This connection is untrusted with (Error code: sec_error_unknown_issuer) received for one user on computer on various https connections, same sites accessible by other users

Windows 7. Firefox 9.0.1. Receiving above error on various sites which I have used succesfully before and which I can still use if I log on as a different user on this pc.

Fixed by deleting cert8.db on profile directory.

Similar Messages

  • This connection is untrusted with Error code: sec_error_unknown_issuer.

    Hello,
    When I try to open G-Mail & twitter and some other trusted websites, I got the following warning "This Connection is Untrusted" with Error code: sec_error_unknown_issuer.
    For most of the site, I can bypass by clicking « I understand the risk » but this is a bummer but for Gmail and Twitter, there is no other button than "Get me out of here"
    When I go through « about:support » and « reinitialise » system, I no longer have the problem, but not only it erases all my personnal set-up but the problem always come back when I restart my system
    Date and time are set right.
    I have also tried to reinstall completely FIREFOX to no avail
    I am using McAfee Total protection 2014 & Firefox 31.0 on Windows 7 64 bits.
    I have had this problem for the last 5 days and only Firefox.
    Other Browser ( IE8.0) is working fine
    I have searched for solutions but they all failed -
    Deleting cert8.db did not solve the problem either
    How do I solve this Problem?
    Thanks and Regards

    You can check the connection settings.
    *Tools > Options > Advanced > Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • 'The termination occurred in system E03 with error code 403 and for the rea

    hello gurus,
                     i am very new webdynpro for abap.i strucked in one place at the time of designe a webdynpro component.
    i created one webdynpro component with one view.when i am going to design the view it is showing an error like .
    Service cannot be reached.
    'The termination occurred in system E03 with error code 403 and for the reason Forbidden'
    for this we need to activate some service at sicf transaction level.
    could anybody suggest me which service i need to activate to overcome my problem.
    best regards,
    raja.

    If you are creating webdynpro component for first time then check the below link and activate the service mentioned.
    http://translate.google.co.in/translate?hl=en&sl=de&u=http://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008b4d9ae10000000a155369/content.htm&ei=C56BTqinCMTqrAfr5sycDg&sa=X&oi=translate&ct=result&resnum=1&ved=0CB8Q7gEwAA&prev=/search%3Fq%3Dhttp://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008
    First check above one.
    this is for understanding
    http://sdnabape.blogspot.com/2010/11/step-by-step-configuration-for-running.html
    Regards
    Srinivas

  • Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

    I have a SSIS project that I am newly running on the SQL server (2005) .  It was previously run on my PC.  I am importing data from a DB2 server to the SQL server.
    I am in the SA group on the server
    My connection to DB2 works
    When open the package and run it in preview mode, I can retrieve the data.
    When I execute the package I get the below errors:
    [MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
    [DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
    What I have already done that has not worked:
    The original Protection level was set to EncryptSensitiveWithPassword. 
    I have reset the Package Password.
    I have set the protection level to DontSaveSensitive
    I saved the package on the server and set a Package Password.
    I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
    Error continues

    Yes.  The Drivers are installed and I have a successfull connection.  I am trouble shooting the issue on the server in BIDS.  I can connect to the DB2 server via the Connectionmanager.  I can also preview the data in the OLE
    DB source connection.  Therefore I know that I have a proper connection
    If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
    will enable you to change connection info at runtime.
    If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Error code 150:30 says to restart my computer, but I ge the same message for which I'm supposed to come here for help. What do I do with this error?

    I invoked Photoshop Elements and received this message:
    This product has has (sic) encountered a problem which requires that you restart your computer befor4e it can be launched.
    If you continue to see this message after restarting your computer, please contact either your IT administrator or Adobe technical support for help, and mention the error code shown at the bottom of this screen.
    Error: 150:30
    http://www.adobe.com/support/

    Thank you Barbara, for your feedback. I actually got a person in the Adobe chat room to walk me to this link http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html . Solution 1 did not work, but Solution 2 worked like a charm. I appreciated the fix!

  • I have 2 computers on a router. For the same website 1 computer works ok. For that same website the other computer comes up with (error code: sec_error_unknown_issuer) Both computers using firefox 3.6.12.

    Both computers are using Windows XP SP3 operating systems.

    See this [http://www.networking4all.com/en/support/tools/site+check/report/?fqdn=https%3A%2F%2Fsecure.winterthur.org%2Fecommerce%2FitemList.aspx%3Fnode_id%3D55247&protocol=https Site Check report.]
    Error while checking the SSL Certificate!! <br />
    Unable to get the local issuer of the certificate. The issuer of a locally looked up certificate could not be found. Normally this indicates that not all intermediate certificates are installed on the server.

