There is no iView available for system "SAP_SRM": object "sc". For more inf

Hello,
I'm using SRM 7.0 and i'm facing the following problem:
When we try to open an existing shopping cart:
"There is no iView available for system "SAP_SRM": object "sc". For more information, contact your administrator. "
This issue happens when a Purchaser click on any shopping cart number in the Purchasing overview screen.
It's working fine in the standard role, but i created a new role with some delta links to objects but it's not working.
I checked the permission on the system SAP_SRM and on the objects they are all:
Name: Everyone (grouoe)
Adminstrator: none
User: checked
The system alias SAP_SRM is well defined and the connection to this system works fine.
Any hint for me?
Thanks in advance,
Regards,
Thomas

It had to do with OBN.
I copied the role but deleted a folder called "Navigation". But all the iViews to wich the shopping cart needed to navigate were linked under that folder.
So just copied again the role but this time without deleting the Navigation folder...and away was the problem

Similar Messages

There is no iView available for system "SAP_SRM": object "Permission".

Hi All,
We have portal ( SAP 7.01 SP3 patch level 3) as the front end for SRM 7.0 ,We have integrated SRM with portal through the system alias SAP_SRM.
When RFx Approver click on u201Cpermissionu201D button in u201CPurchasingu201D -> u201CSourcingu201D-> u201CRFx Numberu201D-> u201CDisplay RFxu201D he is able to see the permission iView where he can assign technical evaluators. But when same Approver click on u201CPermissionu201D button in u201CStrategic Purchasingu201D ->u201DWork Overviewu201D in Alert tab or Task tab( Display RFx page ) is throwing the following error:
"There is no iView available for system "SAP_SRM": object "Permission". For more information, contact your administrator."
I searched in SDN forum and got few solutions and did as they suggested but my problem not yet solved.
those are:
1.     Assign Target iView (Permission iView) in u201CNavigationu201D folder of respective Role (Strategic Purchase)
2.     Make sure system Alias name as SRM_SRM.
3.     Make sure user mapping status should be ok in System Alias Editor.
4.     Should add u201CEveryoneu201D group in permission editor of System Object and make sure select u201CEnduseru201D check box and u201Cadministratoru201D as Read or full control(I selected Full control).
5.     Add u201CEveryoneu201D group in permission editor of u201Ccoreu201D folder of SRM7.0 folder.
6.     Add u201CEveryoneu201D group in permission editor of u201CPermissionu201D business object.
7.     Check the target iViews in respective Business Object (in my case u201CPermissionu201D).
8.     I updated latest patches (patch level 9) as said in SAP note: 0001386141
Anybody knows solution for this problem please let me know. Encourage point will be given to useful postingu2026
Thanks and Regards
siva

Hi Deepti,
Thank you very much for u r quick reply.
I didnu2019t create any custom roles for RFx in Portal side and SRM side also; we are using standard roles provided by SAP. I checked all the iViews which are needed for the Role (in this case u201CStrategic Purchaseu201D role) those are existed in u201CNavigationu201D folder. Should I create custom role and have to assign required iViews to that to rectify this problem?
Thanks and Regards
siva

There is no iView available for system "SAP_SRM": object "po".

Hi,
We are on SRM 7.0.
We get the below mentioned error after selecting the PO in "Purcahsing
view" and clicking on EDIT button to chnage the selected PO:
There is no iView available for system "SAP_SRM": object "po". For more
information, contact your administrator.
We are using the standard SAP portal content/roles to run the
transactions.
Please advise.

Hi,
Please confirm if you have used SAP_SRM as alias name in the portal?
Regards,
Nikhil

There is no iView available for system "SAP_SRM": object "qte". For more information, contact your administrator.

Dear All
I am getting an error in my SRM system.
Er "There is no iView available for system "SAP_SRM": object "qte". For more information, contact your administrator."
I followed the below thread.
There is no iView available for system "SAP_SRM... | SCN
I have assigned the Iview to this role.
The same changes i have done in Development system
where it is working fine.
But in my QA system i am getting this error.
My Portal version is 7.3.
Please help with your valuable suggestion
Regards,
Prashant krishen.

