This is regarding the needs to implement VF04 and additonal functionality

Hi..
i have to implement new report with vf04 and some additional functionality in one report..
Kindly advise how i have to proceed ..
1. I have tried initally submit the VFO4 program and tried to capture the output data of the VF04 program
2. Iam unable to capture the output data  of VF04..in this i have get empty records ..
For this i have done code like this:
DATA: list_tab TYPE TABLE OF abaplist,
DATA   : itab type  vkdfif OCCURS 0 WITH HEADER LINE.
ata:lf_datum type sy-datum.
    lf_datum = sy-datum - 1.
  submit SDBILLDL   WITH p_fkdat  EQ  lf_datum
    EXPORTING LIST TO MEMORY
                   AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
  TABLES
    listobject = list_tab
  EXCEPTIONS
    not_found  = 1
    OTHERS     = 2.
    CALL FUNCTION 'LIST_TO_ASCI'
      TABLES
        listasci           = itab
        listobject         = list_tab
      EXCEPTIONS
        empty_list         = 1
        list_index_invalid = 2
        OTHERS             = 3.
LOOP AT itab .
write:/ itab.
ENDLOOP.
Thanks & Regards
RameshManne

hi..
This is actual requirement for me ...
Billing due list
Compare report output with results of tx. VF04 (billing due list for blocked sales orders).
Take in account the additional selection variables this report offers in comparison to tx. VF04.
Blocked invoice list
Compare report output with results of tx. V23 (Sales documents blocked for Billing) and VKM3 (Sales documents with a blocking credit status).
Take in account the additional selection variables this report offers in comparison to tx. V23 and VKM3.
if i submit with with out return it will display the VF04 output screen initially.
i want display VF04 and other additional functionality at a time.
Thanks & Regards
RameshManne

Similar Messages

  • With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

  • How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

    How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

    I suspected you used the eye icon on the timeline to hide the message, but that one has no impact whatsoever on the published version. It is only meant to be used for editing reasons on the stage, to hide objects temporarily on a crowded stage. It is confusing, certainly in CP8 where for both instances the same eye icon is used. In previous versions the Properties panel had a checkbox for 'Show in Output', which was IMO much clearer than this eye icon. But of course, that is only my personal opinion.

  • I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled.  Is there something I can do to clear this?  4 people in 4 different states that called me all said the same thing.

    I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled.  Is there something I can do to clear this?  4 people in 4 different states that called me all said the same thing.

    Settings > General > Reset > Reset Network Settings
    Contact the carrier to troubleshoot.

  • Query regarding the Node manager configuration(WLS and OAM Managed server)

    Query regarding the Node manager configuration(WLS and OAM Managed server):
    1) In the nodemanager.properties I have added the ListenAddress:myMachineName and ListenPort: 5556
    My setup : One physical Linux machine(myMachineName) has : WLS admin server, managed server(OAM 11G) and nodemanager.No clustered environment.
    2) nodemanager.log has the following exception when I start the oam_server1 using EM(Enterprise Manager11g):
    Mar 23 2012 1:39:55 AM> <SEVERE> <Fatal error in node manager server>
    java.net.BindException: Address already in use
    at java.net.PlainSocketImpl.socketBind(Native Method)
    at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:336)
    at java.net.ServerSocket.bind(ServerSocket.java:336)
    at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
    at java.net.ServerSocket.<init>(ServerSocket.java:202)
    at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:125)
    at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
    at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unknown Source)
    Default port on which node manager listen for requests is localhost:5556.I have changed it to point to my machine. The port should be of WLS admin server or it should be the managed server port?
    3) I have started the NodeManager using the startNodeManager.sh script.
    4) The admin server port is 7001 and the oam managed server port is 14100.
    Any inputs on what might be wrong in the setup will be helpful.Thanks !

    By using netstat -anp|grep 5556 you can check which process on your machine is using the 5556 port.

