The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

EA3500 - Windows was unable to connect... (Win 7 and Win 8.1 have done this off and on)...

I recently purchased a Linksys EA3500 router and am using it as the sole router in my home network. I have primarily had three devices connected to the network computers/tablets - two running Win7 and one running Win8.1.
The first few days were OK but then the Win 8.1 system would not connect to the network (see the error message below). "Windows was unable to connect..." I tried the problem troubleshooter, power cyclilng the comptuer, power cycling the router. Updating the router firmware to the latest (it added a .1 at the end). Uninstalling and reinstalling wireless drivers on the computer. I've reset the router to factory defaults. I've run the router with and without wifi passwords.
This morning I was able to connect the Win 8.1 system to the network. Not sure what changed overnight. However, today I have had two instances of a different computer, one of the Win 7 systems, suffering the same problem. Different hardware. The Win 8.1 system is an Asus T100 tablet/netbook using a Broadcom 802.11abgn Wireless SDIO Adapter. The Win 7 system is a Dell E6540 laptop using a Dell Wireless 1506 802.11b/g/n 2.4 GHz adapter manufactured by Atheros Communications, Inc.
Last night, when I was having problems with the Win 8.1 system, I should note that it worked fine with the 5 GHz network. The laptop, however, does not support 5 GHz and now that it's suffering the same problem my only work-around is a cellular hotspot.
I'm suspecting the router at this point. Has anyone else seen this? Any ideas what could be causing it, what I could do to fix it or what I might do to help diagnose the problem(s) ? I'm more than willing to run third-party software to analyze and better understand what is happening on a network level (I would actually like to understand as much as anyone is willing to get me started on).
If I am unable to determine why certain systems almost seem to become "banned" from my network while others are working just fine then I'm going to have to return this device and try something else.
Thanks,
Dave
I recen

Hi @daved31,
You are on the right track. Checking the Wireless MAC Filter is one of the troubleshooting steps. For 2.4 GHz frequency, the suggested channels are 1, 3, 6, 9 and 11. For the 5 GHz, I suggest to use the highest channel. Those channels will give you a better signal, just make sure that no other wireless device is using it to avoid wireless interference.
If only one wireless device is not connecting wirelessly, we should focus on the wireless device itself because we know that the router/access point is working since the other wireless devices are working wirelessly.
I suggest to delete preferred networks on the laptop. Here's the link that may help: http://kb.linksys.com/Linksys/GetArticle.aspx?docid=85537a14b0214be48217c733bba9ac65_Removing_Wirele...

Reload Software:552 and then "Application loader was unable to connect with your device."

Hi guys
I'm new to this forum and looking for a help please..
My curve 8900 got the "Reload Software:552" message on the screen. I was trying to uninstall an application and after it asked me to reboot, it showed me that message. I already try to reinstall the OS like most of you guys said. But when I already in the process of that, it showed me "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry"
I was trying this steps..
1. use the BlackBerry Desktop Manager
2. connect the BlackBerry to the computer using a USB cable
3. click application loader, then start
4. then i choose the OS and apps i want to install it also
5. after i click finish and the process start, i stuck on the task 2 of 5 "wait for device initialization" and then the message "Application loader was unable to connect with your device. Please re-connect yout device, enter password, if requiered, and retry" showed.
I try and try again but there is no use. it keeps show that message.
help me please, this really frustrates me
Thanks in advance guys..

