Three way selector control

Is there any way that I could create or import a three way selector control in my labview application. The three way selector is used to adjust the pressure level of my application. The three levels are low, normal and high. I tried using the knob control but was unable to change the tickmarks of the knob. Please email me at [email protected] if you have any suitable solutions or suggestions for me. Thank you very much.

or even easier: use an enum...
"Wiebe@AIR" wrote in message
news:aiqm59$9iu$[email protected]..
> The easiest way is to take a slider control, make it an integer.
>
> Set the data range from 0 to 2, step must be 1. Adjust the colors and
layout
> in the customize control window. Hide the range, and add three labels to
it;
> low, normal and high.
>
> This way you can make a nice 0/1/2 control. No refs, no attribute nodes,
> etc.
>
> Regards,
>
> Wiebe.
>
>
> "DonTan" wrote in message
> news:[email protected]..
> > Is there any way that I could create or import a three way selector
> > control in my labview application. The three way selector is used to
> > adjust the pressure lev
el of my application. The three levels are low,
> > normal and high. I tried using the knob control but was unable to
> > change the tickmarks of the knob. Please email me at
> > [email protected] if you have any suitable solutions or suggestions
> > for me. Thank you very much.
>
>

Similar Messages

  • Is there any way to control table indentation via a style?

    Experts-
    HI. I'd like to see if there's a way to control the indentation of tables in a document by simply adjusting the margin-left value via a (Table?) style?
    I finding that table indentation is adjusted in a table's properties settings:
    <table class="AlternateBlueColorGrid" style="padding-left: 6.00pt; padding-top: 6.00pt;
             padding-right: 6.00pt; padding-bottom: 6.00pt; margin-left: 40px;"
             cellspacing="0" width="577">
    This is fine for adjusting a single table. But supposing I want to indent all tables in a document or, better, all tables of a certain style. There doesn't seem to be a way to make the indentation setting part of a table style to facilitate this action, at least not through the table settings dialog.
    I see that I can specify margins in a div style, but I can't seem to apply a div style to a table (or paragraphs for that matter. I need to read up on div styles.)
    Thanks in advance?
    -Kurt

    You can do this by manually editing the CSS with notepad, as I don't
    think the RoboHelp CSS editor supports this. What you can do is just
    take the margin-left style and put it in the selector for the table. In
    the example, look foor
    table.AlternateBlueColorGrid {
    If it doesn't exist, you can just add this to the CSS.
    Kind regards,
    Willam

  • Three-Way Color Correction in Adobe Premiere Elements 13?

    Does Adobe Premiere Elements 13 have the Three-Way Color Correction feature, as found in past versions? Really important.

    Phil-SC
    What computer operating system is your Premiere Elements 13 running on?
    In Premiere Elements 12 or 13 Windows 7, 8, or 8.1 64 bit
    The short answer is Yes. See fx Effect/Color Correction/Three-Way Color Correction.
    The longer answer is in the form of the following 3 screenshots displaying a side by side comparison of the 12 and 13  settings area in Applied Effects/Applied Effects Palette/Three-Way Color Correction Panel expanded
    Midtones
    Premiere Elements 12 on left, Premiere Elements 13 on right
    Highlights
    Premiere Elements 12 on left, Premiere Elements 13 on right
    Shadows
    Premiere Elements 12 on left, Premiere Elements 13 on right
    I have not done a side by side comparison of results from the two versions, but they have the same controls and
    options as you can see.
    ATR

  • Anyone experiencing timeline issues? No drop down in three way cc saturation

    Hi not quite sure when, probably with in the last week or so I've noticed that a project i started a while ago has become buggy.  The timeline needle doesnt scrub, different sequences show up sparraticcaly, saturation doesn't drop down in three way cc, I change the work space then it works for a second but goes back to the way it was.  It's almost like a memory issue (but my memory is fine), I checked my gpu (gtx 670 4gb) worked great about a week ago. Friday I had adobe on phone for almost 2 hours and couldn't figure it out. So I'm wondering if anyone else is having this experience.
    17-3930
    32 gb ram
    Gtx-670
    8-2TB raid 6 close to 800Mbps
    Lsi 9271-8i 
    256 crucial m 256 (system os)
    I'm editing MTS files from the fs700 s-logII, the support tech said that should have no bearing.   I'm at a loss here, my work and project is suffering big time.  I don't what to do.  Any help would be greatly appreciated.  
    Thanks