Dear All
thanks for your reply.
I am able to resolve the issue.
In my case there was some parameter missing in transported object.
I followed some steps.
1) I compare the Iview property of transported object with Specialist object.
2) I found that OBN parameter was missing.
3) I include it as per above document.
4)But after that in the rfx response, iview was opening in some tab but when i was trying to open with Overview item i was getting error.
5) Than i search in portal content with *qte*
6) I found more iview in Quotation folder i added those iview in strategic purchaser in navigation folder.
This is how i am able to resolve.
Thanks everybody for you prompt answer and support

Portal error in SRM 7.0 -"There is no iView available for system "SAP_SRM"

Hi All,
We have portal ( SAP EP 7.0) as the front end for SRM 7.0 ,We have integrated SRM with portal through the system alias SAP_SRM.
With the PDP scenario the users are facing the below issue while they try to open any documents ( let it be RFx/contract).
"There is no iView available for system "SAP_SRM": object "cont". For more information, contact your administrator."
We installed the latest JRE (1.6.0.17) in the machine , but it didn't fix the problem. It appears to be a a lorcal issue with the settings in browser as some people ( very few) are able to open the documents.
Any pointers?
Thanks
Arun

Hi Arun,
Pls check the portal content and portal roles with iviews maintained properly or not.
Pls chek this page for ivew and portal role matrix. and cross check with your portal roles.
This might help you.
http://help.sap.com/saphelp_srm70/helpdata/en/27/d1185fd9764001953386c6e10058ab/frameset.htm
Regards
Kiran

There is no iView available for system "SAP_ERP_Manufacturing"...

Hi out there,
I have imported the business packages Common Parts 1.2 and Maintenance Technician 1.2 in our portal testsystem (nw7, sps18). after setting up a system with alias SAP_ECC_MANUFACTURING and asigning the role com.sap.pct.erp.maintech.maintenance_technician to my super admin user I can browse through the navigation of this role and all the iviews do what they are supposed to to (e.g. I can call the "Technical Structure View" and create a notification for an object out of the list)...
When assigning the role com.sap.pct.erp.maintech.maintenance_technician to a test user (with the roles and groups from a simple enduser), I get the following error when trying to create anotification (or doing anything else in the technical structure view): There is no iView available for system "SAP_ERP_Manufacturing": object "notification".
I have checked the permissions in all relevant areas of the PCD. Everywhere there are at least read permissions for everyone. Also I have copied the iView com.sap.pct.erp.common.notification_create to another place in the PCD and added it to the operation "create" of the Business Object "SAP_ERP_Manufacturing.notification" (with the highest priority). But that didn't change anything...
Well, I don't know what else I could do to find out what's wrong. I just hope anyone out there can help me out... )
Best Regards
Juergen Kuechle.

Hi Thulasi,
sorry, but that's not the point. The system with alias "SAP_ECC_MANUFACTURING" is used to call the WD application in the R/3 backend system (which works out pretty fine). The WD application then calls back the portal using the object based navigation technology (OBN). In this case it calls the object SAP_ERP_Manufacturing.notification and tries to execute the iview linked to the action "create" of the object.
And here exactly is the problem that I'm facing. With the super admin user OBN works fine, with an enduser the OBN fails...
Regards, Juergen.

MSS Work Overview issue "There is no iView available for system "SAP_ERP_HumanResources": object "employee"

Hello Expert ,
I am facing the below error when Manager clicks on the leave link under column 'Type Of Leave' . (please refer the below picture)
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
am I missing any configuration ?
Thanks and Regards,
Ravi

Siddharth's response and the SAP Note he mentioned were both very helpful. I received the exact same error message in a different scenario. While the fix was likely different than the one needed in this specific case, it occurs often in custom MSS and HR Admin roles and I hope this helps someone else out. In my case I needed to add the Pages shown below to my Workset and mark them as invisible.
error message:
fix in my case:
Thanks,
Ben Marsh