1. Make certain your USB cable is connected to a main REAR USB port on the rear of the PC, not a front USB port, not a USB hub.
2. Try loading the OS with these instructions (make sure that Desktop Manager is not running):
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error enabling photo stream "iphoto was unable to connect to Photo Stream"

Whenever I try to enable Photo Stream, it times out after awhile, and I get the following error: "iPhoto was unable to connect to Photo Stream." (see below [1]). I "tcpdump" shows that the computer is trying to open connections to akamai (unrelated?) but not apple. I am using iPhoto 9.2 build 626.
There is one oddity in this scenario : I have one iCloud account that I am trying to use between three computers. I was able to register iPhoto on my mac book pro, but it is failing on my second.
thanks in advance,
-tom
08:26:35.984082 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:37.417858 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
08:26:38.032082 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:39.977873 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:42.025748 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:42.435600 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
08:26:43.971461 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:46.019515 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:47.453197 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
08:26:47.965198 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:49.606268 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 339
08:26:49.708805 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 348
08:26:49.811498 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 379
08:26:49.914098 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 405
08:26:50.016310 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 401
08:26:50.017171 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:50.118847 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 401
08:26:50.221214 IP 192.168.6.122.filenet-rmi > 239.255.255.250.ssdp: UDP, length 393
08:26:51.958833 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:52.368490 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46
08:26:54.006909 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:55.004001 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [.], seq 187854:189302, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 1448
08:26:55.004213 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [.], seq 189302:190750, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 1448
08:26:55.004264 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [P.], seq 190750:191283, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 533
08:26:55.004415 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [P.], seq 191283:191688, ack 103254, win 65535, options [nop,nop,TS val 1073825952 ecr 2280611493], length 405
08:26:55.035678 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 189302, win 4116, options [nop,nop,TS val 2280641050 ecr 1073825952], length 0
08:26:55.053470 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 190750, win 4116, options [nop,nop,TS val 2280641068 ecr 1073825952], length 0
08:26:55.060158 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 191283, win 4116, options [nop,nop,TS val 2280641074 ecr 1073825952], length 0
08:26:55.066460 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [.], ack 191688, win 4116, options [nop,nop,TS val 2280641081 ecr 1073825952], length 0
08:26:55.209380 IP a173-223-237-54.deploy.akamaitechnologies.com.https > susans-pc.52389: Flags [P.], seq 103254:103691, ack 191688, win 4116, options [nop,nop,TS val 2280641223 ecr 1073825952], length 437
08:26:55.209522 IP susans-pc.52389 > a173-223-237-54.deploy.akamaitechnologies.com.https: Flags [.], ack 103691, win 65535, options [nop,nop,TS val 1073826154 ecr 2280641223], length 0
08:26:55.952463 STP 802.1d, Config, Flags [none], bridge-id 8000.98:fc:11:54:7a:9e.8002, length 35
08:26:57.386190 ARP, Request who-has dd-wrt (Broadcast) tell 192.168.6.122, length 46

Good catch, nifmus. I'm kicking myself for not checking system.log earlier! I have very similar messages in mine.
By any chance is your Library folder (or part of it) relocated to a separate disk? Or your entire home folder? I have part of my Library folder on a SSD for speed, but my home folder and some of the larger Library subdirectories are on a regular disk because they wouldn't fit on the small SSD. It's all tied together with symbolic links, and without problems... until Photo Stream came along and didn't like it.
I knew that sandboxd was involved somehow, but your post prompted me to focus on it. It's definitely the problem here. I found the following sandbox profile file inside the iPhoto application bundle:
/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app/Conten ts/Resources/PhotoStreamAgent.sb
Inside this file are a bunch of definitions to control what PhotoStreamAgent is allowed to do. There are a bunch of lines under an allow-file-write* declaration which should allow PhotoStreamAgent to write to the above files listed in your log. Lines such as:
(home-regex #"/Library/Application Support/iLifeAssetManagement")
(home-regex #"/Library/Preferences/com\.apple\.iLifeAssetManagement\.crash\.plist(\.[^/]+)? $")
And many others. In my case, I suspect that the problem may be related to the fact that the final absolute path of those files may differ from what you'd get if you just substituted my home directory in for "home-regex" since I have stuff relocated around. Although since I was able to get it working with a blank home directory, also put in place via a symbolic link (so the final path differs), I'm not 100% sure of this.
What I do know right now is that there is a quick "hack" that fixed it for me. I don't like the hack and would strongly recommend against it, because it's likely to break the next time there's a software update for iPhoto. But it works until I can find a permanent solution.
To make it work, I edited the above file and changed the second line from "(deny default)" to "(allow default)". This, of course, defeats the whole purpose of the sandbox by allowing PhotoStreamAgent to do anything it wants, but it also allows stuff that is really supposed to be allowed but fails anyway for us.
If you want to try this, it helps to be familiar with the unix underpinnings of OS X. There's probably a way to do it in the normal graphical user interface, but as a longtime unix guy, I just jumped to the command line and did a "sudo vi (that long filename)". To do it via the gui method, you'll have to navigate to that folder in Finder (quickest way is to hit Cmd-Shift-G and copy/paste the path, or right-click iPhoto and "Show Package Contents", then drill down to the file), edit the file, save a copy (because you don't have permission to modify it), then copy the new version over the old (it will ask for an admin password).
Again, I don't recommend this because it's likely to break in the future and defeats the security that Apple intended with the sandbox, but it's a quick fix. I'll continue to investigate as I have time, trying to find out precisely what's causing the failure with the default sandbox profile.