    Hi Mark,
    I too have this issue, and this time, I cannot find a work around. The dropdown arrows do not appear to function on any effect, and the timeline controls do not allow you to move the playhead, although dragging the mouse around moves the playhead in the clip playback window.
    My attempts yesterday to trouble shoot involved the following:
    Holding SHIFT while launching Premiere for a "safe mode" style launch - no fix
    Manually deleteing the Adobe Premiere Pro configs and settings in c:\users\[name]\Adobe\Premiere Pro
    Uninstall\reinstall without deleting preferences (option during uninstall).
    Uninstall\reinstall WITH deleting preferences
    I'm completely stumped and unfortunatly this bug has already killed two deadlines for me. ANyone else having this issue, as I cannot narrow it down any further.
    Set-up
    Win7 x64
    16GB RAM
    256GB SSD, 2TB Media drives x 2
    Geforce 660
    Premiere Pro CC 7.1 (latest version)
    Cineform\GoPro Studio Pro (latest version) - attempted cineform files AND h264 files
    Please advise, as I see no otehr solution besides a reformat but the issue seems limited to Premiere.
    Thanks for any suggestions
    Jason

  • Question for GR IR functionality - audit requirement (three-way) match

    Hello,
    I have a question in regards to three way match functionality in SAP (matching of PO, GR and IR).  Auditors asked us if  GR-IV indicator is checked for every PO, and for our company this indicator cannot be checked for every PO due to drop shipments, LC terms, etc.  However, AP is ensuring that GR document is posted prior to posting IR for all POs.  In this case, even though GR-IV indicator is not checked at PO item level, does SAP enforce automatic three way matching based on the tolerance key set (DQ and PP), or does SAP not perform three way match since the GR-IV indicator was not set in the first place? 
    Please share some insight.  Thank you.  

    Hi,
    As you know three ways match related to PO-GR-IV but in your case you want pay drop shipments and LC terms to vendor where you need two way match which is with PO-IV. The disadvantage in two way match, you never know whether the whole PO amount is delivered or not in your system (in real scenario). For two way match, select those vendors in t.code:XK02 and do not select check box of “GR-Based Inv. Verif.” in Control data segment in Purchasing data view & then save.
    Now create a new PO and go for directly invoice verification WRT new PO.
    For more refer threeway match details
    SAP Threeway Match Functionality & configuration
    Regards,
    Biju K

  • CS6 Three-Way CC not importing setting from CS5.5 Timelines or from Saved Presets from CS.5.5

    Hello,
    I had created two presets for the CS5.5 Three Way Color Corrector that I use in almost every project for dealing with sun shadows and hightlights on talents's skin and they no longer work in CS6.  I've tried loading the old project/timeline/sequence into Premiere CS6 but the TWCC just acts like it is at default settings. No changes to the video at all. 
    I also had saved my two TWCC settings as presets (from CS5.5) to the hard drive to I would not loose them.  I tried reloading those presets into CS6 but same problem.. they do nothing now.   I guess no one checked to see that the new CS6 TWCC was backwards compatible with CS5.5.   Major problem when loading / converting cs5.5 timelines to update client's projects.   Adobe, please take a look at this and fix as soon as you can.  Thanks!  Wayland
    Version info:
    CS6 Cloud (last update as of friday Sept. 28, 2012)
    CS5.5 Master Collection (previous version - now uninstalled)
    Windows 7 Ultimate 64bit

    Hi Jim,
    I've spent the better part of the day trying to redo what I had before and frankly the new TWCC sucks!  The previous one was sooo much better.  I can't even get close to what I had before. Many of the controls show up when you select 'show' but have little or no effect on the real video.  I wish I could just delete the current one and replace it with the old one.  If I still had CS5.5 I'd try that.  Not happy at all.  I'll be up all night trying to catch up due to time wasted on this stupid redesign of the TWCC as I have a ton of work due tomorrow. 
    Thanks for the reply and Best Wishes,
    Wayland

  • Three-Way Color Corrector Eyedropper Tool Not Working on Second Display in OSX Maverick

    Hello,
    Since updating to Mavericks at work on Monday, I have been unable to use the Three-Way Color Corrector's eyedropper tool on a dual-screen setup in Premiere Pro CC.
    I have all of my panels, apart from my Program monitor panel, on one display. When I select the Three-Way Color Corrector's white balance eyedropper and go to the second display where my Program panel is, it turns back into an arrow and doesn't allow me to select anything. When I move my Program panel to the same display as the others it lets me use it as normal. Unfortunately that is not how I work and I would like the program to function as normal.
    I was wondering if anyone else has had this problem and discovered a solution. I will submit a bug report right now.
    Thank you.

