ThinkPad Presentation Director

Put Win 7 on the G 41. Lost the Presentation Director. Is Lenovo working on a download to work with Win 7 for that OR is there 3rd party software to take its place? The generic driver Win 7 installs will not recognize the second screen (digital video projector).
Nick629

Whoa, someone with the exact same T61 model as me. I too have a 7662-CTO, and I own a Samsung SyncMaster 205BW (20inch widescreen monitor with native 1680 x 1050 resolution).
I have experienced no problems is displaying 1680x1050 with the Nvidia Quadro 140M. I haven't installed any special monitor driver file, but maybe your Samsung model needs one?
Judging from the pictures you posted, I would try the monitor config settings on the monitor itself. Can you try to adjust the picture there? Also, what exactly are the steps you using to get the output? I typically have just done it within videos where I select the external display and say "extend desktop to external monitor" and then slide the resolution setting to 1680x1050 and it comes up fine.

Similar Messages

T42 LCD is dark, external monitor sometimes works, Presentation Director seems worthless

On Friday, my LCD went dark. When I looked really hard, I could see all the screens that I'd been working with, but I couldn't bring them to light. If I shut the cover and waited for the machine to suspend itself, then opened the cover, I'd get the LCD back, for 10-15 minutes. Then the LCD would go dark again.
When I connected the T42 to an external screen, the LCD contents appeared on the other screen, and then the the LCD came back. While I had screen(s), I did a bunch of system updates (from Lenovo) and ran PCDoctor several times. Everything checked out.
When I disconnected the external drive, I lost the LCD again. I tried to work with the Presentation Director, but the T42 just doesn't want to obey. The Fn F7 keys are working inconsistently. I am in doctoral student hell, facing (what feel like) already impossible deadlines and I have to get this thing working. Does anybody have any suggestions?
Here's info that may or may not be relevant. Thank you in advance....
T42 2373
XP Professional
BIOS 3.23 IRETDRWW
ATI Mobility Radeon 9000
ATI Control Panel 6.14.10.5154
ATI Hydravision 3.25.0006
ATI Display Driver 8.133.2.1.1-061116a-040094C

Welcome to the forum!
Prior to this last episode, was your LCD reddish/pinkish on initial boot, or when running on battery?
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

SL300 - Ultranav Driver, EasyEject utility, Presentation Director

Hi,
I have problems getting the touchpad to work and quite few other features after installing win7.
Right now the UltraNav driver wont install, tried both versions:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70340
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#unav
I installed the UltraNav Utility, got no errors on this install:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67226
Anyone else having troubles getting the driver to work on a SL300?
I also cant find a compatible driver for EasyEject and Presentation Director - any tip on where i can find one or when it might be released, would be awesome
And, I am still worried about the registry patches:
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#unav
Will these work on win 7? Should i install them when they are noted as compatible with vista?
Thx
G
Lenovo Thinkpad SL300
Original description: T5670(1.8 GHz), 2GB RAM, 160GB 5400rpm HD, 13.3in 1280x800 LCD, Intel X4500HD, CDRW/DVDRW, Intel 802.11agn wireless, Vodafone WWAN, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Fingerprint reader, Camera, 6c Li-Ion, Win 7 RTM

Hi,
I only get a message of: Install Failed! ThinkPad UltraNav
And the link about the registry:
http://www-307.ibm.com/pc/support/site.wss/MIGR-70413.html#inf
Thanks for looking into this
Lenovo Thinkpad SL300
Original description: T5670(1.8 GHz), 2GB RAM, 160GB 5400rpm HD, 13.3in 1280x800 LCD, Intel X4500HD, CDRW/DVDRW, Intel 802.11agn wireless, Vodafone WWAN, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Fingerprint reader, Camera, 6c Li-Ion, Win 7 RTM

Problems with Presentation Director

Hello,
I enjoy really to work with the Presentation Director (PD); I also enjoy now working with Windows 7 x64
But the problem is, that the PD doesn't work for me on Win 7
In the best case it does nothing, in the worst case it tries to change the settings ever and ever again and makes it impossible to do anything else! A logoff is at the latter the only help ...
Is there any solution in sight?
Thank you very much!
With very kind regards,
sonny
Message Edited by sonny_G on 05-28-2009 04:07 PM
ThinkPad T400 | 2767-2MG | Windows 7 Professional x64
ThinkPad T60 | 2007-63G | Windows Vista Business x86

hubertlam wrote:
For me, Windows 7 works well enough without Presentation Director -- it actually remembers your settings!
Yeah, what Hubert said. I kind of stopped using Presentation Director when Vista came out - although Presentation Director works OK (it does what it says it will do), I honestly don't think it is necessary any more.
I frequently switch back and forth between a dock with an external DVI monitor, using the laptop by itself, and using the laptop with an external projector. The computer manages to figure out on its own what it is connected to and send the signal out to the right device. I don't think I have used Presentation Director since the end of 2007. I just don't need it anymore, and I find that the "simpler" I can keep the computer (meaning, the fewer the number of little helper applications are installed), the easier life is.
Truth be told, same goes for Access Connections, although I don't use a VPN or anything complex like that.
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

Does Presentation Director support rotated monitors on nVidia cards in a T61?