  • I lost my iPhone recently. It has since disappeared from support profile. Does this suggest that the phone has been restored and synced with another account?

    I lost my iPhone recently. It has since disappeared from support profile. Does this suggest that the phone has been restored and synced with another account?

    See:
    What to do if your Apple ID has been hacked
    (Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

  • I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    MAJOR DEFICIENCY = WASTED MONEY:
    I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • What are the main sap script events and their functionality and usage?

    what are the main sap script events and their functionality and usage?

    Hi,
    Inside the Script, there are events like Top of Page, End of page etc.
    Please elaborate about your requirement.
    Best regards,
    Prashant

  • This is regarding the claims management

    Hi All,
    We are doing one third party intergration, which is related to the insurace domain, I need your help regarding the interagation with the cliams part of insurance. that is the claims management.
    How can we get the claims management verticle in SAP.
    Plesae do the needful
    Thanks
    JayRaj

    Hi,
    In case of Claim management to Collections & Disbursement integration, we need to include BAdI
    ICLF_CD
    However, since you are talking about , configuration of the CM system. I'ld need clarity on it.
    The Insurance Line of Business
    Policy Management already existing on SAP or on some legacy system
    Access a claim from some CRM application
    Different modes of claim processing
    There are many other question, difficult to jot down each one them. Answer my first response and I think I'll be in a situation to help you out.
    Cheers,
    Anish

  • How to get the Details Regarding the tcode like used by  and used in .

    Hi all,
    My requirement is if i give the Z* Tcode in the selection screen I should get the details like program Name and Creator Name and created on and last Changed by and used by and used in Related Data.
    Somehow i managed to get all the data except for two fields used by and used in .Please let mke know is there any Function Module to fetch the used by(User Name ) and used in data or any table where this data is saved.
    Thanks in Advance.
    Regards,
    Naveen

    Hi Naveen,
    What are you exactly looking for in "used by" (if it's who launched the transaction lastly -> performance statistics, transaction ST03N, search forum how to read it) and "used in" (programs in which the transaction is statically defined in CALL TRANSACTION, and other statements -> CROSS table)?
    BR
    Sandra

  • This is regarding counting with microsecon​d accuracy and furthur simultaneo​us AO and counter usage

    hi, i am in seruios trouble. I am doing photon counting using a PMT. so the TTL pulses come at random and the i canhave 1e6pulses/sec tp 1pulse per sec kind of TTL pulses. I need to count them with an accuracy of [ time bins ] 50 microseconds. I am not able to do this with all the possible examples i have seen on labview site as well as that which come with labview package. everything shows some or other error. I have been using labview for analog I/O for about 2 years and have done the most i could understnad but to of no use. does anyone have a sample program ? now the bogger problem is that while counting these TTL pulses i ALSO have to do an analog output [ say a triang
    ular wave on AO channel ]. I was wondering that if i just add the AO vi's in the counting programme will they interfere with each other ? [ I have a very crude counting program which atleast gives me millisec accuracy limited by for-while loops ]or i shd trigger start them together [ counting and AO] and some how make sure that they do not interfere with eacht other. If anyone could help me with either or both program..i'll be very grateful.
    gvs

    A simple event counting example can count TTL pulses for you pretty easily. If you have an E-Series board, the DAQ-STC counter/timer uses a 20 MHz timebase, so your pulses must be separated by at least 50 nanoseconds. The 660x family of counter/timer boards use an 80 MHz timebase giving you a tighter window of 12.5 nanoseconds.
    For your second problem, it's best to use dataflow and enforce a well-defined execution sequence. In other words, wire the error clusters such that AO always executes after (or before) your counter operation.
    In fact, you must enforce serial execution of DAQ VIs to avoid blocking if you are using Traditional NI-DAQ. If you are using the new DAQmx, DAQ operations are supposedly non-blocking in many scenarios. I have not tried to ve
    rify that for myself so be cautious if you plan to run AO and counter code in parallel.

