Third party returns from customer to vendor (Urgent)

Hi,
We have an urgent requirement regarding an issue with third party returns from customer.
The scenario required is as follows :
When the customer returns the goods in Third party proccess the goods should be directly returned to the vendor instead of receiving into our plant .
How can we map this bussiness proccess?
Currently the returns are handled as per the standard SAP proccess ie.,
Customer returns the goods> Return order is created>Return delivery created (PGR)>Credit memo created.
In this case we are receiving goods into our plant .

Hi Shrikant
1. If delivery of goods is the only issue then you can ask customer to make invoice with Invoice to your company address and Delivery address as the vendor address. Practically it is possible.
2. Then you can make corresponding entries in SAP and regularise it.
Thnx
Nilesh

Similar Messages

Return to depot - original order from third party location to customer

Hi,
A return order has been configured for materials which have originally gone from third party location to customer location. During return process however the material is coming back to the depot, not the third party location. Now while trying to create an excise invoice after posting goods issue, the material is not showing in the list of excisable commodities. Please suggest a solution.
Thanks,
Kasturi

There is no concept called third party returns in standard SAP. Check this link where the same topic was discussed
[Re: Return Of goods in Third Party Process|Re: Return Of goods in Third Party Process]
thanks
G. Lakshmipathi

Customer invoice for Third Party return and Credit Invoice???

Hi All,
Business needs third party return with vendor & customer Credit invoice.
I am fully aware that standard SAP does not support this scenario.
I am looking any other best way to implement this scenario in sap, if any body has worked on this.. I am thinking in below line:
Changing VBUK-FKSAK and VBUP-FKSAA by using program once vendor invoice generated... but not sure its impact in other area. one impact I can see its making cost negative in invoice.
Another option tried is to delink vendor & credit invoice by using 'B' Billing relevance, This is generating zero invoice if billing block is removed & PO has been created..
Please advice
Regards

Dear Neeraj L,
Can you explain the process more in detail?
Because,in 3rd party - returns will occur only after Customer rejects the goods from the Vendor. then goods has to be returned from teh Customer , but not from the Vendor.
You might thought of - Returns from Customer & then return to Vendor- which is std process? Doesnt it fit your requirement?
But in this case, there is no sales order link to Vendor returns.
Regards,
Reazuddin MD

How to raise customer invoice in case of third party sale from PS

Dear All,
In case of third party sale from project systems module, PR is raised which is further converted to PO and once the material reaches at client place GRN is done.Based upon the GRN the actual cost is booked to the project.How should I raise the customer invoice against the materials received by the customer?
I went through the Forum and based upon the threads there, I came to know that one option is to create sales order for the same items and do order based billings.But for this I have to enter the same materials items again in the Sales order which is nothing but duplicacy of data.
Is there any alternative to this? Or some other way by which the PO line items be copied to sales order so that I can save time while creating sales order.
Regards,
B P Singh

Hi Virendra,
Business scenario is like this.
I have created project and activities.Have assigned materials as 3rd party sale in NWA. I have released the project.PR are getting followed by PO.On doing the GR the actual costs are getting booked on NWA.
My concern is how to bill the Items(the same material components) which are assigned to activity.
As per your input I need to do Resource Related billing.Thanks for the input.It is no longer required to assign materials in DIP to Carry out RRB.
To carry out RRB do I need to create Sales Order first ? If No then how to do RRB? If Yes I need to create a Sales Order with all the material components which I have assigned at activity level. So I was looking for some alternative so that SO creation becomes less tedious.
Regards,
B P Singh

Third Party Returns

Hi all,
Can anyone explain the third party returns process and step by step configuration in IMG.
its urgent. u can mail me to [email protected]
tks

