There was away (before Mavericks) I could single click on an email and it would highlite but not open.  I could either delete or second click and the email would then open.  Can anyone tell me how to configure the prevue pane to that end with Mavericks?

There was a way (before Mavericks) I could single click on an email in the "prevue pane" and it would highlite but not open.  I could then either delete it or click again and it would open.  With Mavericks that doesn't seem to be available making it impossible to delete an email in the prevue pane before I open it.  Its frustrating to have to go through all the monkey motions when I know I want to delete it from the get-go.  Does anyone know who to configure for that operation?  I'm using an iMac. 

Wow,  have you ever seen 1 Billion in hard cash?  If not, I assure you it exists as well. 
Try not to pick apart what others write because you "have not seen it." 
I run TWO programs for protection of my MAC now and have been for sometime b/c developers of them become complacid thinking MAC is impermeable. 
My MAC locked me out of it and two externals and when I finally did get back into them Norton Anti-Virus found a "worm."  When I asked the program to find the origin, it was traced back to an email, as you said, that I opened unintentionally.  I still have two external HDs for backup and a cloud backup now. 
When ClamX ran after Norton was finished, ClamX found what it called as "spyware," and it's origin was in my email also.  I tried to delete the emails after the programs (both) identified the infected files, however once deleted and the computer is restarted, they were still there because I ran the scans again. 
Now since we are no longer talking about how to turn on and off the view pane in apple mail; riddle me this,  why can't the developers of these antivirus and antispyware/malware programs get together and develop ONE PRODUCT that catches 90-95% of the viruses/worms/spyware/malware ect that get onto MAC's?  Is it because they are too busy thinking they don't exist? 
I still run both programs and feel protected between the two.  If Norton said it was a "worm" then I believe it was a worm and if ClamX called it "spyware" then I believe it is spyware. 
I had to wipe my MAC and do a fresh install to get it working again, then I had to open one of those externals (which was very, very difficult) multiple times until finally it displayed the message "you can view, but not change the data."  I exported as much as I could to my cloud and I had to format both of those too. 
I still run both programs as I feel protected between the two.  If Norton tells me it is a "worm" then I believe it is a "worm;" if ClamX tells me it is "spyware" then I believe it is "spyware."  If it happens again, which my hope is that it won't, I will be more than happy to send the infected files to you!!
Try not to "forum rage."  Support forums to post experiences and find answers, not nit-pick or claim not existance b/c you have not experienced it for yourself.

Similar Messages

  • I installed OSX server 10.6 snow leopard on my IMAC, but still have choppy videos. can anyone tell me how to fix the problem

    I installed OSX server 10.6 snow leopard on my IMAC, but still have choppy videos. can anyone tell me how to fix the problem

    By your use of "still", did this problem exist before OS X Server was installed?  OS X Server itself has no particular linkages to video processing, beyond what OS X client provides.
    Some details on the configuration might be useful.  Are these videos you're having issues with stored locally in files, or are these videos received over the network and played?  If the videos are local, have you tried playing the videos from a different disk?  If the video files are remote, can you download the videos and play them as a test?
    What software are you using to play the videos?  QuickTime?  QuickTime X?  Does using VLC or another player work better?  There are some discussions of choppy videos around the forums, too.

  • Can anyone tell me how to change the language in the app store?

    can anyone tell me how to change the language in the app store?

    But before making the upgrade to Ios 5 I was able to have the iTunes in italian (since in Switzerland we speak german, french and italian) but now only the blody german is available, i can change the IPAD language to italian or english but the iTunes dont change .... so pist off... i cannot use it!!!!!

  • Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched?

    Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched or activated?

    If it's not printed on the card, then you'll need to check the receipt from the purchase of the card. There's no way to check the value from the card itself without redeeming it.
    Regards.

  • Hi, I recently changed my username for my iTunes/iCloud account. Can anyone tell me how i change the username on my iCloud iPad? When I go onto setting to change it it keeps the username grey so I can't even select it?

