There is a problem communicating with the printer.

I have a Lexmark Interpret S405. I am using a MBP laptop with WiFi, running 10.5.8. I have a cabled (non-wifi) Linsys router. I am using an Airport Express.
I was finally able to get the WiFi light on the Lexmark to be static green after reinstalling the Lexmark WiFi setup and reconfiguring my Airport settings so that both the computer and printer see each other.
In fact, I even updated the driver from Lexmark's Web site last night and I watched the WiFi light on the printer blink green indicating that the installation of the driver update was being communicated to the printer.
However, when I print, it opens the print window and says first "Looking for S300-S400", then it says "Printer is now online". Then after about 10 seconds, I get this error: "There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
I've exhausted Lexmark's technical databases and couldn't find the answer here.
I've read that one possible solution was to delete all the printers from the "Print & Fax" system preferences window and re-add. That didn't work.
Lexmark says for: The printer communicating on a network; however, the printer is not responsive. Possible causes could be:
1. Your printer is associated with a network, router, or access point, but it is not your network.
2. A software process is blocked by a system security firewall preventing network communication.
3. You are logged into Virtual Private Network (VPN).
4. You are connected to a network but have decided to switch to a USB connection.
I don't have a VPN and have removed the USB cable, then restarted both printer and computer, and deleted printers in Sys Prefs, restarted, and still no solution.
I can print directly via USB cable, but want to print wirelessly.
Lexmark also says to enter my PIN (which I have pulled out from the print menu screen on the printer) in the System. That tells me a lot...
Network settings on the print window on the printer also tell me Signal strength is 5 (excellent) and that I am on the network my airport is on.
Message was edited by: Macman17

I bet this is too late but...
Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

Similar Messages

  • "There was a problem communicating with the Apple Online Store. Please try again."

    When I try to order prints on my Macbook I get the error .... "There was a problem communicating with the Apple Online Store. Please try again."  I've gotten this error for a few days.  When I try the same thing with my wife's Macbook Pro there are no issues.  How do I fix the problem on m Macbook?

    I found the problem thanks to some help given.
    Go to iPhoto menu -> Preferences... -> Advanced -> > Print Products Store  was set to "none". I changed that to my own country and then it worked, I could place the order.
    Thanks a lot!

  • Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

    Help!  I was cruzing along just fine and went out tonight only to receive the message above:
    Cannot open Page
    Safari cannot open the page
    The error was: "There was a problem communicating with the web proxy server (HTTP)."
    I have had all the Apple iPhone phone.  Have never encountered anything like this. 
    All systems are GO as soon as I log on to wifi. 
    Can anyone help, please. 

    I am also fixed.  I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
    I went to:
    Settings
    Wifi
    I selected the network I was working on by hitting the blue arrow located on right side
    At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
    I was on Off and changed it to Auto and it worked! 
    I was soo jazzed!!
    Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
    YIPPIE!!  I'm a new man!!
    Go to settings -----> WI-FI  -----> select the network you're using  ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.  
    --------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO.   Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

  • Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

    Hello
    I have Lync 2013 and 2010  , still i didn't finish my migration completely from 2010 to 2013 .this  is  coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
    There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013  front end and backend server's .
    later on after restarting both the front end and the back end server's i start having hundred's of  these error's related to "LS Call Park Service".
    so any advice for these issue ? and what is the effect for these error .
    below is the error I got .
    The database being used by Group Pickup is not the appropriate version.
    The database is not the correct version:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
    Actual...   SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
    Cause: The database has not been upgraded.
    Resolution:
    Upgrade the database to CU1.
    ==============================================================
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    =============================================================================
    Kind Regards
    MK

