The ' usage' app showing incorrect data usage.

The amount of data used shown in usage app is incorrect when i checked the actual amount used with carrier.
Sometimes its much larger and sonetimes much smaller than actual amount used.

Hello,
I understand that you are having problems with the cost control application in your Firefox OS device. In order to better understand and investigate on the issue that you are encountering, please reply to this message with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [http://mzl.la/Gzz6Kp this link] if you need help finding the Build ID of your phone.
* Please provide the exact steps to reproduce the issue you are encountering.
* Who is your current cell phone carrier?
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we will have all the information needed to investigate into this. Thank you for your help and we look forward to hearing from you!
- Ralph

Similar Messages

  • Reserved fields in the catalog record have incorrect data???

    I inserted the orginal installation disk for the Mac mini. I ran the verify disk. Then nine of these messages in red showed - "Reserved fields in the catalog record have incorrect data." I then did repair disk and now it shows that 1 volume could not be repaired. I have the MiniStack as well. I am assuming that the Hard Drive is the one needing repair. Not the MiniStack which also has OS installed along with Classic. How can I fix the disk? How important is the message in red?

    You have directory damage.
    Use Disk Warrior to repair the drive: http://www.alsoft.com
    Explanation of what directory damage is and what causes it: http://alsoft.com/DiskWarrior/details4.html
    The other option is to wipe your drive and re-install everything.

  • Crystal report showing Incorrect data against Bex Query

    I have created Crystal report on top of Bex Query, I have not done any calculations in the report, just dragging structure and key figure in the report, ran for one month, when I compare with Bex Query with same period, it is showing incorrect data.
    I don't know what can be wrong here?
    We are Business Objects 3.1 SP3.
    Thanks,
    Ravi

    HI,
    I would suggest you trace the workflow in Web INtelligence according to these notes:
    Tracing:
    Unix : Note 1235111
    Windows : Note 1260004
    and then post a link for downloading the trace files here.
    regards
    Ingo

  • 4 devices linked to 1 itunes acct.  how do i create an account for each device but keep the music/apps purchased to date

    2 ipod touches, 1 iphone, 1 ipad all linked to the same itunes account.  would like to know if there is a way to have 3 seperate accounts and still keep the music/apps purchased to date.  1 ipod has been lost....how do I delete it from the itunes account.  Is homesharing something that i can use for this situation?
    any help is much appreciated!

    You cannot

  • FYI DU error:"Reserved fields in the catalog record have incorrect data"

    I had a very perplexing problem...
    My iMac G5 was shutting down by itself so I took it to Apple and had the power supply replaced. After it was repaired I was concerned about the hard drive health after the unexpected shutdowns. So I ran Disk Utility and encountered the following...
    The iMac G5 is running OS 10.4.6.
    I ran "Repair Disk Permissions" from Disk Utility and encountered no errors.
    I ran "Verify Disk" from Disk Utility on the drive and I get these results (copied from DiskUtility.log):
    Verifying volume “TheDisk”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Reserved fields in the catalog record have incorrect data
    Checking volume bitmap.
    Checking volume information.
    The volume TheDisk needs to be repaired.
    Error: The underlying task reported failure on exit
    Disk Utility stopped verifying “TheDisk” because the following error was encountered:
    The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    This occurs whether I run it while booted from the hard drive or the restore disc. While booted from the restore disc, running repair disc indicates that the failure could not be fixed.
    Booted from the hardware test disc and all tests passed.
    Booted from TechTool Pro disc and all the tests passed.
    Booted from Disk Warrior (had to get the "free" update to boot my iMac G5) and rebuilt directory. No errors reported.
    Still same error reported in Disk Utility. ???
    Booted iMac in 'safe' mode. Rebooted iMac normally.
    Disk Utility now reports success!

    Sorry but this is not assistance to you but an additional request for help from someone!!!
    I had the same thing occur just now!!!! I have used everything in site and keeps returning............
    Hope someone has an answer as to why this occured....

  • Is there aproblem with the settings app measuring cell data usage incorrectly?

    My Settings app in my iPad (3rd gen) under General>Usage>Cellular Usage is telling me I have used 10.2 TB received and 713 GB sent. The Cellular Network Data>Usage had been only 240MB in received data just two days before. I had not used the iPad in two days. It was sleeping and not shut off. My battery level also had only changed a few percent. My Verizon account is still showing the correct 240 MB received. Is it possible for the iPad to continuously access cellular data while asleep? Could this be a problem with the Settings app? Could this be from location services? I had the Map open, but it had been closed. It was still showing in the background apps witht a double touch of the start button.