  • Adobe Air cannot connect to internet with error code #2032

    When I was developing adobe air based product (Comm100 Live Chat, http://www.comm100.com/livechat/), I come accross such a problem: When I was trying to access internet from any Air application, I've been received error #2032. Have anyone met such situation before? How to solve it?

    Something's not right with your new Extreme. Return it to the Apple Store, or contact AppleCare and have them fix it.

  • Error code: sec_error_unknown_issuer while opening Gmail and many other trusted websites!

    I tried opening G-Mail and some other trusted website and Got "This Connection is Untrusted" with Error code: sec_error_unknown_issuer.
    There is no other button then "Get me out of here".
    Date/time are also set right.
    I am using Eset Smart Security 7 and Firefox on Windows 8 Single.
    I faced this problem just 2 days back just in Firefox. All other Browsers (Chrome, Iron, IE10) are working as Normal.
    How do i solve this Problem?
    Regards

    Thanks a lot Sir.
    It worked wonders.

  • /usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12

    Hi Experts,
    We have made a system copy from Production to Quality and it has been done successfully. Now we are able to open the database manually.  But when we are trying to start SAP it is not connecting the database base and it is giving error which is given below :
    /home/qasadm/startdb.log
    Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 4764729344 bytes
    Fixed Size                  2035312 bytes
    Variable Size            2432700816 bytes
    Database Buffers         2315255808 bytes
    Redo Buffers               14737408 bytes
    Database mounted.
    Database opened.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning and Data Mining options
    Mon Apr 12 10:45:40 IST 2010
    Connect to the database to verify, that the database is now open
    R3trans check finished with return code: 12
    ERROR: Startup of database failed
        Notify Database Administrator.
    /usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12
    ^C
    root@bsltest # tail -f /home/qasadm/startdb.log
    Connect to the database to check the database state:
    R3trans: connect check finished with return code: 12
    Database not available
    Mon Apr 12 10:55:53 IST 2010
    Shutdown database
    First trying to shutdown the database - May be,
    the database is in the nomount or mount state
    Mon Apr 12 10:56:22 IST 2010
    starting database
    SQL*Plus: Release 10.2.0.2.0 - Production on Mon Apr 12 10:56:22 2010
    Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 4764729344 bytes
    Fixed Size                  2035312 bytes
    Variable Size            2432700816 bytes
    Database Buffers         2315255808 bytes
    Redo Buffers               14737408 bytes
    Database mounted.
    Database opened.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning and Data Mining options
    Mon Apr 12 10:56:42 IST 2010
    Connect to the database to verify, that the database is now open
    R3trans check finished with return code: 12
    ERROR: Startup of database failed
        Notify Database Administrator.
    /usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12
    Kindly see the logs and request you to kindly help us how it will resolve this issue.
    Regards,
    Jitendra

    We have made a system copy from Production to Quality
    After client copy sap schema had been changed thats why its not connecting.
    fyi: Client copy and system copy both are different
    schema had been changed thats why its not connecting
    This is one of the post installation step after doing a system copy(reffer the ssytem copy guide)
    Problem has resolved
    Great, suggest you to close this thread
    Regards,
    Nick Loy

  • SAP ECC error:'Migration Monitor' exits with error code 103.

    Hi All,
    I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
    I am stuck at the import ABAP.Getting error
    ERROR 2008-08-08 16:10:53
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    1) imort_monitor.java.log-->contains
    java version "1.4.2_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
    Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
    Loading of 'SAPVIEW' import package: ERROR
    Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
    2)import_monitor.log
    ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPVIEW' import package is interrupted with R3load error.
    Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
    For mode details see 'SAPVIEW.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    INFO: 2008-08-08 16:10:52
    All import packages are processed.
    WARNING: 2008-08-08 16:10:52
    1 error(s) during processing of packages.
    INFO: 2008-08-08 16:10:52
    Import Monitor is stopped.
    3)SAPVIEW.log
      error message returned by DbSl:
    (IMP) INFO: a failed DROP attempt is not necessarily a problem
    (DB) ERROR: DDL statement failed
    (CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001"  ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001",  T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
    DbSlExecute: rc = 103
      (SQL error -942)
      error message returned by DbSl:
    (DB) INFO: disconnected from DB
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
    Only SAPDB: SAPSID srvice of SAP DB is only up.
    No other services of database are  up.And i am not able to up the other services also.
    Is it required to up the other services?
    If not?
    Why this error is occuring?
    Any help will be appreciated.
    Thanks&Regards
    Manisha das

    Hello Manisha,
    The one of the possible reasons for this is due to lack of H/W.
    Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
    If the issue is with H/W, then this should fix the issue.
    Hope it helps,
    Regards,
    Satish.

