"The User profile Service service failed at the logon. User profile cannot be loaded".

Hi
I'm having the below problem while i'm starting to logon to my system.  when i entered  the password, i'm getting the below msg as 
"The User profile Service service failed at the logon. User profile cannot be loaded."
i m trying since morning . 
please help me in this issue .
This question was solved.
View Solution.

Hi,
You could try the following.
Shut down the notebook.  Tap away at f8 as you start the notebook to enter Windows Recovery Console.  Use the arrow keys to select Safe Mode and hit enter.  If windows will load in this mode, from the Start Menu, click All Programs, click Accessories, click System Tools and launch System Restore.  Pick a restore point at least 48 hours before the log-on issue and then proceed with the restore process.  When complete, Windows will reboot as normal so check if you can now log in correctly.
Another option if the above does not help is as follows.
Shut down the notebook.  Tap away at f8 as you start the notebook to enter Windows Recovery Console.  Use the arrow keys to select 'Start Using Last Known Good Configuration' and hit enter.
If neither of the options above are successful, try running through the procedure detailed in the guide on the following link.
http://www.sevenforums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-lo...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Windows Server 2012 Login Issue "The User Profile Service service failed the sign-in. User profile cannot be loaded."

    Whenever I try to login to our Exchange Server, I receive the following error:
    "The User Profile Service service failed the sign-in. User profile cannot be loaded."
    The issue affects more than one user.
    Relevant Info:
    Server Version: 2012 Datacenter
    Exchange Version: 2013
    The Exchange server is virtualized.
    What I've tried:
    1) Remote Desktop from a workstation on the network
    2) Remote Desktop from Virtual Machine Manager
    3) Connect via console from Virtual Machine Manager
    4) Accessing the server via Computer Management and adding my user account to Allow Login via Remote Desktop
    5) Creating a new user account for myself by copying the account of a user who can get in
    6) Rebooting
    I'd appreciate any suggestions.

    Hi Aaron,
    I would suggest you to check the event log .
    Maybe this issue due to the permission of profile folder , please refer to the following link :
     http://helgeklein.com/blog/2013/09/error-message-explained-user-profile-service-failed-logon/
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • User Profile Service failed the logon. User profile cannot be loaded

    Hey
    when I try to log on to the computer using a domain account, I get "User Profile Service failed the logon. User profile cannot be loaded" it allows me to login using the local account. I have restored the computer as far
    back as it can go, I have taken it off the domain and re-joined it, I installed a program called 'Glary utilities 5' and ran a registry repair and that did not work either. I am now out of ideas :(
    Was hoping someone has any more ideas I could try before doing a fresh install.
    Thanks in advance

    Hi,
    Have you checked the solutions mentioned in the the followng link?
    You receive a "The User Profile Service failed the logon” error message
    http://support.microsoft.com/kb/947215/en-us
    Check your event viewer for detailed information, the following link can also be helpful
    http://blogs.technet.com/b/asiasupp/archive/2010/11/24/user-profile-cannot-be-loaded-with-event-id-1509-detail-the-filename-or-extension-is-too-long.aspx
    Yolanda Zhu
    TechNet Community Support

  • The User Profile Service service failed the logon. User profile cannot be loaded.

    I have one Admin profile (me)  and 1 guest profile (Guest)
    I have followed the instructions in Microsoft KB 947215 
    In step 4 it says to locate the S-1-5 folders, which I have done, find the two matching file numbers and change the .bak/ba extensions. Problem is I have 4 folders and I am not sure which to rename. If I try to add the .ba extension on the file named
    S-1-5-21-803116559-3522019405-271708535-1001 I receive an error :
    The Registry Editor cannot rename S-1-5-21-803116559-3522019405-271708535-1001. Error while renaming key.
    Have I picked the wrong file to rename? Please advise. Hopefully I have provided sufficient information. If not please advise.
    Here is a list of the folders, and their respective ProfileImagePath and State information:
    S-1-5-18
     = Value name: ProfileImagePath Value data: %systemroot%\system32\config\systemprofile
            = Value name: State Value data: 0
    S-1-5-19
     = Value name: ProfileImagePath Value data: C:\Windows\ServiceProfiles\LocalService
            = Value name: State Value data: 0
    S-1-5-20
     = Value name: ProfileImagePath Value data: C:\Windows\ServiceProfiles\NetworkService
            = Value name: State Value data: 0
    S-1-5-21-803116559-3522019405-271708535-1000
     = Value name: ProfileImagePath Value data:C:\Users\UpdatusUser
            = Value name: State Value data: 0
    S-1-5-21-803116559-3522019405-271708535-1001
     = Value name: ProfileImagePath Value data:C:\Users\TEMP
            HAS NO STATE INFO
    S-1-5-21-803116559-3522019405-271708535-1001.bak
     = Value name: ProfileImagePath Value data:C:\Users\me
            = Value name: State Value data: 8000
    S-1-5-21-803116559-3522019405-271708535-501
     = Value name: ProfileImagePath Value data:C:\Users\Guest
            = Value name: State Value data: 80