    Hi, I recently changed my username for my iTunes/iCloud account. Can anyone tell me how i change the username on my iCloud iPad? When I go onto setting to change it it keeps the username grey so I can't even select it?

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • Can anyone tell me how to send a PDF file so that it opens up in the body of the email itself? Thanks

    Can anyone tell me how to send a PDF file so that it opens up in the body of the email itself? Thanks

    That is a function of the recipient's e-mail software understanding what your software sent.  If it doesn't it will always show as an icon or attachment.   It is also a function of both your internet provider and their internet provider accepting messages of that size, and a function of their download attachment settings in their e-mail program.  There is no way to guarantee it will appear inline in the attachment.   The best you can do is attach with Windows Friendly format.  To do that, use the attach toolbar icon that looks like a paperclip, (View menu -> Customize toolbar if invisible) on Mac OS X Mail when composing the message.   A checkbox appears in the file dialog box's bottom to make it Windows friendly when you navigate to pick the PDF file.  That makes it as universally compatible as possible.  It still may not appear inline, but at least you are less likely to be incompatible.

  • The option to sync apps is no longer available in iTunes, though it used to be. Can anyone tell me how to access the sync apps button please?

    Can anyone tell me how to access the sync apps button please? I used to be able to select it but it is no longer visible.

    You have to connect and select iPhone in computer iTunes Sidebar.
    If you don't see the Sidebar, toggle it on in iTunes menu View > Show Sidebar.
    Take a look at this screenshot on updating apps.

  • I used a terminal command to show the Library in the User folder, and now the Finder is behaving erractically.  Can anyone tell me how to reverse the show library terminal command?

    I used a terminal command in Lion to show the LIbrary in the Users folder, and now the Finder is behaving erratically, hanging up and becoming almost paralyzed.  Can anyone tell me how to reverse the terminal command for show Library.  The command I used was:
    chflags nohidden ~/Library/

    Showing the Library folder will not cause the problem you've described. Nevertheless:
    chflags hidden ~/Library
    will hide the folder. To reveal the folder:
    chflags nohidden ~/Library
    Note, there is no "/" after Library.

  • Please can anyone tell me how to download the flash player to allow virgin anytime on ipad3

    Hi There,
    Please can anyone tell me how to update the flash player on ipad3 to allow virgin anytime to play?
    Regards
    Gary

    Adobe has not made a version of Flash for the iPad.
    Kappy explains why. https://discussions.apple.com/message/19446567#19446567
    5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/
     Cheers, Tom

  • Can anyone tell me how to change the names of the networks I have set up on Airport Express

    Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

    Hi mkl1961,
    Happy Holidays!  The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.  
    Resetting an AirPort base station FAQ - Apple Support
    http://support.apple.com/en-us/HT3728
    What default settings will my AirPort base station have after a hard or factory default reset?
    AirPort base stations are set to request an IP address by DHCP.
    AirPort base station passwords are "public."
    AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    *A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port.  You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
    Airport Express Setup Guide
    manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
    I hope this information helps ....
    - Judy

  • Can anyone tell me how to remove the owner when setting the location

    Hello,
    Can anyone tell me how to remove the owner when setting the location?
    Properties
       Table Name:  (Table Name)
       Table Type:   Tables
       Owner:           Public
       Overridden Qualified Table Name:  (Table Name - same as above)
    Any help would be appreciated.
    Thanks
    Ann

    Hi Ann,
    please check this document to determine the correct space for your question:
    Find Topic Spaces on SCN (Forums)
    If you need help moving it, let me know!
    Thanks,
    Kristen

  • I bought an apple iphone4 from a friend and they had lost and dont remember the apple id nor password can some tell me how to reset the phone and or both

    I bought an apple iphone4 from a friend and they had lost and dont remember the apple id nor password can some tell me how to reset the phone and or both

    It is not possible. You have hit Activation Lock, an anti theft measure. The last owner is the only one who can unlock it with their Apple ID. Tell them to go here
    https://iforgot.apple.com/
    Cheers
    Pete

  • I am new to Mac Pro but am purchasing one online.  can anyone tell me how to get the information from my Toshiba onto the Mac.  there are no stores in the state I live in.  Do I need to find a location and will they do a transfer from my I Tunes etc?

