Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date

Hello Experts
I have a client requirement where in they want to bill line items in the sales order ( third party process ) to the end customer in sync with the GRN posting dates happened in the PO
For EG if GRN happened on 1st July 2014 then Billing Date should come in as 31st July 2014 so when they execute VF04 giving from and to dates as 1st july to 31st corresponding sales order can be invoiced
Actual problem is for suppose if i create a sales order in the month of june say 26th basing on the factory calendar setting and invoicing list maintained in the customer master system defaults the billing date to 30th June 2014 , and the same when user runs VF04 from 1st June to 30th June this sales order shows as due and mistakenly end user invoices the customer ( whereas logical GR would have only received in July 1st )
My requirement is similar to below threads but i am unable to find answer how to copy GR Posting date to Billing Date of the sales order line item
use GR Doc date as billing date
3rd party sales process (w/o ship notif) - Billing

Hi Lakshmipathi ji,
As my requirement is to update the billing date at the sales order line item level , As a process user goes in executes VF04
For Ex
Sales Order Created Date is 1st June 2014 then System Defaults Billing Date at line item to 30th June 2014
Now when i do GRN suppose on 1st July 2014 for that line item , system should trigger a code where in check the posting date of the GRN and override the same in the Biiling Date field of the sales order line item
So when VF04 is run for a month All the GRN which are recieved in the month of July are invoiced in July
Please share me your thoughts do we need to check any userexits from MM side which reads the posting date of GRN and then copies in to my third party sales order
Regards
Hiba

Similar Messages

Sales Order line item pricing date

Hi,
When adding a new line item to an existing Sales Order, do NOT allow the pricing date to be > 6 months old. There are open sales orders that can be a year old. They have line items added to them as part of the entire order. The header VBKD-PRSDT is copied in to the new line items. This affects the pricing. The users want the pricing to be current (within the past 6 months).
It is difficult to change the new line item vbkd-prsdt without affecting the header vbkd-prsdt.
Any suggestions?
thanks,
Barb Czerniak

Hello Shiva,
The line item I am looking at has the item category of Z0N1 (used for Stock item), but when I go into copy control using tcode (VTFA) under item level, I don't see this item category as one of the options for selection. Is that normal?
Thanks,
Brijesh

Copying text from CMIR (KNMT) to the Sales Order Line Item

We need to copy text from the CMIR (KNMT) to the Sales Order Line Item with two steps in the access sequence. First to look up by the Ship to Partner Function. If doesn't exist, then look up by Sold to Partner Function. Have setup a new text id (ZPRN), a new access seq (9011). The access seq has one seq =5 for KNMT, ZPRN, all languages and that saves fine. When I set the Partner Function to be SH. I get the following error msg:
"The Language does not come from the partner function AG for MVKE".
Any ideas? This access seq does not reference MVKE. It only references KNMT.
Thanks!

Hi Lisa,
Just stumbled on this post, as I am searching for something similar.
What you are attempting to do isn't possible in config.
This is because as standard Customer Material Info Records are not even considered for ship-to party in the sales order.
They work for sold-to only.
Therefore, this funny error message is SAP's way of saying, "Why are you trying to enter a partner here, because the data is determined for sold to only?"
You can change this with development for other fields (ie, to determine delivery plant, tolerances etc at ship-to) by using
the exit MV45AFZB with the USEREXIT_CUST_MATERIAL_READ form.
However, even if you do this, Text Determination is still sold-to only and still doesn't behave.
I am currently looking myself for a solution for this problem and I will let you know what I find.
Cheers
Chris

Cannot reject/delete sales order line item due to del.date in 2210

Hi all,
not sure if anyone else had this issue already....
Situation :
Sales order line item entered with delivery date in 2210. We would like to correct this order but can't....
every time SAP issues error :
Error determining posting period (info
S008, variant GL, RC 3)
I believe this is because we haven't maintained our calendars yet for 2210 :-D
Question : without us having to load/define the calendar...is there a utility/oss program which we can use to delete the line item, or reject it...or even update the delivery date?
Thanks for your help!

