Thread 1:signal SIGABRT in Xocde,Ios,objective-C

2013-02-15 16:20:10.222 Addition1[463:11303] *** Terminating app due to uncaught exception 'NSUnknownKeyException',
reason: '[ setValue:forUndefinedKey:]: this class is not key value coding-compliant for the key label7.' ***
First throw call stack:
(0x1c92012 0x10cfe7e 0x1d1afb1 0xb7be41 0xafd5f8 0xafd0e7 0xb27b58 0x231019 0x10e3663 0x1c8d45a 0x22fb1c 0xf47e7 0xf4dc8 0xf4ff8 0xf5232 0x100c25 0x3003a3 0xfdee3 0xfe167 0x27a4 0x10e3705 0x172c0 0x17258 0xd8021 0xd857f 0xd76e8 0x46cef 0x46f02 0x24d4a 0x16698 0x1beddf9 0x1bedad0 0x1c07bf5 0x1c07962 0x1c38bb6 0x1c37f44 0x1c37e1b 0x1bec7e3 0x1bec668 0x13ffc 0x209d 0x1fc5)
libc++abi.dylib: terminate called throwing an exception (lldb)

I can't find an app by that name in the App Store. If this is a question related to app development, your actually in the wrong forum. This is a the tech support forum for using iOS devices. Try the Developers forums.
Best of luck.

Similar Messages

  • Thread 1: Signal SIGABRT

    I know that this is probably a commun question but I'm still posting it because I did not find a suitable explenation that could help me with my problem.
    I just started with xcode and has funny has it is, I'm already having my first error.
    I started a new project (Single View Application), and in the .xib I added a simple label with some text and then tried to "Run" it.
    It compiles fine but then I get the "Thread 1: Signal SIGABRT" and on the debbuger window i get this:
    2012-12-29 23:30:07.699 HelloWorld[2499:11303] *** Terminating app due to uncaught exception 'NSUnknownKeyException', reason: '[<UIApplication 0x7195bc0> setValue:forUndefinedKey:]: this class is not key value coding-compliant for the key view.'
    *** First throw call stack:
    (0x1c8c012 0x10c9e7e 0x1d14fb1 0xb76711 0xaf7ec8 0xaf79b7 0xb22428 0x22e0cc 0x10dd663 0x1c8745a 0x22cbcf 0x22e98d 0x10ceb 0x11002 0xfed6 0x21315 0x2224b 0x13cf8 0x1be7df9 0x1be7ad0 0x1c01bf5 0x1c01962 0x1c32bb6 0x1c31f44 0x1c31e1b 0xf7da 0x1165c 0x1bad 0x1ad5 0x1)
    libc++abi.dylib: terminate called throwing an exception
    (lldb)
    And I just can't unterstand why I have this error because I changed nothing, apart from adding a label in the window (.xib file).
    Thank you in advance.
    Best regards.

    I got the same problem ?
    after unchecked  autoLayout and changed it from ios 6.1 to ios 5.1
    still got the same problem : (
    2013-04-02 01:25:33.295 test7[8493:11303] *** Terminating app due to uncaught exception 'NSUnknownKeyException', reason: '[<ViewController 0x75392d0> setValue:forUndefinedKey:]: this class is not key value coding-compliant for the key btn3.'
    *** First throw call stack:
    (0x1c91012 0x10cee7e 0x1d19fb1 0xb7ae41 0xafc5f8 0xafc0e7 0xb26b58 0x230019 0x10e2663 0x1c8c45a 0x22eb1c 0xf37e7 0xf3dc8 0xf3ff8 0xf4232 0xffc25 0x2ff3a3 0xfcee3 0xfd167 0xfd1a7 0x4690a2 0x45ab99 0x45ac14 0x10e2705 0x162c0 0x16258 0xd7021 0xd757f 0xd66e8 0x45cef 0x45f02 0x23d4a 0x15698 0x1becdf9 0x1c14f3f 0x1c1496f 0x1c37734 0x1c36f44 0x1c36e1b 0x1beb7e3 0x1beb668 0x12ffc 0x2b3d 0x2a65)
    libc++abi.dylib: terminate called throwing an exception
    (lldb)
    Plz give me some advice
    Thank you.

