Third party windows 8.1 driver for VMSpc Version 3.0

I purchased a HP Stream 7 to use as an engine monitor for my motorhome. The tablet will not recognize the driver for the JIB. I have the latest driver and it installs perfectly on my Pavilion x2 with the same operating system. Nothing seems to work with the tablet. It appears to install manually without the JIB connected. Once I plug it in it states the software cannot load. The software is VMSpc from Silverleaf Electronics. Any help out there? I can use the Pavilion for the project but really want to use the stream 7 due to it's size.
Thanks,
Donald Tomlin

Yes, the jib connects by USB and I used a combination OTG cable to connect the power, GPS and USB to the same port. I have the program installed on half the screen and Delorme Street Atlas with GPS on the other side so that both are on the screen at the same time. Works great in all respects except for the driver issues so no engine data at this time but it looks cool. Also ordered a window mount for the PC so I can mount it like a Garmin. May be a problem with the Atom processor used in the PC.?

Similar Messages

Where can I download a Windows 7 64bit driver for the hp CDDVDW TS-L633N on my cpq60-615DX

EDIT --
I neglected to say that I tried updating the driver from the Device Manager device window and the result was a message saying it could not find a newer driver, that the one installed was correct.
Another EDIT
I also did not say that I have uninstalled the device, through Device Manager. Upon restarting the system, the drive was found and software installed but the problem remains.
Original message follows:
System: CPQ60-615DX
Windows 7 Home Premium 64bit
Drive: hp CDDVDW TS-L633N
In the process of installing some Roxio software, Creator 9, an unusable driver, are part of one, was installed. Now the device is not working.
When I didn't see on the list of devices on Windows Explorer, I went to Device Manager and found that it was flagged with the "problem" icon (exclamation point on a yellow background).
The General Tab Device Status box contains"
A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)
The following information is shown for the device:
hp CDDVDW TS-L633N ATA Device Properties windo
Driver Tab:
hp CDDVDW TS-L633N ATA Device
Driver Provider: Microsoft
Driver Date:     6/21/2006
Driver Version: 6.1.7601.17514
Digtal Signer:   Microsoft Windows
Driver File Details:
hp CDDVDW TS-L633N ATA Device
Driver files: c:\Windows\system32\Drivers\cdrom.sys
Provider:         Microsoft Corporation
File Version:     6.1.7600.16385 (win7_rtm.090713-1255)
Copyright:        Microsoft Corporation. All rights reserved.
Digital Signer:   Microsoft Windows
c:\Windows\System32Drivers\PxHlpa64.sys
Provider:         Sonic Solutions
File version:     2.03.27a
Copyright:        Copyright 2003 Sonic Software
Digital Signer:   Not digitally signed
It appears that the Creator install installed part of the driver but not one that functions. It might be a problem with Windows 7 or the fact that this install is 64 bits.
I have searched the HP site and can't find a driver for the device. When I look at the list of drivers available for this system, the optical drive is not shown.
I downloaded and installed the HP driver search program - or whatever it is called - and ran it. There were no devices listed on "Optical Drive" tab when I looked at the results - it could not "see" the drive.
I realize that what I need is probably a generic driver from MS, that's why one is not shown on the HP site, but how do I go about finding the right one for this device?
Is there a generic "one size fits all" driver for Windows 7 which can drive this device?
Any assistance will be greatly appreciated.
Bob and Simon
This question was solved.
View Solution.

HI nhgfdstr:
Thank you for your inquiry. I am pleased to assist you!!
I am sending you a link to a "CD/DVD Drive Is Not Detected (Windows 7)" click here. For your convenience here is a document on "Downloading or Updating Software and Drivers for HP Computers"   click here.   I am also sending you a link, to third party site, with a driver for your hp CDDVDW TS-L633N , " Hp CDDVDW TS-L633N ATA Device Drivers Download" click here.
Happy Holidays!!!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Security settings change when rendered from third party Windows 2008 R2 server

We created a fillable PDF form in Adobe Acrobat and made it Reader extended. Opening the form on a local hard drive the security settings show that Signing: is Allowed. We can sign documents in the form with a signature pad.
After we upload it to a third party Windows server 2008 R2, and we later go to access the form, the server renders it back to us in Adobe Reader. We are unable to digitally sign documents in the form with a Topaz signature pad. We notice that although the form was originally created with the form being Reader extended the security settings change to Signing: Not Allowed.
How can we get the server to render the document back to us where we can digitally sign documents in the form?

The second file still shows the extended rights header is present (it's warning you about restrictions at the top of the dialog while also reporting the method is "no security") but the digital signature which grants those extended rights will be invalidated if *anything* in the file structure is changed. I suspect in this case that the server software is doing something to your file; it may be trivial such as adding an XMP tag, but it's enough to break the hash check.

