This disk doesn't contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.
As stated above. I get this when I try to resize my HD. Was having issues with BootCamp so I removed it and got this.
This disk doesn’t contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.
the same problem...
any help?
Similar Messages
-
"This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
Stick the disk in, reboot holding c.
Disk Utility is a menu option about the 2 or 3rd screen in the installer. (don't install OS X!)
Because your booted form the installer disk, you can repair the disk.
Quit and exit the installer and reboot.
If your drive is not repaired, make a note of all what it says, for Apple to use.
Reboot and get your files off to a external drive,
Take the note and your comptuer to Apple for a warranty/Apple care call, they will replace the drive. -
I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported. What does this mean, and how do I get back all my photos and fix this? thanks.
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know some details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
where is you library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
[SOLVED] UEFI doesn't "see" the 'EFI System' partition
My BIOS/UEFI stop from "see" the 'EFI System' partition, there's shellx64.efi and a gummiboot installation and when I try to launch the shell only get "Not found" message.
Here's the GPT:
$ sudo gdisk -l /dev/sda
GPT fdisk (gdisk) version 0.8.10
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sda: 625142448 sectors, 298.1 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 8700C28A-71B0-416A-971A-DDAD1961D56E
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 625142414
Partitions will be aligned on 2048-sector boundaries
Total free space is 2669 sectors (1.3 MiB)
Number Start (sector) End (sector) Size Code Name
1 2048 1640447 800.0 MiB EF00 EFI System
2 1640448 78815231 36.8 GiB 0700 Basic data partition
4 111316992 251867135 67.0 GiB 8300 Linux filesystem
5 251867136 253968383 1.0 GiB 8200
6 253968384 625141759 177.0 GiB 0700 Microsoft basic data
7 78815232 111316991 15.5 GiB 8300
File list:
$ ls /mnt/boot/efi
bootx64.efi EFI loader shellx64.efi
This happened after a unsuccessfully fedora's bootloader installation.
Last edited by hotvic (2015-02-23 00:34:34)I finally managed out what is the problem.
The problem is that Fedora Installer (anaconda) wrote the MBR code to disk. so the UEFI partition isn't read by BIOS (I think, not sure).
The solution for me was erase the protective-MBR:
# dd if=/dev/zero of=/dev/sda bs=512 count=1
and then fix the GPT:
# gdisk /dev/sda
## just type 'w' and confirm
after that reinstalled the gummiboot and voila
Thanks to all and sorry my very bad english. -
I'm running Lion on a 15" 500gb Spring 2011 MBP. Ran Disk Utility and got this message. Since I don't have an install disk for Lion, what do I do? Thanks!
P.S. I searched the database and all questions with this were pre-Lion.Restart your Mac and press command R.
This brings up the invisible Rescue/Install partition placed on your drive when Lion was installed.
Alternatively, you can hold down the Option Key at Startup and choose "Recovery HD".
In either case, proceed as if you had booted from a DVD, answer only the "What Language" question, but do NOT Install. Wait for the MenuBar to be drawn and choose Disk Utility from the Utilities menu. -
i have forgoten the answers to my security questions and does not have a resuce email and i donot want to loose the $15 giftcard i just put on there or any of my music by setting up a new accout and all i use to download items is giftcards. what should i do?
plarkin wrote:
should I do a full reset of TM (per the instructions at the link below) prior to setting up the TC?
I'd start by just selecting the new destination. Do the "full reset" if you have trouble with that.
do I need to set up the network portion first and then turn on TM?
That might make things easier.
even though my mini was previously only connected wirelessly to the old router, I plan to connect via Ethernet to the TC (for one thing, to make the initial backup run faster). Do I just turn AirPort settings off on the mini, or does that need to be on in order to setup the TC?
To assure that your first backup is over Ethernet I'd turn off AirPort until it's done. Check the order in the Network panel of System Preferences. I'd move the Ethernet connection item to the top of the list.
In other words, does the initial setup of the TC from my mini happen wirelessly or over Ethernet?
Either way should work fine.
I currently have a networked printer conneceted to my old router, which I will connect via Ethernet to the TC. Can I assume that, once I have set up all of my family's PCs/Macs/iDevices on the newly-established TC network, that I will have to re-establish connection to the printer as well?
Not necessarily. I'd only do that if the printer isn't available after the switchover.
I would like to reformat the second external drive (the one previously being used for TM backups) for possible reuse with another computer. Can I simply reconnect this to my mini and reformat?
That's what I'd do.
is TM going to see it and try to back it up?