Third Party Return Process
Please check this extract from the sap library :
If the vendor grants you a credit memo on a quantity or a value basis, you can then send this credit memo directly to your customer.
The billing type Third-party credit memo (G2S) is available for this. The billing type Third-party credit memo works with the item category TASG (third-party credit memo item). The Billing-relevance indicator F is set in Customizing for Sales for this item category. This means that the cost is not created. In Customizing for Sales, the item category TASG is set at item level in copying control for the billing type G2S (copying control sales document by billing document) as the target item category (source: TAS-> Target:> TASG.)
Process Flow
Create a billing documente with billing type Third-party credit memo (for further information, see the section Creating a billing document in the Billing document). Enter the third-party order as a document still to be processed. The quantities are automatically removed from the invoice.
The above is the process for giving a credit memo which can be adapted for return goods.
Regards,
Rajesh Banka
Reward suitable points.
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

THIRD PARTY RETURN SALES

hi friends,
In third party RETURN SALES
what is the business flow???
After returning the goods to vendor, How we create creit note ??
means which reference( OR,PO,RE)???
thanks

Third Party Return Process
Please check this extract from the sap library :
If the vendor grants you a credit memo on a quantity or a value basis, you can then send this credit memo directly to your customer.
The billing type Third-party credit memo (G2S) is available for this. The billing type Third-party credit memo works with the item category TASG (third-party credit memo item). The Billing-relevance indicator F is set in Customizing for Sales for this item category. This means that the cost is not created. In Customizing for Sales, the item category TASG is set at item level in copying control for the billing type G2S (copying control sales document by billing document) as the target item category (source: TAS-> Target:> TASG.)
Process Flow
Create a billing documente with billing type Third-party credit memo (for further information, see the section Creating a billing document in the Billing document). Enter the third-party order as a document still to be processed. The quantities are automatically removed from the invoice.
The above is the process for giving a credit memo which can be adapted for return goods.
Regards,
Rajesh Banka

Hi all.. what is the item category for third party returns

Please also include a brief about third party returns procedure
thanks
adi

Hi,
In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. The standard sales order automatically creates a purchase requisition for the materials to be delivered by the third-party vendor.
In this scenario, the vendor sends a shipping notification. The incoming invoice from the vendor updates the billing quantity, so that the customer-billing document is only possible after entering the invoice from the vendor.
<b>If the customer does not accept</b> the delivered goods from the third party vendor, the customer disposes of the goods. A credit memo is issued to the customer reversing the revenue and cost of goods sold. Then a MM credit memo is created for the third party vendor. A statistical goods receipt reversal is performed for the goods in order to close out the original purchase order. The vendor credit memo may initially be blocked for payment, if previous agreement for this with vendor exists.
And REN would be returns item category. But you can always have your own cutomized item category if there are any special requirments from the business.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

Third party return flow

what should be the return flow of aThird party sales?
Sharmila

As already posted in SDN:
Third Party Return Process
Please check this extract from the sap library :
If the vendor grants you a credit memo on a quantity or a value basis, you can then send this credit memo directly to your customer.
The billing type Third-party credit memo (G2S) is available for this. The billing type Third-party credit memo works with the item category TASG (third-party credit memo item). The Billing-relevance indicator F is set in Customizing for Sales for this item category. This means that the cost is not created. In Customizing for Sales, the item category TASG is set at item level in copying control for the billing type G2S (copying control sales document by billing document) as the target item category (source: TAS-> Target:> TASG.)
Process Flow
Create a billing documente with billing type Third-party credit memo (for further information, see the section Creating a billing document in the Billing document). Enter the third-party order as a document still to be processed. The quantities are automatically removed from the invoice.
The above is the process for giving a credit memo which can be adapted for return goods.