  • Program Received Signal: "SIGABRT"

    Hi, I am currently using Xcode 4.2 for Lion. I am using a normal Window-based application with a tab-bar for iPhone and iPad. Up until now, I haven't had any problems with this, but when I tried testing my app on an iPhone, I seem to be getting this message/error:
    Thread 1: Program received signal: "SIGABRT"
    And the thread that is being highlighted is
        int retVal = UIApplicationMain(argc, argv, nil, nil);
    Normally when I get this error, it turns out that the problem is I have deleted an IBOutlet or IBAction in a header but not disconnected it in the XIB file. This time however, I have checked every XIB and found that there is no such problem.
    Also, whenever I run this program on the simulator, it seems to work fine, but once I run it on the iPhone it does this.
    It seems that the problem started after I insterted a link to the App Store, but even after deleting that, I am still having this problem.
    Any help would be greatly appreciated.

    hi, 
               if we change the XCode project file from lower version to update version this type of problems may occur. I have already faced this. you have to use the break points where the problem. Basically it is the problem for releasing the object memory... Find out where it is happening and use Copy / retain keywords..... May helpful...

  • HT4623 i cant get signal since update to ios 7

    please help i desperately need my phone i cant get a signal since update to IOS 7.0.2

    What Troubleshooting steps have you tried...?
    Have you contacted your Carrier...?

  • Why do I lose signal since updating to iOS 5.1?

    Hi,
    Since I updated my iOS from 5.0.1 to 5.1, my iPhone:
    1) Takes a lot more time finding the network when I turn it on.
    2) Frequently loses reception and searches for network for 10-30 seconds before going back on the network full strength. The weird thing is that when this happens, I'm usually at the same place, so it does not make sense that I go from five bars of signal to nothing.
    3) Also, when I lose signal, there is a prompt telling me that I lost signal. This prompt is annoying, is there a way to make it not appear?
    Sifting through forums, I realized that I was not the only one having this issue. Is Apple aware of that problem? Is there anything I can do to resolve this issue?
    Thank you

    The signal on iPhone has been broken since the 5.0.1 update, some people got it as early as 5.0.1 while others have now seen it manifest itself with the later 5.1 update. So far Apple has not taken on it's resposibility to fix it, and will not likely look into it while the media keep quiet. There have been plenty of threads created on this support site but it looks like everything falls on deaf ears, sorry to inform you of this.
    You will now also find that text messages may arrive very late, some will not arrive unless you power down the phone and turn it back on again... even if you did have a signal when the other person sent you that text message.

  • Loss of Reception/signal on 4S with iOS 6.1.1 update

    Since updating to iOs 6.1.1, I have noticed on my phone and my fiancee's phone there has been a loss of reception/signal. As I thought  this update fixes an issue that could impact cellular performance and reliability for iPhone 4S. But it looks as if it affected it to where I now no longer get all bars of signal as before the update my signal strength was excellent all bars lit up and receiving signal was excellent since the 6.1.1 update I no longer get a full signal, I get between 2 and 4 bars shown never 5 now since update. I think a fix update should be in order to correct the issue as before it was good now it is terrible. I know others also have been compaining about battery drain on iOS 6.1.1 but I have not seen that on mine or my fiancees phone just the signal strength does not go above 4 on either of our phones like as before they would sit at 5 in our house and anywhere we would travel. Has anybody else noticed that if so please let me know so I know I am not the only to see that since updating to iOS 6.1.1. Thanks and have a nice day.

