There is only one ebook on my lybrary and I can not add more

In this single file I can do all features, bookmarking, reading etc and it saves when I close ADE. I have lots of PDF's and none of them stays in my lybrary after I close the programm, even ebooks we can download from ADE home are not there anymore after I close ADE. What should I do?
Regards
Raphael

Have you tried a soft-reset? http://support.apple.com/kb/ht1430

Similar Messages

  • Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

    Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • User can not add more then two products against one order

    Hi frnd,
    My requirement is in CRM while creating order using CRMD_ORDER transaction. The user can not be entered more then two products against one order.
    I am using CRMD_ORDERADM_I_BADI badi to give error I am unable to use this badi. Is there any other options are there.
    Please do need full help.
    Regards,
    Ashish.

    Hi Amit,
    DATA: gt_header TYPE crmd_orderadm_h. "OCCURS 0 WITH HEADER LINE.
    data: ET_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
    data: gs_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
    DATA : gt_header_guid     TYPE     crmt_object_guid_tab.
    DATA : gs_header_guid     TYPE     crmt_object_guid.
      gs_header_guid = IV_HEADER.
    *INSERT gs_header_guid INTO TABLE IV_HEADER.
      CALL FUNCTION 'CRM_ORDER_READ'
        EXPORTING
          it_header_guid       = gt_header_guid[]
        IMPORTING
          ET_PRODUCT_I         =   ET_PRODUCT_I[]
        EXCEPTIONS
          document_not_found   = 1
          error_occurred       = 2
          document_locked      = 3
          no_change_authority  = 4
          no_display_authority = 5
          no_change_allowed    = 6
          OTHERS               = 7.
    endmethod.
    I am using ds code. Its working fine records are coming in Product. But how i will save product into one
    itab.
    Regards,
    Ashish S

  • The music on my iPhone 4 with the new ios7 is not working. There are red  dots next to the selections and I can  not here any music when I touch the  spots. I just downloaded the iOS 7. What went wrong?  Everything else seems to be fine

    The music on my iPhone 4 is not working. There are red dots next to the selections and no sound occurs when they are touched.

    Can you play those songs in iTunes on your computer?
    Make sure they are all part of your iTunes library before you sync and that they were bought with the same AppleID you use on your phone.

  • How do I delete a edited album from my iphoto?  There is only one photo in that album and I have tried everything. I deleted it from my ipad album.

    How do I delete an edited iphoto album from iphoto? It is driving me batty...it should not be this difficult. I am beginning to think it's not possible....I hope not...I would hate to think this will happen every time I edit an album.

    Hi turintest2
    Thanks for taking the time to respond - however your reply didn't really help as you haven't explained how to delete the compilation album that had been created.
    I managed to sort it out by doing the following (I'm posting this so that it may help others).  I don't know if this is the simplest/most elegant solution - but it works.
    In iTunes, find the compilation (in my case, the 153 songs) and, starting with the first song, follow this procedure:
    On the iPhone go to 'Songs' and scroll down the list until you find the first song that was listed in iTunes (above).  You should notice (as in my case) that the song will have the correct title (and artwork too if you'd found this previously before making the compliation) but the wring artist.
    Swipe LEFT and press the 'Delete' button.
    Repeat with second song in iTunes list, deleting the individual songs from the iPhone, one by one.
    Although tedious, this seemed to work for me.  Reason for doing down the iTunes list is that it is in a pseudo-alphabetical order and I wanted to make sure I'd got every one.
    Now busy re-importing the original albums from CD.
    Thank you APPLE for making this such a laborious process.  Why can't designers actually TEST the products they design so that they can appreciate first-hand the likely problems?
    Anyhow, thanks turintest2 for trying to help me - it was appreciated.
    RB

  • Where are all my bookmarks? I have done all the checks in the FAQs. still no bookmars and I can not add any new ones to replace the lost ones either

    After number two daughter "played with" this 'puter. I have lost all my long and well established bookmarksl The bookmark tab no longer displays a dropdown list of the web addresses trhat it always has done in the past. just a useless blank page with meaningles divisions.
    I have tried to reinstall the bookmark by importing them from a previous HTML file and I have tried restoring them from a JSON file, both of which are up to date as of this morning.
    Nor can I rebuild the data because I can no longer add any bookmarks
    I have even uninstalled and reinstalled the latest version of Firefox. Still nothing. If this is a result of an automatic upgrade, the words "chocolate teapot" spring to mind.
    If this is the work of number two daughter, then it is no Father Christmas this year unless you can restore my missing bookmarks to their previous glory, and quickly.
    (The bookmarks are still in the HTML file and I could use them at a pinch. But why should I have to swop between two programmes when up until now they have worked perfectly?)

    Progress report - Curiouser and curiouser! I reloaded Firefox having completely cleared out previous(uninstalled and cleared our all registry references)
    After reload I put the bookmarks HTML file in the Mozzilla folder and ran Firefox. After five or six seconds, it sprang into life complete with all the old bookmarks in place and all useable. I have since tried to add one more and now they have all vanished again!!!!!!!
    So far I have followed all the suggestions in the Mozzilla "do this to repair the problem" pages on the web. Uninstalled and reinstalled three times, run various 'repair' programmes including the ones directly dowloaded from the Mozzilla website. Used the 'go back to previous saved data' option and reloadedm the data from a previously saved HTML programme. Done all this more than once, only to be back where I started with no bookmarks, and no SQLITE file nor folder found on any hard drive.
    The 'puter is sitting behind a hard wired firewall (old computer acting as firewall) plus a good anti virus and firewall software programme running as well. I don't think I've been hacked but I am beginning to wonder. Twice is coincidence, more than three time sounds more like enemy action!
    Strange that everything worked following the last reinstall, only to vanish again when I tried to add one more bookmark

  • HT4623 I have a Ipod Touch 4th Gen, 8 GB and it only has iOS 4.3.1 and I can not get it download any apps from the app store. It says that our iOS system does no support it. Please tell me what to do, it's been like this for a month now and I can't figure

    Just let me know if you know how to fix this!!! I am in desperate help right now. It's been a month and still can't use it plus we are going out of town and was wanting to take it with us to use.