Sending query to third party portal from TREX Search Engine

HI Experts,
we need to implement normal search option in SAP portal.
when we search any thing from portal ,
It has to search in EP & KM and also it has to search
windows sharepoint portal and bring the data back to SAP Portal.
For this purpose one solution is
1) implementing enterpise search,
but my client dont want to go for enterprise search(federated search).
2) The other way
Sending query to third party portal from TREX Search Engine
In this way what i want is ,
how TREX can send query to third party portal SEARCH ENGINE
(in my case share point portal search ENGINE).
There is no problem to search in EP & KM becuse it is default.
To search in Micro soft Share point portal,
TREX should pass the query to share point portal search ENGINE.
Is there any API TO send a query to third party portal like sharepoint?
I searched in SDN and Other sites also but i am not getting exactly what I require.
If any one has ideas or implemented already please guide me.
My client require searching option like this,
we need to provide drop down box in SAP Portal with 3 options like
1) search in Share point portal
2) search in SAP EP & KM
3) Search in both the portals
please provide any code samples in case if you have.
please help me , its urgent
Thanks in advance.
Regards
Bala

Hi Bala,
please check the information on the KM IMS (Index Management Service) in KMC's developer guide. A connection to a 3rd party search is done from KM, then calling TREX and XY in parallel, not serially from TREX.
Here's a paper describing this for an older KM release:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5e514b57-0701-0010-3796-deb3636835fa
Regards, Karsten

Change of Reconciliation Account from Customer to Vendor

Is it possible to change the Recon Account Type from Customer to Vendor if it already has posted entries in it ?
If yes, please advise the procedure.
Thanks
Ravi
9849393564

My requirement is not to change the recon account number in Vendor/Customer master. I want to change the Recon Account type from Customer Type to Vendor Type in the GL Master of the Recon Account.
You may note that I already have posted entries in that Recon Account.
Thanks
Ravi

How to create automatic creation of BP from customer and vendor master data

Hi gurus,
can any one tell how to create automatic creation of BP from customer and vendor master data.
Please give me the steps.
Thanks
Sasikanth.

HI,
Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
rgds,
Srini

Warning, third party software from Lenogo

Hi,
I just wanted to warn others about purchasing third party software from "Lenogo" www.lenogo.com
I saw this company mentioned here on the apple forum, and I then purchased the ipod to mac transfer software so I could transfer my music from my ipod (all paid for, no copyright issues here) back to my computer's itunes after an unsuccessful sync.
The software wouldn't download or install and the company did not reply to any of my emails or support tickets, or provide telephone contact details.
They did not provide support or a 30 day money back guarantee refund, as advertised.
I've been ripped off, basically!
Just wanted to let you guys know so it doesn't happen to you!
Kate.

Hello and Welcome to Apple Discussions.
Thanks for this and bump!
cheers
mrtotes

Write off an account from Customer for Vendor

Hi all!
I need to write off an account from Customer for vendor, because this customer is also Vendor.
How we do?

Dear Tien,
If I understood correctly a Business Partner is both a vendor and a customer for your client and I guess they want to write off the credit and debit with this Business Partners instead of using payments.
This is possible using a manual Journal Entry, however if you have open documents after you should reconcile the documents with the JEs.
However, I do not know if this is allowed in your customer's country. I would suggest to consult the accountant before carrying on.
Kind Regards,
Marcella Rivi
SAP Business One Forums Team

Movement type 453 (Transfer posting to own stock from returns from customer

Hi all,
I have problem in goods movement type 453 (Transfer posting to own stock from returns from customer)
it picking from from profit center from in material master under sales:general/plant tab but we need picking from based on account assignment group in the material maser sales org.2.
Other movement types are picking from based on account assignment group only . for that what i can do please help me on this.
K.Satish

Hi,
In Co controlling are the automatic account assignment is only the default and it on the Priority.
if you think what is picked up from the mm is wrong.
the best way out will be to go with the substitution rule.
based on the movement type use the rule.
hope this is clear , assign points.
With regards
Krishna

Can I know what is the process for us to do Good Return from customer?

Can I know what is the process for us to do Good Return from customer?

hi
this ques need to be posted in sd forum..
to answer this u can use order type RE to create Return order and then u can do the goods receipt..
or u can use the process mentioned in first reply.
regards
CMM

Third party returns from customer to vendor (Urgent)

Similar Messages

Maybe you are looking for