I'm finding it doesn't. Some of the people here have extra monitors they like to rotate 90 degrees. Presentation Director is not happy.
Any ideas?
ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
Windows 7 Enterprise and Windows XP Pro

I'm finding it doesn't. Some of the people here have extra monitors they like to rotate 90 degrees. Presentation Director is not happy.
Any ideas?
ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
Windows 7 Enterprise and Windows XP Pro

Presentation Director - Docked?

I have noticed that in Presentation Director there is a section in the settings labelled:
"When notebook is docked."
"Immediately apply this Scheme..."
However, this section of the options is always greyed out for me, so I cannot select that option. They option is unavailable regardless if the laptop is in the docking station or not.
How do you use this docking feature with presentation director?
ThinkPad T61 (7662-CTO) Core2Duo 2.2GHz 2 Gig RAM 1 Gig Turbo Memory 160 Gig HD 5400 rpm
nVidia Quadro NVS 140M graphics Advanced Dock (2503)

1. Make sure secondary is enabled..
...when undocked click capture on normal setting in presentation director ...
2.
The nvidia driver and the windows display settings has to enabled as attached as external] and the presentation director have to have the same resolution 1024x768 or whatever..? and the nvidia driver version(Old version 6.14.11.5666 9/27/2007) Rt click device manager display .. properties look at driver. If 5666
(New version 6.14.11.7471 3/20/08 )(This driver also fixes Dual Monitor Display issue with Docking Stations)
Download updated driver from lenovo.(7471 )3/20/08
Then disable desktop manager
Apply the following changes:
1. Right Click on Desktop-Select Nview Properties:
Disable click ok.
Open Nvidia control
Right Click on Desktop and Select Nvidia Control Panel
Click on Change Powermizer Settings
Select - Not manage my power consumption (Disable Powermizer)
Setup in Nvidia Control panel:
Use the following settings and go to profiles and save.
2. Go to Display Properties and use the following settings:
NOTE: Make sure both LCD's are set at the same resolution! Ex 1280x1024 pixels.
The NEC LCD in this example is the Default LCD:
To move mouse from left to right, make sure Display 1 is on the left side in the Display properties.
To undock, Press the Undock button on the Docking station and wait until Laptop goes into Sleep Mode and undocked. Press power button to put into normal mode.

Presentation Director 4.07

I am told that my ThinkPad T60 needs a Presentation Director in order to function the way it was designed to.
Where do I find this Driver (7vua49ww.exe ?)? Lenove does not offer this s/w on their website for some reason.
Has the driver been superceeded by another, like Smart Keys or some such?
Who can tell me what should be used for the Presentation Director?
My T60 has an ATI X1400 chip and it was they who said I needed the PD.
Solved!
Go to Solution.

Hello and welcome,
Here's the version currently listed for your T60: http://support.lenovo.com/us/en/downloads/ds001661
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Presentation Director for T410?

Hi all,
I just got a new T410 Thinkpad for work and it looks like none of the ThinkVantage software is loaded - the OS is Windows XP SP3. I already miss the Presentation Director so I can Function-F7 my way to different monitors at home and work. Is there a way I can just install Presentation Director? Where do I find and download this software?
Thanks in advance for any help you can provide!
Ricky
Solved!
Go to Solution.

RickyS,
Download the ThinkVantage System Update and select all the applications from there. Since you do not want the wifi manager (Access Connections) then you can leave it untick.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

BSOD - latest Presentation Director is suspect - can anyone confirm and advise?

