The use of restricted key figures in real time scenario

Hi all,
Please let me know the use of restricted key figures in real-time business scenarios....plz someone explain it with example...
Also, can restricted keys be defined globally with same infoprovider...???????????
Your response is thankfully acknowledged,
thanks and regards,
shalini.

Hi,
You can restrict the key figures of an InfoProvider for reuse by selecting one of more characteristics. The key figures that are restricted by one or more characteristic selections can be basic key figures, calculated key figures or key figures that are already restricted. Which means you can define and use them globally in reporting for a particular infoprovider.
Example:
You have to show the sales for different product typessay 1, 2, 3, 4, 5, 6, for a company code.
now you can define a RKF with company code and sales keyfigure.
In the report, in columns, you use this RKF in new selection and restrict it with product type in 6 diff columns.
New Selection.
Restrict it with RKF
Restrict it with product type 1.
similarly for others..
Hope this helps you....

Similar Messages

Using Non cumulative key figure in Real time cube

Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
Ravikanth

Hi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.

Divide key figures in real time cube by using planning function

Dear all,
I have a real time cube which contains one key figure which is defined by 10 characteristics.
For one country, the users types the values fpr the key figure in a wrong format, so I have to divide those values by 1000.
I have tried to do this with a planning function "Revaluating" and a filter (on this spec. country). I have combined this two element in a planning sequence. When I run this I just get the error message "planning function ended with errors" without any further information.
Is there an other way to devide values within the cube? the BI release is 7.0.
Any help would be great.
Best regards,
Stefan from Munich/Germany

Hi Stefanos,
What you are doing is absolutely right.. However, I want to ask a few question..
1. Are the characterestic values included in the filter ? ie. If you want to change for Country: UK, is UK present in filter?
2. Are there any other characteristics that you have not included in the function and are getting changed by chance ? Like you might need to include 0fiscyer in To Change if you are assigning 0Fiscper.
3. Write a small FOX function with hardcoded values to check if the system is accepting the values or not..
It should work.. Please write back in case you need more help..
Regards, Rishi

Customer Ext Variable is NOT working correctly in the Restricted Key Figure

Hi all,
   I have created a variable ZVCBLMTH (Period from 01/1996 to Last Month) with reference to
    0CALMONTH and it will be populated through Customer Exit and it works fine.
    In the selection for 0CALMONTH, I gave the range as '05/2008' to '08/2008' and this new
    variable passed the value of range as '01/1996' to '04/2008' in RSRT.
    The properties of the variable are:
          Type of Variable - Characteristic, Processing by - Customer Exit, Variable Represents - Interval
          and Variable is - Optional.
          No change in the result after changing the 'Variable is' from Optional to 'Mandatory'.
This variable is used in Restricted Key Figure to calculate the number of matching records between
   01/1996 & 04/2008 and somehow it is not recognizing this variable and NOT passing the results correctly.
   But, there are records with 0CALMONTH between 01/1996 & 04/2008.
   How could I test that which value is passed into the Restricted Key Figure for this variable, PLEASE ?
   Thanks in advance.
Regards,
Venkat.

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Restricted Key Figure and : Change Variable in WAD

Hi everybody,
I have a restricted key figure in my query, which is restricting all sales volumes of a product by time variable.
I am using this restricted key figure instead of a real filter on the whole query because I have to view the total volume of this product and the volume in this year.
This works very well, but I have no possibility to change the value of the time variable in the restricted key figure in WAD by a generic navigation block.
How can i do this?
Thanks,
Alex

