This device cannot start. (Code 10): is the message i get on my Pavilion Dv7-

There is a yellow tag on the Ads Instant HDTC PCI in the device manager. when I check the details I recieve this message:
This device cannot start. (Code 10)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
When I check fr solutions it says this device is installed properly.. Can anyone help?

Right click on it select uninstall >> clcik on Action > scan for hardware changes. >> drivers will be reinstalled >> restart the PC
if you have internet connection then right click on it and select update drivers.
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Similar Messages

  • Satellite Pro A10: New Atheros/Askey WLan card but 'This device cannot start' code 10

    Hi there,
    I have a Satellite Pro A10 and have purchased an internal mini pci wireless adapter. The following information is displayed on my card:
    Askey WLL3070-D4(MOW)
    Atheros AR5BRB-43
    I installed the card, hooked up the ariel's and turned the laptop on...the switch at the front now lights up and windows xp finds the new ethernet adaptor. My problem is this...
    No matter what driver i install (and ive tried every Askey/Atheros etc driver from the first 20+ pages of yahoo/google) the card installs fine but then in device manager has a yellow ! next to it and says This device cannot start (code 10)
    I'm really stumped. I have some more ram coming in a few days at which point i shall be installng Vista which im hoping sorts my problems out but does anyone have any ideas?
    I've yet to find a driver which specifically refers to the AR5BRB or the model number WLL3070-D4.
    Does anyone have a location for a driver etc?
    thank you

    Hi
    I use always this page for WLan driver update:
    http://aps.toshiba-tro.de/wlan/
    This is a Toshiba WLan driver portal and there you can find all necessary WLan drivers
    Ciao

  • Intel Management Engine Interface, Device status: This device cannot start (Code 10).

    hi Tec,
    Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
    Issue: my computer auto restart after 2 hours please resolved the issue
    Logs captured from System summary:
    [Problem Devices]
    Device  PNP Device ID   Error Code         
    Intel(R) Management Engine Interface
    PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.               
    Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled. 

    Hi Jeenny,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
    You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
    Hope this helps. Do post back if issue persists!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Xfi titanium hd. This device cannot start. (code 10)

    I bought the titanium hd in october andf have been hapily using it until last week.
    I was playing a game and it crashed to desktop?and there was a pop up error about driver didnt install successfully, the driver was already installed when i installed the card the first day.
    Then i noticed i had no sound so i cleared the drivers and reinstalled from disk, but still had no sound, i went to device manager and it had excalmation and error.
    ?This device cannot start. (code 10)
    At this point i cleared drivers and tried different pcie slots but still the same, as a last resort i tried a complete fresh install of windows 7, installed card got same windows error about install, i then installed the drivers from disk and it still is unfixed no sound and, This device cannot start. (code 10) error.
    System specs
    i7 920
    evga 4way classified x58
    dominator ram
    2 evga gtx 580s
    500w psu
    win 7 64bit.
    I really hope someone can help so i dont have the hasle of rma.
    Thanks

    Ok update last night instead of clear cmos i removed bios battery to see if that could help, it didnt, so i then installed vista 64 just to check it, and i get same error.
    So back on win7 i installed drivers as before and it lets me from disk but when it comes to driver update it says no craeti've products detected or something very simlar. i get same erro if i try and install the beta driver.
    Squall thanks for the suggestion but that also didnt help, i do remember though i had been benhmarking the afternoon it died?and had increased my ioh voltage to .25v which isnt much.
    I thought at first id damaged one of my pcie slots but i checked my gpus in all 7 pcie slots and they work fine.
    Looking at the net i see that there are lots of other people running into this error and not just with sound card but usb devices and such, so it gives me hope that the cards not bad.
    Any more suuggestions would be good,
    Other things i've tried is remove the device from device manager and retry, along with uninstall device.
    Thanks

  • U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

    U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
    Picture link (hosted on photobucket.com)
    I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
    I tried to uninstall this and let windows update install it again => not worked, same problem.
    I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
    And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

    What kind of reinmstall did you perform?  If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed.  Your list will be different than the following one, but this is only an example. 

  • Audigy 2 value "This device cannot start (code 10) after installation and no so

    after installing this card I get a "This device cannot start (Code 0)" message in device manager. I disabled the onboard sound in the bios, installed using the CD and rebooted the computer. But still no sound. When using this method on another computer the installation went smoothly. Since it was still not installing on this computer I tried different PCI slots (keeping in mind that it is not suppose to be installed in the PCI slot adjacent to the AGP slot). I've tried everything I can think of and I still get a "This device cannot start (Code 0)" message under the driver in device manager and no sound whatsoever. Please help because if I can't get it to work I'll have to return it. Thank you.

