The website is not centered in the middle of my screen, right side is gone and left side is white. Only in safetymode the screen is centered in the middle

Websites are dislayed in the middle of the screen. Half the website is gone on the right side. on the left side it is white. Only when i startup in safetymode the websites are displayed in the center of the screen

When going to a website the picture was small - tried changing the Zoom size , tried Zoom Reset - the text did change size but the layout distorts - found under View - Zoom - Zoom Text Only was checked --- Removed this check mark and the website returned to normal size and Zoom worked normally again. I am 99.9999% sure I did NOT check this myself and there is no one else on the computer to cause it. Maybe this will help.

Similar Messages

  • Technical Details: The website does not support encryption for the page you are viewing. Information sent over the internet withour encryption can be seen by other people while it is in transit

    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit
    == This happened ==
    Not sure how often
    == started few days ago. previously never happened before.

    I was loading a website, it then stated as below, it wasnt any of the problems stated below.
    SERVER NOT FOUND
    # Check the address for typing errors such as
    ww.example.com instead of
    www.example.com
    # If you are unable to load any pages, check your computer's network
    connection.
    # If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    Thus i checked the Page Info, it states that:
    Security Info on page:
    '''This website does not supply ownership information.
    Connection not Encrypted.'''
    Technical Details:
    The website does not support encryption for the page you are viewing.
    Information sent over the internet withour encryption can be seen by other people while it is in transit

  • In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

    In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

    The only difference I see between looking your site between Firefox and IE is that Firefox is slightly less tolerant of a narrower window than IE but I don't see parts
    missing they may be covered up but that happens on both browsers where the picture overlays wording down left side.
    I can't really tell whether you are saying Firefox or IE is missing parts, but they look the same to me. First time looked it like Firefox was missing portion but it was just dropped down for some distance text and pictures were not missing.

  • The website can not be displayed Forms 10.1.2.3 / IE8 / Windows 7

    Hi,
    first the problem description:
    I run a Forms-web application from a shortcut on the desktop.
    For example:
    "C: \ Program Files (x86) \ Internet Explorer \ iexplore.exe" "http://k1r.bf.ia:7778/forms/frmservlet?config=sdb_Java"
    The resolution is a DNS server. Even if I use the IP Address, I have the same problem:
    In IE appears
    *"The website can not be displayed"*
    when I press F5 it runs all and the page is displayed. why ???????
    Forms 10.1.2.3
    Client Windows 7 32Bit
    IE 8.0.7600
    Java 1.6.0_23
    Formsweb.cfg:
    basehtml          = d:/orabase/oas/forms/webutil/server/webutiljpi.htm
    jpi_classid          = clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
    jpi_mimetype     = application/x-java-applet;jpi-version=1.6
    Since it works fine with Firefox 3.6.13,
    someone can help me ?
    Alfred

    I looked at our code and this is what we do to show any URL (like a Reports PDF or another website) in a new browser window from Forms.
    We've implemented a pluggable Java component which is called from Forms via set_custom_item_property to show a given URL in a new browser window.
    set_custom_item_property('TEST.BROWSERBEAN', 'SHOW_URL', l_url);
    In the pluggable Java component the code invoked when setting that property first tests the Java runtime version:
    a. if it's 1.6.0_23 or higher then it simply calls Applet.getAppletContext().showDocument(<url>, "_blank");
    Java 1.6.0_23 fixes bug 6946479 by opening the browser window in the same iexplore.exe process via an IE add on API. This reestablishes the implementation behaviour as it's been with Java 1.6.0_17 and below, i.e. the bug exists in 1.6.0_18-1.6.0_22.
    The side effect of this bug fix is that by calling showDocument() (or the Forms API show_document) the problem with IE being unable to correctly load a site during the startup of the browser gets circumvented since there is no new browser process.
    Thus - if it's an option for you - just use Java 1.6.0_23 on the clients.
    For a description of the bug look e.g. at the following site. The description is E-Business Suite specific but it's a Java plugin bug:
    http://blogs.oracle.com/stevenChan/2010/12/mismanaged_session_cookie_issue_fixed_ebs.html
    Bug in the Sun Java bug database:
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6946479
    b. if the Forms applet runs on Java 1.6.0_22 or below our PJC implementation uses Java-to-Javascript communication to run a Javascript function to open the URL in a new window in the same browser process, e.g.:
                        JSObject jsWindow = JSObject.getWindow(this.applet);
                        jsWindow.eval("window.open('" + urlToShow + "', '_blank');");
    I hope this helps.
    Regards,
    Andreas
    Edited by: Andreas Leidner on Jan 11, 2011 5:25 PM

  • When I click on buttons/pull down tabs on a variety of websites , I can see that I have pressed the button but the website does not recognize the action

    When I have visited travel websites I can not 'click' on the Calendar. I tried to buy a book and checked off to be visit as a guest - and the website did not recognize the button I had checked off. I tried to edit on 'online profile" and the website does not recognize that I have clicked the 'edit' button.
    I have not had problems before and do not understand why this has started to happen.
    I am running mac osx 10.7.5 and firefox 21

    If this was only on one or two sites, I'd suggest "Option #1" below and it's still a good idea. However, when several sites are involved, I begin to suspect an add-on. Hence, "Option #2" below.
    '''Option #1'''
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r / Command+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    (WIN) orange Firefox button (or Tools menu) > Options > Advanced<br>
    (MAC) Firefox menu > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (complete any pending transaction first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Tools menu > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?
    '''Option #2'''
    Try the sites in Firefox's Safe Mode. That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?