If the system pop ups the error message M2012, then please refer note 10891 or 37532. If the error message number is different, please update the forum.
thanks
G. Lakshmipathi

Field added in Aditional data tab of sales order line item at screen 8459

Hi all,
My problem is .
I have appended one field in VBAP table, given it a name "WBS ELEMENT"
The field is getting displayed in VA23 as well as VA02 Transaction.
when i create sales order with the quotation reference,
the "WBS Element" of line item of quotation should get updated in "WBS Eleement " of sales order line item
This i am doing by triggering user exit.
Problem is:
Once Quotation line item get copied to the sales order line item
and the screen is in front of you with those details,
before saving sales order .
if you go at the sales order line item withou saving the document
The field i have created in the screen 8459 i.e WBS Element ,doesnt get displayed.
how could i retain the field Ihave created on screen 8459
while creating the sales order from quotation before saving that sales order.
Pleas help .

Hi Vikram,
It seems as it has been coded only to save the values into the new field that you have appended to VBAP. But before saving if the user wants to see the field, it is blank. You can try coding in PBO (process before output) of the relevant screen as follows:
1. Get the reference of the quotation. Something like XVBAP-VGBEL will give this number.
2. Get the value of Z field in VBAP by passing this quotation.
3. Copy the above value to the corresponding Z field in XVBAP (or any internal table which holds VBAP data before saving)
Please reward if helpful.
Regards,
Krishna

First Date on sales Order Line item problem

I am having a problem with understanding why am I getting different First Date at the line Item every time I create an order using VA01.
Our lead time for order type OR is set to 3 days in the TVAK table and field VLAUF.
If I go to VA01 and enter a sales order OR, the date should be today's date (04/02/2014) + 3 work days = 04/07/2014 because 04/05/2014 is a Saturday.
Today when I calculate the order it brings in the first date as 04/05/2014 in some cases.
But if I put in the Sales Org in the VA01 screen along with the order type OR, the first date comes in as 04/07/2014.
Can someone please explain it?

"""""Users may or may not enter the sales org when creating an order"""""
You cannot create a sales order without the sales organization.....
Even though you missed system will always redetermine after entering the Sold to party number in sales order from your master data...
Phanikumar

Change delivery date on sales order -- change of Billing date on item

Hi,
We are trying to change a delivery date for a sales order's item, if we do so normally the billing date on that item's billing tab will change automatically also.
Now, for a specific sales order the billing date in the billing tab is not changing.
We compared 2 sales orders .. the same statusses - no blocks - ... and with one it works (changing of the billing date) and with the other it does not work..
Please help !
thanks a lot!

Hi,
Check the following.
If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date.
If you are billing services, the system proposes the date of services rendered. You can change the date manually in the sales document.
If you are using a billing plan to bill a project, the system can propose billing dates for the billing plan on the basis of planned or actual dates in the corresponding milestone.
In a billing plan for a maintenance or rental contract, you can specify rules by which the system determines billing dates on the basis of other dates in the contract.
Regards
Nadarajah Pratheb

Purchase Order Line Item Creation DATE ?

Hi All ,
How can we fine the Line item creation date in PO ? I know EKPO-AEDAT but that is chaged date and its get updated if you chage the line Item after creating it . I need creation date for a perticular Line Item how can we get that ?. thanks in advance , I'll reward if useful.
Thanks ,
Lucky.

Item creation is same as Order date of schedule line
EKET-BEDAT
Thanks
Seshu

Open sales order report with billing date.

Hi,
I want to know if there's an available report for open sales order with billing date field.
Thank you.

Hi,
If your case is "Order-related" Billing,you can use the T.Code "VF04" for this purpose.
One more way is to go for a custom report.
Make a copy of code of the T.Code "VA05n"(Program Name is "SD_SALES_ORDERS_VIEW").
Change the code as per your requirement to display the field "Billing Date" in the report.
Check with your ABAPer if you wish to go for a custom report.
Regards,
Krishna.

