Third Party Order Billing Date

Dear Group,
Can someone assist me on the issue i am having on Third Party Orders. I have my system set up for Billing Relevenace = B (order related) so that i can create the billing document based onthe goods receipt. We are doing goods reciept with inbound delivery.
What i need to know is how can i have billing date updated? In the initial sales order the billing date is getting set based on the requested delivery date. If the goods are shipped early the billing document is not coming up on the billing due list till the billing date on the sales order and thus will not be billed until the original bill date.
How are others dealing with this issue?
Another question, if we want to pass freight charges on to customer invoice how can we do that based on the inbound delivery? I am adding freight to header delivery docuement for standard deliveries, but not able to get pricing procedure for inbound deliveris.
Thanks in advance.

Why would you do an inbound delivery and goods receipt on a 3rd party order? The point of 3rd party order is so you don't have to bring the inventory into the distribution center and process it in and out. Your billing should be based on the statistical goods receipt on the purchase order, which is when the factory should deliver the goods to the customer.

Similar Messages

Third Party process - billing date change in Sales order / Customer Invoice

Dear Friends,
In Third Party Sales Process , as we are aware billing is order related billing and it will become due only after vendor invoice is received.
               My situation is in the original sales order billing date is eg: 01.02.2009 . The subsequent vendor invoice ( Invoice receipt done based on PR --> and PO) has a later date eg: 05.02.2009 .
This means that the customer biling can be done only after this date.
How the system behaves in this case wrt to the billing date ( 01/02/2009) of the original sales order.
Regards
Mahesh
Edited by: Mahesh sap on Feb 4, 2009 8:55 AM

Hi all ,
         Thanx all for your responses . But my case is a bit peculiar . Here the vendor invoice is coming by IDoc through EDI . When EDI flow is confirmed, the billing date is pushed ahead. As per billing calendar in CMR the customer can be invoiced only on the last date of the month.
As a result if the original billing date in the sales order is Feb end, when vendor invoice received through EDI , the billing date is shifting to march end .
Is it because the date of vendor invoice is causing this? Obviously the customer billing date falls only after vendor invoice date.
Regards
Mahesh

Third party Order billing

How can we stop the billing of the SP unless and untill the LIV has been done for po.
regards,
A S

Its std process of third party sales-
where w/o LIV, you cant create billing wrt: third party sales order.
This is controlled through Billing relevance -"F" in Item Category :TAS which is triggered in 3rd party sales order.
You need not do anything spl in Customizing-
You can try out for your confirmation-
Create 3rd party sales order - after MIGO, then Create billing , system will not allow you to create. Because LIV has not done for this PO.

Billing in Third party order process

Hi,
In the last stage of TPO Process we need to do billing.kINDLY inform what is the reference document when we want to do billing for a third party order process in VF01, Is it sales order?

Hi,
In the Third Party processing,
You refer the Sales order for creating the Billing document to the end customer
In the Item category level of the Third party, one field which control the Billing relevance
If you check the BILLING RELEVANCE for TAS item category, it is F which says, the billing will be based on the MIRO ( vendor invoice)
In general for Third Party, Vendor will directly send material/Goods to the customer and that notification will be sent to the company.
If say, out of 10 PO items, Vendor has send only 5 quantity to the customer and we have to bill the customer for only 5 quantities so once the billing is generated it will refer to the invoice quantity of the MIRO
Hope it is clear,
regards,
santosh

Tax issue in third party order related intercompany billing

Hi,
I have one isseu related to tax determination in third party order related billing document.
Ordering sales organization : Germany
Delivering sales organization: France
In billing document the Delivering country: FR (France)
Receiving Country: DE (Germany)
The tax condtion type: MWAS, Application of that condition type: TX.
Sytem is picking the A1 tax code from country FR and through tax procedure TAXEUR.
But the actually client requirement is system should pick upt he tax code from country DE (Germany). I.e., system need to pick up from receiving country.
I tried through SD tax condition records, it is not working.
I maintained the tax rate through VK11, like
Departure country (FR) - Destination country (DE) - Cust.taxclassi - material tax classi - Tax code (XT), the XT is belongs to France, When i maintained this system is not picking the tax amount from FTXP.
Please let me to come out from this issue.
Regards
Lakshmikanth

Thanks to all

How to stop Third Party Order PR creation in Data Migration

Dear All,
We are having an issue with Purchase Requisition's which are getting created automatically when Third party sales Orders Transaction data is uploaded into the new client. The Third Party Orders already have PR's from MM side in Database. Kindly guide me a known practice to stop this Redundancy.
Regards
VK

Dear All,
We are having an issue with Purchase Requisition's which are getting created automatically when Third party sales Orders Transaction data is uploaded into the new client. The Third Party Orders already have PR's from MM side in Database. Kindly guide me a known practice to stop this Redundancy.
Regards
In the query, I think the above underlined sentence might gave you a different perception. what i mean is in the source database i.e in The table EBAN we have PR's for the Third party Orders. its my bad if it made you misread.
Regards

