This AE is not compatible with this version of Itunes????

Hello forum! i just setup a TC with two AE with air iTunes. They both work excellent with the sort pauses. Today i decide to run the Ethernet cable to each AE. Did the setup as commanded, i just tested it with a Macbook and MacbookPro and both work fine no more lack(yey). Everything is up to date TC 7.5.1 and AE 7.4.2.
My problem is that when trying to connect from a Windows 7 pc just one AE is connected, the other gives me this message ""The Remote speaker is not compatible with this version of iTunes"" i did every i could, hard reset on both, new setup same OS on both... so i really do not understand what the problem.
i have the lasted iTunes on the pc( re-downloaded twice today)
or
if i just select the AE that give me the error work's fine, but when i add the second one it says it been used by someones else.
please help.......
Any help would be much appreciated!!
thanks have a nice day
Message was edited by: elcarra21

Hello qqnicol,
What program do you run?
Please contact the software provider to confirm if this 32-bit program can run in 64-bit Windows.
As some programs can only run in specific version of Windows, please download the right version of software.
Most programs designed for the 32-bit version of Windows will work on the 64-bit version of Windows. Notable exceptions are many antivirus programs.
Device drivers designed for the 32-bit version of Windows don't work on computers running a 64-bit version of Windows too.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

  • Bootcamp support drivers "the version of this file is not compatible with the version of windows you are running"

    Hi,
    I've searched everywhere I can think of for a solution to this problem with no success. I see other people have reported similar issues and these have not yet been resolved.
    I have installed Windows 7 32 bit on a new Mac Mini under Bootcamp. When I go to install the Bootcamp drivers in Windows, I get the message "the version of this file is not compatible with the version of windows you are running". 
    Other people have reported this issue when trying to install 3rd party software on a 64 bit version of windows but I'm simply trying to install the Bootcamp drivers on a 32 bit version of Windows.
    Is it possible the Mac Mini needs a 64 bit version of Windows installed under Bootcamp? I haven't seen this requirement mentioned anywhere.
    Appreciated all and any help that can be offered.

    Welcome to the Apple Support Communities
    That's because the Late 2012 iMac and Mac mini only supports the 64-bit Windows 7 version, so the drivers you downloaded are designed to work with the 64-bit version and you can't install them on a 32-bit version. Install the 64-bit Windows 7 on your computer

  • "The version of this file is not compatible with the version of Windows you're running.[...]".What can I do?

    I must run a 32-bit programe  on a windows 64-bit operating sistem, and i receive this message:"The version of this file is not compatible with the version of Windows you're running.[...]". I tried with Troubleshoot compatibility - didn't
    work. I tried set to run in compatibility mode for Windows XP in file properties window and it didn't work.  What can I do more? I
    must run this programe to acces my database.

    Hello qqnicol,
    What program do you run?
    Please contact the software provider to confirm if this 32-bit program can run in 64-bit Windows.
    As some programs can only run in specific version of Windows, please download the right version of software.
    Most programs designed for the 32-bit version of Windows will work on the 64-bit version of Windows. Notable exceptions are many antivirus programs.
    Device drivers designed for the 32-bit version of Windows don't work on computers running a 64-bit version of Windows too.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Windows desktop application -- version of this file is not compatible with the version of Windows you're running

    I am developing on 64-bit Windows7 Enterprise using VisualStudio 2013.  I created a new Windows desktop VB.net application and just created a release build of the default solution/project targeting "Any CPU".  I provided the EXE to a
    colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
    "The version of this file is not compatible with the version of Windows you're running.  Check your computer's system information to see
    whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
    I changed the build configuration to create a "x86" build but my colleague received the same error.  Any ideas why this would be happening (I checked and my colleague has .Net4 Framework installed as well)?  Thank you for your time and
    response!
    Sunish Abraham
    "The version of this file is not compatible with the version of Windows you're running. 
    Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."

    Hi sunisha,
    According to your description, you'd like to run the application in your colleague's computer.
    I provided the EXE to a colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
    If you want to test the application, you could provide the whole Debug folder to colleague instead of the single exe.
    "The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
    Check if the collegue's computer is running 64-bit windows:
    Enter Control Panel, click on System and Security.
    Under this, you can view the system type. This will describe whether you have 32-bit or 64-bit.
    You can also try compatiblity mode.
    If the program is not compatible, then you may try to install and run the program in compatibility mode.
    Use the following steps:
    1)   Right click on the Program
    2)   Click on Properties
    3)   Click on Compatibility tab
    4)   Select Run this program in compatibility mode and select Windows Vista or whatever operating system the program was running successfully.
    And if you still have questions, I suggest you deploy the application to the Local Network with clickOnce, then your collegue can install the application from the network.
    #ClickOnce deployment
    http://msdn.microsoft.com/en-us/library/t71a733d(VS.80).aspx
    And also, you could recreate a new small application in your computer in Any CPU, then check if this small new application can work well in your colleague's computer. This can judge if the problem is caused by your application.
    If you have any other concern regarding this issue, please feel free to let me know.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When i try and load this brush pack i bought it says "Because this file is not compatible with this version of Photoshop"

    Ive Restarted photoshop Multiple times and it still Doesnt work im on photoshop cs5 and i havent had this problem in a while but again this is a abr file.