BSOD Issue. After wasting 2 days reinstalling, using R&R etc. it seems to be related to loading profiles in Presentation Director. I went through the trouble of installing debugging tools, and with this helpful article http://www.networkworld.com/news/2005/041105-windows-crash.html?page=1 I made some progress.
But I am stretching the limit of my technical capability. Pasted below is the debugging info. Can someone advise?
Thanks! Joel
ebugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
FAULTING_IP:
win32k!vFixupMetaSpriteList+27
bf9377a3 83670800        and     dword ptr [edi+8],0
TRAP_FRAME: 98a028fc -- (.trap 0xffffffff98a028fc)
ErrCode = 00000002
eax=e1918318 ebx=e45d49c8 ecx=e29af2a0 edx=e1806048 esi=00000000 edi=00000000
eip=bf9377a3 esp=98a02970 ebp=98a02978 iopl=0         nv up ei ng nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000             efl=00010286
win32k!vFixupMetaSpriteList+0x27:
bf9377a3 83670800        and     dword ptr [edi+8],0 ds:0023:00000008=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 2
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x8E
PROCESS_NAME: igfxsrvc.exe
LAST_CONTROL_TRANSFER: from bf938ce9 to bf9377a3
STACK_TEXT:
98a02978 bf938ce9 98a02b8c e19182d8 00000000 win32k!vFixupMetaSpriteList+0x27
98a02b94 bf94c6f1 e19182d8 e1806008 e158b998 win32k!vSpDynamicModeChange+0x259
98a02c00 bf89f247 e19182d8 e1806008 89058de0 win32k!bDynamicModeChange+0x7e3
98a02cdc bf8a1436 00000000 98a02c1c 00000000 win32k!DrvChangeDisplaySettings+0x507
98a02d20 bf8a1329 0012f004 00175e70 00000000 win32k!xxxUserChangeDisplaySettings+0x141
98a02d48 805413fc 0012f004 00175e70 00000000 win32k!NtUserChangeDisplaySettings+0x4a
98a02d48 7c90eb94 0012f004 00175e70 00000000 nt!KiFastCallEntry+0xfc
WARNING: Frame IP not in any known module. Following frames may be wrong.
0012f00c 00000000 00000000 00000000 00000000 0x7c90eb94
STACK_COMMAND: kb
FOLLOWUP_IP:
win32k!vFixupMetaSpriteList+27
bf9377a3 83670800        and     dword ptr [edi+8],0
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: win32k!vFixupMetaSpriteList+27
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: win32k
IMAGE_NAME: win32k.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 48ce5235
FAILURE_BUCKET_ID: 0x8E_win32k!vFixupMetaSpriteList+27
BUCKET_ID: 0x8E_win32k!vFixupMetaSpriteList+27
Followup: MachineOwner
Solved!
Go to Solution.

Hello Joel,
try to uninstall and install prasentation manager.
May be the old version, stored in factory condition to c:\SWTools will help you out?
Install that version, if the new versions is causing problems.
You should also read the installation instructions carefully, because some programs are dependend to others
like Energiemanager or Hotkey-Features.
I would suggest not touch a running system, some updates can mess your system up.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community      Deutsche Community      Comunidad en Español

Presentation Director

I have a T41 and have attached it to a Sony WEGA TV. I can get the the systems linked but the picture is black and white only.
Since I want to review photos on the TV, how do I get color?

Presentation Director is not supported for use with Windows 7, so that is why you are unable to run it.
Win 7 has presentation facilities built-in, so does not require an additional utility.
Cheers,
Bill
I don't work for Lenovo

Presentation Director loses settings when switching between Chinese and English

I've done the "Install files for East Asian languages" and then set the "Language for non-Unicode programs" to "Chinese (PRC)". I do this for our presales people so they can show our prospects that our software is translated (for those that have plants in China and the US). I have the default language set to English. I don't believe it's relevant but I should also mention that this is on a Lenovo T61 with XP-SP3.
When I use the Presentation Director (Fn+F7) most of the screen shows in Chinese. The ones I've added show in English (I have a screen snapshot). I also get Chinese characters in other Lenovo utilities as well.
So I figured I'd just change the "Language for non-Unicode programs" back to English, reboot, and the display would be OK. Not so! The display is in English all right, but NOTHING appears in the window - none of the default settings, none that I added, JUST NOTHING! I have a snapshot of this as well.
I changed the Unicode setting back to Chinese, reboot, and Presentation Director shows all of them still there, some in Chinese and some in English like before.
Does anyone have any ideas how I can get the Presentation Director utility to display properly (in English) and show all the original settings as well? Obviously the settings are stored somewhere since when Chinese is turned on it can display them.
Thanks in advance!
Tim

i was wondering if you could give me a quick overview of how to write characters
Check out this site:
http://www.yale.edu/chinesemac/
http://www.yale.edu/chinesemac/pages/input_methods.html#Apple

Missing schemes in Presentation Director

After installing Presentation Director 4.07, I was shocked to discover all the display schemes missing. I've tried adding new schemes but the program doesn't seem to recognize the notebook LCD display - I'm unable to set the resolution or color depth.
However, I can still project to an external monitor/projector by setting the Fn+F7 option to "Switch the display output from Notebook LCD to external monitor to both (and then repeat)".
I've tried uninstalling and reinstalling but that didn't solve the issue. I've also attempted to update my display drivers, install Lenovo System Interface Driver, and even rolling back to version 4.03, but none of this managed to remedy the problem.
I'm using an X200 running on Windows XP Pro.
Would appreciate any advice I can get. Thanks in advance!