    Hello
    thanks Holger for u r replay .
    due to the Microsoft article about the cu :
    I run only :
    Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
    Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
    Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
    Install-CsDatabase -CentralManagementDatabase command to apply the changes.
    here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
    PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
    VERBOSE: Install databases required by Lync Server role(s).
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is DbState_RequiresMinorUpgrade.
    Database rtcxds set to mode Restricted.
    Dropping all procedures, functions and views from database rtcxds.
    Executing RtcDb.sql...
    Adding master role...
    Setting owner for database rtcxds to sa.
    Creating login MyDomain\RTCHSUniversalServices.
    Creating user MyDomain\RTCHSUniversalServices.
    Creating Schema MyDomain\RTCHSUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
    Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
    Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
    Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
    Setting the database rtcxds to multi user mode.
    Database rtcxds is set to multi user mode.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcshared.
    Database created by script "RtcSharedDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
    VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    Checking state for database rtcab.
    State of database rtcab is DbState_RequiresMinorUpgrade.
    Database rtcab set to mode Restricted.
    Dropping all procedures, functions and views from database rtcab.
    Executing RtcAbTypes.sql...
    WARNING: Warning: Failed to execute batch --
    -- Copyright (c) Microsoft Corporation. All rights reserved.
    exec sp_addrole N'ServerRole'.
    Executing RtcAbDb.sql...
    Setting owner for database rtcab to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
    Setting the database rtcab to multi user mode.
    Database rtcab is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
    VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    Database created by script "RgsConfigDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    Database created by script "RgsDynDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    Checking state for database cpsdyn.
    State of database cpsdyn is DbState_RequiresMinorUpgrade.
    Database cpsdyn set to mode Restricted.
    Dropping all procedures, functions and views from database cpsdyn.
    Executing CpsDyn.sql...
    Setting owner for database cpsdyn to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
    Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
    Setting the database cpsdyn to multi user mode.
    Database cpsdyn is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
    VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    Database created by script "ArchivingDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
    VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    State of database LcsCDR is DbState_RequiresMinorUpgrade.
    WARNING: The database LcsCDR being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
    WARNING: The database LcsCDR being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
    Database LcsCDR set to mode Restricted.
    Dropping all procedures, functions and views from database LcsCDR.
    Executing CdrDb.sql...
    Setting owner for database LcsCDR to sa.
    Creating login MyDomain\CSAdministrator.
    Creating user MyDomain\CSAdministrator.
    Creating Schema MyDomain\CSAdministrator.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
    Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
    Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
    Setting the database LcsCDR to multi user mode.
    Database LcsCDR is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing CdrJobs.sql...
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    State of database QoEMetrics is DbState_RequiresMinorUpgrade.
    WARNING: The database QoEMetrics being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
    WARNING: The database QoEMetrics being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
    Database QoEMetrics set to mode Restricted.
    Dropping all procedures, functions and views from database QoEMetrics.
    Executing QoEDb.sql...
    Setting owner for database QoEMetrics to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
    Setting the database QoEMetrics to multi user mode.
    Database QoEMetrics is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing QoEJobs.sql...
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
    VERBOSE: No changes were made to the Central Management Store.
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
    WARNING: Detailed results can be found at
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    PS C:\Users\MK>
    I hope some one can confirm no issue with what I did ??
    Kind Regards
    MK

  • Error : There was a problem communicating with the Group Pickup backend database.

    Hi , 
    I found this error in Event viewer for Every 2 min on lync server 2013 :
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=(local)\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    what can i  do ?

    Hi,
    Did you solve the issue with the help of the suggest Anthony provided above?
    If the issue persists, please check if you update the latest vesion of Lync Server 2013. If not, please update it, make sure after install the update for all FE Servers,
    then make sure to update BE Server as well. Then rerun Step 2 Setup or remove Lync Server Components.
    Here is a similar case may help you:
    https://social.technet.microsoft.com/Forums/lync/en-US/3b616e51-93ad-430a-aa93-57c2fd19e0f6/call-pickup-db-issue-after-cu1-update-to-lync-2013-enterprise?forum=lyncdeploy
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • There was a problem communicating with the screenshot service, please try again later.

    I've used browser lab for months without issues until late last month it keeps showing me this error:
    There was a problem communicating with the screenshot service, please try again later.
    I have to retry 3-5 times before I can get it to load the page.
    I'm accessing browser lab through firefox 13.0.1 Mac OS X 10.7.4

    Hi,
    We've had some problems with some of the backend systems we use and have had some accounts get into bad states. Can you please try it again until you see the problem, then respond with:
    The AdobeID you use to login to BrowserLab with (don't post your password).
    The date, time, and timezone of when you saw this error message.
    Thanks, that will let us dig into the logs, see what they tell us and look into your issue further.
    Mark

  • Error message "there was a problem communicating with the server"

    for about a week or so now, when I connect to my bank website everything is verrrry slow and when I finally get through the log in steps the error message shows on the site. Sometimes I can complete the task at hand, although it takes forever. Other times the screen just stays with the spinning wheel and I end up closing the browser. I've cleared the history and cache. I've made sure to have only one firewall/ virus protection activeated. I've reset Firefox. The pages populate faster now, but still slower than before. Not sure what's going on.