    I did manage to get mine working finally, it was pretty stupid of me....
    Anyway I made sure the creative disk was in the dri've and then when my comptuer said "found new hardware" i pointed to the dri've and made it install the driver. Well that did work and it did say it installed the hardware, but it still didnt work. I then took it into my brother computer did it the exact same way and it worked fine. I finnaly brought it back to my PC and installed it one more time. it did the same exact thing. But this time i opened up the disk and installed the driver direct from the disk menu, after reboot it worked like a charm. Thought that was a tad strange, but it worked, maybe if someone makes the same mistake as me this will help.
    Card is good, not much of a step up from my li've 5., but that card is going in a friends PC so its no biggie.

  • Driver install with PXI 8360 Error " This device cannot start - Code 10"

    While trying to instal PXI-6541 in PXI-1036 chassi with PXI 8360 controller[express-8360 on laptop side] , getting the error message "This device cannot start [Code 10]" Laptop is Lenovo T60 with latest BIOS
    Thanks
    Manu 
    Solved!
    Go to Solution.

    Hello Manu,
    I'm sorry to hear that you are having so many issues with getting your Expresscard 8360 working on your Lenovo. I recommend that we first look into Device Manager in more details. You mentioned that there were question marks (?) on certain devices. This usually means that there are devices on your PC that do not have any associated hardware drivers. For the Expresscard 8360, the drivers should be native to the Windows system, so I am unsure if those "?" do belong to this portion of the system. We can test this out by removing the expresscard 8360 and see if the "?" are still present. These "?" can be from the internals of the PC or modules that you've attached. If you've restored your operating system recently, it could be from the peripherals of your computer in which case you will need to find and install the chipset drivers. This can also be from the modules that you in your chassis, assuming that you haven't installed the necessary drivers for them, in which case you can find them on the Driver CD you have.
    The exclamation mark (!) in Device Manager usually signifies a problem with getting the hardware started/operational. From your earlier posts I believe that the "!" is related to the Error Code 10 that you are receiving. Assuming that the correct power sequence was performed, chassis then PC, this is representative of a BIOS compatibility issue. Essentially this is occuring because the BIOS of the motherboard is not correctly allocating the necessary resources to all the devices as it is supposed to. Since you already have the latest BIOS, I would recommend that you try using the MXI Express Compatibility Software, here ni.com/beta. This is something that National Instruments created in order to correct for the incorrect resource allocation of the PC. It is not a beta program, it is only on the site so that we can manage it more easily. I have seen Lenovo T60 laptops work with this software installed.
    Let me know if this helps
    Thanks
    Can W.
    PXI and VXI Platform PSE
    National Instruments

  • Intel 82579V network controller "This device cannot start" (code 10) error"

    I've just finished installing a Z77A-GD55 motherboard and had a problem where the Intel 82579V network controller wouldn't start after a cold boot. Device manager would show “This device cannot start" (code 10) error”.
    After a reboot it would work every time. During the time it didn't work the adapter was incorrectly shown in device manager as 82579LM. There's an older thread about this issue but the fix described there were of no help with my problem.
    After a lot of searching I found Intel has provided a fix for people having this issue after sleep mode so I gave it a try and it seems to work for my issue too, so far anyway.
    So if anyone else is having this problem with the same Intel network controller I suggest giving this try.
    Go to the Intel Download Center and search for 82579V. Select the first result entitled "NVM Update Utility for Intel® 82579V Gigabit Ethernet PHY Network Connection" and follow the instructions. Good Luck!

    Thanks for the information. 

  • Zen 8G This device cannot start code 10 and firmware update problem

    I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
    I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
    If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • Network Adapters - This device cannot start (Code 10)

    Hello,
    I have a W510. It has worked OK for about 4 months. Started getting VERY SLOW - especially on start up.
    I ran the Uniblue Powersuite to try to speed things up. Didn't seem to help.
    I believe I have all the latest updates for both Lenovo and Windows 7 x64 Professional.
    My 2 USB ports located on the side of the laptop are suddenly not working. The device manager shows the following devices all with "This device cannot start (Code 10):
    - Renesas Electronics USB 3.0 Root Hub
    - Microsoft ISATAP Adapter
    - Microsoft Teredo Tunneling Adapter
    - Microsoft 6to4 Adapter
    It would not allow me to reinstall so I just deleted all 4 of these.
    When I did the reboot, they are all still missing, but the USB ports are now working (there is now a NEC Electronics USB Root Hub). I guess doing the job?
    But, I'm concerned about the other network adapters being missing.
    Additionally, today I plugged in my Apple iPod and now have the same (Code 10) on this device.
    Please help me. It looks like all the Microsoft and Apple drivers are using the same date and version file - it this strange?
    They all show 6/21/2006 version 6.1.7600.16385 - so what's up with this?
    Thank you so much!

    hey DTTODGG,
    since you have uninstalled the drivers under device manager, were you able to use the "update drivers" ?
    Anyway, is your system running on Win7 .. if it is, I believe that Win7 should have installed some generic drivers for you.
    Also could you check under the properties of your Network Adapter, is the device enabled ? If it isn't, enable it.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • This device cannot start (Code 10) with Rocksmith Realtone Cable (USB Audio)

