This circuit has no power sources: unable to determine the simulation timestep automatically. Please add a power source or set the simulation timestep under "Interactive Simulation Settings" to proceed.

Hi again.
I built this circuit but I keep getting the error message in the title. I have gone through the older threads on it but can find nothing to help. If I run the digital smaples they work fine. If I run other digital circuits I made they work fine. I have tried this circuit on another PC and get the same error.
Any help would be greatly appreciated.
Ray
Attachments:
Five input TTL circuit.ms10 ‏81 KB

Followed the procedure I just told you, and it works fine.........again. I've attached the fixed version, see if it works there now.
Signature: Looking for a footprint, component, model? Might be here > http://ni.kittmaster.com
Attachments:
Five input TTL circuit_fixed.ms10 ‏82 KB

Similar Messages

My iphone 5 doesn't sync with itunes on my pc. it says this computer has previously been synced to another io6 device or iphone? please help what to do?

My iphone 5 doesn't sync with itunes on my pc. it says this computer has previously been synced to another io6 device or iphone? please help what to do?

The error message you're seeing is likely the other way around -- i.e. something like "This iPhone has previously been synced with a different computer". There's no problem syncing multiple iOS devices to the same computer.
However, the reverse is not true for the iPhone -- you cannot connect an iPhone to another computer without it being erased, even if you manually manage music and video. So, it sounds like you've been syncing your iPhone to a different computer?
Also, 5.1 (not 5.0.1) is the latest iOS.

When updating to Mountain Lion I get this measageThis disk has S.M.A.R.T. errors. This disk has hardware problem that can't be repaired. Back up as much data as possible and replace the disk.

When updating to Mountain Lion I get this measage
This disk has S.M.A.R.T. errors. This disk has hardware problem that can’t be repaired. Back up as much data as possible and replace the disk.
never had this before download of Mountain Lion.

As others have stated, this is a potentially catastrophic event. Consider yourself lucky, as hard drives usually just fail wihtout warning. Your disk could die at any time. This is a mechanical / physical failure, not software related.
Going forward, I would suggest utilizing a utility that monitors SMART status, which you obviously don't have, such as SpeedTools.

Firefox won't let me use any of the links-I can't add new links by clicking on the + box. I can't delete or add links. I can't even open one of the links at the top of this page Thanks

Firefox won't let me use any of the links-I can't add new links by clicking on the + box. I can't delete or add links. I can't even open one of the links at the top of this page

I'm not sure what you mean by "the + box". Is that a feature on one of your toolbars?

Recent iOS 7 has provided background setting with parallax feature, which zooms in the photo no matter what. Is there anyway to set the wallpaper as it appears in the photo? Please help,

Is there anyway to set the wallpaper as it appears in photo album?
FYI im using 4S currently

i believe it zooms, even if the parallax feature is turned off (which can be toggled by going to settings -> general -> accessibility -> reduce motion
also, more information can be found at this link https://discussions.apple.com/thread/5318510

This circuit has no power sources: unable to determine the simulation timestep automatically.

hi everybody:
how I can get resolvent of this issue
paul deng
13549311889
paul deng

I don't know if it is just me, but I couldn't get your picture. Try re-posting it and we'll see what we are dealing with.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Receive this error message and cannot use my editor in photoshop elements 12. Runtime Error! program: C\Program Files(x...) This application has requested Runtime to terminate it in an unusual way. Please contact the applications support team for more inf

Could I please have an answer to resolve the problem?

See if this helps:
https://helpx.adobe.com/photoshop-elements/kb/microsoft-c-runtime-error-launcing.html

TS1717 Runtime Error, Program.... iTunes.exe. This application has requested ther Runtime to terminate in a unsual way. Please contact the application`s support team for more information.

When I try add file to library (PDF files), Itunes stops, and display the message. I've tried to start iTunes in Safe Mode, but stops also.
Could someone give me some advice about solutions?.
I have a HP laptop with Windows 7 64 bits.
Thanks.

