Third-party order processing issue
Dear,
In the Third-party order processing,i have finished SO-PR--PO successfully.
But when i Posted Invoice Receipt for the Purchase Order using T-CODE:MIRO after finishing Posting the Goods Receipt,it could't work.
It showed the message'Invoice document still contains messages'.
I can't find the problem.
Buy the way it is just in the IDES system,and the data is the std.
How can i resolve it ?
TKS!
hi,
When doing Miro , There is Tab on top named Messages. Click on it and assigned to your output type and enter communication method.
You ll be able to complete your MIRO.
Revert if not resolved
Regards
Amit Gupta
Similar Messages
-
Third party order process- tolerances
Hi
our client is facing a problem.
Normally a SO will be issued and then the PO is created with ref. to
SO (and with same quantity). GR and IR-L will be booked, then SO will appear
in billing due list and customer
invoice will be created.
But now If PO quantity and GR quantity are not identical, SO is not appearing in billing due
list. do we set up any tolerances for these in custozmizing.
what would be the probable reason for this
can any one please throw some light on this.
Regards
GPHi GP,
Check the billing relevant of Item category used in Sales order item . This should tell you what is happeneing in your scenario.
If PO qty and GR qty missmatch occurs , MM config has to be checked to see if any tolerance has been set.
If SO is not appearing for billing , then you need to check is SO dependent on your GR or IV for billing.
Assuming it as TAS item category and BANS item category group and third party ordering process.
Billing Relevance:
F Order-related billing doc. - status according to invoice qty ( Bill after IV done with IV qty)
G Order-related billing of the delivery quantity ( Bill after GR with GR Qty)
Thanks,
Sudhi -
Reg Third party order processing.
Hi Gurus,
Please help me on the following questions.
1. In third party order processing how costing is updated?
2. How automatic purchase requisition will be generated in third party order processing?
3. Explain about Third party returns process step wise?
Thanks in advance,msi.
Regards,
Vamsi PHI vamsi
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
In Details:----
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
reward if helpful.
Regards,
Prashant -
Third party order processing in Thailand
Hi,
does anyone know that for third party order processing in Thailand, where goods are shipped directly from the vendor to the customer, is it a legal requirement for Thailand to keep track of the in and out movement of the goods in SAP although the goods did not actually come in to the company before going to customer?
If that's the case, how can we handle this in the SAP system? Do we need to do goods receipt and then goods issue out from the inventory to record all the movement for the direct shipment?
please can anyone shed any lights on the above.
Thank you.
KTHi,
the third party process is as fillows:
1. Item category is TAS and schedule line should be CS
2. MM01 general item category group is BANS
3. item category determination should be in T_184 table ORBANSNIL+NIL=TAS
4. schedule line detrnination should be TAS+NIl=CS
5. process OR (VA01) and get the purchase requisition number from VA02
6. wrt PR create purchase order.
7. wrt PO verndor supplies stock directly to ur customer
8. vertually u do GR in MIGO, that goes to directly stock consumption because ur accounts have to be updated to that extent.(u dont do delivery and PGI, u receive GR that goes to consumption stock dierectly)
9. Vendor message comes to u as goods supplied that u make settings PO item views
10. basing on that you send the F2 to ur customer in VF01
10. vendor sends invoice to you.
hope this will hilp u
regards,
sk -
What are the key questions for third party order process?
hi all,
what type of questions can i receive for third party order process?
pls.. do the needful
thanks to all.Hi arun,
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Pl. be clear on this process.
Also understand how migo and miro are handled.
The item categories used.
How the company knows of the shipment of goods to the customer.
How returns are handled.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore -
User Exit for third party order processes.Missing in ECC 6.
Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Could anyone please let me know how I can resolve this issue as I need this User exit for my requirement. Has SAP provided any enhancement spots for this?
I tried to search the enhancement spots and OSS notes but couldnu2019t get any useful information.
Please advice.
Thanks,
Ameeshachanged our requirement
-
Re : Third-Party Order Processing for Subcontracting ( Enhancement Pack 5)
Hi,
In Third-Party Order Processing for subcontracting - Purchase orders for products that are finished by a subcontractor and sent straight to the end customer. PR created in Sales system are processed further in this scenario where you direct your SC Vendor to send the material to your customer.