    Hi Punker,
    Thanks for posting the workaround. This is a known issue that we're investigating. Fow now the workaround is to:
    Goto> System Preferences>Mission Control.
    Un-tick "Displays Have Separate Spaces"
    Logout or Re-boot system.
    The issues should be resolved.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • Where is Histogram in Three-way Color Corrector

    The Three-way Color Corrector Help section states: "The effect has a histogram that displays the image’s luminance." Where is this histogram?

    Good tips from Robodog2 and Shooternz.
    A histogram can be dynamic just like the waveform monitor. But the Levels histogram (the only histogram I can find in P Pro) does not work that way. It displays a shapshot of the currently visible frame. You have to close that dialog box, move the CTI, and reopen the Levels dialog box to see the updated histogram.
    Comparing histograms in P Pro with PS shows you how that the two programs view images differently. Why that's so, I don't know. But here are two screenshots showing histograms from both products of the same video frame:
    This is the P Pro Levels effect histogram for a frame in a clip.
    And this is the PS histogram for that same frame.
    The Three-Way Color Corrector, Tonal Range Output display shows you what P Pro sees as Shadows, Midtones and Highlights. You can alter the default settings for what P Pro considers Shadows, Midtones and Highlights by changing the settings in the Tonal Range Definition control.
    In any event, this thread started with a query based on what we now know was a mistake in the P Pro CS5 Help file. I have posted a correction to that Help file page.
    Bottom line for me...other NLEs and color correction tools have histograms. P Pro, for all practical purposes, does not have one. Perhaps an Adobe engineer might weigh-in on why that is so.
    Best regards,
    Jeff

  • Way to control iTunes

    Good day !
    I'm looking for a simple way to control iTunes without it being the "active" application.
    For example, if I'm working on a document in Pages, I would like to control iTunes without leaving my current document.
    Hope I'm making sense.
    Ta for any advice !

    Aside from that suggestion,
    If you have a Macbook Pro, and I am assuming MacBook, or even other Apple keyboards, the F7-F9 keys allow you to go to a previous track, play/pause, next track. While F10-12 Mute or control volume up or down. Simple controls, but they are handy.
    Another solution would be to use a Dashboard widget, since I see you're using 10.6.3, I know that an iTunes Dashboard Widget actually comes with the Mac. Hit the F4 key (dashboard) to bring up your dashboard, which contains widgets of weather, time, date, and whatever else you put up there.
    Click the little PLUS sign in the bottom left hand corner. This lets you add widgets. Find the iTunes one and drag it up to where you want.
    A THIRD option, is while you are using your application, right/alt click the iTunes Application from the dock. This gives you several options including the ability to shuffle/repeat, start genius, rate a song, or play recent songs.
    These are all three options that do not require you to download additional third-party software.

  • Is there a way to control the number of concurrent SMTP connections on Database Mail?

    Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
    Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
    We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
    Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

    Hi rkohler,
    Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
    of concurrent connections.
    There is similar issue about database email on SQL Server 2005, you can refer to the following post.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Is there a way to control the number of consumed messages from JMS?

    Hi everyone,
    I have a BPEL process that is consumes messages from a foreign queue, performs a transformation, and passes it to Oracle Apps. I'm curious if there is a way to control the number of messages consumed at a time for processing.
    For example, if we place 50 transactions on this queue, I would like to only consume 10. And then as each one is processed and passed to Oracle Apps, I would like to pull another transaction off the queue. So basically I would only be processing 10 at the most.
    The issue I am having is we put 50 on the queue and the 50 are take off right away. But then half are making it into Oracle Apps and the remainder is failing with a JCA Connection Factory max connection error.
    Instead of changing the settings to get more through, I am wondering if it's possible to limit the number being processes at any one time.
    Thanks

    Hi,
    Have a look at the adapter.jms.receive.threads Property for JMS Adapter...
    http://docs.oracle.com/cd/E21764_01/core.1111/e10108/adapters.htm#BABCGCEC
    Cheers,
    Vlad

  • Is there a way to control which processes should run or not ?