  • Clarifying the need for Governance Risk and Compliance in Defense

    Since Defense organizations must deal with managing internal compliance efforts and are continually challenged to provide clear evidence of internal controls to stakeholders (executives, legislators, constituents) I beleive there is a need by these organizations to leverage governance, risk and compliance solutions that can help them manage these activities...
    I want to put out a call to the community to see where you may see the need beyond the areas I mentioned above for governance, risk and compliance in Defense

    Hi Dante,
    You are correct; showing compliance is a key driver behind Defense organizations choosing GRC products.  However, your question isn't as easy as providing you with a list of standard reasons for investing in GRC.  What is required is an understanding of each discipline; Governance, Risk and Compliance, and translating these areas into real business scenarios for the customer.  In your example, Compliance is only one aspect in GRC. The Public Sector is open to discussions on Governance and Risk as well.  These organizations establish strategy/policy just like the private sector (Governance), and need to use tools/practices like Risk Management to identify and address threats to their objectives.  Hope this helps.  Dan

  • I am getting this error message, " The URL is not valid and cannot be loaded" when I try to go to Firefox home. I have uninstalled add-ons, uninstaleed and reinstalled a fresh new firefox which did not help

    I am getting the following error message, " The URL is not valid and cannot be loaded" when I try to go to firefox home. I uninstalled add-ons , uninstalled Firefox and then installed a fresh version. Still have the problem.
    Thanks for the help

    That issue can be caused by a corrupted or incomplete Visual C++ installation (multiple versions can be installed side-by-side; SxS) that is missing some runtime components (Redistributable Packages) that Firefox depends on (problem with an embedded manifest file that specifies a specific runtime version).
    You need to install the missing components (e.g. VisualC++ 2005 Redistrbutable).
    * https://www.microsoft.com/download/en/details.aspx?id=5638
    *[[/questions/908165]] The URL is not valid and cannot be loaded
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=713167 bug 713167] - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

  • HT1212 my ipad asks for a passcode but I never entered a passcode. this happened after the ipad battery went dead and i recharged.how do i get around the passocde prompt?

    My ipad battery went dead and after recharging and booting up the ipad, it is asking for a passcode. however, no one remembers ever entering a passcode in to this ipad, isnce it used by everyone in the house. how do i get around this passocde prompt?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Every time a call ends or I miss a call my podcasts start playing. I realize this is because the app is only paused and not stopped; however this is a problem I didn't have before the podcast app when it was just integrated into the music app.

    It also does this after I use Siri. I have an iphone 5 and it does the same thing on my 3gs. Since I forget to stop the app frequently it becomes annoying to have podcasts starting at random when in a meeting.
    Thanks for any help!

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

Maybe you are looking for

  • How to creating a large sign with person's photo in illustrator? Please Help!

    Firstly, I'm very new to illustrator. I always use photoshop for everything but the company my person is using is only asking for it in vector. I'm creating a 4x8 ft sign. It contains text, a logo, and a picture of the person that it's for (like a bi

  • Need to change my firmware

    NEED HELP i bought my cell on another country so i dont have my lang install, my cell brand is 6288 RM-78 based on the "Nokia Software Updater" prog. i have my cell with thai and i need to install other lang, please help me i dont know what do beacus

  • ITunes is running really slowly.

    I had Snow Leopard which I upgraded to Lion and still no performance benefit.  I have run Activity Monitor and see that iTunes goes from almost zero CPU usage to 100%  and stays there for several seconds. Just making any changes (like adding an Album

  • 1st time installation for newbies

    I'm a newbie and am finding it difficult to determine the steps I need to follow to begin learning Oracle. With so many products there's nothing online to suggest or recommend where to start. Consequently, I've just spent over 3+ hours downloading th

  • Stored procedure serves up its own code

    I have a stored procedure in Oracle with no in, out or inout parameters and it works but . . .. it also serves up its own sql code as content!?! How can I prevent this? Thanks