  • I uninstalled yesscript but now the website will not work properly

    I uninstalled yesscript but now the website will not work properly.
    == URL of affected sites ==
    http://sears.com

    Hello Anonymous.
    Although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    As for your problem, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • I am trying to register my iPhone 4S for mobile phone insurance but the website does not recognise the serial number. Has anyone experienced this?

    I am trying to register my iPhone 4S for mobile phone insurance but the website does not recognise the serial number. Has anyone experienced this, and any idea how I can rectify the problem?

    When using the iPhone with the Windows OS, you need to have the Apple Mobile Device Service running. It should start automatically when you start the computer, but sometimes things happen. Use this support document to try and restart the service. See if that helps.
    http://support.apple.com/kb/TS1567

  • Your connection to the website is not encrypted

    connection was reset...and when i click on the error msg just beside the website link... it says... "connection to the website was not encrypted" i had to reload the website again and again until the webpage load properly.... in some occassion it load the page but in a simple template. what is wrong? this happen to any website i go into

    I don't know how to use the Firefox browser since it isn't safe to use it since it is not encrypted, so I use Safari on the Mac.

  • When I try to open a video from the website Youtube I got this message that I didnt before I uograde to Firefox 7.0.1 : "Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."

    When I try to open a video from the website Youtube I got this message that I didnt before I uograde to Firefox 7.0.1 : "Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."
    That didnt happen before until I made an upgrade to 7.0.1

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • When insert my lexar USB flash drive I get the message that the disk was not readable by this computer.  It has worked previous to this and I do not want to lose the data by reformatting the drive.  How can I reformat this drive and not lose my data?

    When insert my lexar USB flash drive I get the message that the disk was not readable by this computer.  It has worked previous to this and I do not want to lose the data by reformatting the drive.  How can I reformat this drive and not lose my data?

    You can't reformat it and not wipe everything on it.
    Have you tried a different USB port?
    Only other option, back it up on a different computer.

  • I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled.  Is there something I can do to clear this?  4 people in 4 different states that called me all said the same thing.

    I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled.  Is there something I can do to clear this?  4 people in 4 different states that called me all said the same thing.

    Settings > General > Reset > Reset Network Settings
    Contact the carrier to troubleshoot.

  • Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.

    Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.
    How can I recover the NAS back up to put on my new Time Machine.
    Talking to Apple Support Adviser was a waste of time on case number 239647273
    Any thoughts or pointers?

    Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
    You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
    Apple AirPort Time Capsule Support
    Lion Communities
    Cloning as a Backup Strategy
    Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
    Others who are asking the same question:
    http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

  • Try doing the update would not download. So like a dummy I did what I went and downloaded the new itunes so it would update itunes did it before and it worked at first it would tell me that I was missing MSVCR80.dll so I downloadeditagainandnowitwon'twork

    try doing the update would not download. So like a dummy I did what I went and downloaded the new itunes so it would update itunes did it before and it worked at first it would tell me that I was missing MSVCR80.dll so I downloaded it again and reinstalled it and now it won't work at all

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • TS1702 I just restored my iPhone from a backup, and 17 apps couldn't be restored because "the app could not be found."  But it's sitting right there in iTunes under Apps.  What's up with that?

    I just restored my iPhone from a backup, and 17 apps couldn't be restored because "the app could not be found."  But they're sitting right there in iTunes under Apps.  What's up with that?

    You haven't told us what you've done to troubleshoot thus far.  What's up with that?

  • I can't redeem my iTunes gift card, my phone is un activated, help desk has not helped. What does it mean my phone is un activated and how can I redeem my gift card for my 5c living I. The Caribbean

    I can't redeem my iTunes gift card, my phone is un activated, help desk has not helped. What does it mean my phone is un activated and how can I redeem my gift card for my 5c living I. The Caribbean

    (Typing all in capitals is considered shouting, makes posts difficult to read and may mean that people are less likely to reply.)
    There isn't a phone number for iTunes Support.
    If you've forgotten your answers to your security questions then you can get them reset : If you forgot the answers to your Apple ID security questions
    If you have a credit card on your account then its details have to complete - and asking for their details is also a way of checking that you have a valid billing address in that country. As long as you are buying content for yourself and not trying to gift content (you can't use your balance for gifting) then the purchase price (plus any applicable taxes) should be deducted from your balance. If it's not then you contact iTunes Support :  http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for

  • Sequences - Test Organzer:  How to move more than 1 test case at a time

    Hello, I would like to be able to move multiple test cases within a sequence but I do not know how.  If I highlight multiple rows and select Move Test Case only 1 of the rows will move.  This is fine if your test package only has a few transactions b

  • Delivery cost in PO

    Hi,    I have create the PO account assigned to cost centre K and it has multiple account assignment. The distribution is on the basis of quantity and in case of partial invoice it is to be distributed proportionally. The pricing condition in PO are

  • Cannot find Microsoft Word installed on your system

    Hi, Wonder if anyone can help... I just tried to generate my printed documentation in RoboHelp and everytime I try I get the error message 'Cannot find Microsoft Word installed on your system'. It is installed, and when I go to Tools > Options > Tool

  • Best way to use 3 ipods

    Hello All! I have a library which I store on an external hard drive which is composed of ripped CDs, Amazon.com downloads, and DRM+ and DRM- songs from the itunes store. My spouse has a 20 GB photo ipod that we used to share but which will now be her

  • DO ANY OF THE QUICKTIME CONVERSION SETTING ALLOW FOR WEB FRIENDLY HD

    i have a 3 minute movie....i want to make it sendable via the internet....it is current HD with 1440 x 1081 aspect ratio. It seems to me the Export - Using QuickTime Conversion option would be a great solution....however every setting i choose render