The whole configure over WAN thing is confusing me I don't want anyone to be able to access my airport extreme over the WAN.  How can I check to make sure that is the way I have it setup?

I just bought a new airport extreme and I want to make sure that is NOT set up for "configure over WAN".  How do I check to make sure that is how I have it set up?  I only want access to the base via WPA2 password

Open AirPort Utility, select the AirPort Extreme, and click Manual Setup
Click the Base Station tab located just below the row of icons
Remove any check mark that might be in the box next to Allow Setup over WAN
Click Update to save your settings and the AirPort Extreme will restart in 25-30 seconds
For what it is worth, if you leave the box checked, any computer that tries to access the settings on the Airport Extreme will be asked for the device password....not the wireless network password.

Similar Messages

  • How do I check to make sure that I uninstalled Adobe Reader?

    I'm new to the Mac world, so I'm still learning as I go. I do not want Adobe Reader on my Mac any longer. I think I delted everything, but do not know how to check to make sure it's uninstalled. Can anybody help???
    Warmly,
       JustJenni

    Welcome to Apple Support Communities
    http://www.ehow.com/how_6245350_uninstall-reader-mac-os-x.html

  • In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    If you think this is a bug, you can report it here:
    Apple - Mac OS X - Feedback

  • HT201365 I like the additional security features but don 't want to type in a password every time I use my phone.  How can I turn off the requirement for a password but leave "Find my Phone" active?

    I like the additional security features but don 't want to type in a password every time I use my phone.  How can I turn off the requirement for a password but leave "Find my Phone" active?

    Settings>General>Passcode Lock...enter your passcode, then: Turn Passcode Off.

  • Other members of my family are able to access my ".me" e-mail account. How do I set my account so that only I am able to access that account?

    Other members of my family are able to access my ".me" e-mail account. How do I set my account so that only I am able to access that account?

    Are you sharing the same iCloud account with your family members and they all have access to the password?
    If so, that's why. iCloud accounts are not designed to be shared if you want to keep your email, contacts, calendars etc. seperate.

  • I can insert images in gmail. However, I cannot insert a screen capture on one computer when I can on another. So I think its the way I have Firefox setup...but I don't know how to change it.

    In gmail I enabled insert images. I can now copy/paste an image....but not a screen capture. I'm using the same process to capture the screen shot and paste as I do in Word. It works on one computer...but not another.

    Move the cursor to the very top of the screen, maybe push up a bit. The main menubar should then appear. All the way to the right should be a bright blue icon - click it, and the Safari window should revert to 'normal' size.
    Pressing Command-Control-F should accomplish the same thing.
    Once it is back to normal size, click and hold on the top portion of the Safari window and drag to left or right to place it where you want it to be. Once you leave it there, the next time you open Safari it should open its window in normal size at that place.
    If you need to re-size the window a bit, you can click-and-hold on the bottom-right corner of the window and drag to resize it.

  • How is it possible to make sure that LV uses the same thread for several threadsafe DLL calls?

    Hello,
    i have a thread safe DLL and most functions are called from serveral threads from the LV apllication without problems.
    In case of an error i have to call an error handler function in this DLL (like WinAPI: GetLastError()) from the same thread which has called the function that failed before.
    I can't use the user interface execution because some functions need a long execution time and i don't want to balk the user interface.
    All other executions than the user interface execution have more than one thread and in most cases the DLL function calls were executed from different threads - so the error handling doesn't work...
    Any idea?
    Thanks for your help!

    Hmmm....
    How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
    "Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
    Not sure on the above.
    Please correct me if this is wrong!
    Ben
    Message Edited by Ben on 07-19-2007 08:26 AM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • I have an error 42404 message.  I have uninstalled Itunes,quick time, etc, etc.  I then checked to make sure that all files had been deleted.  I have 2 files that haven't been deleted and are still not.  It will not allow me to delete them access denied.

    I received an error 42404 message.  I have uninstalled itunes, quick time, etc, etc.  I then went to check that all the files had been deleted, however,
    Program files\common files\Apple - will not delete - it says folder access denied
    program files (x86)\common files\Apple - will note delete - it says require permission from SYSTEM to make changes to this folder.
    How can I delete these 2 files so that I can reinstal Itunes?

    You can uninstall the relevant extensions from Tools>Addons to remove those toolbars. Also there may be some unwanted plugins which you may want to disable. This should solve your problems.
    If you still want a clean profile, uninstall firefox with the "Remove my Firefox personal data and customizations" checkbox enabled. Alternatively you may remove your firefox profile folder which (on Window7) is stored in C:\Users\<your-username>\AppData\Roaming\Mozilla\Firefox\Profiles folder with a randomly name. You may delete this folder before installing a new version to get a clean profile.