I updated it through TVSU the first time round. When it didn't work, I uninstalled it and installed 4.03 but it didn't function as well. So, I went to the Lenovo support site to download the 4.07 update, thinking that there might be an issue with the update through SU, but to my dismay, that failed as well. And as far as I know, there is one other user in this forum that has faced the same issue after updating to 4.07.
I have exhausted every possible solution that I could have thought of, short of reformatting which is something I'm not contemplating, but nothing seems to be able to resolve the issue. Is there a diagnostics tool, capable of generating an analysis report of some sort, that I could run on my PC so that you can better understand the issue?

Presentation Director Monitor Drop Down Menus Blank

I'm trying to get Presentation Director functioning properly, but there are a couple of screwy things going on:
If I check the properties of the "Capture" profile, it has the resolution of external monitor incorrect. (1920 x 1200 Vs Captured 1024X768). Yes, even after re-capturing.
When I go to edit a profile, the drop-down menus for both the built-in LCD and external monitor for resolution and color quality are blank. Both the standing values and the contents of the drop-downs are blank.
(I'd post a picture, but the work firewall won't let me get to any image hosting options.)
Relevant Info:
W510
nvidia Quadro FX 880M
Newest nvidia drivers
Newest presentation director (4.62)
Got rid of nvidia NView crapware, but the NVidia desktop manager is still present. It actually recognizes the proper resolutions for each display, but doesn't have any good way of quickly switching display setups like PD does.
Any suggestions?

I assumed you were running XP. This video driver persistency feature is implemented on XP as well as Vista/Win7. I don't know why the PD settings are blank.
For your first two scenarios, you should be able to configure that one time manually and then have the video driver automatically remember the settings as you connect and disconnect the display. First, with no monitor connected, configure the TPLCD how you want it. Then connect the monitor and configure both it and the TPLCD how you want them. Then disconnect the monitor and the TPLCD should automatically revert to the settings you specified when the monitor wasn't connected. Then reconnect the monitor and the settings for both monitor and TPLCD should revert to the settings you specified when the monitor was connected previously. Have you tried it? This is a very common configuration scenario that I know many customers are using successfully without the assistance of PD or any other software.
For your last two scenarios, you will just need to experiment to see if the the persistency works or not, like I said it depends on how old the projectors are. If it doesn't work, or if you are frequently connecting to different projectors, then you should be able to use PD for the projector ONLY! don't try to use PD to control the TPLCD.

The black on screen presentation director didn't appear when i press FN + F7

hi everyone,
the black on screen presentation director didn't appear when i press the hotkey FN + F7! presentation director itself works when i start it trought thinkvantage productivitycenter (the white one.
when i press the fn + f7 hotkey...a sound appears but the black menu is nowhere!
i tryed the old and new hotkey drivers aswell the presentation director!
cheers raffa
Message Edited by ict on 12-19-2008 12:25 AM

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
If no success...
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Can't uninstall presentation director rundll as a app error

Can anyone tell me how to manually uninstall presentation director

It is probably because you are not properly closing Firefox. Restarting your system would make sure that Firefox had terminated, but you do not have to do that.
To properly close Firefox on Windows systems, use
:File > Exit or "Firefox:" button > Exit
When you get the message "Firefox is already running" it is too late, and you must force termination of Firefox through the Windows Task Manager before restarting Firefox. Windows 7 has a keyboard shortcut to save you a step "Ctrl+Shift+Esc" then on "Processes" tab, select "firefox.exe" and use the "End Process" button. More thorough would be to right-click on the "firefox.exec" and choose "End Process Tree".
You would find firefox.exe in a Mozilla folder in your program files, but y0u would not want to delete it there, you would need to use the Control Panel which you have already identified and do it from there -- but generally you would not need to do that, and there is nothing in what you have posted to indicate that you should. But if you did do that, then don't let the install start Firefox for you as you would want to use you existing desktop icon or method of starting Firefox, and should decline having Firefox install start Firefox for you. When the install starts then invoke Firefox in your normal manner. This should eliminate problems of creating a new profile rather than using your old profile.

ThinkPad Presentation Director

Similar Messages

Maybe you are looking for