The search request was unable to connect to the Search Service

I have upgraded from WSS 3.0 to SharePoint Foundation 2010. So far everything appears to be OK apart from my search.
When I attempt a search I get the following:
The search request was unable to connect to the Search Service.
I checked the Manage Database Update Status in Central Admin and noticed the following(an upgrade is required):
Also, I checked Manage Services on Server and noticed that the only search related service is 'SharePoint Foundation Help Search'.
If I go into Manage Service Applications and click new there is no option to add a search service.
Finally I tried PSConfig:
PS C:\Users\administrator.ACHESON> PSConfig.exe -cmd upgrade -inplace b2b -force
-cmd applicationcontent -install -cmd installfeatures
SharePoint Products Configuration Wizard version 14.0.6009.1000. Copyright (C) M
icrosoft Corporation 2010. All rights reserved.
Performing configuration task 1 of 6
Initializing SharePoint Products upgrade...
Waiting to get a lock to upgrade the farm.
Successfully initialized SharePoint Products upgrade.
Performing configuration task 2 of 6
Initiating the upgrade sequence...
Successfully initiated the upgrade sequence.
Performing configuration task 3 of 6
Registering SharePoint features...
Feature installation has determined that there are no new features that require
installation.
Successfully registered SharePoint features.
Performing configuration task 4 of 6
Installing the application content files...
Installing the SharePoint Central Administration Web Application content files..
Installing the SharePoint Web Application content files...
Successfully installed the application content files.
Performing configuration task 5 of 6
Upgrading SharePoint Products...
10.00%Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfig
urationTaskException was thrown. Additional exception information: The upgrade
command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Total number of configuration settings run: 5
Total number of successful configuration settings: 4
Total number of unsuccessful configuration settings: 1
Successfully stopped the configuration of SharePoint Products.
Configuration of SharePoint Products failed. Configuration must be performed be
fore you use SharePoint Products. For further details, see the diagnostic log l
ocated at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\1
4\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log and the application
event log.
This is the warnings and errors that the log contained:
10/09/2013 12:48:16 10 WRN Found registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ComponentsToRegister, but the SubKeyCount is zero
10/09/2013 12:48:24 10 WRN Failed to add the service connection point for this farm
10/09/2013 12:48:24 10 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=acheson-glover,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
10/09/2013 12:48:40 10 ERR The exclusive inplace upgrader timer job failed.
10/09/2013 12:48:40 10 ERR Task upgrade has failed with a PostSetupConfigurationTaskException An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
10/09/2013 12:48:40 10 ERR An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:40 10 ERR Task upgrade has failed
10/09/2013 12:48:40 1 ERR Task upgrade SharePoint Products failed, so stopping execution of the engine
10/09/2013 12:48:40 1 ERR Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed or some tasks were not run
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed to execute
10/09/2013 12:48:41 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log, fix the problem, and run this configuration wizard again.
10/09/2013 12:48:41 1 ERR Post setup configuration was not run successfully when using the command line task driver module
How do I resolve this?
Cheers
Paul