    Hi,
    If you want to modify the registry, you must have administrator privilege.
    Since no other administrator account in your computer, you may have to active the built-in administrator account.
    For detail steps, please refer to the similar thread.
    I receive error message: The user profile service failed the logon. User profile cannot be loaded
    http://answers.microsoft.com/en-us/windows/forum/windows_7-security/i-receive-error-message-the-user-profile-service/38844b82-a2c1-4fa2-9802-a5318d6f7831?auth=1
    Regards,
    Ada Liu
    TechNet Community Support

  • User Profile Service failed the sign-in. User profile cannot be loaded - For any new accounts created

    I'm sharing this issue we encountered earlier today so that others might benefit from what we discovered.
    We're using Win8.1 Ent and on two of the systems, any accounts created encounter the following message upon attempted login (i.e. login fails):
     "User Profile Service failed the sign-in. User profile cannot be loaded"
    The event viewer shows this:
    Windows cannot copy file
    \\?\C:\Users\Default\AppData\Local\Microsoft\VSCommon\12.0\SQM\sqmdata-7696-039-00000.sqm to location
    \\?\C:\Users\TEMP\AppData\Local\Microsoft\VSCommon\12.0\SQM\sqmdata-7696-039-00000.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Solution which worked for us
    In our instance either setting the appropriate permissions on the affected file, or deleting the file resolved it.

    I had a similar problem, and raised a Premier case, which is mentioned here:
    http://blogs.msdn.com/b/asiatech/archive/2014/01/30/new-user-gets-event-1509-after-deploying-ie9-10-11-packaged-by-ieak.aspx
    It seems this issue with SQM/CEIP creating a poorly ACE'd SQM file has been around for a very long time, with many causes being the installation of Internet Explorer (as was my case, of deploy IE10 to Win7), but other reasons also occur (as in your case
    with VS).
    It seems to me that this is a defect in the SQM/CEIP component, but the issue does not consistently occur is all scenarios, which appears to be an excuse to leave the defect uncorrected, so we have to implement ugly workarounds.. :(
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Windows 8 "The user Profile Service service failed the sign-in. User profile cannot be loaded."

    Hello All,
    OK here is what i'm trying to figure out. First off i am new to my company and still trying to learn the in and outs but have already been thrown into the lions cage by myself. I inherited a network that is run on Windows Server 2008 R2. The domain consists
    of XP,Windows 7 and Windows 8 machines. Here is the issue i am facing.  
    Every once in a while (usually after a few hours of inactivity) when a user goes to log into the machine they receive an error stating  "The user Profile Service service failed the sign-in. User profile cannot be loaded.". However
    this only happens to the windows 8 machines and like i mentioned earlier it usually happens after a brief inactivity period. Now restarting the machine always works(100% of the time) but this super annoying. I have also completely restarted the server just
    to find out the problem resurfaced later that day.
    Any idea on how to fix this issue? Like i mentioned this only happens to the Windows 8 machines. Is there something i should do on my server to prevent this?
    Any help would be greatly appreciated!
    Thank you

    This one might help.
    http://support.microsoft.com/kb/947215
    Also might ask them over here.
    https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • The user profile service service failed to logon user profile cannot be loaded on Windows 7 Home Premium

    Good Afternoon Everyone,
    I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my  issue
    ... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
    Very Respectfully,
    Jesse

    "Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
    Good Afternoon Everyone,
    I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my  issue
    ... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
    Very Respectfully,
    Jesse
    Home Premium cannot logon to a Domain, nor can it be set to try it.
    when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
    Noel Paton | Nil Carborundum Illegitemi |
    CrashFixPC | The Three-toed Sloth

  • I have this message when i try to log onto my home pc "The User Profile Service, service failed the logon. User profile cannot be loaded." can I recover my music and photos from iCloud from another user account?

    I get this message when i try to log onto my home pc account "The user Profile Service, service failed the lofon. User profile cannot be loaded" can I recover my data from another/new user account from my iCloud account??

    "Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
    Good Afternoon Everyone,
    I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my  issue
    ... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
    Very Respectfully,
    Jesse
    Home Premium cannot logon to a Domain, nor can it be set to try it.
    when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
    Noel Paton | Nil Carborundum Illegitemi |
    CrashFixPC | The Three-toed Sloth

  • The user profile service service failed the sign-in. User profile cannot be loaded.

    Hi,
    While i login to windows 8.1 with normal user not able to login. error saying that The user profile service service failed the sign-in. User profile cannot be loaded. I am able to login  in Administrator account. Kindly provide me solution for
    this.
    System - Windows 8.1 Enterprise x64.
    Thanks in advance for your support.