  • BR0804I BRCONNECT terminated with error code 5

    hi all,
    we r exporting source system , at step 2 "Update database statistice" error occur
    An error occurred while processing service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Source System Export > Central System > Based on AS ABAP > Database Instance Export( Last error reported by the step :Process call 'G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method,precision,space,keep -p 4' exits with error code 5. For details see log file(s) brconnect.log.). You may now
    choose Retry to repeat the current step.
    choose View Log to get more information about the error.
    stop the task and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/ERP/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/EXP.
    BR0280I BRCONNECT thread 2: time stamp: 2010-03-17 13.32.29
    BR0850I 69902 of 69902 objects processed - 82.467 of 82.467 units done
    BR0204I Percentage done: 100.00%, estimated end time: 13:32
    BR0001I **************************************************
    BR0280I BRCONNECT time stamp: 2010-03-17 13.32.29
    BR0848I Thread 2 finished with return code 0
    BR0280I BRCONNECT time stamp: 2010-03-17 13.32.29
    BR0879I Statistics checked for 0 tables
    BR0878I Number of tables selected to collect statistics after check: 0
    BR0880I Statistics collected for 69902/0 tables/indexes
    BR0889I Structure validated for 0/83617/0 tables/indexes/clusters
    BR0806I End of BRCONNECT processing: cecuoaya.sta 2010-03-17 13.32.29
    BR0280I BRCONNECT time stamp: 2010-03-17 13.32.30
    BR0804I BRCONNECT terminated with errors
    ERROR      2010-03-17 13:32:30.171
               CJSlibModule::writeError_impl()
    CJS-30023  Process call 'G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method,precision,space,keep -p 4' exits with error code 5. For details see log file(s) brconnect.log.
    ERROR      2010-03-17 13:32:30.187 [sixxcstepexecute.cpp:951]
    FCO-00011  The step updateOracleStatistics with step key |NW_Export|ind|ind|ind|ind|0|0|NW_Export_Pre|ind|ind|ind|ind|3|0|NW_ORA_Statistics_Update|ind|ind|ind|ind|0|0|updateOracleStatistics was executed with status ERROR ( Last error reported by the step :Process call 'G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method,precision,space,keep -p 4' exits with error code 5. For details see log file(s) brconnect.log.)
    plz guide

    hi,
    TST03, drop and recreate the index now export has failed 2 job outof 43,
    export_monitor.java.log
    Unloading of 'SAPAPPL0_4' export package: OK
    Export Monitor jobs: running 1, waiting 30, completed 12, failed 0, total 43.
    Export Monitor jobs: running 2, waiting 29, completed 12, failed 0, total 43.
    Export Monitor jobs: running 3, waiting 28, completed 12, failed 0, total 43.
    Unloading of 'SAPAPPL1_2' export package: ERROR
    Export Monitor jobs: running 2, waiting 28, completed 12, failed 1, total 43.
    Export Monitor jobs: running 3, waiting 27, completed 12, failed 1, total 43.
    Unloading of 'SAPAPPL1_3' export package: ERROR
    Export Monitor jobs: running 2, waiting 27, completed 12, failed 2, total 43.
    Export Monitor jobs: running 3, waiting 26, completed 12, failed 2, total 43.
    'SAPAPPL1_2.log
    (RTF) ########## WARNING ###########
         Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job completed
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145456
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100319145456
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
    Compiled Nov 18 2008 23:19:12
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -e SAPAPPL1_2.cmd -datacodepage 4103 -l SAPAPPL1_2.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: Export without hintfile
    (GSI) INFO: dbname   = "PRD20090418030425                                                                                "
    (GSI) INFO: vname    = "ORACLE                          "
    (GSI) INFO: hostname = "PRDSAP                                                          "
    (GSI) INFO: sysname  = "Windows NT"
    (GSI) INFO: nodename = "PRDSAP"
    (GSI) INFO: release  = "5.2"
    (GSI) INFO: version  = "3790 Service Pack 1"
    (GSI) INFO: machine  = "8x AMD64 Level 6 (Mod 23 Step 10)"
    (GSI) INFO: instno   = "0020500723"
    EXP) TABLE: "K002" #20100319145654
    (EXP) ERROR: DbSlExeRead failed
      rc = 103, table "K9RPRD7000001"
      (SQL error 942)
      error message returned by DbSl:
    ORA-00942: table or view does not exist
    (DB) INFO: disconnected from DB
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145654
    SAPAPPL1_3.log
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100319145655
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
    Compiled Nov 18 2008 23:19:12
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -ctf E I:\PRD_Exp\ABAP\DATA\SAPAPPL1_3.STR I:\PRD_Exp\ABAP\DB\DDLORA_LRG.TPL SAPAPPL1_3.TSK ORA -l SAPAPPL1_3.log
    (RTF) ########## WARNING ###########
         Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job completed
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145656
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100319145656
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
    Compiled Nov 18 2008 23:19:12
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -e SAPAPPL1_3.cmd -datacodepage 4103 -l SAPAPPL1_3.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: Export without hintfile
    (GSI) INFO: dbname   = "PRD20090418030425                                                                                "
    (GSI) INFO: vname    = "ORACLE                          "
    (GSI) INFO: hostname = "PRDSAP                                                          "
    (GSI) INFO: sysname  = "Windows NT"
    (GSI) INFO: nodename = "PRDSAP"
    (GSI) INFO: release  = "5.2"
    (GSI) INFO: version  = "3790 Service Pack 1"
    (GSI) INFO: machine  = "8x AMD64 Level 6 (Mod 23 Step 10)"
    (GSI) INFO: instno   = "0020500723"
    EXP) ERROR: DbSlExeRead failed
      rc = 103, table "QCMZPORD_LINE"
      (SQL error 942)
      error message returned by DbSl:
    ORA-00942: table or view does not exist
    (DB) INFO: disconnected from DB
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
    G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145717

