Theme 13, One Level Tabs and IE 7 Blues

Hi all,
I'm using Theme 13 with many "one-level tabs" pages. Using IE6, everything works just fine.
Using IE7, if I hover over a control on a one-level tabs page (tabs, fields, checkboxes, the DHTML images that go with DHTML image list with sublist, etc.), the controls make a copy of themselves about a quarter-inch below their original spots.
Clicking a blank area on the page or refreshing the page temporarily clears up the situation on that page. But go to another tabbed page and the problem reappears. Come back to the original page and it reappears again. Essentially I have to click a blank area of every tabbed page to make the page work right.
Has anyone else seen this behavior? Any solutions?
Thanks!!
John

I have an update on this situation. Running it on IE v7.0.5730.11 on XP also works fine. The two machines I tried it on that are having the problem are both IE7 on Vista (I don't have the exact IE7 version but I'll get it). Also appears to work fine on Firefox (on XP...haven't tried FF on Vista - I'll have to get permission from the machine owners).
Hope this information is helpful in diagnosing what may be wrong.

Similar Messages

  • Change one level tabs to two level

    Is there an easy way to change one level of tabs to two levels without re-building an application ?
    Can someone show me how to do this please ?

    My recommendation is to do the following:
    1. Navigate to Home>Application Builder>Application ###>Shared Components>Tabs
    2. "Add" a new parent level tab; or two
    3. Edit each standard tab and place it in the parent tab you wish it to appear; you do this by populating the "Parent Tab Set" attribute of the standard tab.
    4. Change your application or a given page to be some sort of TWO LEVEL TAB page template.
    Your done; you should have your application migrated from one level tabs to two level tabs. If you defined page templates at the page level you will need to adjust them accordingly.
    Mike

  • Unable to switch from one level tabs to two level tabs.

    I created my application using one level tabs. When I created parent tabs they didn't show up. I have changed the Page property to Two Level Tabs in the Default Templates by Component section of the Define Theme page. But the 2 level tabs just not show. After some trials even the 1 level tabs dissapeared. I can't see any tab now.
    Is there any method to switch safely from one level tabs to two level tabs and have them show properly?
    Francisco

    I developed my own solution after several days of
    working on the issue, and it is kind of complex. I
    have a 12 page word document with images explaining
    the process, so I cannot post it here. I responded to a thread on this forum several weeks back about this topic. I guarantee that the posts in total in that thread could never fill a 12 page document. It's not that complicated.
    You can find it here:
    Re: Can someone explain the diference between the tabs and the tab sets?
    The main problem when switching from one-level tabs to two-level tabs is the "psuedo-parent-tab" that gets created as a container reference for the standard tabs. Once you get past that - and change the default template for your application you're well on your way.
    Earl

  • One Level Tabs Region Width

    Hi All,
    When displaying an interacttive report report using the Reports Region 100% Width template on the One Level Tabs template I am unable to adjust the width of Region Position Two. I've tried the style="width=100%" and width=600px, etc. without any effect. Even tried moving REGION POSITION 02 up in a separate <TR> with no effect. Never had this problem with any template before. Does the fact that I'm using an interactive report impact this? Was also wondering what the designer had in mind with the Page Template Body regions?
    Keep Smiling,
    Bob R

    Deleted the report and the region, added it back and presto, everything worked as designed. Big dummy should have tried that earlier! Interesting exercise in frustration.
    Keep Smiling,
    Bob R

  • 2 level tabs and indentation

    Hi all
    Here is the application
    http://htmldb.oracle.com/pls/otn/f?p=19672:1:4096297706318740::NO:::
    I am using 2 level tabs and on the left side of Tab1...I want some indentation
    You can see in the example.. Page1 has one child PageX and Page2 has one child PageY. On left side, For PageX indentation ... I put ' ' in the Tab label of PageX but I dont want to see the extended line in the display as you can see.
    For PageY I put 'li' in the tab label of pageY. Circle is good but I want some indentation too.
    Could any one suggest some thing else.
    Thanks
    pb

    Chris,
    I too have been challenged on this. My habit is to create the page first, test and then once satisfied with the results, associate the page with a tab. Hope this helps.
    Jeff

  • Changing width of a Sidebar in One Level Tabs with Sidebar.

