Thor digital copy not working?

Hi I bought the movie Thor today. I loaded the digital copy disk into my PC and redeemed the code as I have done many time before. The only thing is this time the movie downloaded ok and when I click on the movie tab i see it there but it will not play.at all. I went to the folder where my movies are "C:\Documents and Settings\Compaq_Administrator\My Documents\My Music\iTunes\iTunes Media\Movies" and the movie Thor is not there. So now I shut down my PC and restarted everything over and get the same result. And yes it does let me reuse the same redeem code over and over??? any help would be great as I have not found any way to contact Apple directly or via e-mail for this.
Thanks
Ralph

tried it this morning and it is now loaded and working.

Similar Messages

  • Back to the Future III - digital copy not working

    Any ideas on what to do when a digital copy fails?
    Got the 25th Anniversary BluRay pack of all of the Back to the Future films. Contains a digital copy disc for each.
    The first two worked fine. The digital copy for BTTF3 did not.
    Has anyone else encountered this? If so, how did you remedy it?
    Thanks -
    jf

    apple wanted a processor family that included versions with reasonable speed and low power consumption to use in laptops etc.
    it probably didn't hurt that the choice they made also makes it easier to support traditional wintel software on macs
    itanium is aimed at servers where power consumption is less of an issue
    if the numbers here are correct then itanium has not been a great success, certainly not one for apple to bet the company on...
    http://www.theregister.co.uk/2006/06/01/itanicq1gartner/

  • DVD Digital Copy not working on iTunes

    ok so i bought Wall-E the movie in DVD form, it came with a digital copy that i could download on iTunes and watch, i registered and everything and it downloaded, but when i click on the video on iTunes to watch it, it just plays a grey screen where the movie is suppose to be playing, what am i doing wrong?

    I found this on another board:
    "Okay, after messing around for 10 minutes, I just ....., went into iTunes, selected the disk in the "Devices" link in the left-side menu bar, and entered the code there... and voilà, it works. The error is apparently in the Autoplay software that is supposed to go launch iTunes."

  • When trying to install a digital copy, everything works including the downloading, until it is processing to iTunes then I receive "You do not have enough access privilages for this operation. Check the disk to make sure it is clean and retry." error.

    When trying to install a digital copy, everything works including the downloading, until it is processing to iTunes then I receive "You do not have enough access privilages for this operation. Check the disk to make sure it is clean and retry." error.
    Tryed several times, Same Results. Tryied rebooting, logging out & into iTunes, Same Result. Seems to do this error with every digital copy, but works eventually. But now will not post digital copy to my iTunes at all. Just same error over and over.
    Any Thoughts??

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • Digital Signature not working in 12.1

    Hi All,
    Digital Signature not working in 12.1

    Hi Subhanim,
    Currently I am having MII 12.0 for 12.1 I have not tested
    I have tested on 12.0 and it is working fine for me following are steps which i configured.
    iCommand Applet setting:
    Audit, Command Audit Role 1 and Command Audit Role 1 Login Required
    HTML:
    I have added iCommand applet with display template as iCommand which I created and one query template (write tag query)
    JS:
    in JS i am executing iCommand and checking success or failure of same.
    you can checkout the role and sequerity tab of iCommand.
    Please go through below thread may be usefull:
    Digital signature issue in SAP-MII 12.1
    Regards,
    Manoj Bilthare
    Edited by: Manoj Bilthare on Jun 13, 2011 3:53 PM

  • Good will hunting digital copy not showing up on apple tv

    I downloaded and redoes loaded good will hunting digital copy, included in my bluray.
    Well for some reason, good will hunting won't show up on my apple tv as purchased like other movies do.
    I know fox/universal digital copies won't work for now, but why doesn't good will hunting show up?
    It's a miramax/lions gate film.
    Any help would be appreciated.

    Same problem here, (and I know exactly what you are talking about). 
    So as directed by AppleCare Technical Support (I have AppleCare on all my Apple products), I sent the following e-mail to the iTunes support page that they directed me to, "All my other successfully redeemed digital copies/digital downloads through iTunes/iTunes store show up in my iTunes purchased movies in the cloud, except this one, "Good Will Hunting."  I got the same message from the iTunes store saying it was successfully redeemed and it downloaded to my iMac but for some reason this is the only movie that is not showing up in my iTunes purchased movies in the cloud and all my other successfully redeemed digital copies/digital downloads are, so I don't know what the problem is at this time.  I hope you can resolve this so that I may enjoy this one from the cloud as I do all my others like this, thank you in advance so very much." 
    I am suppose to hear back from them within 24 hours, I hope it is resolved ASAP.  If I can I'll try to let you know what happens.

