewall team and said it is fine in the system and same us AIX team also. But still port : 6001 issue is not resolved in the Virtual host : abcprdpb2
    Can you please let me know how to open the port : 6001 in the Virtual host : abcprdpb2 and also how we can confirm that port : 6001 is opened or blocked in the Virtual host : abcprdpb2.
    Thanks & Regards,
    Sandeep.

    Hi,
    The both mentioned virtual systems are in different LPAR's (Physical host).
    Already I have checked the /etc/services and looks every thing is fine in the file. I have also checked the file inetd.conf  and I didn't find any thing # on the Telnet.It seems every thing is fine in the both files.
    Can you please look in to it and provide some thing which I have to look in the OS level.
    Thanks & Regards,
    Sandeep

  • Reading the EDI X12 file not working with the patch 8233048

    Hi
    I have installed the latest path 8233048 on my windowsXP system, now I am not able to see the File being polled and processed.
    In b2b.log I can see the last message as "oracle.tip.adapter.b2b.data.MsgListener:run start listening on message" after that no log.
    In b2b_dc_transport.log, I can see only
    2009.02.07 at 20:35:45:236: B2BStarter thread: (DEBUG) TransportProperties.TransportProperties():http.receiver.registry_port=5110;smtp.receiver.protocol=imap;PROTOCOL_ENDPOINT=null;file.receiver.polling_interval=30;polling_interval=30;http.receiver.instance_name=IP;
    2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) initialize TransportReceiver: [IRIS_Transport_Server < file > < IRIS >]
    2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) FileReceiver.init() started ....
    2009.02.07 at 20:35:45:287: B2BStarter thread: (DEBUG) FileReceiver.init() completed.
    Could you please tell me if I need to do any changes.
    This is working on b2b with only patch: 5907304 which is installed in another windows XP system.
    The same configuration with the latest patch is not working.
    Edited by: Praveena Paruchuru on Mar 7, 2009 7:56 AM

    Hi Dheeraj,
    I have restarted my system many times, not only B2B.
    I have taken the print out of both the tip.properties and compared line by line and wanted to check out which line was making it not to function.
    I added the mismatching lines one by one by one, it was working for all teh updates. Finally I changed it to my new tip.properties.
    Then surprisingly it is working.

  • The multi-tabs is not working all the time. Windows7 Firefox 4.0.1 I have the correct opetions set for multi-tabs.

    The multi-tabs is not working. I have the correct options set for multi-tabs. But when I open Firefox and try to add a site from Bookmarks it uses the same tab that is opened.

    Right click a tab and you will get the option to bookmark all tabs. Or use keyboard '''Alt + B''' which opens the old style menu. You can make changes to Firefox, as explained in this post: [/questions/799856#answer-155765]

  • The back buttoin is not working on the broswer.

    the back button is not working. do i need to reinstall?

    See also http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • The Enter Key does not work in the location bar; I have to manually select the "Go To" icon since upgrading to Version 10.

    I just upgraded to Firefox 10. When I manually enter a URL into the location bar, the "Go To" arrow does not have focus, so the Enter Key will not work. I have to manually select the "Go To" arrow to navigate. Any suggestions?

    This could be the AVG safe search extension. If you have that installed, try disabling it. Instructions here: [[Using extensions with Firefox#w_how-to-disable-or-remove-extensions]]

Maybe you are looking for