Hi...
The Web item Generic Navigation Block displays the navigational state of a query view in the Web application in the form of a table. All characteristics and structures in the query view are listed in the table and their filter values are displayed. You can change the navigational status of the query view. You can filter according to single values and remove the filter again.
You want to see the results in tabular form and to be able to navigate
through those results using key figures and characteristics.
1. From the Start menu, open the Web Application Designer and start the Web
Application Wizard
a) Choose Start → Programs → Business Explorer → Web Application
Designer → Tools → Wizard.
Choose Next to skip the start page.
2. Select the Generic Navigation Block item and accept the default settings for
this item.
a) In the Select Web Item dialog box, choose Standard Items → Generic
Navigation Block, then select Next to transfer the item into your Web
template.
3. Assign the query Customers/Sales as a Data Provider
to the Generic Navigation Block web item. After assigning the Data Provider,
accept the default values for the item attributes.
a) Choose Query.
b) The Open Query / View dialog box appears.
From the Roles, select the query for Reporting→ Unit: BEx
Web Application Designer → Lesson: BEx Web Application Wizard →
Exercise → Customers/Sales .
Choose OK. The dialog box closes and you return to the Web application
Wizard. Choose Next to reach the Edit Attributes dialog box. Since you
want to accept the default properties of the item, choose Next.
c) In the Overview dialog box, you see all the items you have selected so far.
Add the Table Web item to your Web template and accept the suggested settings
for this item.
a) In the Overview dialog box, choose Add Item to add an additional item to
your Web template. In the Select Web Item dialog box, select Standard
Item → Table.
Choose Next in order to transfer the item into your Web template.
5. Assign the same Data Provider to this item as you did for the Navigation Block.
Accept all the default settings for this item. Arrange the Web template to have
the Generic Navigation Block before the Table.
a) Both items in the Web template use the same Data Provider. Therefore, you
can use the same entries for this item. Choose Next.
b) Leave the properties of the table item unchanged. Skip over the Edit
Attributes dialog box by choosing Next.
c) Both Web items now appear in the Overview dialog box. Change the
sequence of the two web items so that the Web template starts with the
Generic Navigation Block. Use the up and down arrow icons to move your
web items. Choose Next.
6. Save the Web template.
a) You do not have to make any entries in the Save Web Template dialog box.
Choose Save to save your Web template.
Save the newly-created Web template in your Favorites.
give Description: ..................
give Technical name: ...........
7. Display the Web template in the browser.
a) Choose Display theWeb template in theWeb browser .
8. Exit the Web Application Wizard.
a) Choose Exit. The Wizard window closes and the Web template is opened
in the Web Application Designer where you can make additional edits
as required.
with regards,
hari kv

How to show filter values of restricted key figures in BEx Analyzer?

Hi,
I have following report.
                     Quantity USA        Quantity China
Product           100                        150
Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
E.g.:
Country          USA
                     Quantity USA
Product           100
If I put both restricted key figures in the query, this line is not shown.
Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
Thanks!
Regards,
Pascal

Hi,
I have following report.
                     Quantity USA        Quantity China
Product           100                        150
Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
E.g.:
Country          USA
                     Quantity USA
Product           100
If I put both restricted key figures in the query, this line is not shown.
Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
Thanks!
Regards,
Pascal

Steps to create a Restricted Key Figure

Hi,
I am trying to create a BEx Query and want to create a Restricted Key Figure.
I am using BEx 7.x.
Please help me with steps to create a Restricted Key FIgure.
Thnaks and Regards,
Shreyas Shah

Hi Shreyas,
Please find the step by step to create a restricted key figures.
Procedure for Defining a new restricted key figure:
1. In the InfoProvider screen area, select the Key Figures entry and choose New Restricted Key Figure from the context menu (secondary mouse button).
If a restricted key figure has already been defined for this InfoProvider, you can also select the Restricted Key Figures entry and then choose New Restricted Key Figure from the context menu.
The entry New Restricted Key Figure is inserted and the properties for the restricted key figure are displayed in the Properties screen area.
2. Select the New Restricted Key Figure entry and choose Edit from the context menu (secondary mouse button).
The Change Restricted Key Figure dialog box appears.
You can also call the Change Restricted Key Figure dialog box from the Properties screen area by choosing the Edit pushbutton.
You make the basic settings on the General tab page.
The text field, in which you can enter a description of the restricted key figure, is found in the upper part of the screen.
You can use text variables in the description (see Using Text Variables).
Next to that, you can enter a technical name in the Technical Name field.
Underneath the text field, to the left of the Detail View area, the directory of all objects available in the InfoProvider is displayed. The empty field for defining the restricted key figure (Details of the Selection) is on the right-hand side of the screen.
3. Using drag and drop, choose a key figure from the InfoProvider and restrict it by selecting one or more characteristic values. See Restricting Characteristics.
You can also use variables instead of characteristic values. However, note that you cannot use the following variable types in restricted key figures for technical reasons:
Variables with the process type Replacement with Query (see also Replacement Path: Replacement with Querys)
Variables that represent a precalculated value set (see also Details)
You can use these variable types to restrict characteristics in the rows, columns, or in the filter.
4. Make any necessary settings for the properties of the restricted key figure on the other tab pages. See Selection/Formula Propertiess.
5. Choose OK. The new restricted key figure is defined for the InfoProvider.
Let me know if this helps.
Thanks
Sachin

Restricted key figure

HI,
can any body explain me what is the difference between Restricted key Figure and the filter option in BEX reporting.

