There is a problem with the Office database - Office 2011

Good day!
I recently installed Office 2011 for Mac and i'm getting the following error message: There is a problem with the Office database. Excel comes up with the error message but i am able to get past the error and open the application, but it freezes when I try on Word. I have to force quit the application to close it completely.
I've searched online and tried all the suggestions - even those from the discussion board: Problem with Office Mac 2011 database. I've completely removed traces of the software : http://support2.microsoft.com/kb/2398768 and reinstalled using the disc,  as well as followed suggestions to rebuild the database. I also installed the latest Office update: http://www.microsoft.com/en-us/download/details.aspx?id=44026 from Excel (As it was the only one I know of that's functioning after the error message) but to no avail.
Here are the tech specs:
OS X
version 10.9.5
Office 2011 for Mac
Version 14.4.4 (140807)
Update: 14.4.4
Hope you guys can point me to the right direction. Any suggestions are greatly appreciated.

Best ask question on one of the Microsoft boards.
Could try NeoOffice.
https://www.neooffice.org/neojava/en/index.php

Similar Messages

  • There is a problem with the Outlook database.  Your database could not be rebuilt. [-18000]

    For home use, I recently changed from Windows PC to MacBook Air.  I have an iPhone 4 which I synched without problem to the PC.  Since I have used Outlook for years on Windows and trusted advisors assured me Microsoft Office on the Mac is the same as Microsoft Office on Windows, I decided to continue using Microsoft Office.  Because I cannot get my Outlook calendar to sync reliably to iCal / iPhone and because I have found a small but meaningful number of features I use daily in Outlook Windows do not work on Outlook Mac, I have never been in so much pain!
    The latest problem is Outlook does not complete startup.  I get this error:
    There is a problem with the Outlook database.  To use the database, you must rebuild it using the Database Utility.
    I run the utility but it never completes successfully. 
    Step 1 of 5: Scannning...
    Step 2 of 5: Verifying...
    Step 3 of 5: Copying records to new database...
    Step 4 of 5: Recovering data...
    Your database could not be rebuilt. [-18000]
    I have found many articles about this problem but they all seem to assume that you can successfully start Outlook then you rebuild the database to fix data corruption in Outlook.
    What if I Outlook never completes startup?

    Here are the steps that solved the Outlook data corruption problem.
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/your-datab ase-could-not-be-rebuilt/5caff467-3ab2-464a-9fe6-00ad913b5f2e
    The question was:  Your database could not be rebuilt
    The key is to create a new Outlook Identity, remove the database file, then copy your data records into the new identity and use the Outlook database utility to rebuild the database.
    It's a wonderful feeling to see Outlook start up successfully after a few days of downtime!

  • There is a problem with the security certificate of the proxy server. Error code 18 and 38.

    Hi All,
    After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
    Exchange 2013 on a remote location with a CA-certificate.
    Outlook 2010 and 2013 on different locations, locally installed and on RDS.
    When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
    name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
    After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
    site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
    certificate is invalid or does not match the name of the site."
    Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
    - restarting mailserver and AD;
    - restarting switches;
    - restarting routers;
    - restarting RDS, AD and all other servers;
    - bypassed proxyserver for RDS;
    - created a new profile;
    - checked recently installed updates;
    - checked certificate on mailserver;
    - checked RDS on a different location, working fine.
    Nothing helped, what can I do next? Please advice.
    Regards.

    Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
    The first message can be suppressed by adding this to the Exchange config:
    set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
    set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
    Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
    this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
    Not completely where I want to be, any help regarding the second alert is greatly appreciated!

  • Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. after Office Updates.

    I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
    Here is a quick note from the event viewer:
    The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel. 
     Process ID: 1138 
     Start Time: 01d07dcede19c458 
     Termination Time: 15 
     Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE 
     Report Id: 
    Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
    this add-in and check to see if an update is available. Do you want to disable this add-in?.
    I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
    someone could help me get to the root cause of the matter.
    My environment is as follows:
    Windows 7 x64 SP1
    Office 2010 v 14.0.7128.5000
    Adobe Reader MUI X and Adobe Acrobat X
    Feroze

    Hi,
    As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
    I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
    Or contact the support of Adobe and see if there is a known compatibility issue or not.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • There is a problem with the server connection.

    there is a problem with the server connection.
    this server is no longer exits, but when i'm using iphoto this popsup and i don't know how to solver it

    Follow the procedure on the page linked below to repair the database, and if that doesn't work, to rebuild it:
    Rebuilding the iPhoto library
    If you still have the problem after doing that, use the procedure on the page linked below to find and remove the invalid items:
    Connection Failed, Server Does Not Exist

  • IPhoto 11 Upgrade-"There is a problem with the subscription"

    I am running iPhoto 09 right now & I'm trying to update to 11 so that I can use 'Photo Stream", plus the benefits of iPhoto 11 of course. When I go to update I get to the subscribe button & I get the above messege: "There is a problem with the subscription" followed by "Request to the server macappstore://itunes.apple.com failed." Now I'm stuck on how to upgrade from iPhoto 09 to 11 ?? Any suggestions? Should I call Apple??
      Thanks...  

    Follow the procedure on the page linked below to repair the database, and if that doesn't work, to rebuild it:
    Rebuilding the iPhoto library
    If you still have the problem after doing that, use the procedure on the page linked below to find and remove the invalid items:
    Connection Failed, Server Does Not Exist

  • I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message  saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)"   more........ .

    Would someone be able to explain to me the following issue with Iphoto?
    I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
    "Unable to to assemble  calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
    How can  I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
    Thank you for your help.   

