Thumbnails do not display after using rebuild tool

I am using OSX 10.7.5, and iPhoto 8.1.2.
recently I made a back up copy of my files.
I then reinstalled my operating system.
I then copied my iphoto library back onto my computer.
imported my iPhoto library into iPhoto
Pictures are in iPhoto.
Thumbnails do not display.
I have used the rebuild tools provided by iPhoto.
Still no thumbnails displaying.
any other ideas?

It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
"re: Thumbnails do not display after using rebuild tool"
Terence suggested reloading my back up library.
I asked Terence where I should import to.
I was thinking that my thumbnail issue was related to the way I imported my back up.
You clarified where to import the library...
I tried it and I still have no thumbnails
I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
can you help me?

Similar Messages

  • SAP Webdispatcher :Images are not displayed after using the URL filtering

    Hello,
    I have installed the SAP webdispatcher 7.3 on Linux redhat 5.4 in front of the Portal 7.3.
    I wanted to restrict the access just for the IRJ prefix so for this i used the parameter wdisp/permission_table = PermFile
    with Permfile as follows:
    #Denial of the useradmin URL from the WebDispatcher
    P /irj*
    P /irj/*
    The filtering is working well except that for IRJ the images are not displayed so i was using so i added the following line to disply the images to the logon page
    icm/HTTP/auth_
    P /logon_ui_resources/*
    P /logon_ui_resources*
    but i still have the same issue for the irj page where no icons are displayed and i can do nothing.
    The same issue also happened when using the icm/HTTP/auth_xx
    Do you have an idea how to deal with this issue?
    Thanks in advance;
    Hassan

    Hello,
    After checking the HTTP code of the irj page on IE,  i foud the needed URL to permit so i modified the permision table and it works fine for the moement
    P /irj*
    P /irj/*
    P /logon_ui_resources/*
    P /logon_ui_resources*
    P /AFPServlet/*
    P /AFPServlet*
    P /com.sap*
    P /com.sap/*
    P /webdynpro/resources*
    P /webdynpro/resources/*
    Thanks for you help,
    Hassan

  • Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

    Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

    4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
    If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
    You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
    Once Disk Utility loads, do the following:
    1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
    2 - Click the 'First Aid' tab
    3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
    4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
    5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
    You should boot straight into the system partition when complete.
    Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
    If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
    Hope that helps.

  • My .mov file thumbnails do not display in Bridge CC.

    My .mov file thumbnails do not display in Bridge CC. It worked previously with CS6. Mac Operating system 10.6.8
    Tried purging cache without any luck. Any suggestions.

    This forum is actually about the Cloud, not about using individual programs
    Once your program downloads and installs with no errors, you need the program forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/bridge

  • Last photo's thumbnail is not displaying

    Last photo's thumbnail is not displaying when i enter the camera app.When you enter the camera at the lower left pont there is a thumbnail  of your last photo. Instead there just a black box where the photo should be.

    Why are you posting this same/similar thing AGAIN as you just posted yesterday? That other one is still very much active.
    URGENT - Narrative notes not appearing in ESS/MSS after approving Leave Req

  • Overhead calculation not happening after using Overhead key and orgin group

    overhead calculation not happening after using Overhead key and orgin group.
    There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
    We want to apply/add Overhead to SFG/FG materials.
    We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
    But our problem is with material standard cost estimate process.
    We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
    In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
    But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
    We have checked all things as mentined below.
    Firstly that the correct costing sheet is assigned to the valuation
    variant.
    That the costing sheet is entered for the appropriate material type:
    Finished and semi finished or material components.
    All of the above can be checked and verified via transaction OKKN.
    In addition make sure that the base value maintained is present in the
    costing, for example the base may include an Origin group, is that
    origin group part of the materials being costed?
    Similarly if the base is found and values exist how is the overhead
    rate of the costing sheet set up, is it valid etc.
    And finally do a similar check for the credit.
    we doubt this as a programm error...
    So, request all experts to have ur feedback..

    Dear,
    Check your origin group & material unit of mesaurement is same.
    some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
    You can see unit of measure for material in Additional data - unit of measure.
    Check BOM component material unit also.
    Check same  unit of measure is maintain in KZS2
    I hope above will useful.
    GOPAN

  • Overhead calculation not happening after using orgin group.

    overhead calculation not happening after using orgin group.
    There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
    We want to apply/add Overhead to SFG/FG materials.
    We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
    But our problem is with material standard cost estimate process.
    We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
    In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
    But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
    We have checked all things as mentined below.
    Firstly that the correct costing sheet is assigned to the valuation
    variant.
    That the costing sheet is entered for the appropriate material type:
    Finished and semi finished or material components.
    All of the above can be checked and verified via transaction OKKN.
    In addition make sure that the base value maintained is present in the
    costing, for example the base may include an Origin group, is that
    origin group part of the materials being costed?
    Similarly if the base is found and values exist how is the overhead
    rate of the costing sheet set up, is it valid etc.
    And finally do a similar check for the credit.
    we doubt this as a programm error...
    So, request all experts to have ur feedback..