Hi,
SharePoint Foundation the search service should be installed by default. It's not the same as with 2010 Standard or Enterprise where you can create a "Service Application" for it.
Follow this article to configure SharePoint Foundation Search:
http://plexhosted.blogspot.com/2011/11/how-to-configure-sharepoint-foundation.html
Meanwhile, here is a thread which discusses the similar question:
Configuration of SharePoint Foundation 2010 Search
http://social.technet.microsoft.com/Forums/sharepoint/en-US/af57728f-ae20-477b-8c67-2b594a1a72de/configuration-of-sharepoint-foundation-2010-search?forum=sharepointadminprevious
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Whycan't connect the Essbase Administration console to the OLAP server?

I have a problem about Essbase Administration console.After I install all the product of the Essbase, (includeing the 6540ns?6540na?6540am?654032?6540rt?eas653_nt). i can't connect the Essbase Administration console to the Essabse OLAP server.The Administrator server,username and password is correct but there is "can't connect to the server"error. All the installtion process this time is the same as berfore i have done, and there was no question when connectting to the Essabse OLAP server before. I don't know how to solve this problem, and it hold back me to continue my other work. the essbase OlAp server and the Essbase Administration console are both installed on the same PC, useing window2000 professional best regards Lornawei

thanks for answer.server is running. Analyzer and spreadsheet add_in can connectted to the server correctly.I installed the EAS not as as a Windows service,and i cann't even login to the EAS console,and check the EAS log i remember there is some wrong with connect the Mysql services.yesterday i installed the EAS as as a Windows service,and have connect to the server correctly mannually.I don't know why I can't install the EAS not as as a Windows service now.

Error: "The document information panel was unable to load"

Hello,
I have created a custom document content type that uses a specified word template for a sharepoint document library for contracts and offers, and added a few custom columns in the document library as well. The word template launches succesfully when creating a new item in the document library, but the problem arises when I add custom columns to the word template content type. When the document loads in Word, I get the following error: "The Document Information Panel was unable to load. The document will continue to open. For more information, contact your system administrator." And in details:
"Document Information Panel cannot create a new, blank form.
Document Information Panel cannot open the form. To fix this problem, contact your system administrator.
Form template: http://servername/sitename/proppanel.xsn
The following DataObject either cannot be created or cannot be initialized: list_033AA217-8906-447E-A604-A300F51D4030
Document Information Panel cannot add the following object to the DataObjects collection: list_033AA217-8906-447E-A604-A300F51D4030
list_033AA217-8906-447E-A604-A300F51D4030 could not be added to the DataObjects collection.
The following item already exists in the collection: list_033AA217-8906-447E-A604-A300F51D4030"
Interestingly enough, I have two web applications running on the same server that I have tried to implement this on, and on the other it works flawlessly, meaning that the Document Information Panel launches successfully and I can edit the columns associated with that content type and store the values in a document library. I have also tried to save the DIP template from the working web application and use it as the default DIP template on the other application, but that doesn't work either.
I have also tried to browse through all options and configurations in the application settings in CA and SSP, but to no avail. Any suggestions about what might be causing this problem or how to fix it would be greatly appreciated.
- Sebastian Eriksson