Hi Ali,
If you want restrict particuler key figure based on characteristic value, that you have to go for restricted key figure.
For example: You have calender year month data from 2005 to 2006.An dyou have also have sales data for the period.
If you want see the say some feb 2005 to may 2006.
than you can use restricted key figure to see the values.
where as Filter will show the values which you have filtered irrespective of key figure (only characteristic value).
just go throw the below description.
Hi,
Restricted key figure:
Use
You can restrict the key figures of an InfoProvider for reuse by selecting one or more characteristics. The key figures that are restricted by one or more characteristic selections can be basic key figures, calculated key figures, or key figures that are already restricted.
Procedure
Defining a new restricted key figure
1. In the InfoProvider screen area, select the Key Figures entry and choose New Restricted Key Figure from the context menu (secondary mouse button).
If a restricted key figure has already been defined for this InfoProvider, you can also select the Restricted Key Figures entry and then choose New Restricted Key Figure from the context menu.
The entry New Restricted Key Figure is inserted and the properties for the restricted key figure are displayed in the Properties screen area.
2. Select the New Restricted Key Figure entry and choose Edit from the context menu (secondary mouse button.
The Change Restricted Key Figure dialog box appears.
You can also call the Change Restricted Key Figure dialog box from the Properties screen area by choosing the Edit pushbutton.
Calculated key figure:
Use
In the Query Designer, you use formulas to recalculate the key figures in an InfoProvider so that you can reuse them. Calculated key figures consist of formula definitions containing basic key figures, restricted key figures or precalculated key figures.
Procedure
Defining a New Calculated Key Figure
1. In the InfoProvider screen area, select the Key Figures entry and from the context menu (secondary mouse button click), choose New Calculated Key Figure.
If a calculated key figure has already been defined for this InfoProvider, you can select the Calculated Key Figures entry and, from the context menu, choose New Calculated Key Figure.
The system adds the New Calculated Key Figure entry. The properties for the calculated key figure are displayed in the Properties screen area.
2. Select the New Calculated Key Figure entry and, from the context menu (secondary mouse button), choose Edit.
The Calculated Key Figure dialog box appears.
You can also call the Change Calculated Key Figure dialog box from the Properties screen area by choosing the Edit pushbutton.
Formula:
Use
You can recalculate the key figures in a structure using a formula. You can include basic key figures, restricted key figures, and calculated key figures in the formula definition.
Procedure
Defining a Formula
1. If the query does not yet have a key figure structure, create a New Structure in the Rows or Columns of the Query Designer by highlighting the row or column directory using the secondary mouse button and selecting New Structure from the context menu.
2. If the structure does not yet contain any key figures, use drag and drop to transfer a (basic) key figure of the InfoProvider into the directory of the new structure.
3. Select the structure directory, and choose New Formula. The New Formula entry is inserted and the properties for the formula are displayed in the Properties screen area.
4. Select the New Formula entry and, from the context menu (secondary mouse button), choose Edit. The Change Formula dialog box appears.
You can also call the Change Formula dialog box from the Properties screen area by choosing the Edit pushbutton.
Regards,
Shailaja

Restricted Key Figure Column heading text missing

Hello,
I created a restricted Key Figure in a BEX report and dragged this RKF into the columns tab. when i execute the report , the column header text for the restricted key figure is missing. The values are fine, but the header column text for that KF is missing. any help?
Thanks
justin

Hi Justine...
I think u r doing something wrong..........Either u can create Global Restricted Key(Infoprovider level) or Local restricted ket figure(Query level)..........If u create Global........then in the left pane............Right click on the Keyfigure >> New restricted Key figure...........to create in the Query level..........In the context menu>> choose Edit........... or select the heading of the Rows or Columns directory
and use the right mouse button to choose New Structure..........In both the cases....there is a Description Field........u hav to write the description there............U can change the technical name also.........then save it........
May be it is a temporary bug............just come out the query..and again reopen it......
Regards,
Debjani.....

Problem with Restricted Key figure!

Hello BW Gurus,
Currently I am having problem with a report that is using a restricted key figure in the formula. When I filter down this restricted key figure, it is working fine but when I use this restricted key figure in formula that calculate greater than value, its giving me wrong figure and when I calculate less then value, its giving me zero total result. I am drilling down this restricted KF on a hierarchy. Did I miss any setting or do I need to do anything extra for this?
Please let me know and thanks in Advance,
Vaghar.

In that case create two calculated keyfigures CKF1 and CKF2 such that
CKF1 = ((Count >100)*1 + 0)
CKF2 = (Count<100)*1 + 0)
and then define Greater Count as a formula such that
Greater Count = Count (CKF1)
and similarly Lesser Count = Count (CKF2).
where Count is a data function which gives a value of 1 when the operand <>0 and returns a 0 when the operand = 0.
Hope this helps.

Constant Selection in Restricted Key Figure

Hi Gurus,
I am using BeX 3.x and in one of the reports, we use a restricted key figure that has the Profit Center Object[restricted to a few Hierarchy Nodes] and a Key Figure.
But there is an option called 'Constant Selection' that is selected in the Profit Center object in this restricted key figure. Can you please tell me what checking the 'Constant Selection' option would achieve?Can you explain using a simple example how it works?
Thanks a lot!!!!