    Thanks SergZak. My iPad has only been active for about two weeks. I don't see how it could have accumulated such an astronomically high number. I found one other thread from April that showed the same problem with  a number of other users (New iPad shows incorrect cellular data usage statistics?). I am hoping that Apple is aware of this and working on a correction. Although upon checking my Verizon account the numbers were accurate to true usage, I am concerned that incorrect accumulation of statistics could lead to overcharges. If I had actually used 10 TB (10,000 GB) of data at $10 per GB over my allotmet of 2 GB, I would have owed Verizon $98,000.

  • After upgrading to elements 12 the metadata shows incorrect date created?

    After upgrading from elements 8 to 12 all the pictures in the album have a new date created in the metadata the is the date I upgraded.  this is incorrect because the picture was not created on this date but moved or updated.  This is a problem when running things like screen savers that go by date created.  How do I fix the metadata to reflect the actual date the picture was created?

    After upgrading from elements 8 to 12 all the pictures in the album have a new date created in the metadata the is the date I upgraded.  this is incorrect because the picture was not created on this date but moved or updated.  This is a problem when running things like screen savers that go by date created.  How do I fix the metadata to reflect the actual date the picture was created?

  • Report Viewer shows incorrect data when viewing pages from last to first

    Post Author: Fmorales
    CA Forum: .NET
    Hello.
    I've made a huge report with Crystal Reports for Visual Studio 2005, and sometimes the Report Viewer show data with errors.
    If I see all pages of my report in order, 1 first, then 2nd, 3, 4... until the last one.... The report is always correct.
    If I see all pages in reverse order, 1 first (shown by default), then last one, then last one-1.... until 2nd.. All years show incorrect, except first one... 
    In an outer section, for every year, there is a final row which shows summarize calculated data. The error consists in that every value of the row is 0.
    It seems that Crystal Report calculates while showing, that's good.. but... Why does it ignore the data before when I see directly the last page?? It forces me to see all pages one by one in ascendant order to ensure data is correct.. I must fix that error.
    The way I calculate data in the problematic summarize row is a bit complicated, but I'll try... Let's focus in one only column (the other ones are similar). The summarize value is a formula which simply show a global value :
    WhilePrintingRecords;
    CurrencyVar margenActual;
    which is being increasing or decreasing along the group:
    WhilePrintingRecords;
    CurrencyVar actual:=actual+CurrentFieldValue; 
    if {PresupPeriodifMesesAux_DS.TIPO} = 'PAGOS' then         CurrencyVar margenActual:=margenActual-CurrentFieldValueelse    CurrencyVar margenActual:=margenActual+CurrentFieldValue;
    DefaultAttribute
    It is placed in the backgrond property of a CrossTab cell in a hidden pre-section... Well.. I know it's a bit complicated, but I have to do that way because it was the only trick I found to make a summarize file before printing data summarized (that's why the line "CurrencyVar actual:=actual+CurrentFieldValue;" appeared in formula). So I also wanted to use this formula to acummulate "margenActual".
    In the inner section I reset the actual value (this value always go fine):
    WhilePrintingRecords;
    CurrencyVar actual:=0; 
    Before end of year I reset the margenActual value:
    WhilePrintingRecords;
    CurrencyVar margenActual:=0; 
    I've tried multiple combinations (using WhileReadingRecords instead WhilePrintingRecords) but data is incorrect or I cannot get rid of visualization page's problem....
    Any idea?
    Thanks a lot