    If this problem still persists please verify that this brush pack is compatible with photoshop cs5-also it would help alot to know these things: if your photoshop is running on a apple operating system or windows  operating system  moreover what version of  operating system. Some other things that could hinder this brush pack from working are its installed incorrectly or in the wrong place also resetting cs5 preferences can help. Last if what you posted originally is true and or accurate-"-when i try and load this brush pack i bought" it says "Because this file is not compatible with this version of Photoshop" Then it is exactly as it states a Brush Pack that will not WORK with CS5.

  • Firefox was working, today did not start with error message the the version of this file is not compatible with the version of windows you're running.

    Computer has Windows 7 Ultimate 64bit. Firefox has run fine for over a year on this computer. Nothing was changed or updated except Windows update shows that it installed updates on Aug 19. I had computer off for week before because out of town, came back and started on Aug 18, but Firefox worked on that day. Did not use FF again till today. Today on Aug 22nd, firefox will not start, shortcut icon has changed to program not there. Exe in folder when clicked brings up error message say the version of this file is not compatible with version of Windows I am running. Firefox exe shows created Aug 20. I suspect update, either Windows or FF but lean towards windows, happened that broke things. I notice IE 10 updates, .NET framework updates and malicious software removal tool updates were installed. I have tried restarting computer, did not fix. Tried to run as admin, didn't work. I do not want to uninstall FF unless have to because of all the stuff I have in there, bookmarks, last pass passwords, etc.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files ('''not the profile folder where the bookmarks are stored''') and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • Message "this app is not compatible with this iPad" What am I doing wrong?

    I am trying to update my apps and when I touch update all I get the message 'this app is ot compatible with this I-pad.  this has never happened before, what am I doing wrong?

    One or more of the apps you are updating is seeing that you have not yet gone to ios5.  All the iwork app changes, for example, will not upgrade until you do.   What you can do is tick them individually.  If that particular app will update, then it will.  If it won't it will tell you, and you can go back and get them later after you do the ious 5 update.  Last night i decided to update before i started the ios 5 upgrade, and there were 16 apps waiting for up date.  All but 5 did update, but not the i works, and 2 others.
    It takes a little longer to do them 1 at a time, but it is better than staring at the stupid 'not eligable' notice.

  • IPhone 4 continues to display "this accessory is not compatible with this device" I only got my phone a week ago and I have only plugged a charger into it... Any ideas on how to fix? Ask your question.

    Phone is and has continued to display "this accessory is not optimized on this I phone... It flashes on the screen continuously even when phone is locked, wasting battery life in the process. I could understand if I had used a dodgy charger but I have only used the charger I got with my iPhone. And it has been happening since the first time I charged it. Also the keyboard sounds go on and off when I'm typing, any ideas. Cheers.

    Hi,
    Not that's not normal and is one of the Problems I was having before Restoring as New...
    Just make sure you Sync ALL your important Info... Contacts... Music... Etc... to your Computer...
    and then do a Restore as New...
    i was a bit reluctant at First, because I hadn't done it before... But it was So Easy and am Really Glad I did...
    Cheers,
    Here's Another Useful Link:
    http://www.apple.com/support/iphone/

  • Itunes library not compatible with new version of iTunes??

    hey guys and gals,
    when i open itunes, it opens a message saying:
    "the file 'itunes library' cannot be read because it was created by a newer version of iTunes"
    can anyone help me because I have a **** of alot of music with every information and album art for each song.
    thanks in advance,
    Dean

    I have run into the same problem. Like others here I could get to my library and playlists via the finder. Next I tried re-creating my iTunes library and playlists as described by Article HT1451. This process is easy enough but takes some time if you have a large library. Once I finished the re-creation process my iTunes opened without any problem from the iTunes icon. However if I opened iTunes via the finder, then opening iTunes from the icon went back to the old error message!! Fixing it required another re-creation process. Like others my music and video files are on a separate hard drive. Looks like a bug Apple needs to fix. In the meantime stick with either the icon or the finder but not both. Hope this helps.

  • Error states: the version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 or x64 version of the program, and then contact the software publisher. My compute

    Where do you go for help when it tells you to contact the software publisher?

    Hey jz,
    Could you please let me know when does this error comes on your system. What kind of file do you have?
    Also, tell me what is your OS and Acrobat version?
    Regards,
    Anubha

  • "The version of this file is not compatible with the version of windows?

