This is in regards to the os x Maverick update.

when i tried to log in the keychain box appeared and asked for my login password. from my memory i have never set up the keychain. how do i remove this box if the cancel button is not allowing me to do so?

Well, this isn't a download window, it's an installer window. You need to select one of your hard drive volumes on which to install Lion.
Your computer's main drive apparently has been used by you for TM backups which is a first class "no no." See: OS X v10.6, OS X Lion- Cannot install Mac OS X v10.6 or later on a volume used by Time Machine for backups.

Similar Messages

Each time my iMac reboots i am prompted to enter my FaceTime password. This just started occurring after the most recent security update.

Each time my iMac reboots I am prompted to enter my FaceTime password. This just started occurring after the most recent security update. When I put my password in the pop up just comes back, if I press cancle it goes away. Any ideas on how to get rid of this annoying popup?

I had the same problem. Try this. Launch FaceTime. Click the toggle to turn it off; or Command-K. Quit. Do a restart, you shouldn't get the popup. You could then turn FaceTime back on if you wish. Either way, the popup should be gone from then on.

IPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

iPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

you have two kickers in there.
Cheers
Pete

Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop

Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop
Please help

It is a folder which I have created. Name is "SAP".
I copied some of my office stuff and then deleted the contents inside the folder. But I couldnt delete the folder SAP.
This is happening after the Mavericks update.

Microsoft Word 2008 refuses to work for me after installing the most recent Mavericks update, 10.9.1. It is 2008, yet Excel and Powerpoint work just fine. Help!

Microsoft Word 2008 refuses to work for me after installing the most recent Mavericks update, 10.9.1. It is 2008, yet Excel and Powerpoint work just fine. Help!

I suggest you do one of two things:
1. Upgrade to Office 2011 for OS X.
2. Try the freeware, Libre Office.

Regarding Maps: The directions don't update as I'm driving

I was testing out the maps feature on the iPhone early, and I'm not sure if I have the wrong settings or if this feature isn't available on the iPhone.
What I'm trying to figure out is if the directions can automatically update when I'm driving. While driving earlier I set my route and whenever I passed the next step on the directions (i.e., if it said "Merge onto 101 S" and I did that) I would just hit the right arrow to move onto the next direction. Is there a way to make this automatic?

Google maps really isn't a navigation program with turn by turn controls. I've used it to find some place that wasn't on my car's nav system, but as you figured out, it was challenging.
I think Tom Tom has an app that will be out soon to function as a navigation system that will do what you want.

Why mi Macbook Pro doesn't want to recognize my WD Passport after the OS X Mavericks update

Hello, when I bought my macbook pro in 2009, everything was good, now when I did the upgrade to get Mavericks, my WD Passport is not recognize, what can I do?

WD has worked very hard to make their drives incompatible with Mavericks:
The drives come with software on the drive which is incompatible.
The drives come with incompatible software (the humorously named WD SmartWare) which they want you to install on your mac, to run the drive with the incompatible software already on it.
In addition to being incompatible, this software is unnecessary in the first place.
WD didn't stop there: in some cases WD drives have firmware in the hard drive enclosure which is also incompatible with Mavericks.
I'd try:
hopefully you have the data on the drive backed up somewhere else.
reformat (erase) the drive with disk utility if you can.
uninstall the WD software on your Mac
research the drive to see if it is one of the ones with the incompatible firmware. If it is:
If you trust WD (I wouldn't), see if they have a firmware update.
Otherwise, remove the drive from the enclosure and put it in another (non-WD) enclosure.
Or if you can return it for a refund, do that.

My iphone was working fine this morning after I did the iOS 7.3 update but I just took a call and now it's completely shut off and won't turn back on. Coincidence?

My boyfriend and I both have iphone4's and we both did the 7.3 update this morning. My phone is still working properly but his just shut off after he'd taken a call and now he can't get it to turn back on. Coincidence? He's not dropped it or gotten it wet and he literally had just hung up from talking to me when it stopped working.
Anyone else having issues? Thoughts?
Thanks!

NO, but he can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

Does this wiiu deluxe come with the latest 1gb system update pre installed?

I ask because internet is slow and the zombiu bundle has 1gb system update pre intsalled....

It probably depends on how long the Wii U you're buying has been sitting at the store.