  • I may have downloaded a virus or malware by accident. How do I check to make sure? I have a iMac with OS X version 10.9.4

    I may have downloaded a virus/malware by mistake. How do I check to see?

    Did you open an attachment in the email?
    I don't understand why Rudegar is talking about this happening in iOS????
    ...software can't be added from a mail or website
    But if an attachment was opened in that email... And there are drive-bys from sites, if Java is enabled in the browser.

  • How can I embed a JPEG so that Windows users....

    How can I embed a JPEG so that Windows users will not have to open it as an attachment? I have a flyer I've converted to a JPEG, and I need to send it out to my contacts. Problem is, a lot of people are too lazy to open attachments in outlook.
    How can I make it so even (ugh) Window's users will just open the email and see the flyer?
    Thanks a lot!

    Dont think you can on ipad numbers.
    Jason

  • How can I check that all numbers in a serial number are numeric

    I wrote a vi that checks to make sure that a serial number is in the "mmddyy-xxx" format, where xxx can be from 0 to 999. The problem is if I enter something like "012210-A1" it passes. Is there an easy fix to fail anything where xxx is not in the 0 to 999 range?
    Thank you
    Solved!
    Go to Solution.
    Attachments:
    Ser_No.vi ‏32 KB

    Hi chuck,
    you can do it that way:
    When the serial number isn't correct you will get an error from the ScanFromString function...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • What is the best way to have Mac setup for sync-ing 2 calendars?  Any way to change? When we 1st got our Macbook we unknowingly set it up wrong--as 2 separate users, with separate everything. Good for contacts and email, bad for calendar, photos, music.

    What is the best way to have Mac setup for sync-ing 2 calendars?  Any way to change?  When we first got our Macbook we unknowingly set it up as 2 separate users, with separate everything.  Now I have an iphone and I want to sync calendars but not contacts or email.  Any direction you could give would help! thx

    Anyone...anyone? Bueller...Bueller?

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • HT1364 I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again.  How can I make the iTunes media folder change permanen

    I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again.  How can I make the iTunes media folder change permanent?  I have an older machine with Windows XP.

    I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
    Try this:
    Prepare iTunes so that it can see the external drive.
    Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
    Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
    Close and shut down the computer.
    The next time you turn the computer on again, connect the external drive
    Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
    Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
    If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
    Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
    What happens, which step do you have problems with?
    Message was edited by: the fiend

  • I am planning a long vacation and taking my laptop but it is my home computer that my new ipad and ipod touch are synced too. I know i can backup to the cloud over wifi but how can i do things like delete photo albums

    I am planning a long vacation and taking my laptop but it is my home computer that my new ipad and ipod touch are synced too. I know i can backup to the cloud over wifi but how can i do things like delete photo albums instead of having to manually delete pictures one by one on the Ipad. Is there any way also to add my pictures to the ipad other than through email. i am assuming that i can't just install itunes on the laptop and sync to that. I have been told that i always have to sync to my original synced home computer for that.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

Maybe you are looking for

  • IOS Widgets and Edge Animate CC 2014.1.1

    Hi ! I just noticed that when exporting my animation using iBooks .wdgt files, when I expand this widget to see its contents, I cannot find the necessary info.plist file in order to this Widget to work inside iBooks Author or elsewhere. Is that norma

  • Files in "file view" but not in Explorer

    Hello all, I reorganized my Project repository on my harddisc. I created subfolders and moved some of my files into them. I used "Move on disc..." option in files view in the project explorer. In windowws explorer all looks fine now. But in files vie

  • Quicktime Pro to Media Player?

    Does anyone know if Quicktime Pro will convert my Quicktime creations to play on Windows Media Player? I'm the only Mac user in the building and can't get these people to download Quicktime for Windows(that would be too easy of a solution). / joe iMa

  • Kindly give authorization object for mrp type in material master

    Hi friends, Kind tell me what is the authorization object for MRP type in material master. Your help is considered more important. thanks in advance willaims

  • INTERNAL ERROR IN SAP OLE DOCUMENT CONTAINER CONTROL. in transaction PBWW

    Well while running a transaction PBWW when we click on create button it opens the word document with the text in it but suddenly the text is gone and it is showing a error which is INTERNAL ERROR IN SAP OLE DOCUMENT CONTAINER CONTROL. how can it be r