    quote:
    Originally posted by:
    ntsiii
    If you were previously using <mxXML> you WERE using
    e4x.
    So remove that tag, create an instance variable of the same
    name, typed as xml, and in your result handler, do as VarioPegged
    suggests, though I would cast/convert to xml first:
    companies = XML(event.result);
    trace(companies.toXMLString()); to look at your xml
    var xlCompanies:XMLList = xmlCompanies..company; //all such
    expressions return XMLList, never XML
    trace(xmlCompanies.length()); //
    Tracy
    Ok so the ID of the mxXML was being interpreted as an E4X
    variable at compile time?
    I tried changing the name of the ID of the HTTPService call
    from "marketData" to "MDATA" and assigning the variable marketData
    to the result of the HTTPService query, which if I understand you
    correctly should basically make everything work as it was before,
    but it seems to be a problem.
    when I try to run it puts an exclamation point on this line
    <toolbox:TreeMap id="treeMap" width="1200" height="800"
    dataProvider="{marketData}"
    labelField="@cname" weightField="@amount"
    colorFunction="{itemToColor}"
    toolTipFunction="{itemToToolTip}"/>
    That code refers to a SWC file. Apparently it wants
    marketData to be a data provider. If I change the dataProvider
    reference above to "MDATA" (the ID of the HTTPService) the App
    compiles, but I get two errors at runtime:
    TypeError: Error #1009: Cannot access a property or method of
    a null object reference.
    ReferenceError: Error #1081: Property @age1 not found on
    mx.rpc.http.mxml.HTTPService and there is no default value.
    What should I change this reference to? It won't compile if I
    use the variable I made for the e4x results and it is reading
    gibberish if I have it read directly from the
    HTTPService....?

  • Images sent to and from the Message app show up Black.

    When I am sent an image or I send an image in iMessage or as an MMS I can see the image when it's hits my phone or iPad but once I press it to open the image it's black. That's happening on my  iPhone 4 and my iPad 2 (both running on 5.0.1 I have yet to update to 5.1). I cannot seem to get any image sent via iMessage or MMS to show up. I see them fine in emails and whatsapp but not the Message app.
    Anyone able to advise on this?
    Many thanks

    I guess I was expecting to talk to people that new what they were talking about. All I did was ask a simple question and got nothing back from you that would solve the problem.  Sorry but your sugestions did not help me. I'll wait to see if I get any other feed back. Don't get me wrong as I do appreciate your input, but it's not solving my problem. Why is apple making it so hard to get into the memory of this one app? I have never had a phone that I could not access all data until I got an iphone.

  • SQL Dev 1.5.3 Data Grid showing incorrect data

    After upgrading to SQL Dev 1.5.3, I have seen instances of incorrect data displayed in the data grid (when displaying many records at a time), both in the Table Browser and in SQL Worksheet.
    For example, in the grid, it shows a value 1234 for a column. Now when I query just that row, the correct results are shown.
    Has anyone noticed this?
    Thanks,
    Manish

    Any updates on this? I am hitting this bug and it makes life very uncomfortable as I cannot trust the results.
    SQL Developer 1.5.3 + JDK 1.6.11 on Windows XP.

  • Bex Query showing incorrect data

    Hi Experts,
    I have a Bex query on an infoset. The infoset is based on Sales Order Line Item DSO and Sales Order Condition DSO. I am refering Net value from Sales Order Line Item DSO. In the query, the values of Net Value is not coming correctly. When i check the value in Sales Order Line Item DSO it shows 100. However, in the query it shows 500. When i checked the infoset, it had 5 records. In each record, the net value was 100. What should i do to get the correct value of Net Value in the query.
    Have anyone faced similar problem ?
    Please reply as soon as possible.
    Thanks,
    Saachi

    Hi Sachi,
    This is a common problem in infoset.
    Sales order line item - SLI say
    Sales order condition - SC say.
    The value you see in your net value field depends on your join condition in the infoset.
    Currently you have join in such a way that 1 record in SLI correspods to 5 records in SLC (this is as per your join condition), hence you see this error. Youcan manupilate your join condition to get the required result, if this is viable.
    However, in most cases you may not be able to alleviate the fields defining the join.
    Say your sales order and item form the joining fields, then in sales order condition DSO you have 5 records for that sales order and item.
    The way you could probably avoid net value getting multiplied 5 times is by using exception aggregation  with reference char a characteristic in the query.
    The ref char should uniquely identify the 5 sales order item condition lines.
    (basic principle - we have to net value/ no of lines in Sales order condition DSO [5 in this case] .)
    The problem, however is, whenever you consider uniqueness defining fields, you would look at the keys of DSO, because they define uniqueness. One could have multiple infoobject when defining a DSO key.
    So you would'nt be able to define any record with only one particular infoobject(ref char), based on which you could define the  exception aggreation.
    You could define one more data field in the DSO which is a concatenation of all of its keys and then use it in exception aggreg as a reference char in the query.
    One more way is to load data from the two DSO to further cubes to achieve the requirement.
    I think, this is the limitation with the infoset.
    Please let me know if you find any other solution.
    Hope it helps,
    Regards,
    Sunmit.