    Hi,
    Thank your for your sharing and update.
    If more questions, please feel free to ask in technet forums, and we will be happy to help.
    Best regards
    Michael Shao
    TechNet Community Support

  • The User Profile Service service failed the logon. the user profile cannot be loaded

    I have been runnung Vista home premium with no problems for some time. Now I want to add a second user. Each time I create a new user and then try to logon as the new user, I get this message:
    The User Profile Service service failed the logon. the user profile cannot be loaded.
    Other answers I have found relate to corrupted administrator accounts but that is not the problem I have.
    What can I do to enable the use of other users on this computer?

    Hi,
    Thank you for posting in Microsoft TechNet Forum.
    First of all, for further troubleshooting, may I ask some questions:
    1.     How did you create a new user? Is it a account belonged to administrator group or standard user group?
    2.     Does this issue occur with the current user? Do you receive any error code?
    Based on my research, you can visit the following Microsoft KB on User Profile Service (ProfSvc) issue.
    Error message when you log on to a Windows Vista-based computer by using a temporary profile: "The User Profile Service failed the logon. User profile cannot be loaded"
    http://support.microsoft.com/kb/947215
    Meanwhile, to share an article on the Error "The User Profile Service failed the logon. User profile cannot be loaded."
    http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
    Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Hope this helps. Thanks.

  • The user profile service failed the logon. User profile cannot be loaded, WIN7 dual boot

    Hi all,
    I just got a new x201, which I installed ubuntu on a second partition. For a while the two systems were getting along fine, and I was able to switch between them without problems. on my last login it won't accept my credentials (pw or biometric) and says "The user profile service failed the logon. User profile cannot be loaded" and then returns to the login screen. Any ideas on how to fix this without nuking the system?

    Hi, I'm having the exact same problem as little_teapot , I cannot get past the login screen. I went onto the Toshiba support site which asked me to do a system recovery using the F8 key on start up. So I tried this but the problem I'm having is when I turn on the computer holding in the F8 key, nothing happens, it just goes through start up as normal and then it just ends up at the login screen telling me that the user profile cannot be loaded. I've tried it a couple of times and I don't know if I'm doing something wrong with the safe mode start up? Also the notebook is a P500/020 and is only 2 months old running Windows 7? if anyone can help I would greatly appreciate it.
    Thanks

  • Trying to log in and message reads: User Profile Service failed the logon. Profile Cannot be loaded

    When I try to log on by clicking my user icon, I'm getting a message that reads:  The User Profile Service service faied the logon.  User Profile cannot be loaded.

    Hi,
    Check the guide on the link below to see if any of the options ( particularly using windows System Restore ) helps.
    http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loade...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • User Profile Service service failed the sign-in. User Profile cannot be loaded

    One of my Windows 8 Workstation creating a temp profile everytime we login, we tried to perform the step to fix the issue http://www.eightforums.com/tutorials/38838-user-profile-service-failed-sign-fix-windows-8-a.html.
    After perform the steps unable to login and getting an error "User Profile Service service failed the sign-in. User Profile cannot be loaded"
    Then we tried to perform the System Restore, but the system is failed to restore to any date. Now we cannot login with any of the Network User, however we are able to login with Local user account. 
    How to fix this issue ?