  • SAP on V6R1 - ABAP Import:Program 'Migration Monitor' exits with error code

    Hello,
    We are doing an installation of SAP NW 7.01 SR1 on V6R1.
    <br>
    We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
    <br>
    We are again getting error in following steps:
    <br>
    sapinst.log
    <br>
    <br>WARNING 2009-09-30 23:25:28.477
    Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
    IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
    J9VM - 20090309_31291_BHdSMr
    JIT  - 20090210_1447ifx1_r8
    GC   - 200902_24)
    I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
    <br>Loading of 'SAPNTAB' import package: OK
    <br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
    Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
    Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
    Loading of 'DOKCLU' import package: OK
    Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
    Loading of 'SAPAPPL1' import package: OK
    Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
    Loading of 'SAPAPPL2' import package: ERROR
    Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
    Loading of 'DD03L' import package: OK
    Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
    Loading of 'SCPRSVALS' import package: OK
    Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
    Loading of 'SAPSDIC' import package: OK
    Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
    Loading of 'SCPRVALS' import package: OK
    Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
    Loading of 'SAPSSRC' import package: OK
    Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
    Loading of 'FUPARAREF' import package: OK
    Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
    Loading of 'TODIR' import package: OK
    Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
    Loading of 'SEOSUBCODF' import package: OK
    Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
    Loading of 'E071K' import package: OK
    Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
    Loading of 'SAPPOOL' import package: OK
    Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
    Loading of 'SAPSPROT' import package: OK
    Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
    Loading of 'SAPSDOCU' import package: OK
    Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
    Loading of 'SAPCLUST' import package: OK
    Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
    Loading of 'SAPSLOAD' import package: OK
    Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
    Loading of 'SAPSLEXC' import package: OK
    Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
    Loading of 'SAPUSER' import package: OK
    Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
    Loading of 'SAPDDIM' import package: OK
    Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
    Loading of 'SAPDFACT' import package: OK
    Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
    Loading of 'SAPDODS' import package: OK
    Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
    Loading of 'SAPUSER1' import package: OK
    Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
    Loading of 'SAP0000' import package: OK
    Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
    Loading of 'SAPAPPL0' import package: OK
    Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
    Loading of 'SAPSSEXC' import package: OK
    Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
    <br>
    WARNING[E] 2009-09-30 23:25:28.524
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
    <br>
    ERROR 2009-09-30 23:25:28.914
    FCO-00011  The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    <br>
    <br>import_monitor.log.
    <br>****************************************************************************************************************************************************
    <br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
    Loading of 'SAP0000' import package is successfully completed.
    <br>
    INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL0' import package is successfully completed.
    <br>
    INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is successfully completed.
    <br>
    WARNING: 2009-09-30 23:31:31
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2009-09-30 23:31:31
    1 error(s) during processing of packages.
    INFO: 2009-09-30 23:31:31
    Import Monitor is stopped.
    <br>*************************************************************************************************************************************************
    <br>SAPAPPL02.LOG
    <br>**************************************************************************************************************************************************
    <br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
    (IMP) INFO: a failed DROP attempt is not necessarily a problem
    (DB) INFO: TVV1 created #20091001110304
    <br>
    (DB) INFO: TVV1 deleted/truncated #20091001110304
    <br>
    (IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
    <br>
    (DB) ERROR: DDL statement failed<br>
    (ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
    DbSlExecute: rc = 99<br>
      (SQL error -539)<br>
      error message returned by DbSl:
    Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
    Your inputs will help a lot.
    Regards,
    Prasad