Fixed Value date- in Sales Order Line Item

Hi ,
The Filed Fixed Value Date , from where it gets the value.
In My Case One Perticuler Material the Fixed Value Date is comming as Previous year date for todays billing document.
How can avoide this fixed value date for the Sales order at Line item level. Where the Config is done for this.
Thanks & Regards,
Sridhar Sha

Hi Sridhar,
I dont think this feild is coming from some customization, I think user need to enter it manually.
If it comes by default in your case then please check, have you created current order with the refrence of old order?
Because there is some chances that the date iscoming from the refrencing document.
Regards.
MT

Change route in sales order line item bases on incoterms in business data

Hi ,
I have one requirement, in which I have to change the line item route value based on incoterms maintained in business data. I am not able to find correct user exit or enhancement point. I have tried enhancement in VBKD_PRICING but its not working.
Please help me with this. If u need any more details please let me know.
Regards
Sandeep

Hi,
Use USEREXIT_MOVE_FIELD_TO_VBAP in Report MV45AFZZ. This exit is used for changing the values of fields from VBAP table.
USEREXIT_FIELD_MODIFICATION is used for changing the display attributes of screen elements ( hide / unhide fields).
Regards,
DPM

User Exit to make changes in sales order line item data.

Hi All,
I need to know about user exit by whcih I can make changes in sales order line item details --> Account assignment tab --> Sales order no and line item no.
I want to make changes so as to bring the active maintenance contract no and line item no here instead of sales order no and line item no. So whenever ( Va02 or Va03) we go to sales order line item and se the account assignment tab I should see the contract no there.
Just let me know the USER EXIT to do the above changes.
Points will be awarded.
Regards,
Satish.

Hi,
Please have a look at the following user exits...
1. user exit_ save_document
2. user exit_save_document_prepare
Regards
sankar

Splitting sales ord line items to diff deliveries based on sched ln date

Hi,
We are trying to split sales order line items to different deliveries based on the schedule line date. I have copied routine FV50C001( vofm -> data transfer -> deliveries -> routine 1)into a custom routine and added the schedule line date xvbep-edatu to the split criteria likp-zukrl. However the split does not work as expected. Does anyone have any ideas ?
Regards.

Hi Aravind,
u said u ve copied the routine into a customised one..but did u chk whether ur customised routine is getting called from the transcation or not?? the routine has to be assigned in config so tbat it is triggered appropriately.. try putting a BP in ur routine n doin the transaction...
Regards

Delivary Date in PR/PO from Sales Order

Dear All,
I am linking my WBS to SD line item in Order to get the revenue.
I am attaching material to an internal activity in above WBS by attaching FG item which same as that of sales Order line item and then exploding Bill of Material for same.
During attaching FG item before exploding Bill of Material, The requirement date in Component Overview tab is taking current date. I want this date to same as Delivery Date mentioned in Sales Order for that particular FG item.
Let me know how I can do it??
Thanks and Regards,
Atul R. Rajmane

Hi Atul,
I feel this phenomenon is explained in Availability check for PS.
For your requirement go to
Go to SPRO->Project System->Material->Availability check-> Define Checking control
See checkbox "Check material availability when saving order (network)"
It says
   1. Defines per plant, order type and business transaction whether an automatic material availability
       check is to take place when an order (network) is saved.
   2. An automatic material availability check is called up when an order (network) is saved, if the
       following changes have been made to components
        Changes to fields: Requirements date, requirements quantity, unit of measure, material number,
        plant, storage location, batch, bulk material indicator, final issue indicator, lead-time offset,lead-
        time offset for operation, time unit, indicator quantity is fixed
Regards
Tushar

What is table name in SAP R/3 for PM order line item data

Hello,
I am extracting data for PM module and Interested in PM order line item data. Table AUFK is for PM order header master data.
Is there any other table for PM order line item master data?
Thanks,
Ishak

Hi Ishak,
The item table is AUFP.
Thanks.

Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date

Similar Messages

Maybe you are looking for