Although its a standard third party scenario with sub contracting job involved in it.
There is not much information we have in SAP help. This is ECC6 Enhancement pack 5 feature.
If any one has worked on this, I need a process flow to understand this process.
Response is apprecited,
Regards,
Dipak
Edited by: Dipak Kumar on Apr 13, 2011 6:43 AM
Any idea is appreciated?Hi,
Here you can treat this two procedures are diffrent
For Contractor
Create P.O >> send semifinish goods to vendor
For sales Point
Sales order >> PR >> PO >> Vendor invoice reciept >> Customer invoice Issue wrt order. -
Billing in Third party order process
Hi,
In the last stage of TPO Process we need to do billing.kINDLY inform what is the reference document when we want to do billing for a third party order process in VF01, Is it sales order?Hi,
In the Third Party processing,
You refer the Sales order for creating the Billing document to the end customer
In the Item category level of the Third party, one field which control the Billing relevance
If you check the BILLING RELEVANCE for TAS item category, it is F which says, the billing will be based on the MIRO ( vendor invoice)
In general for Third Party, Vendor will directly send material/Goods to the customer and that notification will be sent to the company.
If say, out of 10 PO items, Vendor has send only 5 quantity to the customer and we have to bill the customer for only 5 quantities so once the billing is generated it will refer to the invoice quantity of the MIRO
Hope it is clear,
regards,
santosh -
Third Party Order processing in case of multiple vendors
Hi,
With the third party order processing; purchase requisition gets created automatically based on the scheduling item category. This process works fine when there is only one vendor. In case if we have multiple vendors for the same product; purchase requisition gets created with out any vendor reference. These orders needs manual intervention to assign the source of supply.
In stead of this; we would like to automate the process of the selecting the vendor automatically? Is there any by means? Currently we do populate the corresponding vendor partner function in the sales order item level. Can this be used as reference vendor during purchase requisition creation process? Is there any configuration or customitization?
Have any one come across this?
Thanks for the answer..
Regards,
NagarjunaThere's a default vendor in source lists.
-
Third Party order processing- PR creation
Hi
In Third Party Order processing , system creates single Purchase requisition for the all line items in the Sales order. Our requirement is to create individual PR for each line item in the sales order. For Example , if the sales order is having two lines items (10 and 20) with item category TAS, system should create two purchase requisition against line 10 and 20. Is there any customization available to control this ? if not how can we achieve this functionality.
Thanks in advance for your immediate response.
With regards,
Joseph Anand BJoseph,
1. First you need to maintain ZTA1 and ZTA2 two item categories.( Replica of TAS)
2. Proceed with Item category determination for ZTA1 and Keep ZTA2 as Manual Item Category both the item category should have same details.
3. Proceed Creating Schedule line categories ZTA1 + MRP type = C1 (Replica of CS - LEG)
Similarly create another ZTA2 + MRP type = C2 (Replica of CS - LEG)
Now when you raise a third party order enter the material ( 2 line items) and price and press enter. The first line item will have ZTA1 and second line item also will have ZTA1 change it manually to ZTA2.
save the document.
Try this i hope it should work
Note: But like one of our friend likely pointed out what if it were to be more than 2 items.... just check it out. Does it sound perfect....
Regards
Sathya -
Delivery address of PO in third-party order processing
Dear sir,
The delivery address in PR&PO of third-party order processing will auto take the 'Ship-to-party' from the SO, but in my company due to special process we want the delivery address default in 'Sold-to-party' of SO.
Can someone tell me how to cinfigure that or enhancement exit should be used?
thanks!
JosephThere's a default vendor in source lists.
-
HI SD Gurus,
I would like to know the process (mainly the list of documents), how is followed for Third party order processing in Indian scenerio.
When the vendor is supplying the goods to the customer, what are all the documents needs to be carried along with the consignment?
When the Business raising Invoice to customer, what are all the documents needs to be sent to customer?
In particularly, who will pay excise duty and sales tax etc,.
Expecting your valuable response.
In case, if you need more clarity, please feel free to ask me...
Regards,
ManiHi Swamy & SD Gurus,
Let me explain more on my question.