There is no iView available for system "SAP_ERP_Procurement": object "purch

Hi,
We are currently implementing buyer portal 1.5 in NW 7.3 SP4
Imported BP ERP05 BUYER 1.51,BP ERP05 COMMON PARTS 1.51 in server
Followed the steps given in the link
http://help.sap.com/erp2005_ehp_05/helpdata/en/10/f55f5708cb4b08816c66d48064aa35/frameset.htm
No System created for SRM as we are not connecting SRM system.
We found the following error when we click
Display Purchase Orders for Vendor Button
There is no iView available for system "SAP_ERP_Procurement": object "purchaseorder". For more information, contact your
administrator.
Document Tracing Button
There is no iView available for system "SAP_ERP_Procurement": object "purchaseorder". For more information, contact your administrator.
Regards,
Satish

Hi Satish ,
STEP 1: Login to the Portal with Content Admin Authorization.
STEP 2: Navigate to Portal Content -> Content Provided by SAP -> specialist
-> SRM7.0 -> Core -> Roles -> Open Manager and choose Navigation Folder.
STEP 3: Now navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> Core -> iViews -> Business Objects -> identy the business object in which ita was ont displaying ->
Select Display object ( Technical name is
com.sap.pct.srm.core.iv_display_ctr ) and right click and choose 'Add iView
to Role' -> Delta Link and save.
STEP 4: Log off and login with the user and check the issue.
Hope this will help you .
Thanks & Regards
Pradeep Kumar Dondeti

There is no iView available for system "SAP_ERP_HumanResources": object "em

Hi Experts,
I have a search process iView . When I press on any process and press the detail button .. I get a popup screen which shows detail of the process.
On the detail screen - there is collumn called Form Steps which shows all the steps in the Process . When I click on the one of the steps I get another another browser window with the following error
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
I have checked in the Business Objects and in the employee object I am not sure which iView gets called when u click on the steps link
Need your help in this regards.
Regards,
Akshay ..

Hi Akshay,
We have got the same issue and now it is resolved.
1. It's a known issue and SAP is providing a solution with 7.01 SP6 release. (check sap note 1386141)
2. In order to have workaround for below SP versions, You have to deploy the par file. ("objbased.par for 7.01 SP5").
3. First, please backup the old "com.sap.portal.navigation.objbased.par" PAR file, from the file system directory:
...\j2ee\cluster\serverX\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\
deployment\temp (you will find it with a .bak suffix...)
4. Deploy the par file into your portal using the "Archive Uploader tool:
      - Navigate to 'System Administration' -> 'Support' -> 'Portal Runtime'
      -> in the "Portal Anywhere" Admin Tools section, navigate to
          'Administration Console' -> use the 'Archive Uploader' to deploy it.
5. After deploying the file, please recheck the scenario.
Thanks,
Joseph
Edited by: jo chinna on Dec 14, 2009 12:39 AM

There is no iview available for system SAP_ERP_HumanResources obj employee

Hi Experts,
I'm working on EHP4 and facing an error in ESS -> Career and Job -> Appraisal Documents -> My Appraisal Documents tab and in MSS -> Talent Management -> Performance Management -> Tasks Tab.
Whenever I click on the document icon in My Appraisal Documents tab I get the Error message " There is no iview available for system SAP_ERP_HumanResources. object "employee". For more information, contact your administrator."
In MSS the same thing happens in Task tab but the document in Employee Documents tab opens up fine.
It will be greatly appreciated if anyone can suggest how I can resolve this issue.
Regards,
Seema Rane.

Hi,
We have got the same issue and now it is resolved.
1. It's a known issue and SAP is providing a solution with 7.01 SP6 release. (check sap note 1386141)
2. In order to have workaround for below SP versions, You have to deploy the par file. ("objbased.par for 7.01 SP5").
3. First, please backup the old "com.sap.portal.navigation.objbased.par" PAR file, from the file system directory:
...\j2ee\cluster\serverX\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\
deployment\temp (you will find it with a .bak suffix...)
4. Deploy the par file into your portal using the "Archive Uploader tool:
- Navigate to 'System Administration' -> 'Support' -> 'Portal Runtime'
-> in the "Portal Anywhere" Admin Tools section, navigate to
'Administration Console' -> use the 'Archive Uploader' to deploy it.
5. After deploying the file, please recheck the scenario.
Thanks,
Joseph

There is no iView available for system "SAP_ERP_Common": object "SWF_WIOBN". For more information, contact your administrator.

