Third Party VST audio plugins  - stereo, multichannel

Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
Another question I have is well I just made a 32-bit version of my plugin for Audition to find it and it works fine when its a stereo 2 input 2 output plugin.
But I have a plugin that is 2 input 4 output and although making it 32-bits Audition will scan and find it, It will always be disabled in the plugin list and I can't find a way to enable the plugin.
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
Any information would be highly appreciated!
Thanks you very much.
Sergio.

sergexte wrote:
Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
This release of Audition is 32-bit only and thus only supports 32-bit VST plug-ins.  You may wish to try your 64-bit VST in Premiere Pro as it is a 64-bit app that also supports third-party VSTs
sergexte wrote:
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
You can have plug-ins with more than 2 outputs, however, we don't support plug-ins with asymmetrical channel configurations.  There's a lot of details that need to be attended to in order to get that to be bulletproof.   So if you had something that was 6 in and 6 out, that should be possible in this version of Audition.

Similar Messages

  • Third party MIDI/Audio driver conflict message!@#@!#@

    I'm getting the "Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers" message.
    I'm running a G5 dual 2 gig, OSX 10.4.8, Logic Pro 7.2.3, Emagic AMT8 and RME DSP9652.
    When I start Logic, it hangs on "checking MIDI drivers" forever, then gives me the conflict message 4 or 5 times, then tells me MIDI services won't be available.
    I have not changed ANYTHING... it's worked fine forever. I removed the EmagicUSBMIDIDriver.plugin from the MIDI drivers folder, tried it with nothing in the folder, and same thing (I had a Yamaha MIDI driver and one from the RME, but I dumped them. It's worked fine with the additional drivers for a long time, so I doubt that's the problem). I reloaded the EmagicUSBMIDIDriver.plugin from the 7.2 installer DVD, same thing.
    Someone mentioned this problem was caused by too many devices drawing current on the USB bus, but I only have a mouse/keyboard, printer, XS Key, and a iLok for Waves on the the USB bus.
    HELP!
    Mitchell

    I have looked in Library/Audio/MIDI Drivers and there is just one file called EmagicUSBMIDIDriver.plugin - can this be causing the problem?
    Nothing on User/YourName/Library/Audio/MIDI Drivers.
    I have found 3 AVID folders on Applications:
    - Avid MetaSync Manager
    - Avid MetaSync Publisher
    - Avid_Uninstallers
    Shall I remove these?
    There is also an empty folder called Digidesign on User/Library/Audio/Plugins
    I have tried it with the M-Audio card connected and selected in Logic, and it doesn't work.

  • Third party AU audio units disappear after archive and install

    hey everybody.
    so after an forced unfortunate archive and install, my third party AU have disappeared from DP and Logic. they run fine in standalone. how can i get them back into logic?

    Move them back from your old archive, or reinstall.
    When you do an archive and install, your old system gets removed and a new fresh system put in place. If you had plugins in the system components directories, obviously they aren't gonna be there on a new fresh system.

  • How ou where install third party vst plug

    Hello,
    does somebody know how or where install third parti vst plug ins?
    thank you

    Dan,
    Did you read my post above yours?
    Logic Pro X does not use VST plugins.. It only uses 64bit Audiounit (AU) plugins..
    and....
    To install most plugins you simply use the installer that came with the plugin... or follow the instructions that came with the plugin..
    Cheers..
    Nigel

  • EXS Freezes when loading third party presets/audio files

    Hello,
    I am using Logic 8 with OS 10.6.8, macbook pro
    The EXS factory presets load fine for me.  I put a preset bank in the EXS preset folder/area and the samples for it on my system drive.  When I choose any preset from there, the EXS freezes trying to load the samples.  It doesnt get even get to one sample.
    I have tried:
    Reinstalling
    Removing the preferences
    Juggling the memory setting the EXS
    Anyone able to shed some light??

    Your EXS24 instruments and samples need to be re-linked, otherwise this delay will happen every time and it will drive you nuts.
    Logic used to have a feature called Project Manager which did this. What happens is this:
    The .exs files (instruments) contain info about where the samples are located. When you get 3rd party stuff, the paths that are written into the .exs files might look like this:
    Fred's huge drive/Samples for products/Section01/Bass samples/  etc etc
    Because your drive doesn't have any of these file paths, Logic scans your whole system to locate the samples.
    The only real option is provided by Redmatica (www.redmatica.com)
    You need ProManager or EXSManager. Either one will re-write all the file paths and sort out this problem. You need to read the instructions for the process to be successful.