  • Digital Audio not working on Satellite A505 S6012

    My digital audio stopped working suddenly.  I use HDMI to send the video out of my laptop to my projector.  I had been successfully using, for over a year, a digital audio cable in the headphone (SP/DIF) jack to output the sound to my home receiver.  The default audio set in the control panel is Realtek Digital Audio.
    If I set the output to speakers and plug headphones in the jack, I get sound.  If I set the output to Realtek Digital Audio and plug the digital audio cable in, I get no sound.  I've tried new cables, changing the input to a different conection on my receiver, reinstalling the Realtek driver, and, as a last resort, completely recovering my laptop to the factory setting.  Digital Audio still does not work.
    Any suggestions?  This is the main way we watch movies in my home.

    hi, have you try out srs audio program it nice!
    can u help me if u have make for yourself a recovery dvd of S505 S6012 because to mine i didnt do it and it gives me a lot of problems.
    if you have please i would like to have it.
    thanks....

  • Digital out not working (unibody)

    I have been using my digital out for some time and now i noticed its not working. When i go to the system panel it says headphones when i plug in the digital audio out connector rather then saying digital audio out. NOthing has changed otherwise. Same connector cable plugging into the same audio system.
    Thanks in advance

    Have you tried cleaning out the jack with some compressed air? Sometimes the Mac will mistakenly think something is plugged in to the optical/analog audio jack.

  • DWfile.copy not working

    I have an extension that I am building and I need to copy a
    file automatically from the config folder to the users local site
    when they apply the extension:
    I've tried this:
    var fileURL =
    "file:///C|/Config/Objects/GJHDigital/test123.gif";
    var SiteFolder = site.getLocalPathToFiles() + "Test";
    DWfile.createFolder(SiteFolder);
    DWfile.copy(fileURL, SiteFolder);
    And I tried this:
    var path =
    dw.getConfigurationPath()+'/Objects/GJHDigital/test123.gif"';
    var path2 = site.getLocalPathToFiles();
    DWfile.copy(path, path2);
    and both do not work. No errors or anything. And the folders
    do exist. Does anyone know how to do this with Dreamweaver MX 2004?
    Because I understand there is a new way in CS3, which I do not have
    yet.

    When you use DWfile.copy() you have to specify the file name
    in the "Copy To" path so try this:

  • HELP! My Dark Knight digital copy wont work!

    Hi guys! I know i'm a little late on this, but i got my dark knight blu-ray disk on christmas of 2008, and i never got around to using the digital copy disk on my mac to put it on my Ipod, until today...So once i popped the disk in it came up on itunes and i typed in the redeem code, and it all worked. Once the download was finished, however i clicked on it in my movies section in my itunes, and all that appears is a gray screen for the entire movie! I put it on my ipod and all that appeared was a black screen, then after a few seconds, kicked me back to my movies list.
    Anyone know how to resolve this problem?
    any help would be greatly appreciated!
    Thanks.

    I have the same problem, it won't work, it gets completed and then gives me an error message saying I don't have a network connection or something dumb, I wish it would work...tried multiple times and it doesn't work.

  • Link JHeadstart copy not working

    Hi there,
    Customer tried to download the JHeadstart evaluation copy from:
    http://www.oracle.com/technology/software/htdocs/devlic.html?/consulting/9iServices/soft10g.html
    Did not work, because 404 error. Could you fix that?
    Thanks!
    Jan Kettenis
    JHeadstart Team

    Hi there,
    The link is fixed, but now it seems we have a problem one level deeper. When I try to download either one of the two files, it gives an error. Would you be so kind to look into that one too?
    Jan Kettenis
    JHeadstart Team

  • ITunes digital Booklet not working

    When I purchased AMOK by Atoms for Peace, I noticed that the digital booklet was not working.
    The file “Digital Booklet - AMOK.pdf” could not be opened.
    It may be damaged or use a file format that Preview doesn't recognize.
    Now of course I have Adobe reader installed, but I didn't think much of it at the time. Then I purchased a new macbook pro retiring my old black Macbook. I have Adobe reader installed, but have the same problem when I downloaded the album off of iCloud.
    Could this have been a mistake on the upload of the album to iTunes by the digital manager of Atoms for Peace? Or I am missing something?
    Not really a big deal, but I thought I should reach out and see if anyone has/had this problem.

    Digital booklets are nothing but PDF files, that should (theoretically) open in any normal PDF viewer. (Interactive booklets, on the other hand, are Flash/Quicktimes files that have all kinds of fancy features but can be more buggy).
    You might want to try to open the PDF file in a different viewer, to make sure that it's not a problem with Acrobat. If it won't open in any viewer, your best best is to contact iTunes Support about the bad file.