If you've already reconfigured Time Machine to use the Time Capsule drive, there shouldn't be a problem. -
Using attribute as a set of data and parsing this data
Hi everyone,
I present below a (little) challenge with the use of attributes in XQuery. Consider the following XML document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Each client of the showroom is identified by a unique Id (e.g., 1,2,3,....). Then, i want to add some data to my XML document which should represent, for each car, the set of all clients' Id that have rented this car.
The desired XML document could look like this:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
+*<history>*+
+*<client id="2"/>*+
+*<client id="23"/>*+
+*</history>*+
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
+*<history>*+
+*<client id="56"/>*+
+*</history>*+
</car>
</showroom>
However, by using elements in order to represent the rental historic, the document's size will increase significantly.
As i use only the clients' id, are there any way to represent the history data using only attributes ?+.
In the following document, the clients' id are represented, as a set, through the attribute +@history+:
<showroom>
<car id="1" history="2,23">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n" history="56">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
However, are there any way to check if a given car of id='x' has been rented by a client of Id='y' ?+.
Does someone know how to represent the history data (sequence of clients' id), using only attributes, and how to look for a given client's id as explained above ?
Please suggest. I appreciate your help.The two following documents represent examples of the showroom data and the clients' data respectively:
First document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Second document:
<clients>
<client id="2">
<name>...</name>
<firstname>...</firstname>
<driverLicence serialNumber="2156311"/>
</client>
</clients>
The DTDs of these documents are defined as follows:
The showroom DTD:
<!ELEMENT showroom (car)*>
<!ELEMENT car (name,family)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT family (#PCDATA)>
<!ELEMENT N3 (#PCDATA)>
<!ATTLIST car id ID #REQUIRED>
The clients DTD:
<!ELEMENT clients (client)*>
<!ELEMENT client (name,firstname,driverLicence)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT firstname (#PCDATA)>
<!ELEMENT driverLicence EMPTY>
<!ATTLIST client id ID #REQUIRED>
<!ATTLIST driverLicence serialNumber ID #REQUIRED>
Whenever a car is rented, I must add some information either in the same showroom document (it will be better for me) or in another document which relies rented car id with the id of the client which rented this car.
Thanks in advance for your help. -
I tried to change the metadata date. It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
Unable to change original file. Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
Wassup?What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
Regards
Léonie -
Hi,
I hope the community could advise me on the following challenge.
So I'm looking to produce hundreds of personalised videos. Filming them all sounds daunting enough but editing them all sounds a nightmare so I'm wondering if there is any form of automation that can help me do the following:
VIDEO CLIP #1a - "Dear John thank you for watching this video, I'd like to explain how our services can help John Ltd" - specific to individual so hundreds of these edited, only a few seconds in length.
VIDEO CLIP #1b - "Dear Dave thank you for watching this video, I'd like to explain how our services can help Dave Ltd" - same again
VIDEO CLIP #2 - "We have a range of options that suit...." and so forth - Generic video, not specific to individual.
How do I merge #1a and #2 to make one file, then #1b and #2 to make another, hundreds of times. So the end result is hundreds of individual video files?
Is this possible?
Running Adobe After Effects CC v13.0.2.3
Thanks
Alistair.Let me start by saying that it is entirely possible that this is an editing job as Dave LaRonde and Szalam have said. But I have a thought I would like to pass along.
It's possible to use expressions to read Comp and Layer names as well as arrays inside the expressions. This solution allows you to set up the Final Pitch Video and then have the text change dynamically as you duplicate it for what you described as 1a, 1b, 1c, etc . Create a folder for your final pitch videos and make a new comp named something like "Final Pitch Video 1".
Create a precomposition with your Video #2 content in outside the Finals folder. Then layout your Final Pitch Video 1 comp as follows:
1) Intro Text Layers with all the animation first (Make sure to have a separate layer for Name and Business)
2) Then add the Video #2 Precomp (Leave this as a precomp so you can edit it at any point and not have to replace it in your hundreds of videos) If this is just a video clip, you don't necessarily need to us a precomp. I'm just guessing you'll want to be able to easily update it at some point in the future.
After you have your text layout and your separate layers for Name and Business, put these expressions on your Name layer in the Source Text expression field:
// NAMES LAYER
try {
compName = thisComp.name;
compNum = compName.substr(compName.length -1, 1);
theNames = ["blank", "Bill Jones", "Tom Riddle", "Frank Frankenstein", "etc."]; // Add your names here
theNames[compNum]
} catch(err) {
"No More Entries"
And then on the Business Text Layer in the Source Text expression field:
// BUSINESS LAYER
try {
compName = thisComp.name;
compNum = compName.substr(compName.length -1, 1);
theBusiness = ["blank", "Jones Construction", "AA Plumbing", "Frank's Hot Dogs", "etc."]; // Add your businessess here
theBusiness[compNum];
} catch(err) {
"No More Entries"
At this point the name and business text layers use the comp number to read the arrays for each text layer. For example:
The text layers would work this way each time you duplicate the Final Pitch Video. Either start with "Final Pitch Video 0" or leave the first place in the array "blank" since arrays start counting at zero.