    Error
    1/14/2015 17:02
    Win32k
    253
    None
    A pointer device does not have a mandatory co-ordinate property.
    Warning
    1/14/2015 17:02
    Microsoft-Windows-Winlogon
    6001
    None
    The winlogon notification subscriber <Profiles> failed a notification event.
    Warning
    1/14/2015 17:02
    Microsoft-Windows-Winlogon
    6001
    None
    The winlogon notification subscriber <Sens> failed a notification event.
    Error
    1/14/2015 17:00
    Microsoft-Windows-User Profiles Service
    1500
    None
    Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.  DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory
    request was completed.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG1 to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG1. This error may be caused by network problems or insufficient
    security rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE. This error may be caused by network problems or insufficient security
    rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG2 to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG2. This error may be caused by network problems or insufficient
    security rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TM.blf to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TM.blf.
    This error may be caused by network problems or insufficient security rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000001.regtrans-ms to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000001.regtrans-ms.
    This error may be caused by network problems or insufficient security rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000002.regtrans-ms to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000002.regtrans-ms.
    This error may be caused by network problems or insufficient security rights.  DETAIL - Access is denied.
    Error
    1/14/2015 17:00
    Microsoft-Windows-User Profiles Service
    1511
    None
    Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    Error
    1/14/2015 17:00
    Microsoft-Windows-User Profiles Service
    1515
    None
    Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-Winlogon
    6004
    None
    The winlogon notification subscriber <Profiles> failed a critical notification event.
    Level
    Date and Time
    Source
    Event ID
    Task Category
    Error
    1/14/2015 17:02
    Win32k
    253
    None
    A pointer device does not have a mandatory co-ordinate property.
    Warning
    1/14/2015 17:02
    Microsoft-Windows-Winlogon
    6001
    None
    The winlogon notification subscriber <Profiles> failed a notification event.
    Warning
    1/14/2015 17:02
    Microsoft-Windows-Winlogon
    6001
    None
    The winlogon notification subscriber <Sens> failed a notification event.
    Error
    1/14/2015 17:00
    Microsoft-Windows-User Profiles Service
    1500
    None
    Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.  DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory
    request was completed.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG1 to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG1. This error may be caused by network problems or insufficient
    security rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE. This error may be caused by network problems or insufficient security
    rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG2 to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG2. This error may be caused by network problems or insufficient
    security rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TM.blf to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TM.blf.
    This error may be caused by network problems or insufficient security rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000001.regtrans-ms to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000001.regtrans-ms.
    This error may be caused by network problems or insufficient security rights.  DETAIL - Access is denied.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-User Profiles General
    1509
    None
    Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000002.regtrans-ms to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000002.regtrans-ms.
    This error may be caused by network problems or insufficient security rights.  DETAIL - Access is denied.
    Error
    1/14/2015 17:00
    Microsoft-Windows-User Profiles Service
    1511
    None
    Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    Error
    1/14/2015 17:00
    Microsoft-Windows-User Profiles Service
    1515
    None
    Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
    Warning
    1/14/2015 17:00
    Microsoft-Windows-Winlogon
    6004
    None
    The winlogon notification subscriber <Profiles> failed a critical notification event.
    Error
    1/14/2015 17:00
    Win32k
    253
    None
    A pointer device does not have a mandatory co-ordinate property.

  • How to reset firefox without openning the firefox as after repeated installation it fails to start and gives error message " Your Firefox profile cannot be load

    "Your Firefox profile cannot be loaded. It may be missing or inaccessible."
    I dont know why this message has appeared. i have tried uninstalling and reinstalling firefox after completely deleting all files and folders of mozilla from program files and registry.Despite of that firefox will not start and keep giving error message. i can not reset firefox without openning firefox.Profile does not open in window search.
    On openning app data profile manually there is nothing much i can do as it shows [General]
    StartWithLastProfile=1
    [Profile0]
    Name=default
    IsRelative=1
    Path=Profiles/2tt76737.default
    how shall i fix and restore firefox as i am desperate please , please help....

    Does that Profiles/2tt76737.default still exist?
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • When I download and try to install Thunderbird I get the message "Your Thunderbird profile cannot be loaded, it may be missing or inaccessible".

    Because of a virus, I redownloaded Thunderbird 24.4.0 and it completed until trying to open Thunderbird when I get the message "Your Thunderbird profile cannot be loaded. It may be missing or inaccessible." I know the profile exists in a "recovered files" folder. I've tried to move it to the current Thunderbird folder but get the same message. I've tried to follow a Mozillazine article but it's too complicated. Is there any online help, such as chat or phone?

    I think I have finally figured out how to reply to you. Even though your email says to reply to [email protected], that just goes into dead space.
    So to answer your question, the profiles.ini file has in it:
    <pre><nowiki>{General}
    StartWithLastProfile=1
    {Profile0}
    Name=default
    IsRelative=1
    Path=Profiles/ghdigdus.default</nowiki></pre>
    Also, I want to mention that there is a Thunderbird folder in C:\ just above the Users folder. It has two profiles in it, one of which is the e00qmtzd.default folder.
    Are we getting closer to solving this problem?

Maybe you are looking for

  • Mini DVI to Projector Problems

    I could use some help figuring out why this setup isn't working... I'm trying to connect my (early 2009) Mac Mini to my Optoma Projector. The projector isn't getting a signal at all. I already have a 50ft VGA cable running through my attic, so I'm tr

  • Problem generating an IDOC

    Hi I have setup a partner profile with  outbound parameters having message type WMINVE for inventory counts. But when I am creating a inventory document I dont get the idoc created for the inventory document. I hope the question is clear. If not plea

  • Does anyone know anything about nathanjr?

    I just purchased my MacPro about a month ago, and it is saying that I share the computer with nathanjr. I am wondering if I haver a virus or worm or it is something someone might know something about. Thanks I don't want to share my computer with nat

  • OWB Performance

    Can someone give me pointers on how can the mappings execution performance can be improved? Settings on O/S level, Database , mappings etc. Thanks.

  • HT204655 Can I create folders and subfolders in the new Photos on my mac?

    I've just started using the new Photos app in the latest Yosemite update on my Macbook Pro. Until recently I was using Aperture to sort all my photos into folders and subfolders - I think they were called "events" or "projects" in Aperture.  In Apert