I have the same problem.
You solved?
You tell me how you did it?
thanks

TS1292 HELP: i have tried and tried to enter my itunes gift card code and it just says this code has not beed activated properly...if any one could please help me that would be a big releif, i live in nz by the way...thanks!

please help...i live in nz and my itunes card wont work...ive tried and tried and it never works please help im really worried, if you could help that would be a huge relief! thanks...

Ask the people at the store the gift card came from or the iTunes Store staff for assistance.
(121383)

WRT300N: Please add soft power-on reset feature

I find that after being up and running for a few days, my router starts to route poorly -- i.e. forwarding traffic between PCs on my LAN gets slower and slower. Pings between machines show intermittent long delays.
Cycling power fixes the problem. I had the same issue with my prior Netgear G router and hoped that a different manufacturer would not have the same problem. I don't know exactly what causes it, but I've been told that over time, on inexpensive home routers, the routing tables/logs fill up, and then FIFO management of these memory resources slows things down. Sounds plausible.
In any case, the only way to fix it is to cycle power. Obviously, I can't do this remotely, so a control in the web GUI to perform a power-on reset (NOT a factory default reset) would at least make this barely tolerable.
- OR - let us know about the undocumented web interfaces to do some of this stuff, if they exist (I can't imagine they don't)

There is a link somewhere for making suggestions. They probably don't have that as an option to extend LCD/backlight life.

After closing Firefox with the red "x" in the upper right corner, every time I start firefox again it launches the last page(s) I was (yes I have it set to go to homepage in my settings, this does not happen if I close through the menu).

I have a Win 7 PC using FF 4.0.1.

I have noticed something similar with my Macs. If I close with the red X, I get a popup message asking if I want to close the tabs or cancel. If I close with Firefox > Quit or Cmd-Q, I get a message asking if I want to Save and Quit, Quit, or Cancel. The thing is, using the red X, is just supposed to close the interface, not the underlying process.

This computer has previously been synced with an iPhone or other iOS.

I have just upgraded my iPhone 4 with the recent upgrade to 5.0.1 - I get the response "This computer has previously been synced with an iPhone or other iOS". I then get two options: 1) Set up as new iPhone, or 2) Restore from Back Up. So I restore the device - but it returns to the page that says "SET UP iPHONE, and gives me the 2 options again - set up new phone or restore. It will not sync my purchased apps onto the iPhone - my iPhone only shows bookmarkes saved.
When plugged into iTunes, it shows on the far left as my device plugged in, yet if I go to "FILE" - in the drop down menu, it shows "sync iPod" or "transfer purchases for iPod" but not iPhone... and its shaded grey. iTunes is up to date, and the phone is not jail broken. iTunes still has all my apps stored there - but they will not sync to my phone.
I have also rebooted my iPhone by holding the HOME and POWER button down, then releasing the power button. Nothing seems to work.
Any help would be greatly appreciated!

Try setting it up as a new phone. There is probably something wrong with the existing backup.

ISE 1.2 Guest Portal - This device has not been registered.

I have setup and SSID on my WLC. I got the redirecting to my ISE guestportal working.
However when I sign in I get a Device regitration Page
"This device has not been registered"
Unable to obtain the user information needed for network access.
The device ID is grayed out and blank.
Any assistance in this matter would be greatly appreciated

Thanks Johnston,
P.S for those who needs the path ISE 1.2 Administration -> Web Portal Management -> Settings -> Multi-Portal Configurations -> DefaultGuestPortal -> Operations.
On another note
When I login - I get my acceptable usage policy.
Accept
Then get a Device registration Portal where I can add the MAC address.
Now I have two quistions.
When I add my test mac address the url redirects to myservername:8443/guestportal/AfterDevReg.action - unable to connect <- that's the one issue.
The other is - Can't I by pass the MAC? ie once the user is signed on to get access.
Curretly I have the following settings enabled.
Enable Mobile Portal
Allow guest users to change password
Guest users should be allowed to do device registration <- if I disable that after signon the page just flash back to the guest portal.

"Licensing For this Product Has Expired" (But I just bought it!)