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I can not upgrade to quicktime 7.7.3 for windows vista.  Error message says there is a problem with the program installer.  Any clue as to how to get around this.

    I can not download quicktime 7.7.3 for windows vista.  The error message says that there is a problem with the windows installer.  Any clues?

    The error message says that there is a problem with the windows installer.
    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • Downloaded Mt Lion.  Now my facetime launches then quits with message that there is a problem with the  C_L Kernel Plugin.  Everything else works just fine. I can get on line etc.

    I have have an early 2008  imac 8,1  It has been a good machine no problems.  UNTIL we downloaded Mt Lion. We can no longer use facetime.  We click on the icon it comes up, tries to connect then it disappears with the message that there was a problem with the C_L Kernel Plugin.  We can go on line without difficulty, everything else seems to be working.  Searching the internet shows that others have had the same problem with Mt Lion. But so far I haven't found a solution.  We have wiped the drive reloaded snow leopard then downloaded Mt Lion again. We put in a NEW hard drive and reloaded snow leopard then Mt Lion. We have changed out ram using apple ram. But we still get the same result. Everything works except for Facetime.  Is there some patch we have missed?  Facetime DOES work on our ipads without a hitch so I doubt it's the internet connection.  We've tried the imac both wirelessly as the ipads run and hardwired and get no where fast.  So any help at all would be appreciated.  We live in the boonies, the nearest mac repair is over 150 miles away so this is pretty nuch a do it myself affair.  We know the machine is old by most standards today. But we pretty much run our machines until they can't power up.  So we'd like to get this one back on its perch so to speak with its face time working.
    Thank you ahead of time for any advise help given.

    A log may help determine what the issue is ...
    Open the Console app located in HD > Applications > Utilites
    Select: System Diagnostic Reports  on the left.
    Copy and paste the most recent kernel panic or crash log in your Reply.

  • There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

    Hello,
    I have an issue with connecting client SB1H on Windows, the scenario is as follows:
    1.- Server:
         Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
         NDB and Server are review 69 SP06
    2.- Client:
         Windows 8 Pro Virtual Machine on Microsoft Hyper-V
         SB1H PL 11 version 32bits    
         SAP HANA Studio version 1.0.60
    When I run SB1H the following message appears:
    There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
    Any idea what could be the solution?

    Hi,
    Please check SAP notes:
       1993392 - Server components setup wizard: New default values for certificates and single sign-on option
    1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
    Thanks & Regards,
    Nagarajan

  • I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing.  Pls adv how I change this to my new apple Id.

    I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple id
    as there was some problem with the first one. Now at some places still my old apple Id is appearing.  Pls adv how I change this to my new apple Id.

    Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
    The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
    To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad. 
    Go to Settings->iTunes & App Stores->Apple ID->Sign out.
    Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

  • My I phone 4 won't restored  saying there is a problem with the iphone. Appointment made but 5 days away. can anyone help in the meantime

    My I phone 4 won't restored  saying there is a problem with the iphone. Appointment made but 5 days away. can anyone help in the meantime

    You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread:
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error message in time machine: "There was a problem with the user name or the password of the network

    I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
    "The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
    Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
    I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
    Best regards,
    John

    I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
    "The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
    Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
    I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
    Best regards,
    John

  • ITunes won't upgrade to10.5. Error message "There is a problem with the Windows installer package. Contact the package vendor". I need help.

    iTunes won't upgrade to10.5. I'm on 10.1.17.
    When installing 10.5 it terminates with an error message "There is a problem with the Windows  installer package. Contact the package vendor".
    It does not provide an error code or details/description to further troubleshoot. As a result I can't upgrade my Apple devices to leverage the cloud.
    Any smarts out there who could help?
    Using PC Win-7 w/IE 7 (should that matter)
    Thanks much

    I know there's a million threads like this, but I thought I'd record my experience.  I, too, was having the original poster's error when I tried to update iTunes on Windows XP.  I think I was stuck on 10. 
    I solved it by un-installing iTunes and every other Apple app.  I discovered that Apple Software Update would not un-install as its MSI file could not be found.  I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs.  Google "kb290301" for a Microsoft page that includes a download link for it.  After that, I was able to install a fresh copy of iTunes 10.5.2.
    I'm not sure why this app's folder and MSI were missing from my computer.  I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

Maybe you are looking for

  • Source file not accessible after Move project

    After moving a project, one of the source code files cannot be opened. The message: Resource '/Culinaria/src/SearchMenu.mxml' does not exist. But it does exist - it's residing in the src directory as it always has and is visible in the package explor

  • How to put the trace messages in JSP DynPage

    Hi, How to put the trace messages in JSP DynPage components. What settings I need to do and where do I see the trace log. Can I also print the values of some variables in trace. If yes, how to achieve this? Thanks in advance, Regards, Madhu

  • I want to uninstall Oracle 10g from Solaris 10

    Hai All, I want to uninstall Oracle 10g safely from Solaris 10 . I take runinstaller and execute. In the next screen installed products tab appear . I select the oracle products and compnents there but the Remove button not active . I tried many time

  • Can a page-turning SWF to PDF have navigation?

    I'm working on creating a flip-book PDF which needs a Replay button or some other way to get back to the first page OTHER than laboriously clicking back through every single page. In CS4 InDesign, files with Page Turn transistion must be exported as

  • Photoshop CS6 taking a minute to load (Yosemite)

    Hi There, Recently Photoshop started taking over a minute to load - I figured the normal things might be a problem - Brushes / Plugins / Actions etc. So I removed everything, reinstalled PS and started adding back my brushes etc - and the load times