Third-Party Order Processing delivery date

Hello everybody
I use Third-Party Order Processing for modeling the delivery by the vendor to the customer.
The PR is automatically generated from the sales order. In the sales order, in the schedule lines tab, the system creates two lines :
- 1 line with the date desirated by the customer with a quantity of 0 confirmed
- 1 line with the date calculated with the delivery time (3 weeks) of the vendor master, with the total quantity
When I saved the sale order, the PR generated has only one schedule line with the total quantity with the delivery date desired by the customer. Normally I should have the delivery date of the vendor (today + 3 weeks).
Is it normal ? Do I miss some customizing?
Thanks for your replies,
NP

Its normal.
Delivery days will be honored based on PO delivery details.
3 weeks buffer which you might be getting b'coz of
- charateristics in Planned Deliv. Time or Baseline Lead Time maintained in Materials MRP2 tab .
- avalibility check control maintained
Regards
JP

Order Related Intercompany Billing - Third Party Order

Dear all,
I have configured intercompany billing that is based on the delivery and i have done that successfully, then I tried the third party process but after billing the third party order then the intercompany billing doesn't show up in the vf04, I have searched the SAP Notes especially SAP Notes 63459 but I really haven't got the clue how to do that clearly, if somebody can help me how to configure the intercompany billing for my requirement. I'm using SAP 5.0. I believe something missing in the copying control between sales document and billing document and also for the output type.Please help me very urgent.

hi,
Customizing settings are reported in notes 338922, 109254 and 308989.
During delivery creation the LIKP fields VKOIV/VTWIV/SPAIV/FKAIV/PIOIV/FKDIV/KUNIV must be filled in program FV50XFLK_LIKP_FUELLEN_IV_UML. If you checkt this table and not all of these fields are filled, you have the wrong the customizing. If the error is in your pruduction there is a report with which you can correct the relevant deliveries (of course after correcting your customizing): see note 176476.
Balazs

Order related billing for third party. Third party order..

Hi
While we are running batch job for billing system is throwing below error.
Order related billing for third party. Third party order..

Dear Nortel,
Can you Please check whether, during the item category configuration for TAS (T. Code: VOV7); you have marked relevant for billing indicator as F?
Also, maintained the copy control (T. Code: VTFA) between OR => IVA (for TAS) as follows:
Copying requirement = '013',
Invoiced quantity = 'F', (*)
Quantity/value = '+',
Pricing type = 'G'.
Best Regards,
Amit
Note: I would recommend you to Please go-through following document in full, atleast fo once. This will definitely help you to review your settings for Third Party Order Process Customization.
[Third Party Process|http://yasosap.wordpress.com/2008/10/22/third-party-scenario/]

Reg Third party order processing.

Hi Gurus,
Please help me on the following questions.
1. In third party order processing how costing is updated?
2. How automatic purchase requisition will be generated in third party order processing?
3. Explain about Third party returns process step wise?
Thanks in advance,msi.
Regards,
Vamsi P

HI vamsi
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and,   therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing      *--
In Details:----
SD - 3rd party sales order Create Sales Order
VA01
      Order Type
      Sales org, distr chnl, div
      Enter
      Sold to
      PO #
      Material
      Quantity
      Enter
      Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
      Order Number
      Goto Item Overview
      Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
      Key in the PR number
      Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
      Key in the PR number
      Toggle the "Assigned Purchase Requisition"
      Execute
      Check the box next to the material
      Assign Automatically button
      Click on "Assignments" button
      Click on "Process assignment"
      The "Process Assignment Create PO" box , enter
      Drag the PR and drop in the shopping basket
      Save
SD - 3rd party sales order Receive Goods
MIGO_GR
      PO Number
      DN Number
      Batch tab , click on classification
      Serial Numbers tab
      Date of Production
      Flag Item OK
      Check, just in case
      Post
      Save
SD - 3rd party sales order Create Invoice
MIRO
      Invoice Date
      Look for the PO , state the vendor and the Material
      Check the box
      Clilck on "Copy"
      Purchase Order Number (bottom half of the screen)
      Amount
      State the baseline date
      Simulate & Post
      Invoice Number
      *Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
      In the order screen , go to the menu Sales Document , select "Deliver"
      Go to "picking" tab
      State the qty and save
SD - 3rd party sales order Create a billing document
VF01
      Ensure that the delivery document is correct in the
      Enter
      Go to edit -> Log
      Save
reward if helpful.
Regards,
Prashant