    Hello,
    We are doing an installation of SAP NW 7.01 SR1 on V6R1.
    <br>
    We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
    <br>
    We are again getting error in following steps:
    <br>
    sapinst.log
    <br>
    <br>WARNING 2009-09-30 23:25:28.477
    Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
    IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
    J9VM - 20090309_31291_BHdSMr
    JIT  - 20090210_1447ifx1_r8
    GC   - 200902_24)
    I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
    <br>Loading of 'SAPNTAB' import package: OK
    <br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
    Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
    Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
    Loading of 'DOKCLU' import package: OK
    Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
    Loading of 'SAPAPPL1' import package: OK
    Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
    Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
    Loading of 'SAPAPPL2' import package: ERROR
    Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
    Loading of 'DD03L' import package: OK
    Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
    Loading of 'SCPRSVALS' import package: OK
    Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
    Loading of 'SAPSDIC' import package: OK
    Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
    Loading of 'SCPRVALS' import package: OK
    Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
    Loading of 'SAPSSRC' import package: OK
    Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
    Loading of 'FUPARAREF' import package: OK
    Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
    Loading of 'TODIR' import package: OK
    Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
    Loading of 'SEOSUBCODF' import package: OK
    Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
    Loading of 'E071K' import package: OK
    Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
    Loading of 'SAPPOOL' import package: OK
    Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
    Loading of 'SAPSPROT' import package: OK
    Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
    Loading of 'SAPSDOCU' import package: OK
    Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
    Loading of 'SAPCLUST' import package: OK
    Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
    Loading of 'SAPSLOAD' import package: OK
    Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
    Loading of 'SAPSLEXC' import package: OK
    Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
    Loading of 'SAPUSER' import package: OK
    Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
    Loading of 'SAPDDIM' import package: OK
    Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
    Loading of 'SAPDFACT' import package: OK
    Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
    Loading of 'SAPDODS' import package: OK
    Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
    Loading of 'SAPUSER1' import package: OK
    Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
    Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
    Loading of 'SAP0000' import package: OK
    Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
    Loading of 'SAPAPPL0' import package: OK
    Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
    Loading of 'SAPSSEXC' import package: OK
    Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
    <br>
    WARNING[E] 2009-09-30 23:25:28.524
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
    <br>
    ERROR 2009-09-30 23:25:28.914
    FCO-00011  The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    <br>
    <br>import_monitor.log.
    <br>****************************************************************************************************************************************************
    <br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
    Loading of 'SAP0000' import package is successfully completed.
    <br>
    INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL0' import package is successfully completed.
    <br>
    INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is successfully completed.
    <br>
    WARNING: 2009-09-30 23:31:31
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2009-09-30 23:31:31
    1 error(s) during processing of packages.
    INFO: 2009-09-30 23:31:31
    Import Monitor is stopped.
    <br>*************************************************************************************************************************************************
    <br>SAPAPPL02.LOG
    <br>**************************************************************************************************************************************************
    <br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
    (IMP) INFO: a failed DROP attempt is not necessarily a problem
    (DB) INFO: TVV1 created #20091001110304
    <br>
    (DB) INFO: TVV1 deleted/truncated #20091001110304
    <br>
    (IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
    <br>
    (DB) ERROR: DDL statement failed<br>
    (ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
    DbSlExecute: rc = 99<br>
      (SQL error -539)<br>
      error message returned by DbSl:
    Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
    Your inputs will help a lot.
    Regards,
    Prasad

  • Testing ABAP Web dynpro: Error  code 403 and for the reason Forbidden

    Hi,
      We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
      Thanks
    Arunava
      However we are getting the following service error
    Service cannot be reached
    What has happened?
    URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system XXX with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    Your SAP Internet Communication Framework Team

    Hi,
      this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
      However for some ABAP web dynpro ( for some application XRPM ) I get  some peculiar error. Please see below and if you could think of anything out of these.
    I have already checked and found the both HTTP and SMTP services are working fine.
    The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
    The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
    Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP

Maybe you are looking for