Okay so this marks 4 months of the 5.0.1 update affecting my Iphones battery when will this be fixed?

When will it be fixed?

There is no way to knw such a thing.
Have you tried a restore?

Anyone else having problems with the new Mac Mavericks update? I get static sound at random times now?

Macbook 2009 does static sound on google chrome and so does my mac desktop. This is all started under Mavericks 10.9.2 for me.

Nevermind I fixed it. Atleast I think I did, I just set my audio to 24-bit and 9600khz or whatever its called and it sounds clear now. At least I hope that fixed the problem.

Suitcase Fusion won't open after installing the 10.5.8 update - Solution

This is a bit of an open and shut post as I've found the solution, but it's a bit obscure so thought I'd stick it up here in case anyone else had this problem.
After installing the 10.5.8 update, Suitcase Fusion (am using v12.1.7) would bounce once in the dock and then abort. I called Applecare (who had surprisingly not heard of this Application) and they suggested moving the com.extensis.suitcase.plist preferences file to the desktop and restarting my Mac (essentially resetting Suitcase Fusion).
No joy.
I didn't feel that re-installing Suitcase Fusion was going to do any good, so said thank you and went back to scouring Google …and lo, the solution was there all along…
The problem had something to do with the *Bonjour Name* of my Mac. Apparently, if you have any special characters in your *Computer Name* or if it exceeds 20 characters, then this causes a problem with the *Bonjour Name* and then consequently with Suitcase Fusion …simples.
See? …told you it was obscure.
Solution:
1. Open *System Preferences > Sharing*
2. Change the *Computer Name* to something shorter with no spaces or special characters, something like MyName-MacBookPro
(NB. If you're not logged in as an Admin user, you'll need to click the lock and enter a password first)
3. Click Edit… to ensure that the .local name is the same
4. Close *System Preferences* and restart your Mac
And Bob's your Uncle, that should do the trick :o)

That may be, but I didn't find it without considerable digging. And neither Applecare nor Extensis had heard of the problem/solution.
Just thought it would be helpful, that's all.

Anybody have issues with the iTunes 7.1 update and Logic?

Scenerio:
Working happily in Logic Pro. Software Update appears with available updates to iTunes and Quicktime. I needed a break from editing, so I accpeted the update.
Immediately relaunched Logic Pro and at the Updating the Tree stage my machine freezes, with the following message appearing in four languages:
"You need to restart you computer. Hold down the Power button for several seconds or press the restart button."
Chances are overwhelming that this is directly related to the 2 updates, with the iTunes update being the likely culprit, in my opinion
I repaired permissions which had no effect.
What should I try next?

Hi,
MacFixit has reports from several readers reporting Kernel panics after updating:
Kernel panics after updating Some users are reporting kernel panics that appear after installing QuickTime 7.1.5.
MacFixIt reader Ian Soper writes:
"I had a kernel panic this morning after I installed the itunes and quicktime updates that apple released last night. Last night after installing the updates I shut my machine down and then this morning I powered it up and got a kernel panic (gray screen with various languages telling me how to power down my computer). I don't think there was anything else that I did to my computer last night that could have affected this."
If you are experiencing similar issues, you may want to investigate some of the solutions listed in our tutorial "Avoiding and eliminating Kernel panics."
Go to the website and follow the link attached to the text "Avoiding and eliminating Kernel panics."
http://www.macfixit.com/
Hope this helps
ciro

Just installed the new Brother printer updates through software update

Now both of my printers say:
"You need to install software to use this printer. To install the software, choose Software Update from the Apple menu. If the software for your printer isn’t available in Software Update, contact the manufacturer of your printer."
Tried rebooting and re-running software update. Everything is up to date but no change. Still no printing.

Dinking around with it for an hour, I came up with another solution also. Go to System Preferences>Print & Scan click the Options & Supplies button, click the Driver tab at the top, and reselect the correct driver for the printer.
It looks like the generic CUPS driver has been replaced by drivers called "Brother mmmmmm CUPS" where mmmmmm is the printer model, like MFC-7820N. Automatic software updates are not always automatic I guess.

Hi, i am having an issue with a basic motion scroll effect. I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me-, probably he didn't unde

Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki Lapan

Thank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!!

This is in regards to the os x Maverick update.

Similar Messages

Maybe you are looking for