This error is often caused by incorrect use of the "Strict" document type
Okay...so I have 6 errors - all the same and has to do with my document type.
I've searched the code and I am using a transitional doc type so why the errors?
http://02cada7.netsolhost.com/Stasik_Family_Website/index.html
Yeah I did that...but the cause doesn't make sense to me.
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
I'm not using a strict document time - I am using transitional and I am not using proprietary extensions.
Similar Messages
-
I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20: <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21: </httpHandlers>
Line 22: <authentication mode="Forms">
Line 23: <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24: </authentication>Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen -
Gettign this error when trying to access webpage using JRE V 1.4.2_06
Gettign this error when trying to access webpage using JRE V 1.4.2_06
Any suggestions?
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
load: class com.adp.e.hrclient.Client.class not found.
java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:) -
Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002
- TimeCreated
[ SystemTime] 2012-02-01T00:02:48.677610900Z
EventRecordID 8270
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer LR8K6TLC.cntr.thrivent.corp
- Security
[ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots. I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you. -
I have this error message:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleACPIPlatform.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
Please help. Is there a update or how do I reinstall?
Thanks,
JohnI submitted the above question, later finding that it has been answered by Buller already. No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
Jim -
Keep getting this error when ever I try to use the CC_2014
keep getting this error when ever I try to use the CC_2014 InDesign
Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders. Ensure that you have appropriate permissions and then restart Adobe InDesign.
Also have Ai quit out on me in the CC_2014.
This is very frustration since I use these the mostFor MAC try to give permissions to Adobe Indesign Folder:
Users/[user]/Library/Caches/Adobe InDesign
Users/[user]/Library/Preferences/Adobe InDesign
Access hidden user library files | Mac OS 10.7 and later
For Windows try to give permissions to Adobe Indesign Folder:
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
Also you can try logging in under a local administrator account as suggested by jeff. -
Hi!
I can not go to ITunes. An error. It says: This Apple ID has not yet been used with the iTunes Store.
What to do?Go view your account and make sure you have a valid payment method in your account.
-
Why I cant use my apple id? error was this apple id has not yet been used in the iTunes store
why I cant use my apple id? error was this apple id has not yet been used in the iTunes store
Log into your account and verify that you have a valid payment method.
-
Error "this apple id has not yet been used with the itunes store" when login from itune
when i go to itune and login via apple id there is error "this apple id has not yet been used with the itunes store"
how i can solve it..I'm having the exact same issue as the two of you. I linked my paypal, I made a whole new Id, nothing works. I've emailed the support team @ Express Lane, and I'm waiting to hear from them. Have either of you gotten help with this issue?
-
ORA-13207: incorrect use of the [More than 2D not supported] operator
Oracle 8.1.7.4:
The same query works in an Oracle DB on Linux and Windows, but in a Solaris it gives me the following error:
cc_redes_met_coaxial@ORAG2> SELECT lot_f.lot_id id,
ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
FROM lot_f,
pedestal_f,
G_GEOMETRY_0 lot_geom,
2 G_GEOMETRY_0 ped_geom
WHERE lot_f.feat_num = lot_geom.feat_num
3 AND pedestal_f.acc_point_id = 611
AND pedestal_f.feat_num = ped_geom.feat_num
4 AND lot_f.g_version+0 = 0
AND (lot_f.g_next_version > 0 OR lot_f.g_next_version IS NULL)
5 AND pedestal_f.g_version+0 = 0
6 AND (pedestal_f.g_next_version > 0 OR pedestal_f.g_next_version IS NULL)
AND MDSYS.SDO_WITHIN_DISTANCE(lot_geom.geometry, ped_geom.geometry,'distance = 100' ) = 'TRUE';
7 8 9 10 11 12 13 14 SELECT lot_f.lot_id id,
ERROR at line 1:
ORA-29902: error in executing ODCIIndexStart() routine
ORA-13207: incorrect use of the [More than 2D not supported] operator
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 84
ORA-06512: at line 1
The data is in 3D. I took a look at the trace file but no useful information. It does not have to be 2d, right?
I can use SDO_WITHIN_DISTANCE with data in 3d, can't I?
Does anyone know what is going on? Maybe a bug?
Regards,
AlexDaniel,
I created the spatial index in 2d, but if I collect stats on all tables the optimizer doesn't use the spatial index.