    I have a mac with Snow Leopard and was wondering if there was an app or some other way to control which processes run at startup and which dont etc ? I made a new user account and logged in and noticed that it ran like brand new. It loaded up faster and smoother than my normal account. I looked at the processes running and noticed that this new account loads up like a 4th of the processes my main account runs at startup . How can i make my main account run the same processes only so it will run as smooth and fast ? is there an app for this ? thanks (an app that also tells me what each process is for will help too so i can close the processes that i dont need and so that i dont have to close them every time i reboot, but that it will also stop them from automatically loading)
    Message was edited by: Pianohero

    most of the apps that would run at login (which btw is different from startup) automatically are things in the login items. there may be a few items in homedirectory/library/lauchagents but that would be the only place. other than that what runs at login on one account will run on the other. note however, that if you remove any launchdaemons from homedirectory/library/lauchagents the apps that made them may not work properly depending on what those launch daemons do.
    what 50 other processes are you referring to that you see on your main account? most of the stuff you see in the activity monitor are system processes that should not be removed. normally they hardly consume any CPU or RAM.
    Message was edited by: V.K.

  • Is there any way to control the volume on my Apple TV?

    Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
    First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
    Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
    The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

    Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
    It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

  • Quantity variance in Invoice Vs. Three way match in PO

    Hi Experts,
    I am not able to find any differrence between quantity variance Vs. Three way match in PO.
    For example in our purchase orders for all the items we are having Two way match (PO-Inv, GR-Bsd Inv is not checked) but we have defined quantity varaince in Invoice. So when we are trying to post invoice for purchase order item for which goods reciept is not performed, system is blocking the invoice due to quantity variance.
    So i think if you have quantity variance at invoice level then system is going to check whether goods reciept is perfromed or not regardless of Two way or three way match.
    Please advise if my understanding above is correct.
    My second question is as we can define two way/three way match at various level (Supplier, Inforecord etc.). Is there anyway that i can define that quantity variance in Invoice should be for certain material groups only.
    Please advise.
    Regards,
    Kamal

    hi,
    when you set the qty variance, and try to post the invoice just after the PO, the system will show a message at IR ie. " Quantity delivered is Zero"...
    this message is warning message...
    The system will block the invoice item when the doc is posted, depending on how the tolerance key DW  is set(Qty variance to Gr qty = zero)...
    Hope it helps..
    Regards
    Priyanka.P

  • Three way matches

    I need to check configuration setting to check if three way matches have been activated for
    1) Vendor Order, Good Receipt and Payment to Vendor
    2) Customer Order, Customer Invoice and Customer Payment
    How do I do check this, what is the path.

    Hi
    For vendors check ME23n---Display PO
    MIGO-- Goods receipt
    MIRO--Invoice reciept
    Regards
    Aravind

Maybe you are looking for

  • How do I get icloud on iphone 5s to recognise new apple id?

    I changed my apple id a few years ago to new email address, however I can't seem to get icloud on the phone to recognise it, it seems like all apps etc uses the new one, but I am trying to turn find my iphone app off via icloud to restore backup but

  • Safari wont load or itunes store or ping

    Hi, i have a windows 7 pc 64bit. Itunes store, safari and ping will not load. This also occurs on a windows 7 32bit pc on the same network. I have uninstalled/reinstalled all apple products. I definitly have the 64bit version of software on the 64bit

  • How can I see with which groups a contact is associated?

    In Snow Leopard I could hold down the option key when a contact was selected, and the groups with which it was associated would be highlighted in yellow. Is there a way to do this in Lion?

  • About vz messages and mypicmessages

    I am the one that pays the bill for the 4 cellphonez on my account. The phone in question is a lucid 2, it is receiving and sending from both of these pages. the my pic starts with a cellphone number then mypicmessages.com. From what I have read both

  • Workitem and Agent assignment

    Hello, Well, I have critical requirement. My requirement is, there is an activity USER DECISION in a workflow. Now, that activity has a standard task automatically assigned to it. That standard is of type general task. The activity has a role assigne