Hi All
I am working on the POWL inbox in portal 7.3 sp11 .
I have used
Application Name : IBO_WDA_INBOX
Configuration Name: IBO_WDAC_POWL_INBOX
for integration into portal by using webdynpro abap iview template .
We are able to get the task and notification in powl inbox .
But when we click on task item it throwing an error .
There is no iView available for system "SAP_ERP_Common": object "SWF_WIOBN". For more information, contact your administrator.
Can you please provide me any steps how to implement the powl inbox inorder to get the UWL Tasks and notifications into this powl inbox .
And how to resolve the above error .
Thanks & Regards
Deepika

Hi Deepika,
Please go through the below SAP notes:
1854661 - The error "There is no iView available for system "XYZ", object "ABC" is encountered when navigating in an MSS or HR Administrator Portal role
1494536 - Object Based Navigation - Specific Component Note
Apart from this, you can also go through the following link:
http://wiki.scn.sap.com/wiki/display/EP/Object+Based+Navigation+-+OBN+Wiki
BR,
Anurag

No iView for system "SAP_ERP_DisputeManagement": object "dispute_case

Hello,
I'm trying to configure the Business Package for Dispute Management.
However I'm getting the following error when changing a dispute in the portal.
There is no iView available for system "SAP_ERP_DisputeManagement": object "dispute_case". For more information, contact your administrator.
I have looked in the PCD and the object dispute_case is not available. How can I get this object. I thought is was part of the business package for Dispute Management: BPERPDPM08_0-10006118.SCA
Looking forward to your reply.
Kind regards,
Joost Christenhusz

Hello Mark,
We have enhancement pack 4 active in the ERP System. The portal is running on 7.01 SP6.
But the Business Object should be in the Business Package not in de ERP system, isn't it?
Kind regards,
Joost Christenhusz

Is there a comparable automatic back-up system to Time Machine for 10.4.11?

My dad has 10.4.11 running on a G4 tower.
I want to get him a back-up system that will save all his work.   I myself have an Intel Mac running 10.6.8, with Time Machine saving all of my work to an external HD.
I know you can't use Time Machine with 10.4.11   Is there a comparable back-up system to TM that does automatic back-ups for 10.4.11?
(One other note--he still maintains Classic OS 9 on his system as well as 10.4.11.   Will the back-up device also back up whatever he has on OS 9 as well as 10.4.11? And does it also back up the actual system software--the OSs 10.4.11 and 9--as well as all the files? So if he needed the backups, he would not need the system discs?)
Thanks for your help!

I'm sure Tr-Backup 5.1.7 will do everything you want, & far more that TM...
http://www.tri-edre.com/download/download/downloadtbu.html
From the PDF...
Basics ............................................................................... ....................................8
Two types of action: Immediate and Programmed ...........................................................8
What can be backed up or synchronized? ......................................................................8
Bootable copy of your startup disk ............................................................................... ..8
Backing up ............................................................................... ..................................8
Backup placement ............................................................................... ........................9
Restoring ............................................................................... .....................................9
Synchronizing ............................................................................... ...............................9
Multiple configurations ............................................................................... ................10
Backup Strategies ............................................................................... .................11
The copy of your hard disk ............................................................................... ...........11
What kind of backup to use? ............................................................................... .......11
Background execution ............................................................................... .................12
Create configurations for every backup .........................................................................12
Backup of several computers over the network .............................................................12
Back up your backup! ............................................................................... .................12
The Different Modes of Backup .............................................................................13
Manual Backup from the Desktop ............................................................................... 13
Using the Synchronization features ..............................................................................1 3
Immediate Backup ............................................................................... .....................13
Programmed Copy ............................................................................... ......................13
Programmed Mirror Backup ............................................................................... .........13
Programmed Evolutive Mirror Backup ...........................................................................14
Programmed Incremental Backup ............................................................................... .14
The Different Modes of Restoration .......................................................................16
Manual Restoration from the Macintosh Desktop ..........................................................16
Using Synchronization to Restore ............................................................................... .16
Using Immediate Copy to restore........................................................................ .........16
http://www.tri-edre.com/pub/files/tribackup5_en.pdf

No service for system ECC R/3 , for IDOC to file interface in SM58

Hi all,
I am geting a error No service for system XXXXX, client 100 iIntegration Directory,
when i go to IIDX2 and Updating the IDOC type , i am not able to add it is give me a error 100
please help me in this
thanking you

Hi,
Check the threads Idoc adapter - No service for a system in Integration directory
No service for system ... in Integration Directory
Thanks!