    You might try to disable some or all of your extensions/add-ons or plugins such as content blockers etc., restart FF, then selectively re-activate one by one.
    This has helped me a few times finding out what makes FF slow.

  • My apple tv never allows me to rent anything - error I get is : There's a problem communicating with the iTunes store. Try again later.

    I am in Bahrain and Apple tv never works with the iTunes store. Why?

    In the iTunes application on your computer (not the apple.com account page), update your payment information, including the credit card security code.  Once done, the red warning stating the payment info must be verified will disappear and you'll be able to rent on the Apple TV.

  • I just recieved my Iphone yesterday, and today I was reading somthing off of Safari and recieved "error:there was a problem communicating with the secure web proxy server (HTTPS)" .Now I get this whenever I try opening any of my apps. Even my facebook app

    I have never done this before so I do not know if I am even doing this correctly. Anyways, I cleared my history and cookies! I even deleted many apps thinking it might of been from them. I have even turned my phone off for a good thirty minutes. THe last thing I did was set my network settings to default.
    I dont know what to do. Since I changed my network settings to default I turned my phone off again. I might just restore all setting to default and go from there..and if this doesnt work, I will just return the iphone for a different one I guess.
    this is from my IPHONE4s

    Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
    Contact information Dennis [email protected]
    Previous contact information with your organization (DURIM):
    Dennis - i just finished my audition trial and bought the subscription the 2014 version.
    created by durin in Audition CS5.5, CS6 & CC - View the full discussion 
    DURIM - Okay.  I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
    If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]?  We'll take a look in that logfile and see if it gives us more information about why this is failing now.
    Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro?  If so, do they launch as expected or fail as well?
    I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
    Audition Log- file
    Ticks = 16       C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
    Sent from Windows Mail

  • Captivate 8 Tin Can - problem communicating with the learning record store

    When publishing a course to Tin Can format, what should I enter in the 'Identifier' field?
    If I publish with the default 'Course_ID1' text, I get an error when launching the course on our LMS. Errors says "There was a problem communicating with the learning record store."

    Hello,
    Welcome to Adobe Forums.
    Please share your contact information via [email protected]
    Thanks,
    Vikram Gaur
    Adobe Support

  • Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

    Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

    I am publishing directly to an FTP server (option 1).  Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
    I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums.  I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
    Maybe it is a publishing issue, or it could be a photo/file issue.  However, these albums aren't very large -- the largest containing 135 photos --
    Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
    I'm pulling my hair out here trying to diagnose the problem...

  • Publish error There was an error communicating with the FTP server. Try again later, or check with your service provider.

    OK! So I got everything filled out right to publish my iWeb site with iCloud now but after it looks like everything is fine this error pops up REPEATLY!:
    PUBLISH ERROR There was an error communicating with the FTP server. Try again later, or check with your service provider.
    Is this an Apple problem or with my server Netfirms???

    Yeah no sorry not the answer.  I have my own online hosting unlimited space and bandwidth.
    It seems to be linked to teh podcast image.  It's very strange...

  • There was a problem connecting to the printer. Make sure it's connected and try again

    A test page prints ok. However when I come to print any document I get this message:
    "There was a problem connecting to the printer. Make sure it's connected and try again"
    I have uninstalled the printer and re-installed it and rebooted my computer. Still printing a tet page but won't print anything else.

    Hi @davifels,
    Welcome to the HP Forums!
    I see that you are getting the error message, "there was a problem connecting to the printer. Make sure it's connected and try again." With your HP Envy 4500 printer running on Windows 8.1 (64-bit). I am sorry to hear this, but happy to help!
    For further assistance, I will need the following information:
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies. Copy Text or Mixed Documents.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    If the printer can print from NotePad.
    In the meantime, please take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8.
    Hope this guide helps, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

    Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
    Any other ideas?

    Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
    <Link Edited by Host>

  • There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.

    I've had several users complain of receiving this message after they have filled out and submitted a form.
    There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.
    However the data is being saved in forms central. I can't duplicate the issue on my end but it seem to be happing frequently with other users.

    Do you mind emailing the URL of your fillable form to me ([email protected]).
    I would like to investigate as to what the issue might be with Internet Explorer.
    Sorry for the inconveniences.
    Gen

Maybe you are looking for