I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC

Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC
It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
Thanks in advance
This question was solved.
View Solution.

Hi:
Try this Intel chipset driver...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng
If the auto install file doesn't work, download and unzip the second file listed (zip file).
Go to the device manager and click on the smbus controller needing drivers, click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that was created when you unzipped the file.
Make sure the Include Subfolders box is checked and see if the driver installs that way.
For the mouse pointer problem try reinstalling the touchpad drivers.

I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng

Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng
It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
Thanks in advance
PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03\3&11583659&1&FB
PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03
PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C
PCI\VEN_8086&DEV_9CA2&CC_0C0500
PCI\VEN_8086&DEV_9CA2&CC_0C05
This question was solved.
View Solution.

Hi:
Download and install the Intel chipset driver from the link below.
https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
The second file on the list is the auto install file.

Windows 8.1 Driver For MSI 760GM-P21

My Motherboard is MSI 760GM-P21. My Motherboard has build in ATI Radeon 3000 Graphics Adapter. I Want Windows 8.1 Driver For ATI Radeon 3000. Is It possible To Get The Windows 8.1 Driver For ATI Radeon 3000 ?....

Since AMD did not intend to provide Win8.x support for the 760GM chipset thus drivers weren't available.
The final support is Win7.

Third-Party Licensing and Activation Toolkit for Labview 8.5

There is any Third-Party Licensing and Activation Toolkit for Labview 8.5 as LV2010. PLS help..
Solved!
Go to Solution.

I know what you are asking and in the other thread, you were told it was for 2010 only. There is some support for 2009 but not for your old version. Go with the dongle suggested or upgrade your version of LabVIEW.

Need Windows 7 WiFi driver for Compaq nx7010

Were can i get Windows 7 WiFi driver for Compaq nx 7010

Curt try here.
http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=6&Level=5&Conn=4&DownTy...
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Recommended Third Party Archive and Purging Software for Oracle Database (Oracle CC&B)

Hi,
We are currently exploring third party archive and purging software for Oracle Database specifically used by an Oracle Customer Care and Billing implementation. Our current data is growing that we think archiving and purging is a now a viable option. Thanks.
Regards,
Dennis

According to the fine Oracle® Utilities Application Framework Administration Guide Chapter 17, "Archiving and Purging" is readily available to CC&B.

WINDOWS 2008 R2 DRIVER FOR OFFICEJET 4610 ALL IN ONE PRINTER

i am using hp officejet 4610 all in one printer. I need windows 2008 r2 driver for this.
please help
saleem

Hello Saleem,
Welcome to the Forums
I have checked the available drivers for your Officejet 4610 and did not see an available driver for Windows 2008 R2. I will post you the link to the drivers that are available below.
HP Officejet 4610 All-in-One Printer Drivers
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can we Monitor third party Windows servers through Cisco Prime

Hi Team,
We are using Cisco Prime assurance and are currently monitoring Cisco UCCE Components through it.
Meanwhile we have few third party windows servers , which we would like to monitor it through Cisco Prime , just to maintain a single monitoring tool.
If yes, please share the steps or link.Also highlight the limitations in that.
Regards,
krishna

Seems Cisco Prime Assurance Manager is now obsolete and end of life already.
It is replaced by Cisco Prime Infrastructure. CPI supports third party/vendor devices to some minimum extent with limited management details collected via SNMP Templates.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Windows 7 beta driver for the Creative N400

Hi everyone,
There is a Windows 7 beta driver for the Creative N400 speakers system.
Creative Speakers Beta Driver 1.02.000
Filesize : 24.68 MB
Release date : 13 Apr 09
File Name : USPK_W7DRVBETA_US_1_02_000.exe
This download is a beta driver providing Microsoft Windows 7 Beta support for certain Creative speakers. For more details, read the rest of this web release note.
Take note of the following:
* THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver.
* We recommend that only experienced users install this driver. Do not install this driver on a system used to perform critical tasks.
* Users who are looking for stable drivers should wait for the final release. When this happens, user should install the latest Creative driver available.
This download supports the following devices only:
* Creative N400
Requirements:
* Microsoft Windows 7 Beta
Notes:
* To install this driver
1. Download the .exe file onto your local hard disk.
2. Double-click the downloaded file.
3. Follow the instructions on the screen.

Sorry but this information is not available at this time. If there is any updates, you will see it in the announcement page.

I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store.