  • How do I install third-party VST plug-ins in Logic Pro??

    I am mystified - nowhere in the manual can I find any instructions for installing other plug-ins. Surely it is very simple - but then so am I... Can anyone help?

    You can use a VST/AU converter such as this:
    http://fxpansion.com/index.php?page=5
    Granted, it's not guaranteed, not supported by Apple and not free buuuut, it's worked for me with Ruby Tube, a VST plug that I really couldn't live without.

  • Plugin Third party Dependent jars configuration

    Hi,
    We have developed a scheduled task which has thid party dependent jars (jars for webservice client like axis etc). We put this jars under the lib folder which also contains the plugin jar. When we deploy the plugin with plugin registration utility we get classnotfound exception about the third party jars which we already included in the lib directory. What can be the problem here ? any help is strongly appreciated..
    BR,
    Aliye

    If you include Third party jar inside plugin zip it should not produce error.
    However, For Scheduled task Plugin is not required. You upload your Scheduled Task Jar/Third party jar using UploadJars.sh or place inside Scheduled Task,ThirdParty folder.
    Hope currently you have registered your code as plugin. better remove this plugin using ant script or db. and then put your jars at file system and then upload it using UploadJars.sh. Make sure you run
    PurgCache.sh all afterwards.

  • Third party Audio plugins don't work here

    I'm wondering if someone is able to use third party Audio plugins (like Waves, Sonnox, Sonalksis, etc.) in FCPX. I can't. I have them for Logic and I can see them in FCPX, but if I try to use them I encounter various issues (settings not saved, FCPX crashes, and so on...).
    Only Logic plugs work fine

    There are NUMEROUS of issues with third pty AU's in FCPx. I have reported many of them. Settings not getting stored, crashes etc etc etc...
    Plugs that work perfectly in Logic Pro....
    AU integration in FCPx is highly erratic. Unfortunately.
    You also wanna be VERY careful when using .CAF files in FCPx which have more than two channels of audio. Distortion etc... are bound to happen unless you take appropriate measures and disable channels not pertaining to stereo.

  • How can I get the rest of my third party audio plugins (UAD & Altiverb) to show up in FCPX

    Hello Everyone,
    In FCPX'as audio effects I can see the Logic (included with FCPX) plugins, as well as my own Celemony (Melodyne) & PSP Audioware plugins. However, my UAD plugins and Altiverb are not there. How do I get FCPX to see my other audio plugins that are also currently on my machine?
    Any help appreciated, thank you.
    ~Shea A.J. Comfort

    err = -50 when downloading from store - https://discussions.apple.com/thread/3697501 - delete incomplete downloads from downloads folder as per http://support.apple.com/kb/TS3297
    iTunes Store: "Error (-50)" when downloading purchased content - http://support.apple.com/kb/TS1583

  • Can't find my third party plug-ins in the Audio Effect slot

    I've moved my downloaded plug-ins into Macintosh HD > Library > Audio > Plug-ins, and in a new Finder Window dragged the VST file and Component file into it's respective Logic Pro X files folder(s). I still don't see them in the Audio Units slot for third party plug-ins. Can anyone help me troubleshoot? I'd much appreciate! Thanks.
    -Victor

    Which plugin are you trying to use?
    Is it a 64bit AU Plugin?
    If it isn't then LPX cannot use it....
    If it is.... Does it show up in the AU Manager as validated?
    (LPX menu bar..... Logic Pro X > Preferences > Audio Units Manager)

  • Third party plugins for garageband

    Are there third party plugins that work on garageband other than the Jampacks? I have a ton of VST instruments (reaktor, triangle, kontakt, etc.) that i've used on my windows setup but I want to move everything over to the mac. am i restricted to apple software? am I going to have to use some other sequencing/music production software?
    Thanks,
    Michael

    There are hundreds of plugins that will work in GarageBand, they just have to be Audio Unit plugins.
    There is also an AU wrapper that claims to enable the use of VST, however I have no first hand experience with it.
    --HangTime [Will Compute for Food] B-|>

  • How to use third party plugin with FCP, I'm lost...