Hi All,
I have the same problem with my DIP in already two of my document libraries. Please see below:
Document Information Panel cannot create a new, blank form.
Document Information Panel cannot open the form. To fix this problem, contact your system administrator.
Form template: http://servername/sitename/proppanel.xsn
The following DataObject either cannot be created or cannot be initialized: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
Document Information Panel cannot add the following object to the DataObjects collection: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
list_295E77CD-1C08-4DDC-A188-F86107F9BF60 could not be added to the DataObjects collection.
The following item already exists in the collection: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
I have made the same thing that Kirikou has suggested and I was able to recreate the broken library. The problem is that Kirikou's way has failed on my Share Point staging installation:
[COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))]
   Microsoft.SharePoint.Library.SPRequestInternalClass.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +0
   Microsoft.SharePoint.Library.SPRequest.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +125
[SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))]
   Microsoft.SharePoint.Library.SPRequest.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +166
   Microsoft.SharePoint.WebPartPages.ListViewWebPart.RenderView() +4239
   Microsoft.SharePoint.WebPartPages.ListViewWebPart.EnsureData(Int32 token) +658
   Microsoft.SharePoint.WebPartPages.SharePointDataProvider.Execute() +254
   Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateV2ConnectionsAndSharePointDataFetch() +139
   Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateConnections() +85
   System.Web.UI.WebControls.WebParts.WebPartManager.OnPageLoadComplete(Object sender, EventArgs e) +52
   System.EventHandler.Invoke(Object sender, EventArgs e) +0
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +2063076
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1875
I will be very appreciated if somebody knows what is the reason for this problem.
Best regards,
Yordan Nikolov

The Document Information Panel was unable to load.

Platform: SharePoint 2013, Office 2013.
Background: When you open an Office document from SharePoint users get this error:
The Document Information Panel was unable to load. The document will continue to load. For more information, contact your system administrator."
"The form cannot be opened. To fix this problem, contact the form designer. Form template:
http://<site address>/../proppanel.xsn. The XML Schema for the form template has an invalid value for the following attribute: location."
I tried running this fix: http://www.cb-net.co.uk/microsoft-articles/2063-sharepoint-2010-templates-and-document-information-panel-errors, but it kept saying that it couldn’t see the url that
I specified (I did check this carefully); think it might only apply to SharePoint 2010 – perhaps the shell syntax is different in 2013.
Can anyone help me out?

Hi Alex,
According to your description, my understanding is that the error occurred when opening a document from SharePoint.
Is this document information panel customized?
I recommend to re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
Best regards.
Thanks
Victoria Xia
TechNet Community Support

The Document Information Panel Was unable to load. Please Help

Hello all,
I just recently created my own custom Document Panel in InfoPath. I uploaded it into a custom content type. I applied this to a document library and it is the standard document panel for creating a new document within that document library. When I click
"New document" I get this error..
The Document Information Panel was unable to load. THe document will continue to open. For more information, contact your system administrator.
Details:
Document Information Panel cannot open a new form.
The form cannot be opened. To fix this problem, contact the form designer.
Form template: http://Mysite/_cts/DIPTestContentType/Myfirstform.xsn
The SOAP response indicates that an error occurred on the server:
Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown.
<detail><errorstring xmlns="http://schemas.microsoft.com/sharepoint/soap/">No item exists at http://Mysite/My DIP Test.docx. It may have been deleted or renamed by another user.</errorstring><errorcode xmlns="(html
for the error code..had to delete it because my body text cannot contain images or links until my account is verified but it is a link to Microsoft support)
...It appears that it is not locating the custom Document Panel.
Could anyone point me in the right direction?
Thanks

Hi Alex,
According to your description, my understanding is that the error occurred when opening a document from SharePoint.
Is this document information panel customized?
I recommend to re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Catastrophic failure -- The Document Information Panel was unable to load

I have a content type that has a document template and a custom document information panel associstaed with it. For most users, these work without issues.
Some users are reporting, however, that they receive the following series of messages when trying to create a new document from the content type:
You are currently working offline.
Here, the user can choose either Try to Connect or Stay Offline.
If the user clicks Try to Connect, the following error message is displayed:
Clicking OK results in the document loading. The DIP loads, but two fields that pull values from a SharePoint list are blank.
Again, this happens for only a handful of users, so it seems like it's an issue with either their local PC or their connection to SharePoint.
So far, I have tried the following:
Repair Office 2010 installation
Removed all locally cached versions of both the document template (.dotx) and the custom DIP (.xsn)
Verified user permissions for the SharePoint site and the SharePoint lookup list
Based on some other posts I've seen, checked to make sure that InfoPath is installed and that IPEDINTL.DLL
is present at
C:\Program Files\Microsoft Office\Office14\1033