I tried to influence the optimizer using hints, but it seems to ignore the hint clause. The query I did is above:
SELECT /*+ INDEX(lot_geom G_GEOMETRY_0_SI) INDEX(ped_geom G_GEOMETRY_0_SI) */
lot_f.lot_id id,
ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
FROM lot_f,
pedestal_f,
G_GEOMETRY_0 lot_geom,
G_GEOMETRY_0 ped_geom
WHERE lot_f.feat_num = lot_geom.feat_num
AND pedestal_f.acc_point_id = 611
AND pedestal_f.feat_num = ped_geom.feat_num
AND lot_f.g_version+0 = 0
AND (lot_f.g_next_version > 0 OR lot_f.g_next_version IS NULL)
AND pedestal_f.g_version+0 = 0
AND (pedestal_f.g_next_version > 0 OR pedestal_f.g_next_version IS NULL)
AND MDSYS.SDO_WITHIN_DISTANCE(lot_geom.geometry, ped_geom.geometry,
'distance = 100' ) = 'TRUE';
So I "forced" a plan that uses the spatial indexes deleting the statistics from the tables that have geometry columns. The execution plan looks like this:
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=2652 Card=10182 Bytes=79969428)
1 0 CONCATENATION
2 1 NESTED LOOPS (Cost=876 Card=3428 Bytes=26923512)
3 2 NESTED LOOPS (Cost=121 Card=1078 Bytes=8450442)
4 3 NESTED LOOPS (Cost=4 Card=33 Bytes=129492)
5 4 TABLE ACCESS (FULL) OF 'PEDESTAL_F' (Cost=1 Card=1 Bytes=16)
6 4 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=3 Card=3268 Bytes=12771344)
7 6 INDEX (RANGE SCAN) OF 'G_GEOMETRY_0_PRIMARY' (UNIQUE) (Cost=2 Card=3268)
8 3 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=121 Card=3268 Bytes=12794220)
9 8 DOMAIN INDEX OF 'G_GEOMETRY_0_SI' (Cost=51)
10 2 TABLE ACCESS (BY INDEX ROWID) OF 'LOT_F' (Cost=1 Card=318 Bytes=4770)
11 10 INDEX (RANGE SCAN) OF 'GI_LOT_F0_FEAT_NUM_0' (UNIQUE) (Cost=1 Card=318)
12 1 NESTED LOOPS (Cost=876 Card=3428 Bytes=26923512)
13 12 NESTED LOOPS (Cost=121 Card=1078 Bytes=8450442)
14 13 NESTED LOOPS (Cost=4 Card=33 Bytes=129492)
15 14 TABLE ACCESS (FULL) OF 'PEDESTAL_F' (Cost=1 Card=1 Bytes=16)
16 14 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=3 Card=3268 Bytes=12771344)
17 16 INDEX (RANGE SCAN) OF 'G_GEOMETRY_0_PRIMARY' (UNIQUE) (Cost=2 Card=3268)
18 13 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=121 Card=3268 Bytes=12794220)
19 18 DOMAIN INDEX OF 'G_GEOMETRY_0_SI' (Cost=51)
20 12 TABLE ACCESS (BY INDEX ROWID) OF 'LOT_F' (Cost=1 Card=318 Bytes=4770)
21 20 INDEX (RANGE SCAN) OF 'GI_LOT_F0_FEAT_NUM_0' (UNIQUE) (Cost=1 Card=318)
But when I executed the query, I got:
cc_redes_met_coaxial@ORAG2> /
ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
ERROR at line 2:
ORA-03113: end-of-file on communication channel
Collecting stats on geometry tables makes the query work only because it doesn't use the spatial index.
I took a look the trace file, but I didn't see any interesting information. I can send you if you want.
Do you have any clue?
Regards,
Alex -
I applied and received an upgrade code to Redeem Mountain Lion for my new MBP.
I get this message when I try to Sign in to the App Store after entering the redemption content code, and also if I just try to "Sign In". The first part of the error is true - I haven't used the AppleID with the iTunes store.
I received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
I also tried to re-create this appleID...(it was one suggestion I saw for this issue) It doesn't let me since the ID already exists...
The error is:
"This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue. Cookies must be enabled if you want to create or edit.. etc."
It's clearly not a cookie issue.. Stuck...The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here: ~/Library/Cookies
Click Go the move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the App Store. -
what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"
It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian -
Tyring to sign in to iTunes store viz windows XP...I get to entering my ID and PWD and then the message pops up "This Apple ID has not yet been used with the iTunes store...please review acct. info." HELP! I have cleared DNS, checked proper date & time and deleted SC folder from programs like support suggested--all to no avail.
The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here: ~/Library/Cookies
Click Go the move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the App Store. -
This apple id has not yet been used in the iTunes store
hello
when I want install free program with my iphone in app store ,It's want id apple . I had old id but I sing out and create new id and verifying, but in iphone ,when I sing in with new id, I get this error (this apple id has not yet been used in the iTunes store.)
now old and new id apple don't working .I want to use new apple id . please help me.
Thank you.
I have iphone 4s modem firmware: 2.0.12
Model :MD325B version: 5.1.1
new apple id: [email protected]On the iPod go to Settings>Store and tap on your Apple ID and and then tap on View Account.. Then exit and then purchase what you want. It wants yo to review you payment information.
-
my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?
There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.
Maybe you are looking for
-
I'm having trouble creating a link to a word doc on my computer. I select "enable as hyperlink" and then "Link to file". I select the the word doc on my computer. It didn't create a link to the file. Hmmmm... then I tried it with a pdf. Still no link
-
The Application Manager doesn't install
The Application Manager doesn't install
-
Error updating adobe download assistant from version 1.0.6 to 1.2.9
i am getting an error updated adobe download assistant from version 1.0.6 to 1.2.9. "The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support applicatio
-
I was once messing around and sent an extremely long message to someone. iMessage was not working so I tried shutting it off and on, force restarting it, and force quitting the app but when I try to open it it opens, shows none of my conversations an
-
Can you export whole folders with meta data in tact
Can you export folders or groups of photos including all the meta data eg keywords, gps etc to a new folder? I then could copy these to my xbox for viewing for example? cheers