In Third party order processing, Vendor is supplying the goods to Customer on behalf of Business. Here is my doubts :-
1) What are all the documents to be sent to Customer by the Vendor?
2) Who will pay the excise duty (Whether the Vendor or Business)? (as per my knowledge, Excise duty is on Manufacuruing)
3) Who will pay the Sales Tax? (to my knowledge Sales Tax is only at the time of Sales) - In this case, whether the sales tax is applicable or not
When the Business sends the Invocie to cutomer -
1) What are all the document will be sent to customer by Business?
2) When Business raises the Invoice to customer, how is Pricing , Excise duty, Sales Tax are calculated?
Here I don't like to know the setting in SAP (however this is later stage), at least, would like to know the business process...
Hope you understand the questions......
Thank you
Regards,
Mani -
Third-Party Order Processing delivery date
Hello everybody
I use Third-Party Order Processing for modeling the delivery by the vendor to the customer.
The PR is automatically generated from the sales order. In the sales order, in the schedule lines tab, the system creates two lines :
- 1 line with the date desirated by the customer with a quantity of 0 confirmed
- 1 line with the date calculated with the delivery time (3 weeks) of the vendor master, with the total quantity
When I saved the sale order, the PR generated has only one schedule line with the total quantity with the delivery date desired by the customer. Normally I should have the delivery date of the vendor (today + 3 weeks).
Is it normal ? Do I miss some customizing?
Thanks for your replies,
NPIts normal.
Delivery days will be honored based on PO delivery details.
3 weeks buffer which you might be getting b'coz of
- charateristics in Planned Deliv. Time or Baseline Lead Time maintained in Materials MRP2 tab .
- avalibility check control maintained
Regards
JP -
Third Party Order Processing in CRM
Hi,
I need to create an item category in CRM which enables me to activate third-party order processing in ECC. So the process should be:
- Create sales order in CRM, choose item category "TAS"
- Save sales order
- Order triggers purchase req. in ECC (or sales order with item cat. TAS)
I read sap.help. where it says we need to use SCM etc. for this process. Actually we only have ECC connected. Is it still possible like that?
Rgs
AnkeHi Anke,
1.Create a ztrans type and item category by copying TA and TAS in CRM.Maintain the same document type and item category in ECC.
2.select the "Create PO Automatic" option in the ECC item category definition.
3.Assing the Purchase order document type to Schedulines and assign schedule line to Item category.
Hope it helps....
Regards,
S Reddy -
Third party order processing with Scheduling agreements
Gurus,
I have a situation here, i am working with a automobile industry and customer sends us EDI 830's (FSD and JIT schedules). we are using scheduling agreements (Doc type - LZ) to process those schedules. I have couple of parts that we dont manufacture and we ask our vendors to ship it direct to customer. i am trying to set up a third party order processing for this sceanario but system is giving me message that i cant use scheduling agreements. i tested with sales order and it worked fine with that. Is there any way to figure out solution with scheduling agreements. Any help will be appriciated.
AmanHi Aman,
Scheduling agreements with delivery schedules are not supporte in third-party order processing.
Baskar
Maybe you are looking for
-
Can a thief take out the sim card and use phone like new?
I recently left my phone in a public bathroom and when I went back it was gone. So I believe someone has taken it and has turned it off. I am using Find my iPhone but the person has not turned my phone on in 3 days. I'd like to know, what could he/sh
-
Using Next Button To Go From Track To Track?
I'm working on a concert DVD. The show has two sets. The content was edited elsewhere and I'm doing the authoring only. They send the first and second sets as two separate files MPEG files (with matching audio). No biggie for my authoring accept this
-
getting an error, "unable to connect to server" when trying to access yahoo email account. I did not change my password, but now everytime I try to access my email from my IPhone 4s, I get the error.
-
Declaring the var in the constructer
How can someone do this without declaring the photos var before the constructer as a field? package org.robotlegs.demos.imagegallery.models.vo import mx.collections.ArrayCollection; [Bindable] public class Gallery public var photo
-
Return multiple variables from function via DBLINK
hey, I've created a function for use by another database through a dblink. I created the function to return a ref cursor but have since found out that this is not allowed so i'm looking for alternatives? Assuming I want to keep the function on our da