    I am using a One Level Tabs with Sidebar.
    How can we change the width of the sidebar??
    Thanks,
    Deepak

    Sam,
    In the sidebar region of One Level Tabs with Sidebar., I am using LIST, so when I clicked the " show edit links" of LIST region, it's using template as Navigation Region. Then I did the following modification.
    Original Code
    <table class="t16NavigationRegion" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES# border="0" cellpadding="0" cellspacing="0" summary="" width="210" style="table-layout:fixed;">
    <col width="25" /><col width="85" />
    Modified Code
    increases the table width from 210 - 310 - nothings happens
    <table class="t16NavigationRegion" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES# border="0" cellpadding="0" cellspacing="0" summary="" width="310" style="table-layout:fixed;">
    <col width="25" /><col width="85" />
    increases the col width from 85 to 185 (table width remains same as 210) - sidebar region width increases (FINE)
    <table class="t16NavigationRegion" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES# border="0" cellpadding="0" cellspacing="0" summary="" width="210" style="table-layout:fixed;">
    <col width="25" /><col width="185" />
    decreases the width of table from 210 - 110 - nothings happens
    <table class="t16NavigationRegion" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES# border="0" cellpadding="0" cellspacing="0" summary="" width="110" style="table-layout:fixed;">
    <col width="25" /><col width="85" />
    decreases the col width from 85 to 45 - nothings happens
    <table class="t16NavigationRegion" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES# border="0" cellpadding="0" cellspacing="0" summary="" width="210" style="table-layout:fixed;">
    <col width="25" /><col width="45" />Also, what are thses two columns width for
    <col width="25" /><col width="85" />Thanks,
    Deepak

  • Hello, i have a question. I've got one .mov  video and one .mp4, both 3 minutes long. Now I want to burn them on one single dvd, and a menu (if possible) so i can choose between them. Is this possible?

    Hello, I have a question.
    I've got one .mov  video and one .mp4, both 3 minutes long. Now I want to burn both of them on one single dvd, with a menu (if possible) so i can choose between them.
    How can I do this?

    You could use iMovie if you own it. Look here for an example...

  • Logic Pro X cut my track into multiple takes while recording. How do I merge them into one, steady track and how do I prevent this from happening again?

    I'm going to throw my computer.

    Samrobmaynard wrote:
    I'm going to throw my computer.
    Then you should probably take up a different hobby... if that's all it takes....
    Seriously..... Try reading the User Guide....
    http://help.apple.com/logicpro/mac/10/
    Almost the info you need is there... and it took me all of a few seconds to find the answers by using the search feature...
    1) Flatten or Merge Takes to create one take.
    http://help.apple.com/logicpro/mac/10/#lgcpb1998a98
    2) Change the recording settings......
    http://help.apple.com/logicpro/mac/10/#lgcpbc10f1ea
    (See the section on MIDI: Overlapping Recordings pop-up menu:)

  • How to switch from two-levels tabs to one.

    HTML DB v2.0.
    I noticed that having two levels tabs I am getting error (can not fetch the record) because the "Clear Cache" option is available only for Parent Level tab.
    My page is designed like this: Person's info, report on children records, and a form to enter/edit children records.
    I'd like to switch to one-level Tabs and "Clear Cache" every time you go from one tab to another so form will be in a mode to enter a new record.
    I tired to change the theme to one-level tabs, but nothing really changed when I went to create Tabs - it's asking for a Parent tab.
    Message was edited by:
    zavadskaya

    Hi zavadskaya
    Try:
    - keeping the two level tabs.
    - add a process to the Page Rendering area of your page
    - the process is set up as:
    - Type = Clear Cache for all Items on Pages ..... enter your page number.
    - Process Point = On Load - Before Header
    I hope this helps.
    Cheers,
    Patrick Cimolini

  • Switch between one level and two level tabs

    Hi,
    In my application I'm having many pages manages with tabs.
    Some tabs should have sub tabs other will have none.
    For example Page 1:
    ______________________________________| HOME* | MASTER DATA | TEST |_____
    Page 2
    ______________________________________| HOME | MASTER DATA* | TEST |_____
    | M1* | M2 | M3 |
    Page 3
    ______________________________________| HOME | MASTER DATA* | TEST |_____
    | M1 | M2* | M3 |
    Page 4
    ______________________________________| HOME | MASTER DATA | TEST* |_____
    | T1* | T2 |
    Like you can see Page 1 hast no sub tabs and only the parent tab should be shown (normally this would be One Level Tab Template and for the others it's Two Level Tab Template).But I didn't get it working. I've tried to following:
    Setting page 1 to one level and creating a parent tab set with all required labels will display OK. Creating page 2 with new parent tab set and tabs and two level template.
    Will not show not page 1 parent tab when accessing directly. Access from page 1 will throw error message: "could not find item (123455) on page."
    I don't like to have something like this for page 1, because there twice shown Home, for one page ...
    _________________________| HOME |_______
    | HOME |
    How can this be done in ApEx are there any tricks?
    Thanks
    chrissy

    Chrissy,
    Create a page template as a copy of your two level tabs template and simply remove
    #TAB_CELLS#
    Assign this page template to your page 1.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • EA 4.2 Two Level TabsLeft and Right Sidebar not highlighting the parent tab

    Theme 24 Two Level Tabs - Left and Right Sidebar page template is not highlighting the parent tab. I did some changes to the Current Parent tab section and it is working so can we see the changes in the EA2 or the final 4.2 product.
    Orginal
    <li><a class="active" href="#TAB_LINK#">#TAB_LABEL#</a>#TAB_INLINE_EDIT#</li>
    changed to
    <li class="active">#TAB_LABEL##TAB_INLINE_EDIT#</li>

    Log 4.2EA issues and comments using the Feedback link in the App Builder on apexea.oracle.com.