I'm having an installation problem, with Adobe CS4 Design Premium for Windows on Vista(64). For technicality purposes, I believe everything installed fine, but I have not been able to open the programs even once, which apparently means this is an installation issue.
Here's the situation:
I had a trial version of Photoshop CS4, it expired, I uninstalled it (or at least went to Control Panel-->Programs And Features--->"Uninstall"), bought Adobe Premier with my student discount, installed it with the new serial number and the 2 CDs without any problems (so I thought), but now every time I try to open any CS4 Program (Photoshop, Dreamweaver, Illustrator, etc.--anything but Acrobat Pro or Bridge CS4) I get a message saying, 'Licensing for this product has expired.'
I found an equivalent issue with Macs and there appears to be a quick fix:
"The tech had me remove APPLICATION SUPPORT > ADOBE > ADOBE PCD > cache > cache.db (to trash)" This apparently solved the problem.
Does anyone know an equivalent fix for Windows PCs?
I've have tried downloading the fix from the following website:
http://www.adobe.com/support/contact/licensing.html
(Running this multiple times, rebooting, etc.) but I believe the above website is just for problems of "License has stopped working" and not "Licensing for this product has expired"
I also tried setting my laptop's date/time back to May 31st 2009 following these instructions:
http://kb2.adobe.com/cps/494/cpsid_49485.html
but when I do that, I get the original, 'Accept these Terms' page, and as soon as I click "I agree' that page disappears, and nothing else happens. My computer works fine, but the program does not start. Therefore I can't deactivate the program/serial number, reset the correct date, start the program, and enter the proper serial number.
Any chance someone knows the appropriate Windows File to remove to solve this problem? Or have any other advice?
Many thanks in advance,
Kevin
PS--I've tried to stay professional about this situation, but it really has me livid. I'm appalled that something that cost me 300+ dollars (and I am fully aware it costs most honest people significantly more) could have caused me to waste the better part of a day, and get so frustrated, and I am still no closer to a solution. If it doesn't get resolved soon I am tempted to try returning the software as 'defective' (which for all intents and purposes it is) or never buy an Adobe product again. My friends have less trouble with the cracks/keygens/etc out there, and they're up $300+ on me.

UPDATE:
So, I took John T. Smith's advice (thanks for the phone number--relatively short wait time compared to the other number I had tried), and called Customer Service. I got the usual run-around, where the first guy wanted me to try all the things I described in the original post. Had me try something else (which involve reinstalling) which didn't work. Finally, the next gal I talked with admitted she didn't know the solution, and the problem would be 'upgraded' to the next higher level of presumably smarter tech people. I asked the time frame for this, and she said 1-2 days, which I wasn't happy about, and finally spoke with her supervisor. This person walked me through the uninstallation, and had 'some files' I should delete. AND FINALLY, I GOT WHAT I WANTED:
He said if I just removed/deleted the following file:
C:\Program Files(x86)\Common Files\Adobe\AdobePCD\Cache\Cache.db
So the order he wanted me to do it was:
Uninstall CS4 Design Premium (with windows vista Program and Features in the Control Panel, remove the above file, restart my computer, and reinstall the software. The reinstall didn't go smoothly the first time or two (early on, it said Illustrator, Photoshop, etc could not be installed..) so I just closed ALL programs, and tried again) and finally everything works, or seems to!
From what I read on a Mac forum with the same problem, it seems like I might not have had to uninstall/reinstall the whole suite (which I wish I'd tried, because it would have saved me nearly 2 hours).
But at any rate, everything seems to be working. I wrongly assumed the PC version would have had a different culprit file to be removed. I wish I'd searched my hard drive for the AdobePCD folder earlier. But...now I am happy.
Cheers, and I hope this post might be of some help to a poor unfortunate lad with the same problem I had.

HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

Click here and follow the instructions.
(98724)

This circuit has no power sources: unable to determine the simulation timestep automatically. Please add a power source or set the simulation timestep under "Interactive Simulation Settings" to proceed.

Similar Messages

Maybe you are looking for