    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • I updated to iOS 5 and not all my ringtones are not there and I can not add anyone to my contacts

    I updated to the new operating system and now not all of my ring tones are on my phone and I can not edit or add anything or anyone to my contacts unless they are my favorites. Please help.

    Connect via cable to the computer that you use for sync.  From iTunes, select the iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "no" to creating a backup.  (You don't want to overwrite the backup file with blank data.)  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPod.  This time, say "yes."

  • Been having trouble in pogo for few days now only with firefox installed new version and still can not get into games please advise can play in explorer but I did enjoy fire fox

    I would like to know why I can't play any of my games in firefox from pogo. Have no problem in other sites. I used this all the time until three days ago but could not get in so went to explorer. Where it works fine. I uninstalled old firefox and put installed new version but the problem still remains. Would appreciate you looking into this for me. Thank you Jan

    Malkymder wrote:
    Glad to hear it is a step forward ...
    can you try with another Display manager like lightdm see if that works ?
    I might try that, though now that I finally have my PC back I have some other work that takes priority for a few days. :-)
    Malkymder wrote:And yes xorg.conf should be replaced with /etc/xorg.conf.d/20-nvidia.conf instead
    I'm using `nvidia-xconfig` to generate that file (I haven't had to tinker with it manually for years now).
    The tool generates this 'deprecated' file. Should I just move its exact content to the new location?

  • Why is there a blue dot by my facebook app and I can not open it

    I have a blue dot on my facebook app and can not open

    The blue dot means that it has been updated and it has not been used since it was updated. If you cannot launch the app, try a reset first and see if the app will launch.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Two SSL Certificates when there is only one

    I am getting my server set up with third party authentication.  Everything is checking out except that when I do a check, my server is reporting two certificates that are completely identical.  However, there is only one in the certificates section and only one in the keychain.  I am lost as to why it is responding with two certificates.  Because of this, my third party SSL certifier is stating I am improperly configured.

    OS X Server will create a self-signed certificate on initial setup.  For example, let's say your server is mini.cpnea.com.  A self-signed cert will be created on initial server setup.  Then you purchase one with the same host name, mini.cpnea.com.  Once you install it, the server has two, the self-signed and the 3rd party trusted one.  To get rid of the self signed, follow these steps.
    1. Launch Server.app
    2:  Select Certificates from the sidebar
    3:  Reveal the popup "Secure services using" and select your purchased cert (the icon should be blue as self signed are brown).
    4:  This will release the self-signed from being in use
    5:  Click on the Gear button and choose Show all Certificates
    6:  Select the self-signed (brown) certification and then press the - button to delete it.
    That should do it.
    R-
    Apple Consultants Network
    Apple Professional Services
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

  • I have just downloaded Elements 11 & there is only one frame (basic) in collage, how do I get more?

    I have just upgraded from Elements 7 to Elements 11 but find in the photo Collage there is only one frame, how do I get more, my old 7 had a good variety???

    Hi Wobygong5,
    I am afraid PSE11 has just one theme, ie. Basic.
    However you can go to Expert mode, and then create a new image of the size you want, and then insert frames from the Graphics panel. You can insert as many frames as you want.
    But Photo Collage will offer you just one theme.
    -Rahul.

  • How do I capture tape-based media to my external hard drive?  There is only one firewire 800 port on the back of my I mac.  The manual says to import tape footage directly into fcpx, but then I lose my external hard drive.   thanks for your help.

    In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive?  There is only one firewire 800 port on the back of my I mac.  The FCPX manual says to import tape footage directly into final cut, which works, but then I lose  my external hard drive    Do I  have to import it into an event, then copy it over to an external hard drive?  On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media.  How is that done?  I can only get either the camera to appear OR my external hard drive.   thanks for your help.

    Thanks for your response, but that doesn't solve the problem.  Yes, the LaCie hard drive has 2 firewire ports-
    I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
    does not appear.  It only shows up when I DIRECTLY import the footage via firewire.  ????

  • I am no longer able to use a keyboard shortcut to close a window when there is only one window open.

    I can use Command+W when there are multiple tabs open to close one window at a time, but not when there is only one window remaining. It's driving me crazy because I have to click on the red dot. It won't close with File > Close either. Nothing changed (that I know of) from last week to this that would cause this. It works fine in safe mode but I can't figure out what's conflicting. Also, I've tried reinstalling Firefox but that did nothing. Help?

    Problem solved! It's the Evernote add-on. They updated something on November 6. I've disabled it until that quirk is fixed. Thanks.

  • 3D Axis System (bar type) doesn't work when there is only one z-channel

    Hello,
    I have a problem with a 3D Axis System, bar type.
    Everything works fine as long as the y-channel contains more than one value (meaning there is more than one z-channel too).
    But when my y-channel has only one value, and there is only one z-channel, the axis system goes blank (there is just an empty white field with a thin outline).
    I don't understand why it doesn't work that way. The length of my one z-channel is the same length as my x-channel, as it should be.

    HI, 
    could you describe your hardware and software setup?
    If this is possible please attache your project.
    Roman Rolnik
    Application Engineer
    NI Germany

Maybe you are looking for