I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store. My Mac Air Book is limited to update up to OS 10.6.8, unaware of updating the new version of Mac Cleanse I bought from App Store, this new version does not support my OS 10.6. How can the App Store provide me with an earlier version of Mc Cleanse?
Thanks,
jerson

It can't. That app is now lost to you.

Logic Pro 9.1.1 AU third-party plug-ins ongoing issue for many

Where is the Logic development team on this? Nearly all third-party AU plug-ins produce random pops and clicks at the beginning of playback and on occasion randomly during playback but before audio regions in tracks with these plug-ins installed. These pops and clicks are even visible in the track's meter. http://www.gearslutz.com/board/music-computers/482381-logic-3rd-party-plugs-pop- click-nightmare-how-does-rest-world-do.html How many people need to complain? Is Logic Pro considered production software?

I can't imagine a more textbook and apple-friendly environment than what I have. 32-bit is not the problem. I don't believe logic runs at 64 until you're on os 10.6 and I'm still on 10.5.8. My entire rig is what you'd see in an apple store logic demo. I've tried nearly everything:
1) All standard optimization tips including but not limited to no date/time updates, no airport/wi-fi, no bluetooth
2) I have a ultra high-quality external fw drive by G-drive
3) Standard issue ensemble with updated firmware
4) Moving AU component files from system library to user library
If you look at the number of people commenting on the GS thread as well as other forums – the problem is common and needs to be fixed. I'm not the only logic user plagued by this issue:
http://www.logicprohelp.com/viewtopic.php?t=43306
http://www.logicprohelp.com/viewtopic.php?t=50030
I really believe it has something to do with how many third-party plug-ins handle AU's reset or initialize callbacks; somewhere in between. This bug is clearly affecting many users and I'm coming close to starting a petition and devoting some serious time to making a big dorky stink about it on youtube.
Either the AU spec needs to be updated to clarify some tricks (or hacks) specific to Logic's on-demand DSP usage or the logic team needs to publish a notice to all "Logic" AU developers. Optionally, if Logic had a preference to turn OFF on-demand AU DSP (so that plug-ins are always-on like in every other DAW or...ugh...outboard gear). Logic's on-demand AU DSP handling is outdated considering the processing power available in ANY apple computer made within the last 3 years. My CPU meter in Logic barely even lights up. On-demand DSP is overkill and antiquated and the least Logic can do is provide production or mission-critical users the ability to opt-out if they have the CPU power to do so.
Having said all that; I hope I'm wrong about something and can come back here to eat my words and feel very embarrassed about my rant. I'm going to keep digging for solutions – hopefully, I'll find out the secret to whatever it is the few of you are doing to keep your third-party AU plugs quiet before an audio region starts.
Also; Scott at Stillwell Audio has graciously begun trying to track down this very issue and is one of the few DSPers who has taken interest in helping Logic folk.

Can I use third party Windows CE based touch panel to control my system?

I want to use a WindowsCE based touch panel to control my system by connecting a CompactDAQ to it through USB and installing the.exe file built from LabVIEW and installing the CompactDAQ drivers.
It sounds doable, but I don't know if WindowsCE does support those .exe files or the hardware drivers or if there is something I can do to make it support them. I hope anyone has an idea about this and can help me.
Thank you
Solved!
Go to Solution.

I found the following statement at :
LabVIEW Touch Panel Module Getting Started Guide
http://zone.ni.com/devzone/cda/tut/p/id/5868
"The deployment procedures discussed previously for NI touch panels are not guaranteed to work for third party touch panels. If the use of a third-party touch panel is desired it must met certain requirements in order for the LabVIEW touch panel module to properly work with it.
The LabVIEW Touch Panel module only officially supports the two operating systems and two processors that the NI touch panel devices are based on. The operating systems supported are Windows CE 4.2/5.0 and Windows XP Embedded, while the supported processors include the StrongARM, XScale, and x86.
Another consideration when using a third-party touch panel is that a LabVIEW Touch Panel Deployment License must be purchased for each deployment of an application developed with the LabVIEW Touch Panel module.
In addition, specific Microsoft tools must be installed on the touch panel target in order for the LabVIEW Touch Panel application to function as expected. The following Microsoft eMbedded Visual Tools need to be installed:
Microsoft eMbedded Visual C++ 4.0
Microsoft eMbedded Visual C++ SP 4 or later
SDK for Windows Mobile 2003-based Pocket PCs
Reference the Where Can I Find the Microsoft Tools I Need for the LabVIEW Touch Panel Module? knowledge base article to find links to the current Microsoft download sites."
Kareem W.
National Instruments
Web Product Manager

Third party windows 8.1 driver for VMSpc Version 3.0

Similar Messages

Maybe you are looking for