    Both files are in my folder but getting the above message. Elements 10 for windows 7

    Hi,
    Could you please list your system specifications here, like the version of Windows (64 or 32bit), the processor type, etc..
    I presume you are receiving this error when trying to install Elements 10 on Windows. Could you copy the downloaded .exe & .7z files to a folder on your desktop and then try to run the .exe file?
    Thanks

  • This service is not compatible with this call

    Hey,
    I hope someone can help me, my customer says when try to dial a 11 digit normal number in the UK they receive a message as the title.
    No special number just a normal 11 digit but others work normally.
    its CUCM
    Please rate the post
    Shibly Ibrahim

    Hey,
    Thanks for the quick response. So it is not a configuration issue on my end is it?.
    Because theyw ere using an analog phone system with dass before migrating to CUCM with the dass lines converted to ISDN30. They say they didnt have the issue before
    Please rate the post
    Shibly Ibrahim

  • "The version of this file is not compatible with..." Cannot install games.

    I'm at my wits end here. I've installed Bootcamp and a copy of Windows 7 (64) and am currently attempting to install Assassin's Creed II and keep receiving the error: "The version of this file is not compatible with the version of Window's you're running..."
    This happens with quite a few of the games I own...I've tried copying the contents of the disks to the hard drive and running with privileged access...tried opening the setup files from CMD with elevated permissions...nothing.
    Any help?

    I have the exact same problem as well. I've been having this since I tried installing the 3.0 drivers for Bootcamp drivers. The 2.2 drivers worked perfect, and I wasn't getting this error. I'm pretty sure It's something in the drivers as well, but nailing it would be very hard. It also doesn't appear to happen to everyone with similar spec'd Macs either. It's weird. Any solution to this would be really helpful. Thanks.

  • Photoshop CS3 gives me an error "not compatible with his version.."  when trying to reopen files

    Photoshop CS3 gives me an error-
    "Could not complete your request because this file is not compatible with his version of photo shop" when I try and reopen psd's or layered tiffs,
    it usually happens to files over 1gb in size,
    I can open them up in illustrator but not in photo shop,
    this is very annoying, it also happened today in CS2

    "could not complete your request because the file is not compatible with this version of photoshop"
    We've just had te same problem with a PSD file, it could not be opened by Photoshop CS nor CS3, and ImageReady showed the layers empty. So we downloaded The GIMP to give it a try. It took a extremely long time for The GIMP to open the 500MB file, but it did, without throwing error messages. Some layer masks were interpreted incorrectly, and the color profile tag was ignored. But at least the project could be saved to a new Photoshop file, which was opened by Photoshop without error messages except for the color profile tag.

  • Officejet 4620, not compatible with windows version installing driver 64bit

    Hi (October 1, 2014, 9:15 am PST)
    When I run OJ4620_Basci64_1315.exe I get the following error msg:
    The version of this file is not compatible with the version of Windows you're running.
    Check your computer's system information to see whether you need an x86(32-bit) or
    x64(64-bit) version of the program and then contact the software publisher.
    My system is
    Lenovo WIN 7 Premium 
    64-bit Operating system
    Please advise if you have any idea how I can get the driver installed.
    Thank you
    Geoff

    Hello there! Welcome to the forums Geoff aka @gml00 ,
    I would suggest trying the driver I have linked you to below for installing your Officejet 4620 on Windows 7.
    HP Officejet Full Feature Software and Driver
    That driver should work! Let me know how it goes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • Applet looses its focus in IE

    Hello, all! I working with applet that will be used as a simple code editor with highlighting of different programming languages. This applet based on JTextPane wrapped in JScroll pane. When I test this applet with java applet viewer - all works fine

  • Intel audio & alsa problem

    Hi everyone! first post here in the forums So as part of a work I'm doing with HRTF (binaural audio) I need OpenAL to use 44100hz. I was using it fine on my previous OS, but in Arch I get this error with all apps that use openal: AL lib: (EE) UpdateD

  • Revaluation J1AI - APC accounts not posted

    Hello SAP Guru, Good day! I tried to run J1AI to post revaluation. After running the tcode I saw the revaluation output is correct. However when I look at FI document in AW01n, do document was posted. Then I tried to run AFABN to depreciate the asset

  • BUG IN SAP STANDARD EXTRACTOR

    Hi Experts, We are using the SAP Standard datasource 2LIS_11_V_SSL for populating the Service Level DSO. The DSO has Sales order number, item number and schedule line number as primary keys. The standard extractor is fetching incorrect delivery numbe

  • BIC Mapping creates wrong  segment sequence

    Hello, i have a problem with Seeburger BIC Mapping  invoic02 => Edifact D96a. From the PI Message mapping is the following source structure Segment             Value S_BGM   C_C002      D_1001          380      D_3055          9 D_1004              9