COMP NAME Name from Array Business from Array
Final Pitch Video 1 Bill Jones Jones Construction
Final Pitch Video 2 Tom Riddle AA Plumbing
Final Pitch Video 3 Frank Frankenstein Frank's Hot Dogs
Final Pitch Video 10 No More Entries No More Entries
Let me know if you have any questions on this! I don't know your exact situation, but I hope it helps.
Cheers,
Trent -
I have a boot disk that needs repair and I would like to know the correct way to repair this disk using another install disc. I guess there is an issue with the volume free block count.
Please advise.
Thanks.Insert/connect that disk if needed, start up with the Option key held down, tab to it, and press Enter. If it's a Mac OS X install DVD, choose Disk Utility from the Utilities menu. If it's a different Mac OS X installation, open the Disk Utility in the /Applications/Utilities/ folder. Repair the drive.
(61964) -
I want to buy an app but I can only pay with my eftpos card but it doesn't come up when I try and buy the app, so if I can use my eftpos card how?
no
-
I need to have full path of file when file get uploaded (using EXTjs).
Due to security reason in firefox, it just show file name.
Is it possible to make it work setting any properties in about:config.See comments 49 and 50
* [https://bugzilla.mozilla.org/show_bug.cgi?id=143220 Bug 143220] - [FIX]Script can get the value of a file control, including the path -
I tried to update my browser from 3.6 to4.0. On restarting the computer I found I could no longer connect to the internet. I then connected to the internet using Internet Explorer and removed the mozilla browser and reinstall Mozilla firefox 4.0. Again the browser using this updated version didn't work. So reinstalled Mozilla firefox 3.6 and it worked.
It appearsMozilla firefox 4.0 has a problem.
My operating system is Windows XP pro.Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only -
Date stripping flaw - Auto-detection of dates and 'today' 'this friday' etc
I like the new feature that auto strips dates from emails and allows you to automatically jump to that point in iCal, however why does it not work based on the date of the email rather than the date of the operation? If an email says tomorrow and it arrived yesterday then why when you select `Show this Date in iCal' does it not highlight today? I don't want it to show me tomorrow for today, I want tomorrow for yesterday.
In other words, you need to sort out your indexical term handling.
Best,
PossessionPlease can anyone give me any ideas as to why my runs
from last Friday and today are recorded as having
taken place on 1 Jan 00 and 6 Jan 00 respectively.
Are you saying these were listed this way in your run history on the Nano? Or did you notice this only after you uploaded to Nike+?
It makes a difference in trouble-shooting the problem.
I don't know if this has any bearing, but these two
runs were performed in the gym on a treadmill.
Can't imagine how that could create a problem with the date.
In the end I detelted all runs from Nike+ and my Ipod
and I am going to start again,
Schmunkee, have you actually done any more runs since this happened? If you follow the instructions in the thread I posted for you, you can see the date on each xml file and also see the dates contained in the xml files. Check them before you try to post them to Nike+.
If this happens again, come back to forum. There are plenty of people here willing to help. -
Did the windows 10 download then went back to windows 8 and got this error.
Error: no boot disk has been detected or the disk has failed. Does this have anything to do with windows 10? or was it just coincedence that the hard drive is failing? Also anyone thinking of going to windows 10, please wait because its got a ton of bugs.
Which method did you use to return the OS to Windows 8? I have'nt done it yet, but a colleague has and he did not report any issues with his Omen 15 product loan.
Maybe you are looking for
-
ITunes 32 bit on 64 bit Windows 7?
Why is it that I cannot install iTunes 32bit on a 64 bit Windows 7 system? I've never had a 32bit program reject my attempt to install it on a 64 bit system before; what's different?
-
SAP Query: Display Selection Fields in the header page of Basic list
Hello, I have to display the selection fields in the header page of the basic list and statistics in a SAP Query. I know the usage of short names for fields in the header page, but this doesn't work for the selection fields. How can I display the sel
-
How to migrate reports from Development QA Production environment
Hello, we have 3 Oracle Discoverer 10.1.2.3 environments and I would like to know what is the correct way to migrate reports from DEV to QA and to PROD. I'm researching about this by a couple of days and didn't find anything handy. The most likely wa
-
Need a global Logger for various packages
I want to create a global Logger object like MyLogger that will be used by a few packages. The Logger should generate logging files in diferent packages. I hope MyLogger is so easy to use that other programmers just need to type one line to log a tex
-
How to remove black spot in ipod touch 5?
Please Help me!!!!!!