  • Help! please! digital-in not working in vista with xfi ga

    I just bought a digital I/O module for my Xfi Gamer card. I was using the youppax driver set. I am not getting any sound from the Digital in on the card. Also the digital I/O selection is greyed out in my control panel. Does anyone know how to get the digital in to work? Next I think I will try to remove all the drivers and software for my xfi and reinstall the Creative Labs latest drivers, do you think that will help?I am sure other people have had this issue also. My primary purpose for my sound card is so I can do multitrack recording on my PC using the digital-in as the source. I have been doing this on my XP machine for years now. This is killing me, Help!!! Please!
    !!! Thanks,

    Robweese wrote:
    Could a Creative rep or an experienced user here please provide direction to me on how to proceed from here? Will the Digital I/O module work with my xtreme gamer card? If the Digital I/O module will not work, what do I need to purchase to get the digital in working on the xtreme gamer card?
    The Digital IO module connects to X-fi cards via the Flexijack, which on all of them except the XtremeGamer is an electrical connection. Unfortunately the XtremeGamer's digital flexijack functions are optical-out (only) instead, so the I/O Module won't work with it. The Product page for the Digital IO Module shows what cards it works with. The XtremeGamer doesn't work with the external IO console either due to the lack of the needed connector. Unfortunately this means there is no way to get a digital signal into that particular X-fi card. Sorry
    Dale

  • Inspire 5.1 5700 Digital system not working correctly

    I have a Inspire 5.1 5700 Digital speaker system that has some issue's.
    The front speakers are all that is working with center channel low volume , the Sub and Rear speakers are not working according to set-up in software , But Sub is working in games and with Music.
    I had been using an MSI P67/ G43 MB onboard sound. Today I gave up and purchased a new sound card, an Audigy Rx. Installed the drivers, did the update for drivers. I was working w/ speaker set up and mic setup and I still have the same problem.
    I am thinking there has been a change in the drivers or windows 7, that the controller does not recognize. I have checked all speakers and the are working.
    I also am using the Optical output to the controller.

    Originally Posted by RonReagan
    ok, great, but how do I select the source, it only shows speakers w / out an option for optical or Dolby or DTS . also, selecting the Dolby or DTS on the controller doesn't seem to change other than tones that I have noticed.
    Ok , I changed it to SPDIF and it only shows 2 channel @ Hz. in the test that pops up, only 2 front speakers are activated. In Arma 3 , it seems to have 5.1 sound again now.
    I used to be able to set up and test the speakers and set the front / rear balance and fade thru the software. I am un able to do that an again, the source is not Optical but SPDIF.
    So, what am I doing wrong here ??
    and thank you for the quick response and help O))
    Hi RonReagan,
    SPDIF (Sony Philips Digital Interconnect Format) basically has 2 types of connection: Optical and Coaxial. In this case, you are using an Optical connection. Hence, it is known as SPDIF Optical.
    It is correct that you received 2 audio channels during speaker test via an optical connection. An alternative way is to initiate the test through the Windows audio endpoint for SPDIF Out (optical Out).
    At the Sound of the Windows Control Panel, configure SPDIF Out as the default device. Click on the Properties. At the Supported Formats tab, check the box for DTS Audio or Dolby Digital. Click on the Test button to initiate the speaker test. You should able to test for the rear speakers.
    Cheers,
    JL-CL

  • Audigy 2 Value digital out not work

    I'm trying to use the digital out on my audigy 2 value card using my onkyo system (6. with a receiver). at first i tried using a stereo /8" male to /8" male cord with one end using a /8" to rca adapter and hooking that up to my coax input on my receiver. using that, i was only able to get 2.0 sound (no sub signal). I have my receiver set to 'direct' input so it receives whatever PCM or DD signal is sent. I tried both mp3's and dvds and nothing gives more than 2.0. I called tech support and was told i needed to use a mono cable. i went to radio shack and got a /8" mono (male) to phono (female) adapter and hooked it up to one end of a phono (male) to phono (male) cord and plugged them into the respecti've places on my soundcard and receiver (coax). Still only 2.0. I did the speaker test in speaker settings and it confirms only 2.0 because all i hear is "front left" and "front right". what's wrong? I'm about to go nuts on this.

    alright, i read the knowledge base articles and saw that the tests won't output more than left and right, but still, it's not working for my dvd's. i have my receiver set to "direct". is that right? i'm using windows media player for the dvd playback, should i try something else? do i have to install an AC3 codec? do i have to enable something in media player? anything please

Maybe you are looking for