    I am new to Mac Pro and am purchasing one online  tonight.  Can anyone tell me how to get my information - Itunes, photos, and videos transferred onto the Mac from my Toshiba.  the state I live in doesn't have an Apple store but I could take it to Minneapolis when I go.  Any ideas where to begin?

    You might profit from a visit to a Minneapolis Apple store. With a brand new Mac, I think they will be most helpful - not just with transferring files, but with other advice as well. And I strongly recommend you invest in a back up drive. The Apple folk can help with that as well.

  • I am trying to export a video from Premiere Pro.  I have both audio and video checked and the sequence is active but only the audio exports.  There is no video at all.  Can anyone tell me how to get the video to export.  It was working fine until today.

    Premiere Pro CC has been working fine until today.  I have completed my sequence and it is active.  I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate.  I am choosing entire sequence.  The audio exports but the video and title does not.  Can anyone tell me how to troubleshoot this so I can complete this project?  Please!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Hi can anyone tell me how to make the forms url short to the end user

    Hi,
    Im using oracle forms 11gR2 and everything is working fine, but my question in how to make the forms url short to the end user.
    For example my forms url is  " http://localhost:9001/forms/frmservlet "  now i want to modify this url as   "myweb.gov.ae"
    can anybody suggest me the possibilities to change to default forms url to our own url as mentioned in the above example.
    Thanks & Regards,
    Hari

    You would have to either -
    * edit the code pointed to by the new action attribute to
    include the form
    processing and email generation, or
    * edit the form processing script to also include the insert
    record and
    check user name scripting
    The former is probably the better procedure, since I suppose
    you'd want to
    do the check user name before sending the email.
    Unfortunately, this means
    you will have to get your hands into the code, or hire
    someone to do it for
    you.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ducati1" <[email protected]> wrote in
    message
    news:gkriis$et6$[email protected]..
    > Hi guys.
    > I have a page with a form on it here.
    >
    http://www.thechallenge.net.au/superredemption.php
    > I want the data placed in the textfields within the form
    to come to me in
    > an
    > email upon submission.
    > Now normally I would action the form to use this page
    here
    >
    http://www.thechallenge.net.au/Redemptionform.txt
    > But because the action of the form is now <?php echo
    $editFormAction; ?>
    > due
    > to an insert record and check user name server behavior
    I cannot use my
    > normal
    > method.
    > Can anyone tell me how I can get around this problem?
    >

Maybe you are looking for

  • Error in simple javascript search web-part.

    Hi everybody. I need a help. I want to write simple sharepoint farm solution web-part (not App) with javascript for search like describe http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2013/04/18/how-to-query-search-with-the-sharepoint-201

  • What's the best way to delete old iphoto libraries

    I have an old library that I created in iPhoto 4 so that my parents could see their vacation pics. I want it off my hard drive and don't need it anymore anyway. Can I just drag and drop the whole library in the Trash? I'm using iPhoto 8 now, so it's

  • Nano Repair Turn-around time

    I was just wondering if anyone had any recent experience with how long it is taking to get a repaired/replaced Nano (i.e. how long after your support ticket has gone to "Replacement Ordered / Order Created" to when it actually ships and is received).

  • Populating Users With Open Directory Archive

    I have a New 10.8.2 Lion server that I would like to bring all the 10.7.5 users over. what is the best way to do this. It seems that the 10.7.5 arcive is not compatable with 10.8.2.  Any ideas would be great. I can't upgrade the 10.7.5 system becuase

  • Changing a chart title dynamically

    Hi all. I'm on apex 3.1.0. I have a list_item with some values and a chart that depends on the value of this list item. I have no set at the moment title of this chart. What I want is to set title depending on value of my list item. So if value of li