  • Problem Switching/Changing a page in one parent tab to another

    I have 2 level tabs in my application. Lets call the 'top' set of tabs, Parent1 and Parent2.
    Parent2 has only one tab 'below' or contained in it. While in Parent1, there are many tabs below it, each refers to a specific page that has some apex reports. I'm just trying to move one of those "sub" tabs and the corresponding report from Parent1 to Parent2.
    To do that, in Application Builder, i click on the page that i want to essentially switch form Parent1 to Parent2. I can see under the Tab section, what its called on the right side, under Tabs. Lets call that Tab_X. So, i click on that Tab_X, and it allows me to edit the Tab itself. Now I open up the drop down box called "Standard Tab Set", and there, i can see my Parent1, and Parent2 sets. It is already selected to Parent1. So i change it to Parent2. Save/Apply.
    Then i go run my application, and I do not see that Tab_X tab in Parent1 anymore (which is good-i wanted to move it). I click on the Parent2 top level tab, and there I can see the Tab_X in the sub-tab list, which is also good. So far.
    When i click on Tab_X to run my report, it runs and outputs fine. But i lose my Parent tabs in the Parent tab bar. My subtabs look like the ones it was grouped with in Parent1, even though i can't see Parent1 or Parent2.
    It seems like it sort of half made my change but not fully, and my navigation is now essentially not working properly.
    Am I missing a step to do this change correctly?
    Thanks.
    Edited by: user12602240 on Apr 1, 2013 3:04 PM

    btw, i am using the Sand theme. Not sure if that matters.

  • 2 level tabs in APEX 4.1

    Hello,
    I created a one level tab application in APEX 4.1 and I realized that there will be too many tabs so I want to make 2 levels of tabs. One level would more general like : Info, Operations, Reports, etc, and the second level with actual pages. Is there a way to convert my one level tabs application to 2 level tabs applications.
    Thanks.

    Sure - it would be a two step process
    1 - Modify your theme usage
    - Shared components - themes - edit theme
    - Change the default page template to use on of the two-level-tabs templates
    - Ensure your desired pages either use the application default template or the relevant to level tab template
    2 - Modify your tabs
    - Shared components - tabs - manage tabs
    - Add your different levels of tabs and ensure page assignments are relevant
    - You may need to edit the properties of some pages to ensure they're using the right tabset.
    I've found two level tabs to be a little ... frustrating to set up - not quite as intuitive to use and setup. But in essence, not difficult to convert from one level to two.
    Scott

  • Tabs and Pages::: All tabs are displayed at once

    Hi, In my application I have around 100+ pages and grouped together based on specific category. I have a one level tab page as default, and I have grouped the tabs based on the category.
    I displayed the tabs when contained in a comma separated page numbers. Then I wanted put these pages in a table and display the tabs when a specific page is selected.
    Ex:
    pages :1,2,3,4,5 :
    Group 1
    for display: I used pl/sql return boolean with the following function==== return pagetabs(v('APP_PAGE_ID'))
    create or replace function pagetabs (vpageid in number) return boolean is
    begin
    for crec in select a.pagenum from auditor_pages a, auditor_pages b where b.pagenum=vpageid and a.pagegroup=b.pagegroup
    loop
    if crec.pagenum = vpageid then
    return TRUE;
    end if;
    end loop;
    return False;
    end pagetabs;
    The problem:
    I have all the tabs displayed all the time. My idea is to get the tabs related to that page depending on the category. Can some one suggest a better method or tell me what is the mistake in this process

    If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
    Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    In Firefox Safe mode these changes are effective:
    *all extensions are disabled (about:addons)
    *default theme is used (no persona)
    *userChrome.css and userContent.css are ignored (chrome folder in profile folder)
    *default toolbar layout is used
    *JavaScript JIT compilers are disabled
    *hardware acceleration is disabled (Options > Advanced > General)
    *plugins are not affected
    *preferences are not affected

  • Parent Tab and Standard Tab set

    What is the difference between above three - i.e. Parent Tab, Standard Tab set?
    I understand Parent Tab is the master level Tab, but not sure what is different between Standard Tab Set and Parent Tab? It seems like interchanging of terminology to me.
    Thanks
    Rich

    Thanks Jari, In the link given, there is a point which I have pasted below.
    6. Go to page “Display Attributes“, Select page template to “Two Level Tabs” and Standard Tab Set, in our example it is “TS1(page 1)”How do i go to this "Display Attributes" page?
    Thanks,
    R

Maybe you are looking for