Cutomizing of Third Party Order

Hi All,
Can any help me in the process of customizing of Third Party Orders in SD and MM.
Regards

hi
in third party processing the material should have item category group as "BANS" and the item category should be "TAS" which results in schedule line category "CS" which should have "NB" as document type.
first create a vendor with "XK01"
should have maontained purchase info record "ME01"
should have maintained source list "ME11"
now create a sales order using VA01 which will create the purchase requissition automatically as soon as you save the order.
now goto VA02 and schedule lines data make a note of purchase requisition number and now create a purcjhase order with ref to PR
goto ME57 or ME58 create a purchase order
goto MIGO for goods recipt
goto MIRO for invoice receipt
now do VF01 to your customer
http://help.sap.com/saphelp_46c/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
1. Create Vendor XK01
2. Create Material – Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
with regards to auto PO, tick the item category control at VOV7 for the field create automatic PO, and at schedule line category mention the material account assignment, maintain Purchase Order type, MM item category.

What are the key questions for third party order process?

hi all,
what type of questions can i receive for third party order process?
pls.. do the needful
thanks to all.

Hi arun,
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and,   therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
      Order Type
      Sales org, distr chnl, div
      Enter
      Sold to
      PO #
      Material
      Quantity
      Enter
      Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
      Order Number
      Goto Item Overview
      Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
      Key in the PR number
      Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
      Key in the PR number
      Toggle the "Assigned Purchase Requisition"
      Execute
      Check the box next to the material
      Assign Automatically button
      Click on "Assignments" button
      Click on "Process assignment"
      The "Process Assignment Create PO" box , enter
      Drag the PR and drop in the shopping basket
      Save
SD - 3rd party sales order Receive Goods
MIGO_GR
      PO Number
      DN Number
      Batch tab , click on classification
      Serial Numbers tab
      Date of Production
      Flag Item OK
      Check, just in case
      Post
      Save
SD - 3rd party sales order Create Invoice
MIRO
      Invoice Date
      Look for the PO , state the vendor and the Material
      Check the box
      Clilck on "Copy"
      Purchase Order Number (bottom half of the screen)
      Amount
      State the baseline date
      Simulate & Post
      Invoice Number
      *Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
      In the order screen , go to the menu Sales Document , select "Deliver"
      Go to "picking" tab
      State the qty and save
SD - 3rd party sales order Create a billing document
VF01
      Ensure that the delivery document is correct in the
      Enter
      Go to edit -> Log
      Save
Pl. be clear on this process.
Also understand how migo and miro are handled.
The item categories used.
How the company knows of the shipment of goods to the customer.
How returns are handled.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

Procurement cycle in third party order and stock transport order.

please provide me in steps the procurement cycle in third party order and stock transport order.

Hi,
STO Process: -
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:VL02N
13. Billing:VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)
Third Party Process Flow: -
1) MM01 - General Item category Group should be BANS in basic view of material master.
2) VA01 - Creation of sales order with VA01 transaction in SD module
3) When sales order is created system automatically creates a PR for the material with item category as "S"--> Third Party Item
4) ME21N - Directly PO with item category as "S" and delivery address as customer address
5) MIGO - Statistical GR by MM ( When it is made goods are received and delivered)
6) MIRO - Invoice by MM for vendor
7) VF01 - Billing by SD on Customers

How to code document flow for third party order

Hi, I need to extract data from VBKD, but the creteria is document has been completed. as in third party order, it will only has sales order, purchase order no, invoice no. how to do ?
thanks a lot! kitty

Kitty,
Look at the status of the document in the table VBUK. It should give you all kinds of status - Confirmation status, Delivery status, Total goods movement status, Billing status.
Also if you want the status at the item level you can look at the table VBUP.
regards,
Ravi

Account posting keys involves for process of third party order

hi
pls tell me the process of third party order and whos account stock will be debited and tell me the account posting keys involves in this process and how it operates
regards
Ram
Edited by: Ian Wong on Aug 13, 2008 7:06 PM

THIRD PARTY SCENARIO
In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
The processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally, can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing
If a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
You process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Goods receipt will be posted when ever the vendor ships the goods to our customer.
We will do this transaction in SAP using MIGO.
Invoice receipt is done when the Vendor sends us the invoice.. ( I.e Billing ).
It can be done using MIRO.
THe above two steps are standard and manual. There are many other ways that the actual process can happen. If the client follows EDI standards then the Goods receipt and Invoice receipt can be done through IDOCs automatically.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Click on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1) After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always following a third party process for a material then you have to create the material using item category group BANS.
The procurement type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurement ( in house manufacturing and external procurement).
Step 2)
the item category in the order should be manually changed as TAS.
For that you need to configure the item category determination
Order type + item cat Group + Usage + High level = Item cat + Manual item cat
OR + NORM + + = TAN + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevant for billing indicator as F
step 4)
The schedule line category for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requisition order immediately after the creation of the sales order and the PO to vendor is created against this purchase requisition.
Award if Helpful,
Regards
Priyanka.P

Third Party Order Billing Date

Similar Messages

Maybe you are looking for