There are electric charges coming out from the laptop when I touch it. It is just happened when the mac is connected to the power supply.

There are electric charges coming out from the laptop when I touch it. It is just happened when the mac is connected to the power supply.

http://reviews.cnet.com/8301-13727_7-57388858-263/ouch-my-mac-shocked-me/?tag=mn col;txt
Best.

Similar Messages

  • IMAC freezing, hang during startup, loud noise coming out from the speaker

    I am using the iMAC i3 Intel based which i bought it just a month ago
    Last week it hang, freeze just like that without me launch any application just yet
    I hold the ON button for a restart, and it freeze during the startup
    One more thing, sometimes when it freeze, there's a noise coming out from the speaker ( just like there is no signal from the TV )
    Already sent it to the Apple Service Center but they tell me it is free from any error, but by the time i bring it back home, not even 12 hours, it freeze again just like that with loud noises coming out from the speaker.
    Btw did i mention, sometimes there's also a screen distortion
    Please somebody help me

    I've experienced similar symptoms to the original poster's description. I have an iMac 27" 2010 model. This may be related to the following:
    I've looked on numerous forums regarding the freezing problem I was having. This problem would arise on a wide range of systems.
    Symptoms included but were not all always present - usually when I am loading the system with games/heavy load processes:
    - Full system freeze, screen still on.
    - Loud cracking noise coming from speakers (relative to what volume was at when the freeze happened).
    - Computer asleep but I cannot wake up unless hard reset with power button.
    - My screen backlight was also damaged (permanently dimmed) near the left side, and progressively got worse over time. This was fixed (replaced LCD 27" display $600+ and covered by my creditcard extended warranty)
    Basically, what I've come to realize which has not been well documented as far as I could find relating to this problem - is that the system is overheating and causing these freezing errors (and LCD damage in my case). Prologned occurances could result in different system part failures.
    How do you fix the overheating problem? Give this a try, it's worked so far for me and I've actually been able to continue video/photo editing without having this annoying freeze.
    Search for and download 'iStat Pro' (widget addon that lets you monitor your system temperatures... compare it before and after the fix)
    Search for and download 'SMCFanControl (a great little app that allows you to change your system fan speeds) - I did not know this was possible, and have never heard the fans go this high when it was being run automatically by the system. The fan's are obviously louder when set to max, but is well worth the system cooling results.

  • No sounds is coming out from speakers or headset help being having this problem for a week.....

    cant hear any sound coming out from my laptop speakers or headset i got a pavilion g4-1117dx notebook
    help pl
    thank you

    Hi poeticTruth,
    Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having a sound issue with your Pavilion. If you are having the problem from both your speakers and your headset it could just be a driver problem. To assist you I will need to know what operating system you are using.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • There are some noises coming from my MacAir2012 13inch's fan. What should i do to fix the problem?

    There are some noises coming from my MacAir2012 13inch's fan. What should i do to fix the problem?

    Why would you need to do anything at all?  The machine is under warranty, if there's something broken, that's what the warranty is for.

  • Ideapad S400u - Noise coming out from the headphone jack

    I also have this annoying noise coming out from my headphone.
    It happens while the notebook is charging/plugged.
    Could anyone help me?
    My lenovo is Ideapad S400u - Windowns 8.1 - 64 bits.
    Thank you,

    Igor,
    Welcome to the forum!
    Can you describe this noise?  Is it coming from the area around the headphone port?  If you plug headphones into the port, does the noise go away or change?   Is the outlet you are using for charging grounded?
    Thanks
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Can you have sound coming out from both internal speaker and speakers connected to the iMac?

    I have a pair of KRK Rokit 5 speakers connected to the headphones jack at the back of the iMac.
    I use these for playing good quality sound when I need to record on Garageband.
    However they are mains powered and have a switch at the back which is difficult to always turn due to the position of the speakers. At the same time I don't want to have the speakers turned on all the time.
    Is there a way to enable the Mac to play sound through its onboard speaker without disconnecting the speakers' cable?
    Thsi should be possible, becasue whenever I restart the Mac I can hear it s start up jingle clearly coming out from its onboard speaker, even when the external speakers are plugged in.
    Thanks

    Unfortunately the iMac is not designed to offer that setup capability.  If you go into your Applications folder>System Preferences>"Sound">here you will find that you can select the device that the iMac's sound output is sent thru (see below)>you will find that you can only select "one" device at a time to receive the audio signal, not multiple devices at once.  The "startup chimes" are separate from the normal audio output and Always come from the internal speakers.