Hi,
According to your post, my understanding is that the Document Information Panel was unable to load.
I recommend to go to the
Document Type Advanced Settings, click Edit template, go to
File, click on Inspect, click on Remove All behind
Custom XML Data.
Here is a similar blog for your reference:
Document Information Panel | Joran Markx
If your list contains lookup columns, you can refer to:
SharePoint:
Document Information Panel fails to load when office documents are opened in a library that contains lookup columns
Document Information Panel cannot open the form
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

HP Laserjet 2820 - print spooler was unable to connect

Working in Microsoft 2003 and printer is on a wireless network. In over a year - never had a problem until 5 days ago an error message appeared when I attempted printing which stated... print spooler was unable to connect to your printer. This can be caused by your printer being turned off, the cable being unplugges, or being connected to a VPN, which will block your access to your local network.
Also, when I attempted accessing the Print Settings from HP Director, it would not open and gave an error message...An unknown error occurred. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information.
Next, I thought I would delete the software and re-install. However - I no longer have the installation disk for the printer.I then tried changing the printer port to a standard port. That did not work.
Help would be greatly appreciated.
Thank you.

hi everyone
i have same problem on hp clj2820, half page printed, half page
1) i cleaned laser mirrors and verify conectors and wires of laser scanner unit ... the problem persist
2) i inspected carousel assembly, a small plastic gear on the upper left side was wrong aligned, 1 tooth scrolled up or down, i fit this tooth in correct position ... the problem persist
what is happening?, regards

"Unable to connect to iTunes Store" 90% of the time

I have a 3rd Gen iPad with wifi only that I bought about 40 days ago. Initially I had no problem downloading and updating apps but in the past few weeks I get "unable to connect to iTunes Store" over 90% of the time. I always verfity the Internet connection is good and I've tried on my home wifi, my cellphone's mobile hotspot, and several hotel wifi connections. The other day I went into settings and noticed the Security code for my Credit Card was blank so I filled it in and clicked "done". Unable to connect so I checked back and the code was still blank. I deleted and redid my CC info and messed with some other settings and iTunes finally let me update some apps. Now I'm back home and it's giving me the error message again. I'm wondering if this is a known issue or if there's a fix for it.

Usually it's because you are not connecting to the internet via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Iphoto was unable to connect to iCloud photos on my mac. What should i do?

iPhoto was unable to connect to iCloud photos on my Mac. How do I solve this?

absolutely no idea sicne you provide no information
Best guess is to upgrade to iPhoto '11
Maybe if you provided some information including versions of iPhhoto and of the OS, details of exactly what you are doing, details of whathappens that keeps you from connection
LN

Help!! - "The HP Scan Application was unable to save the file to the specified location."

New OJ6830, latest HP software installed on Win7 64 bit.
HP Scan scans and displays the scanned pages. But, when I try to save the file as a pdf or tiff, I get the following error message:
"The HP Scan Application was unable to save the file to the specified location."
BTW, I have tried running the app as Administrator and have disabled my antivirus software.
Why won't the HP scan app save the file? Has anyone else seen this error message?
Is there anything else I can do, or this this just a major bug in HP scan software?

Mike,
One Idea:
Make sure you have "San Preview" checked else the software will not accept "specified location".
Reference:
Save Scan to Specified Location
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Aperture was unable to connect to Photo Stream

Aperture was unable to connect to Photo Stream. Help!

That didn't work for me. However I found an alternate fix. You just need to move ~/Library/Application Support/iLifeAssetManagement to the trash and then reboot, and it should work.

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

Similar Messages

Maybe you are looking for