  • Why doesn't the music app show the album artwork?

    When I open the music app, everything is fine, all except for some albums are missing thier artwork. The funny thing is, when you tap on the album, and it flips up and shows all the songs in that album, the album artwork shows up on the side, but when you go back to the albums, the artwork isn't there again. I know that the artwork isn't avaliable sometimes, but in this case, the artwork is there somewhere, because it shows up when you open the album. Is there some way I can get it back? Thanks

    Sync with iTunes on your computer selecting to remove the affected albums from your iPad and then sync again selecting to move them back to the iPad.

  • Im having problem in Mail. Sent is showing incorrect date and also not showing sent emails that have been successfully sent. Is it a virus?

    Having trouble in MAIL. Running MacOSX(10.6.8) and in MAIL the SENT both doesnt show sent messages( successfully received) and doesnt show correct date sent. Any ideas??

    Not sure about the time stamp problem, but the missing "Sent" mails problem is not uncommon. This problem is one that a lot of people have and in my opinion, I think it's a problem with Apple's mail application, nothing at the user's end.
    Does this happen only when you include an attachment or does that matter? Also, does it only happen when your outgoing message is delayed a bit? Check your junk/spam folder to see if your sent messages went in there.
    This doesn't fix anything, but you might change your e-mail settings so that all new mails are automatically sent Bcc to yourself.
    Sometimes the "missing" sent mails are not going in the right folder. I'm sure you probably already know, but in the left-hand column in MAIL, under Mailboxes, there is a second "sent" folder way at the bottom, depending on your other e-mail accounts, such as Yahoo or Gmail). Many people have discovered their missing "sent" e-mails in those.
    It is a big hassle, for sure, and has been officially reported. Users with complaints are being told that Apple's Intrusion Detection and Prevention (IDP) systems block the connection from a user's e-mail client when it attempts to store outgoing e-mails, which contain attachments, to the users'  sent folder.
    This is supposedly due to the Mac OS/Mac Mail sending non-standard or erroneous commands to the server, emulating the activity which would be generated by an attacker attempting to abuse an exploit in the IMAP server. I doubt you are doing anything wrong, so it's just a matter of waiting for them to FIX this annoying issue.

  • Why does the Adobe App Mgr incorrectly insist on a Creative Cloud subscription?

    I have valid and active licenses for many Adobe products, all associated with my Adobe ID. I was using a CS6 license key just fine, until the Adobe Application Manager started complaining and asking for a cloud sub renewal. I do not want to run this under a cloud sub. I have the full license key already. But the Adobe App Mgr does not provide a way to enable it. What to do?

    And on Windows you can't ignore, skip or postpone that installation.

  • Why would the settings app use cellular data

    when i go into settings and can choose what apps use cellular data, 'settings' is a choice and in fact has used 99.4 kb of data. anyone know why? thanks.

    trying one more time to get an answer for this.

Maybe you are looking for

  • Can't delete file from desktop. Can't get info. Doesn't appear in ls -a. What?

    Hi folks, I file has appeared on my desktop. I believe it's a temp file created while downloading something in Safari. When I try to delete it, I get "The item x can't be moved to the trash because it can't be deleted": I tried right click > Get Info

  • Can't View on NTSC Monitor

    For some reason, I cannot view sequences on my NTSC monitor. When I go to log and capture, it does play back and I can see it on the computer, but whenever I go to "External Video," it is selected to off and even if I change it to "All Frames," it st

  • "No qualifying products found to apply this update" for Adobe Acrobat 8.1.2 Security Update 1 patch

    I am attempting to deploy the security update for Acrobat 8.1.2 [http://www.adobe.com/support/security/bulletins/apsb08-15.html] via computer startup script in AD. I am receiving this error message; "No qualifying products found to apply this update"

  • ITunes crashes each time I try to access Music Videos

    I have downloaded (twice) the newest version of iTunes (7.2?) and have access to the music store, but each time I try to access the music videos, iTunes closes and also states that I do not have album artwork on my computer. I have run diagnostics (s

  • Photoshop CS4 transparent layer only, no picture.

    When I open a jpg, bmp or any other picture file in photo shop all that appearsis the checkerboard tranparent layer. Thee is no picture to edit. What is wrong with photoshop? It also takes forever for the blank transparent picture to load.  Windows V