  • I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

    I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
    I have iPhoto version 9.1.5 (615)
    Mac OS X version 10.6.8
    I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
    if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
    if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
    if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
    Any help would be greatly appreciated

    Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
    The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
    For the annoying start-up message:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

  • The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had

    The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had

    maggielou wrote:
    I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed.  However, a few of the recent pictures have shown up on my phone.
    IHow could I get these from my MacBook to my phone?
    Thanks again.
    When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups.  You can't view the backups.
    Look at the two links I provided.
    You still didn't answer any of my two questions I asked.

  • In the two days since updating to iOS8 my iPad has restart itself randomly 5 times. I was wondering if anyone else had this problem and if there is an update coming out to fix it.

    In the two days since updating to iOS8 my iPad has restart itself randomly 5 times. I was wondering if anyone else had this problem and if there is an update coming out to fix it.

    Hi DSfromMO2,
    I have this happening to me too... it is frustrating enough for me to pitch my computer out the 4th floor office window.  I found somewhere on these forums a solution which worked for me, but only for a short time.  I'm back to having this stupid glitch.  Anyway, the "temporary" solution seems to be to boot into Safe Mode by holding the Shift button down when you hear the startup chime, then let go when you see the Apple logo on the screen.  You'll see you've done it right because it'll say Safe Mode somewhere on screen (upper right hand corner?).  Restart again normally and your Mail should be free from these weird demons, but they'll be back.

  • When adding a printer share within Print Management receive "There are no more endpoints available from the endpoint mapper."

    I've installed Server 2012 as a print server (Print server will be the only function of this server). I'm now trying to add printers. The first one I've added is a HP 2035 with the Windows update HP Universal PCL6 driver. If I chose to share the printer
    during the setup I receive "There are no more endpoints available from the endpoint mapper." If I choose not to share during the setup, it adds without any issues...until I launch Properties and attempt to share it. I'm finding it doesn't seem to
    matter what driver I use, whenever I share I end up with the same result. I've also tried using the PCL6 Universal Driver from HP, no change. I'e been researching this issue for hours without any change. By default, we disable firewalls on servers (Some TN
    thread suggested checking to ensure the firewall is disabled). Spooler isn't crashing. I've tried adding a few others printers, running into the exact same issue. Why is trying to share the printers causing this issue?

    I've seen some people state they get this error when disabling the Windows Firewall service.  I've never seen the error with the service disabled but it may be the replacement software interfering.
    If it's off start up the service and let us know the outcome.
    Alan Morris formerly with Windows Printing Team

  • [svn] 3519: Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service .

    Revision: 3519
    Author: [email protected]
    Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
    Log Message:
    Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
    Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
    Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    Added Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xml

    Hi,
    Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
    What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
    What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
    some port while in reality there isn't.
    I'll eventually contact Microsoft Support, thanks for the suggestion.
    ▼
    ▲

  • Laptop is not coming out from hibernating

    regardings,my laptop is not coming out from hibernation. it is showing that is is going to hibernate but stuck there.it is showing that it is working. i wait for an hour but result is tha same. then i tried to restart but same result. can u help me in this metter 

    It's hard to say what the problem is. One recomendation would be to drop usage of the database connectivity toolkit as it adds a lot of complexity and limits your options for troubleshooting problems. There is an alternative here. Read the discussion and download the drivers...
    Also, what kind of database are you connecting to?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • When i try to open my itues it says "iTunes could not connect to the iTunes store. The Network connection timed out. Make sure your network settings are correct and your network connection is active, and try again"

    when i try to open my itues it says "iTunes could not connect to the iTunes store. The Network connection timed out. Make sure your network settings are correct and your network connection is active, and try again"

    I am having similar issues except that the store starts to load, then stops, then I only get iTunes Store in gray letters on a white screen. I can access playlist and the other stuff. Like flamesgirl, I contacted them and they just keep sending me links of stuff to try which I had already seen on the Apple website and nothing works. I posted the question on another forum I belong to and one responder said her husband was in an Apple store and asked about this problem as he was having the same issue. They said an update would be coming out soon as they were aware of the problem. Who knows.

  • I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it.  What could this come from?  Is there a simple solutions to this problem?

    I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it.  What could this come from?  Is there a simple solutions to this problem?

    Which model iMac do you have?  http://support.apple.com/kb/HT1758 How to identify iMac models 
    Which OS is currently installed? 
    Check out KB Articles:  http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) and http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM 
    If not of the above works and you have AC, call them.  Let them deal w/it.  Otherwise, take your iMac down to your local AS or an AASP.  Diagnostic testing is FREE! 
    You can also research for a solution on YouTube's "How To" website and iFixit. 

  • HT3702 my account has been hacked.. what should I do.. there are several charges that are not mine!!

    my account has been hacked.. what should i do.. there are several charges that i did not do..

    If you haven't already done so then change your account's password e.g. via the Store > View Account menu option on your computer's iTunes or http://appleid.apple.com
    You can also contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for