    Hello,
    I need informations about how to use plugins with FCP.
    I do edit mostly classical concerts. I'd like to do basic audio post prod, without swaping between Soundtrack and FCP.
    I need two simple things : add reverb (the built in reverb is really bad), and enhancer. So I looked for specialised third party audio plugins, but I couldn't manage to find something that work for me...
    - Do FCP support VST plugins ? How to install them ?
    - I tried a few audio units plugins. It works, but I couldn't get a friendly visual interface, like VST effects racks. Is it possible in FCP ?
    - does anybody know a good reverb plugin with a friendly interface compatible with FCP ?
    Please help, I'm lost !
    Emmanuel

    I need two simple things : add reverb (the built in reverb is really bad), and enhancer.< </div>
    What you NEED is a better recordist at the concert, someone who understands the peculiarities of your specific video deliver plans.
    Soundtrack Pro is right up there with Motion in its impossible-to-understand interface paradigm shift away from industry standard tools. However, if you are in the position of being a sound editor, you must find a tool that works for you. STP might not be the one, certainly isn't for me. You could always try Logic. Yeah, good luck with THAT.
    bogiesan

  • RED Workflow questions with Mac Pro (including third party plugins)

    Hello all,
    I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
    Here is what I’m working with:
    2014 Mac Pro
    -2.7 GHz 12-core intel xeon E5
    -64GB Ram
    -Dual AMD FirePro D700 6GB
    -1TB Flash Storage
    Editing all footage off 96TB Raid 6 mini-sas server (getting about 1100mbs read/write rate according to AJA system test) which is faster than any Thunderbolt/TB2 drive array I have.
    Media I work with is footage from the RED Epic (normally 5K) as well as DSLR footage from the 5d.
    Software:
    -PrPro CC 2014 (8.1)
    -Magic Bullet Looks 2.5.2
    My question(s) pertains to RED post-pro workflow in combination with third party plug-ins and the different approaches to make it more efficient.
    Right now, majority of the clients need a 1080p HD master, and they are generally anywhere from 2-8 minutes (usually). So my sequence settings are as follows:
    Video:
    Editing Mode: RED Cinema
    Size: 1920 x 1080
    Audio: 48Hz
    Video Previews
    Preview File Format: I-Frame Only MPEG
    Codec: MPEG I-Frame
    1920x1080
    Maximum Bit Depth unchecked
    Maximum Render Quality unchecked
    Composite in Linear Color checked
    Export Settings
    H.264
    1920x1080
    VBR 1 pass
    Target Bitrate 12mbs
    Max bitrate 12mbs
    Maximum render quality/depth/previews unchecked
    Issues I have:
    -Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
    -Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
    So my questions are:
    Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
    Would using offline editing help at all?
    Do you place your effects on adjustment layers?
    Is there anyway to improve export settings when using an array of filters?
    Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
    Is there any other tweaks that you would suggest for RED workflow with PrPro?
    Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?