    Hi again, today's journey to the Apple store was worthwhile. Not only did I get a replacement phone,  it was still under warranty, but also an explanation as to what may have caused the problem.
    According to the technician who assisted me, as the upgrade from IOS 5.- to 6.- is quite large, in the transfer of information upgrade, apparently the programming data for wifi and Bluetooth connectivity was lost, which apparently sometimes happens, this being described as a freak occurrence. According to the technician, if this occurs, it becomes a hardware fault and there is no repair, replacement is essentially the only option. Fortunately as I was within the warranty period, on the spot replacement was available, already with IOS 6.- on it, so was informed that the same problem would not occur.
    Upon arriving home, after a minor upgrade to 6.1.2 I was able to put everything back on to the phone so it ran like it did three or so weeks ago. The other advice given was to always hook up to iTunes via your computer to do the larger updates, those that increase in whole number, as those that increase incrementally are usually very minor and are usually an addition of data, not replacement.
    I hope this helps others with their problem, mine in the end was resolved within ten minutes in-store. I dread to think what situation I would have been left in if I was not within the warranty period. Good luck to you all!

  • Problems with TV Out signal after upgrading to iOS 5.1

    Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1?  I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/back screen.  Prior to upgrading, I had no connection problems and could view TV Shows, Movies, Music Videos, Keynote, etc...without problems.  I've been unable to find any resolution to this problem, even followed Apple guidance to detach and reattach the HDMI adapter without success.  Seems like a software bug to me and it's a major problem when trying to conduct business or personal activities.  Hopeing Apple has a fix in work already...anyone else have any ideas?  Thx in advance...

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
    If that does not work, restore the iPad to the factory settings.

  • Very weak wifi signal after updating to iOS 7.0.5

    I am in Malaysia, and received notification to update software to iOS 7.0.5 a couple of days ago. Since the update, i keep losing wifi signal in the house, which did.not happen before the update. Even when connected to the wifi, the signal bar shows 2 while my other iPhone 4S and iPads are showing full signal strength.
    Please advise how I can rollback to the previous version, as i have just realised this new update was meant for China.
    Please help! Thank you.

    My problem exactly! With Iphone 4! The updated phone will not connect, the other Iphone 4 not running this latest update works fine! Come on Apple!! Need a fix yesterday!

  • Signal strength worse since iOS 6.1.2.

    Ever since I upgraded to iOS 6.1.2, my LTE signal strength on my iPhone 5 has depleted. Where I used to get 4 bars I now get 1-2. Sometimes places I used to have LTE are 3G for some reason. It only started when I got iOS 6.1.2. Is this a software bug that will hopefully get fixed soon?
    I have Verizon in case that matters.

    Hi friend,
    Try to reset your idevice, pressing and holding Home/Sleep buttons until restart your device.
    If the issue persists, restore your network connections, in Settings>>General>>Reset.
    Hope it helps

  • Need thread safe way to access read-only objects

    I have been working on a lot of projects and all the developers agree that they want thread safe code when called by many threads. It's rare developers are making statement like: "Data are not corrupted often so don't bother" or "It's not thread safe, but that will not often create issues".
    In TopLink client session itself is thread safe but not the persistent object themselves. Via client session, if you want thread safe access you need to put a lock on CacheKey and it's not a public/supported API. So the only thread safe access is via unit of work.
    We would like fast access to objects. We have a batch process that just need read-only access to objects. We need to read via unit of work to get thread safe access. But we just need the clone when we read via unit of work, we don't need the backup for change detection.
    However, TopLink doesn't have a mean to do that.
    Please push implementation of Bug5998333[WANT THREAD SAFE AND CORRECT ISOLATION WITH OBJECTS FROM ADDREADONLYCLASS]
    In Hibernate, by design, all access are always thread safe. Accessing read-only object just create one copy (a clone), no backup needed.
    Oracle claims that TopLink is fast. I wonder if their performance testing code is thread safe, so access objects via unit of work or they take the shortcut of accessing objects from client session. Also, reliable performance comparison should use conform in unit of work.