Hi,
The Constant Selection function allows you to mark a selection in the Query Designer as constant. This means that navigation and filtering have no effect on the selection at runtime. This allows you to easily select reference sizes that do not change at runtime.
For More info, refer to this link.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e7/5f983c1a356858e10000000a114084/frameset.htm]
Thanks & Regards,
Pradeep

Access to Restricted Key figure

Hi,
I have a restricted key figure. I want only few users to have access to this restricted key figure and want to put some sort of authorization on this restricted key figure. While creating authorization I am giving the type of authorization components as RKF (restricted key figure) but there is no place where i can mention the id of restricted key figure.
Regards
Nitin

Hi KN,
Please look at the below link for authorization regarding Query definition such as RKF, CKF, Variable and all other objects,
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a68a7e07211d2acb80000e829fbfe/content.htm
Hope this helps
AP

Please provide real time scenario for when we use object type in PL/SQL.

Hi Experts,
When we use this kind of code in PL/SQL block.
CREATE OR REPLACE TYPE sample_object IS OBJECT
(id       NUMBER
,name     VARCHAR2(30));
CREATE OR REPLACE TYPE sample_table IS TABLE OF sample_object;I have read some docs ,but I didn't get any information where exactly we use this.
Please provide one real time scenario with an example.
How this is different from record.
Thanks in advance.

Hi,
For an example please have a look at this....
CREATE OR REPLACE TYPE FML_DAT_ITEMS_OBJ AS OBJECT
                  (F_NAME VARCHAR2 (20), L_NAME VARCHAR2 (20));
CREATE OR REPLACE TYPE FML_DAT_ITEMS_FTAB AS TABLE OF FML_DAT_ITEMS_OBJ;
CREATE OR REPLACE FUNCTION GET_FML_ITEMS_DAT (PFML_NR IN NUMBER)
   RETURN FML_DAT_ITEMS_FTAB
   PIPELINED
AS
   OUT_REC   FML_DAT_ITEMS_OBJ;
BEGIN
   SELECT FML_DAT_ITEMS_OBJ ('peter', 'zwan') INTO OUT_REC FROM DUAL;
   FOR I IN 1 .. PFML_NR
   LOOP
      PIPE ROW (OUT_REC);
   END LOOP;
END GET_FML_ITEMS_DAT;To view the o/p:
SELECT * FROM TABLE (get_fml_items_dat (5));
F_NAME, L_NAME
peter,zwan
peter,zwan
peter,zwan
peter,zwan
peter,zwan Refer these links to know more about the topic...
http://www.oracle-developer.net/display.php?id=207
http://www.oracle-base.com/articles/misc/pipelined-table-functions.php

Query Designer restricted key figures using a prompt value

Hallo Experts,
I would like to restrict key figures after user has beeen prompted to enter a date. I have 2 key figures:
a) KF1, Date1
b) KF2, Date2
User should be prompted to select a specific date: e.g. 01/2011. After selecting/entering the prompted date value, it should be given to date objects for intance Date1=01/2011 and Date2=01/2011.
How could I achieve it in Query Designer without using customer_exit function? Reason is that non-experienced users will use this report and they should not be confronted with complex query. Do you have any idea?
Many thanks
Mamadu

Hi,
I assume that you need to restrict the value of keyfigures by date based on user input data on variable selection screen.
First create one user input variable on your date field say for eg calday.
Now restrict your KF1 with calday and choose that vairable which you created.
For second KF2 which seems to me need to be restricted with offset of +1 based on the date entered by the user.
So restrict this KF2 with calday and use the same variable with offset of +1
I just misunderstood you ned calmonth or day because in requirement you have given month but you are calling it as date.
If its month then replace calday with calmonth..
Hope it helps.
Regards,
AL:
Edited by: AL1112 on Dec 21, 2011 9:42 AM

Restricted key figure doesn't work when restricted objected used in Structure

Hi Experts,
We've a requirement where user wants to restrict ABC key figure with z object. This z objects also used in structure as well, because of that this restricted key figure is not working.
We understand it can't be used in two structure and user wants to keep this object in structure as well.
Is there a workaround to make it work?
Requirement brief overview:
Say I've restricted key figure gross avail percentage and which is restricted by retail group A and B. This retail group is also used in Structure as well (in row). As said users want to keep retails group in structure and want to restrict only one key figure with two retail group A and B.
But this combination is not working. Please can someone recommend any other way to achieve this requirement.
Thanks,

Hi Yasmine,
Yes, I've reloaded the data again. Also, I've mapped correctly in cube. But still I can't see data.
I've checked customer master data , there is no data for this field.
In transformation I've mapped retail group with the new field as well.
When I tried to activate master data , it's saying it's possible only via attribute change run.
I've realised 0CUSTOMER_ZRETGRP (old field) also used in two aggregates.
Do I need to add this in aggregates?
How to activate master data so data will appear in cube?
Is there any programme to activate via attribute change run?
Thanks

The use of restricted key figures in real time scenario

Similar Messages

Maybe you are looking for