    Hi This Is Ironclad,
    thisisironclad wrote:
    Hello all,
    I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
    The biggest issue is that most people have is that updating OS X causes certain folders to be set to Read Only. See this blog post: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
    thisisironclad wrote:
    Hello all,
    I’ve been searching many forums for the better part of a day trying to get some workflow questions sorted. I’m experiencing (very) slow export times, and mediocre playback for a machine that should be screaming fast.
    Here is what I’m working with:
    2014 Mac Pro
    -2.7 GHz 12-core intel xeon E5
    -64GB Ram
    -Dual AMD FirePro D700 6GB
    -1TB Flash Storage
    It's a nice base system. How about an additional speedy disk for media cache files. You also did not mention which version of OS X you are running.
    thisisironclad wrote:
    Software:
    -Magic Bullet Looks 2.5.2
    The Red Giant website does not indicate that this software is yet updated to work with Premiere Pro CC 2014.1 (8.1). Proceed with caution here.
    thisisironclad wrote:
    Issues I have:
    -Playback is fine at 1/2 or even full, but once effects (especially magic bullet looks) start to go on the clips, it’s very choppy and has difficult playback at 1/4
    I would not use this plug-in until you get the OK from the manufacturer.
    thisisironclad wrote:
    -Export times (especially with magic bullet looks) will take the better part of 1-4 hours for a video that is 3-6 minutes long. This doesn’t seem like it should be the case for a maxed out MacPro
    Again, I suspect your plug-in.
    Keep in mind that exports are largely CPU based but you can make sure that GPU acceleration is enabled for AME at the bottom of the Queue panel.
    thisisironclad wrote:
    So my questions are:
    Do these seem like the right sequence/export settings for mastering at 1080p? If not, what would you suggest?
    It's OK.
    thisisironclad wrote:
    Would using offline editing help at all?
    No need when you should be able to edit natively. Relinking might also be an issue.
    thisisironclad wrote:
    Do you place your effects on adjustment layers?
    That's one way you can do it with the benefit of being more organized.
    thisisironclad wrote:
    Have you stopped using third party plugins for their inefficiency in unreliability and switched to more integrated applications like SpeedGrade?
    I do. Of course, that's a preference.
    thisisironclad wrote:
    Is there any other tweaks that you would suggest for RED workflow with PrPro?
    Try the following:
    Sign out from Creative Cloud, restart Premiere Pro, then sign in
    Update any GPU drivers
    Trash preferences
    Ensure Adobe preference files are set to read/write(Hopefully you checked this out already)
    Delete media cache
    Remove plug-ins
    If you have AMD GPUs, make sure CUDA is not installed
    Repair permissions
    Disconnect any third party hardware
    If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCLYou have AMD GPUs.
    Disable App Nap
    Reboot
    thisisironclad wrote:
    Should I consider switching to FCPX or (besides the iMovie-likeness) does it carry problems of its own?
    I really shouldn't answer that question.
    Hope this helps.
    Thanks,
    Kevin

  • Third party audio gap fill in

    Izotope has released a very excellent looking piece of software: Izotope Rx Complete Audio Restoration. The main feature that got my attention in this software is the ability to fill in missing gaps of audio. As they put it on their site: "remove intermittent noises, corrupted intervals and gaps with Spectral Repair re-synthesis"
    http://www.izotope.com/products/audio/RX/
    I am a diehard audition user and the only feature that this software from Izotope has that audition doesn't is the above mentioned. This software is about $350.00 and for the advanced version $1199.00 USA. I don't want to pay that much for only one feature that interests me.
    I was wondering if anybody knows of some third party plugin that could get similar results. I am willing to pay as long as it is not $350.00 like the Izotope software!
    I work with a lot of old files that are filled with gaps. This feature would be very helpful to me.
    Thank you!

    ryclark, yes, if I remember correctly, I used mix-paste with a very short crossfade setting in the mix-paste settings.
    And I tried several other approaches, even with multitrack view, what follows is probably pretty over-the-top. :)
    I once had a drop-out in the chorus of a song that wasn't just a gap, but the audio after the gap was shifted in time. So much that it was noticeable if the gap was just filled.
    So I split the track at the drop-out.
    Then put those 2 parts in channel 1 in multi-track view.
    Then took about 5 seconds of the same section of another chorus and put it in track 2.
    With this as a guide I could move part 2 of track 1 to the right place in time.
    Then I deleted everything in track 2 but the necessary audio to fill the gap and finally moved this audio fragment up to track 1, so Audition 3 crossfaded them and then I made a mix-down.
    SteveG, do you mean to not fix the whole gap at once but with different selections in the frequency range?
    I personally didn't regret that I got Izotope RX, even with it's high price as for me it really was what I was looking for.
    Btw, sorry if my writing sounds strange, english isn't my native tongue.

  • Third-party effects/plugins for x-

    Ok... so i've got my xtrememusic. I love the equalizer, the crystalizer, the eax modes. I love how they don't degrade the sound one bit while doing their thing, unlike Winamp dsp/eq plugins.
    but my question is... why haven't i seen one single third-party dsp plugin that could take advantage of xfi's hardware and turn it into something more than a one-trick pony? it's got all this computational power, so don't tell me there isn't a way to actually make use of it!
    so... are there any such things floating around? has creative blown it again on the software side and hasn't even made an sdk to do the things i'm talking about? are developers simply uninterested in xfis for now and i should just be patient?

    on my audigy 2 in the audio console under EAX i just noticed there's an option for "custom" presets. how may i acquire these? and does the xfi have this too?

Maybe you are looking for