    As you stated the UnitOfWork offers you your desired functionality, you would just like an improvement in performance.
    In TopLink 10.1.3 (or 11g preview) you have a few options:
    - Use a UnitOfWork an live with the slight overhead of the back copies (it will only add 5-30 % overhead to your processing)
    - Instead use an isolated client session, this will not require any cloning or backup clones, but also does not allow any caching.
    - Use change tracking, TopLink added attribute-level change tracking in 10.1.3, when used the UnitOfWork does not create backup clones. In 10.1.3 it was mainly used for CMP and requires code generation, but you could implement or weave the code yourself. In TopLink 11g, change tracking is weaved by default with JPA and the weaver can also be used with POJO objects.
    I agree that having a feature to mark an object as transactionally read-only would be desirable, it seems like you have logged the enhancement. You could try escalting the enhancement through Oracle support, but since it is an enhancement and not a bug, it is probably beyond what support offers. You may wish to investigate services, or potentially join the open source Eclipse EclipseLink project which the next version of TopLink is being developed under and take part in the feature yourself.

  • IPhone 4 does not catch signals after upgrading to iOS 7

    I am a iPhone 4 user. It does not catch proper signal strength in home after upgrading to iOS 7 whereas it does catch it on the outside. It worked perfectly with previous iOS versions. Please help me out.

    Does anyone have any solution???
    Reply ASAP...
    My iPhone has turned into an iPod since l upgraded...

  • Low cell signal After upgrade to IOS 5.1.1 to my iphone 4

    After upgrading my iphone 4 to IOS 5.1.1 ,my cell signal becomes very low and after some time it shows no service.

    Do you know if your "Cell Network Search" under "Location Services" is on or off. I have been struggling with the same issue, on and off and this is one of the settings I have changed recently.

  • Lost all signal after updating to IOS 7.1

    I have an iphone 4s and Tesco sim. No previous problems at all and had kept the phone updated, until about 5 days ago when I updated to IOS 7.1, since when I have lost all my network coverage. It constantly shows 'Searching' or sometimes 'No Service'. I can't make or receive any calls or SMS which is hugely frustrating - though the rest of the phone is working fine and I can still imessage using the internet. It's not a problem with the provider (I have a work phone on the same network which is working fine) and it isn't the sim card, which I had changed incase that was the problem. I've tried all the tips I can see on here - putting flight mode on, turning phone on/off, turning 3g on/off, turning automatic carrier on/off, reset network setting, even did a factory reset today - all to no avail.
    If anyone can help I would be very grateful. Seems very unfair that I should lose the basic use of my phone for updating?

    Is your iPhone restricted?  Check Settings > General > Restrictions

  • IOS - object-group service

    Hello Guys,
    my question is do below access-lists operate the same way? I am confused about source and destination ports in object-group based acl.
    ip access-list extended 101
      deny tcp any any eq bgp
      deny tcp any eq bgp any
      deny tcp any any eq ftp
      deny tcp any eq ftp any
    service object group services
    tcp eq bgp
    tcp eq ftp
    ip access-list extended 101
      deny object-group service any any
    Following question is if the purpose is to deny any traffic where source port is bgp (e.g. deny any eq bgp any), how it can be configured using object group service.
    Thanks in advance
    Regards

    Hi,
    Have you tried configuring it like this
    object-group service GATEWAY-SERVICES
    service-object tcp eq 88
    service-object tcp eq 135
    service-object tcp eq 445
    service-object tcp eq ldaps
    service-object tcp eq 3268
    service-object tcp eq 3269
    service-object tcp eq 53
    service-object udp eq 53
    service-object tcp eq 389
    service-object udp eq 389
    service-object tcp eq 464
    service-object udp eq 464
    service-object tcp range 49152 65535
    service-object udp eq 49152 65535
    access-list dmzAccess permit object-group GATEWAY-SERVICES host 172.26.11.10 host 10.16.11.203
    I am not sure if it was only after software 8.3+ that the command under the actual "object-group" was of format "service-object tcp source" / "service-object tcp destination" (or the same for UDP)
    - Jouni

  • CSCup43257 - ASA Traceback in Thread name ci/console while modifying an object-group

    Hi Team,
    When can we see Updated releases showing up with 9.1.5-13 or later mentioned on the page, customer wants to see this update which has been verified by the submitter.

    Hi Team,
    When can we see Updated releases showing up with 9.1.5-13 or later mentioned on the page, customer wants to see this update which has been verified by the submitter.

Maybe you are looking for