They say my iCloud is full. My computer says 22 G out of 25G available. Have tried making contact but it's the most unhelpful help system imaginable.
They say my iCloud is full. My computer says 22 G out of 25G available. Have tried making contact but it's the most unhelpful help system imaginable. Is this the only way to contact the people who sell this stuff. Have tried phone. Doesn't work.
iCloud can be used in two ways.
The first is a central storage location for documents and data used by apps/applications, that enabled you to open that app/application on any device and see and work with your documents regardless of which device you are working on. A simple example would be to start a pages document on your Mac and then complete it on your iPad, without any copying, moving, uploading, searching through filing systems to make this happen.
The second use is for back ups of your mobile device, which can be used to restore those devices should the need rise for whatever reason.
The concept is all quite simple really, although it can become a little more difficult to understand where things might be going wrong if you find yourself in such a situation.
Similar Messages
-
I made a keynote then saved it to a flash drive. When I tried to open the keynote on another computer using the flash drive t says, "keynote quit unexpectedly". I have tried multiple times but it never worked. Please help, thanks.
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
I need help
Suddenly when I call people I can't hear a ringtone, I can see the call is connected, but I can't hear them. If they ring me I connect the call but I can't hear them. I have rebooted, but it made no difference. Any suggestions pleaseHello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?
Deauthorizing won't delete anything, and all your purchased content is safe. You will just have to reauthorize any of the other computers that get deauthorized along with your computers old machine id.
To get your purchased content back on that computer, just use iTunes to redownload it (http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US). Of course, music you ripped from CD or got from another source you'll need to copy those files back over. -
What USB 3.0 card should I get for early 2009 Mac Pro so I can connect the Drobo 5D? They say get CalDigit or Sonnet. Anyone have preference or experience with reliability with this. I am running Lion and Trying to find which is better as I know from experience not all cards are created equal. Thanks in advance for your help!
yakov536 wrote:
High Point RocketU Quad USB 3.0 for Mac is working great for me. Had an issue with CD/DVD Drive which was resolved with most current driver downloaded from the support site.
Running Moutain Lion on Early 2009, mirroring two Seagate Go Flex 2TB USB 3.0 Drives. Installed in Slot 4.
Using it primarily with VMWare Fusion for Virtual Drives. Windows, Unbuntu and other OS running really well.
HPT Support was responsive and very helpfull using the WEB Portal under the product page.
I have some comments and a suggestion:
Have you tried your setup with a SD/CF combo card reader (like the Lexar or Kingston FCR-H63)? Does the card appear on the desktop when first plugged in?
Did you need to fool around with any kind of power issues in installing this card in the x4 PCIe slot of the MacPro?
Suggestion. Have you tried one of the fixed in this article to cure the BT issues in MacPro 3,1?
Good luck.
Henry -
My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1
Actually, try this instead. On the apple tv, under settings > Audio > Dolby digital
Change it From AUTO (default) to ON
That worked for me. All my eyetv encodes have stereo and 5.1 tracks. For some reason the auto option forces stereo. Setting it to ON forces the 5.1.
Everything sounds nice again! It's just stupid that apple puts AUTO for the default and that setting results in stereo not 5.1. -
I have tried making a new playlist, and have synced it a gazillion times. This all happened when I bought a new computer and transferred my Ipod to it...with upgraded Itunes software. I have tried everything.
Thanks -- actually I worded the question wrong. I was trying to find my songs icon and kept reloading Itunes to try to find it. All I could get was the store. I finally figured out how to reset the desktop and I got my icon back. Thanks for your answer.
-
I'm trying to scan but instead of the scan a message comes up from PS saying "An error occurred while communicating with the scanner." help- I cannot scan!
Best practices: Usage
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing works. Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!
See this article:
http://support.apple.com/kb/ht3964
Find the section that applies to your computer, and follow the instructions.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
I have my contacts synced with icloud and exchange. I want all of them to be synced via icloud, I have tried turning contacts off and then clicking merge but that doesn't copy all of them over. How do I transfer all contacts onto my phone and then icloud?
Welcome to the Apple Community.
If you can't do this on a computer, which would be much easier using drag and drop, then you will need to share the contacts with yourself in order to move them to the iCloud account. -
I have tried to buy new tunes from the store on a new computer and it is saying that I have to answer security questions for which I do not have the answers. How can I buy new tunes if I can't answer the security questions please?
https://discussions.apple.com/message/20480446#20480446
-
my phone has gone into recovery mode on its own. says to connect to itunes. i have restored it 10 times and it does nothing please help me i am out of the country and desparate
Open iTunes on computer. Connect iPhone to computer. If the iPhone is recognized in Recovery Mode, then Restore the Firmware. If not recognized, then hold both Home and Power Buttons until the iPhone is recognized in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.
-
my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.
Hi
Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
On the other had ipad is connecting to other iPhone but only not mine.
Still showing ipad not supported message. And also shows not paired.
Please help. -
i cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data network, please help me guys thanks.....
Thanks for the quick response. No, I did not get any error messages or any terms-of-usage screen. The employee I told my problem to was not computer savvy either. She just suggested I move to different spots w/in the library to see if that would make a difference. It didn't. When I connected to the library WiFi it did change the Verizon 3G that is usually in the upper left corner to iPad with two to three emanating arcs. I may have to go to the library in the next town. I was able to connect to theirs in the past when I had to download something greater than 20 MB. Unless I really want it, I will probably not even try to download something more than 20 MB due to the hassle. Yeah, I may have been better off getting a normal desktop or laptop and getting WiFi at home. To do that now would mean having my iPad 2 and a desktop computer, which I feel is extravagant. (I know there are a lot of big spenders out there who got the iPad as additional gadget for fun. This is a rich country.) A Verizon rep told me I couldn't set up a WiFi router at home just using an iPad. So it seems like a person who just uses 3G is limited to surfing the net (not even much YouTube because it eats a lot of data) and using email. I read about an app that helps print wirelessly using 3G, but a reviewer said you had to be an engineer to get it done right. BTW, I like the Steelers. I'm old enough to remember Franco Harris and that blond guy whose name escapes me back in the '70s. Since I live in North Jersey I feel I have to support the Giants. But I know football about as well as computers.
Maybe you are looking for
-
Fixed Asset and Depreciation method in SAP B1 2005B
Hi All, I want to know what is the method by which we can do depreciation for fixed asset in SAP Business One 2005B. Looking for a postive response from all. Regards, Kawish
-
Need help with sending email notifications via OEM
Hi Folks, Objective: To setup email notification if the listener or the database instance goes down Version: 10 g Rel 2 I have setup the email from OEM. I have verified the configuration by successfully sending myself test emails. I have configured t
-
I am looking for some advise on how to mirror my Mac Book Pro to my TV. I have purchased an Apple TV
-
Creating a time lapse from a video
Is there a way in iMovie 09 to discard frames in order to create a time lapse from a video that has already been shot? I realize that the normal way to create a time lapse is to assemble a group of stills into a video. What I'm looking for is sort of
-
Can one do the excercises in the SAP Training Manuals in a IDES system? Will all the ready-made test data be there as you follow same as the instructions in training manuals? Thanks