    Dear,
    Check your origin group & material unit of mesaurement is same.
    some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
    You can see unit of measure for material in Additional data - unit of measure.
    Check BOM component material unit also.
    Check same  unit of measure is maintain in KZS2
    I hope above will useful.
    GOPAN

  • SB04100 Sound Blaster Card not working after computer rebuild

    =SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
    Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
    Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

    Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
    Everything works for now -- I'll be glad to get this particular computer out of my house !

  • Thumbnails are not displayed correctly in Firefox, but displayed correctly in Safari and G. Chrome

    Firefox display problems regarding this customers site:
    http://gardenia.dk/collections/collection/
    Thumbnails are not displayed correctly in Firefox - only a tiny bit of the picture is visible, incorrect scale (displayed correctly in Safari and Google Chrome).
    Can I do anything to make it work in Firefox, too?
    Kind regards,
    Annette

    This article might help you-
    https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently

  • Oem web page will not display after O/S dst patch

    Hello,
    The Grid web page will not display after we DST patch for the o/s.
    All below start fine without any errors:
    emctl start oms
    emctl start iasconsole
    opmnctl startall
    emctl start agent
    The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
    What logs should I be looking at to figure why the web page is not displaying? Thank you.

    Provide the output of these comands:
    $OMS_HOME/bin/emctl status oms
    $OMS_HOME/opmn/bin/opmnctl status
    $AGENT_HOME/bin/emctl status agent
    $DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
    SELECT STATUS FROM V$INSTANCE;
    EOF
    $DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
    Regards

  • My iBook will not display after Power up Chime

    Please I need Help.
    My iBook (16VRAM) Does not display after the power up chime. so i have tried to reset the PRAM by holding down CMD, OPTION, P & R after the chime, But Nothing Happens, I dont hear a second chime (I dnt Knw how long am suppose to hold down the keys, But i held it for 2 mins and still nothing)
    Please help.
    Thanks.

    Welcome to Apple Discussions Aaron
    Force quit in the middle of an installation spells "trouble". Try starting the computer in Safe Mode. If successful, restart the computer and see if it fully boots. If not, you more than likely have directory damage that needs to be repaired. Disk Utility may be up to the task.
    Post back

  • Hasselblad Thumbnails (*.fff) not displayed in CS4

    Hasselblad thumbnails (*.fff) not displayed. Older file-versions created from *.3fr to *.fff by FlexColor are displayed. Newer versions created by Phocus are not displayed. In Apples finder they are all displayed well and you can zoom in to full screen. This is valid for *.3fr, *.fff (created by RAW-converter FlexColor or Phocus).
    Adobe® Creative Suite® 4 Design Premium actual version, camera raw 5.4, Mac OS X 10.5.7, Power Mac G5

    Here, I found a relevant thread in the ACR forum for you:
    http://forums.adobe.com/message/1982052#1982052
    Only ".3FR" is supported.  ".FFF" is not supported.
    Since ACR does not support .fff raw files, Bridge cannot build the thumbnails.
    The Finder is most probably just showing you the embedded JPEG preview.

  • Forms not displaying after ATG 7 patch

    Forms not displaying after ATG 7 patch., 11i Linux OS.
    6241631

    Hi;
    AFAIK no, i also cant see this info at below doc
    About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
    Please check upper note below part and be sure you have all those steps on your issue:
    -Known Issues
    -Instructions for Applying Oracle Applications Technology Update for 11i.ATG_PF.H.delta.7
    -Implementation and User Documentation
    Regard
    Helios

  • Module borders not displaying when using Aggregator

    I am using Captivate 4.  I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
    The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
    Thank you.

    Lenny,
    I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
    Thanks in advance,
    Vince

  • Battery is not charged after using all of my battery. what's wrong? is it about charge machine or my computer?

    battery is not charged after using all of my battery. what's wrong? is it about charge machine or my computer?

    battery is not charged after using all of my battery.
    Of course it isn't — you've just drained it. Plug your AC adapter in and charge it up again.

Maybe you are looking for

  • Macbook Pro Mid-2012 Logic Board replacement, Apple Dragging feet?

    First some background: I have a macbook pro 13" Mid-2012 non retina covered under applecare until Jan. 2016. Starting in late march, i had noticed some performance issues but never took it in as the issue would subside within a day or two. Going into

  • I need to sudo cs delete an encrypted hard drive but get an error "Not a valid CoreStorage Logical Volume Group UUID"

    Ok so I encrypted an internal HDD with DOE compliant encryption, and forgot the password. I am not using a typical mac bootloader so apple C when its booting will not work to delete it before its mounted. I have to do it through the terminal. The dri

  • Three questions: 2 easy and 1 Broad :

    1) how can you tell an object to run a method every five minutes. For example lets say i want program to spit out the square root of 16 to the console every five mintues. how could this be accomplished. 2) i have a problem with classpaths on Windows

  • IN operator in sqlite local database

    New to the whole sql world, im building my first database air application. I have a database that i'm working with Asynchronously. I'm trying to get a sql result that gives me a list of all the entries (rows) that match a predefined list or array. I

  • Help Configuring Hard Drives...

    Hey everyone, Just finished my first build, everything went pretty smoothly.  My only question involves the configuration of my hard drives.  I am running 3 drives, a 40GB IDE for my OS, an 80GB IDE for music storage, and a 120GB SATA for a video edi