    Hi there.
    Let me start off by saying that my problem is specific to only windows 8.1 64x and deals with usb devices. 
    My specs:
    Crucial MX100 ssd
    Win 8.1 Pro 64x
    MSI Gtx 970
    MSI Gaming 5 z97
    i7-4790k
    I'm trying to connect my Rocksmith Realtone cable (usb audio) to a usb port on my pc and whenI right click the "Usb audio device) in device manager, this pops up under properties. There is also a yellow exclamation mark on the device.
    This device cannot start. (Code 10)
    The I/O request was canceled."
    Now, like I said, this is only on win 8.1 64x. I installed win 7 64x on an older hdd and put it in my pc and the cable was recognized right away and was usable. I have tried:
    Manually uninstalling the device, and reinstalling
    Manually installing the device driver
    Formatted ssd and did a fresh install of win 8.1
    Tried it on win 7 with same pc and it worked fine
    Updated realtek drivers
    Updated Nvidia drivers
    Disabled xHCI in bios
    Disabled legacy usb support in dios
    Disabled eHCI in bios
    Enabled usb powered hubs in bios
    Disabled selected powering in power options + made a new high performance profile
    Here are photos of the problem
    http://puu.sh/gPfLJ/73044b5afe.png
    http://puu.sh/gPfNm/9e63769f7d.png
    Every other usb device I have/try works. I tested all my usb 2.0 and usb 3.0 ports and they all work with my mouse, keyboard, and flash drive.
    I'm not really sure where to go from here. I contacted Ubisoft (maker of the game Rocksmith) and they said it was a driver issue and I haven't received any more help. I'd really rather not need to dual boot win 7 and win 8.1 just to  use the cable. 

    Paul
    Given what the cable does and what device manager looks like it is a driver issue.  Their driver.  Your best bet is to contact the developer BUT I do wonder if you have tried re-installing the driver in compatibility mode for win 7
    To install in compatibility mode do the following:
    Right click the installer>properties>compatibility>choose OS
    http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows?SignedIn=1
    (works in vista, win 7, win 8, and win 10)
    Wanikiya and Dyami--Team Zigzag

  • Intel display audio says this device cannot start Code 10

    What is this code and how can it be corrected.  When I look at the device manager it says:  
    This device cannot start. (Code 10)
    STATUS_DEVICE_POWER_FAILURE
    Help

    A Code 10 error is generated in Device Manager in one of the following situations:
    - Device Manager can't start the device.
    - One of the drivers that the device needs does not start.
    - Device Manager has insufficient information to recognize the error that is bubbled up by the device driver.
    To resolve the issue follow troubleshooting steps given in below link
    https://support.microsoft.com/en-us/kb/943104

  • SB-Play "This device cannot start" Code 10

    My USB sound card (SB1140) has stopped working. Windows says that the driver can't start. I have uninstalled and reinstalled it, updated windows, deleted most "ghost" devices, tried reinstalling the driver in Safe Mode. Can anyone give me some direction on how to solve this - thanks!

    OK, I found a solution, the basis of which is here: http://pcsupport.about.com/od/findby...e-10-error.htm
    I had to uninstall several USB devices and let them reinstall themselves on reboot.

  • This device cannot start (code 10)

    Win 7 ipod classic 160 gig not being recognized by itunes. I went to properties and found the above message. Any help, please.

    Hi,
    Yeah, but i am not sure if your phone has got memory card, so that mass storage/data transfer can be used using cable.  Cable whichever you are using should be compatible with your pc and it should be genuine cable of Nokia.  CDMA devices are not discussed here often So i cant help you regarding this   May be you can check if any of your friend's has got laptop which has got infrared facility and you can copy from their pcs, if any

  • In device manager it says code 10 - this device cannot start (read message)

    In device manager next to the icon for pioneer DVD-RW DVR K17A Device it has a yellow ! triangle and when i click on it, it says this device cannot start code 10. I got the laptop in June and hadnt noticed the problem til now. When i followed instructions to possbily install updated drivers/software i did so but was told i am up to date.
    Thanks

    Hi,
    I had this exact problem yesterday. I suspect you're running Vista right? The other guy made a good point about saying what machine you've got and what OS you run, so I offer this advice with the disclaimer that I can't be 100 per cent sure it's your problem. However, I've had the exact same problem (referencing the "code 10") recently on my laptop which runs Vista. I called up support and they said there's a bunch of software, especially for things like MP3 players and digital cameras, which is compatible with vista +but+ causes the DVD / CD drive to stop working. He directed me to a page that talks you through a registry patch, which both he and the page itself advises is a little risky. That said, I did the patch and now the DVD / CD drive works. Or that is, it actually reads the DVD before citing some other reason why it can't be played (some worthless advice about reducing screen resolution and colour quality - haven't got any ideas about that have you?).
    Here is the address of the page with the registry patch:
    support.microsoft.com/kb/929461
    Again, I'm not a techie, I'm not at all expert about dealing with computer probs and since I don't know what OS you're running and on what machine I can't be sure this applies to you. But it seems like it does.

Maybe you are looking for