There is no iview available for system... (again)

Hi all
I have an ESS 1.50 standard role that does not work when the user needs to display a form from the ASR_PROCESSES_DISPLAY application with the HR_ASR_LIST application configuration and the parameters BROWSER_CONTEXT=AFFECTED_EE_OVERVIEW&NO_HEADER=X&PERNR_MEM_ID=ESS01. This application is called from the portal, but is using a launchpad where the OBN Navigation Mode = "User Set of Roles". I have made sure that the SAP_ERP_HumanResources alias is added to the portal system in question (originally it was not).
In essense the ESS users are unable to display a form through ESS/MENU > My Processes > Status Overview.
I have been through tons of material, and I have not been able to find a solution. I know that I most likely could identify the issue by using HTTP Watch, but it is not possible to use that program in my case.
I have a feeling that the problem lies between the ABAP and JAVA since the OBN call is performed through the launchpad (WDA in LPD_CUST) but the target page is a PCD page (Display form).
Can someone shed some light on this issue? Any help will be greatly appreciated.
Best regards,
Martin Søgaard
PS: The portal is running 7.01 SP 10.
Edited by: Martin Søgaard on Feb 10, 2012 2:37 PM

- 1594921 MSS Add-On 1.0: Corrections for Miscellaneous issues
- 1636891 MSS Add-on:Employee Profile Dumps When User Not Assigned
Please check these notes
also note 1669913 and 1617944
2 from 30
- To explain why OBN navigation fails, we shall understand first how
related activities work.
- In the EE Information page the manager can select an employee from
the result list of the Employee Search iView (based on Object and Data
Provider)
- Then manager select Search Process page, which is associated with
Service Key: MSS_HCM_SERV_RELACTIVITY_SEAR_PROCESSES
refers to
Resource table entry: MSS_HCM_SERV_RELACTIVITY_SEAR_PROCESSES
includes PCD Path:
EYROLES://portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.
bp_folder/com.sap.pct.erp.mss.pages/com.sap.pct.erp.mss.hcm/
com.sap.pct.erp.mss.relatedactivitieslauncher_searchproc_page
iView on this portal page points to the Service Key:
MSS_HCM_HRAS_SEARCH_PROCESSES
this refers to the
Resource table entry: MSS_HCM_HRAS_SEARCH_PROCESSES
includes
PCD Path:
ROLES://portal_content/com.abb.se.portal.ABB/com.abb.SE/Exigo/MSS_Exigo/
Page_Exigo/iview_Exigo/
com.sap.pct.erp.hradmin.14.search_employee_processes
-But for the OBN navigation to be successful, both the OBN source
(Search Processes page) and the OBN target (Display Form page) must be
within the same role. Whereas in above case source page is called from
ROLES://portal_content/com.sap.pct/specialist/com.sap.pct.erp.hr
admin.bp_folder/com.sap.pct.erp.hradmin.11.bp_folder/com.s
ap.pct.erp.hradmin.11.pages/com.sap.pct.erp.hradmin.11.show_processes
Therefore we need to change the PCD path for Resource
MSS_HCM_HRAS_SEARCH_PROCESSES such that Search Processes page is called
from MSS role.
-But Search Processes Page is not delivered in MSS role.
Considering above facts you should change customizing as follows:
- Copy Search Processes page from ERP2005 MSS role to your custom role.
- Maintain the resource MSS_HCM_HRAS_SEARCH_PROCESSES with the PCD path
of Search Processes page of your custom role.

There is no iView available for system "SAP_SRM": object "sc". For more inf

Similar Messages

Maybe you are looking for