Thumbnails do not update after changed are made in the raw module?

I am editing raw files in bridge. The changes that I have made in RAW do not transfer to the bridge thumbnail page when I leave the raw module.  I can see that I have made changes by the little symbols for crop etc. in the thumbnail, but no live changes.  Any suggestions?

Judy Lovins wrote:
I am editing raw files in bridge…
No, you're not.
Bridge is just a file browser, it doesn't open, edit or save any files at all.  It just hands the file(s) to the appropriate application, whether that be Adobe Camera Raw (ACR), Photoshop, Illustrator, Acrobat, or even MS Word.
Check your Thumbnail preferences in Bridge Preferences.

Similar Messages

  • Calculated fields don't update after changes are made

    Hi, I am having trouble with calculated fields updating.  Here is what I have:
    Field a + field b = calculated field c
    Field d + field e = calculated field f
    Then I have another calculated field (call it field g) to add up field c and f.  At first it works fine, but if you change what was input in a b d or e, it doesn't update the calculation in  field g.
    Thanks

    The field calculation order is probably not correct. How you set it depends on what version of Acrobat you're using:
    Acrobat 9: Forms > Add or Edit Fields, then: Forms > Edit Fields > Set Field Calculation Order
    Acrobat 10: http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7de2.w.h tml
    Set it to what makes sense for your form.

  • Orders to stay release (VKM3) even if changes are made to the order

    Hi,
    Is there a setting to keep the sales orders in released status once the order is release for credit through VKm3.
    That is even if the order is release if you make any changes to the order it goes back to credit blocked status.
    Is there any way to stop this from happenin. I want the order stay released even if any changes are made to the order once a release has been done in VKm3.
    Thanks
    Keshi

    Hi,
    Go to the transaction code OVAK,
    Select the correct Credit group and risk category and enter into the features of this combination.
    Here if you check the fields, you can find that there are certain fields which decides whathappens to a sales order when it is released from credit block and then some changes made.
    You can configure these fields to enable your functionality. As I am in different network now, I am not able to give u the correct fields.
    But as per the functionality, it should ideally block the order because the change can even be in price , that is the Credit exposure itself. Hence it should ideally block.
    Hope this helps you to decide.

  • Why Synonym becomes INVALID when changes are made on the related object ?

    Hi all,
    WHY SYNONYMS becomes invalid when changes are made on related OBJECTS ?
    Is there any specific reasons for this.?
    Is there any method or procedures to make the synonym VALID as soon as the we perform any alteration on the related object.
    Thanks
    Himabala

    Synonym will be validated when it is accessed, no need to take an action.

  • HT4858 Is anyone else having problems with shared photo stream URLs not updating after photos are added or deleted from a shared photo stream?

    I have made quite a few shared photo streams and love the idea of sharing easily with a variety of friends and family. The problem in having is that any modifications made to the shared photostream (adding/deleting pictures) are not updated in the URL I have sent to my family and friends. Is anyone else experiencing this? Does anyone have any ideas or solutions?

    Disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream on your Mac.
    Happy Holidays

  • IOs apps not updating after changing country

    Hi all,
    This has been an issue for a while that I have ignored but can no longer.  I originally began using an iPhone and iPod touch several years ago in the US.  3 years ago I moved to Canada, and since then have noticed that apps purchased while I had a USA iTunes account will not longer update unless they are on my device (ie, no updates offered thorugh iTunes).  Once moving to Canada and switching financial info from USA to Canada, and subsequently changing the country of my iTunes store (as I was forced to for via the required credit card for an iTunes account) the original USA apps will not update.  I realize this is going to be an even bigger problems on moving back to the USA here in a few months as all my Canadian apps will no longer update.  What is the solution.  All apps have been purchased under the same iTunes account, the only thing that has changed is the country of the iTunes store (all apps are available in both countries also so that is not the cause).
    Thank you

    Not my issue. Many apps do update fine. 5 pesky ones are being difficult and refuse to update. Tried on various wifi networks with same result. Other applications do update. All the latest as far as iOS is concerned although sadly I am still using an iPad 2.
    What is the same is only that a number of my applications in the App Store fail to update on my iPad 2.

  • PS on ERP not update after changing person responsible on PPM Phase or Task

    I've implemented BADI DPR_FIN_GECCO_ATTR to update additional attributes on the ERP side, such as person responsible and some of the user fields.  In a normal create of the project everything works fine. When only the person responsible is updated in cProjects no update occurs on the ERP side.  Everything is updated properly on the PPM side, there is no error on COCPCPR, but the person responsible field is not updated.  If the person responsible is updated on the PPM side and also another field, like the long text, everything works fine. For some reason, the change of just the person responsible does not trigger a replication on the ERP side.
    Has anyone come across a similar situation?  Is there a way to trigger that the ERP side should be updated?

    Hi Experts,
    I've been able to identify the problem and need help with the solution.  The problem when just the person responsible is changed on a task in PPM is that change is recognized as a change to the object CL_DPR_ENTITY_LINK.  This type of change does not identify the task and insert a record in the change table for the task object.  In method ON_APPLICATION_OBJECT_CHANGED of class CL_DPR_APPL_OBJECT_CHANGE_MNGR the table mt_updated_objects needs to be updated with the task if it is not already present when this type of change occurs.
    My question is how can I get the task object associated with the DPR_ENTITY_LINK object to insert into that table?
    Points will be rewarded for right solution.

  • Bug in newest version of iTunes: last played data not updating after songs are played

    I just downloaded the newest version of iTunes on my Mac. The "last played" data is not updating automatically after a song has finished playing (even after waiting for a while). Sometimes in the older versions it would take 5-10 second for the data to update automatically, but even after several minutes, "last played" still shows as if the song had not just been played.

    RestonMacGuy wrote:
    I did something similar, but not the same: I "played" a few tracks from the iPod (fast-forwarding until about 30 seconds from the end) while the Shuffle was connected to my computer and in iTunes, which then caused the "Last Played" field to be updated.
    The next time I connected my Shuffle, the Last Played values were updated.
    I bet the Last Played was updated after you stopped playing the tracks...IN FACT. if you were watching your shuffle icon, you might have noticed the rotating thingy to the left of the eject symbol, meaning an update was ongoing.
    This will happen AS LONG AS the track has "remember playback position" set.

  • AUTO POPUP OF NOTE CREATION WHEN CHANGES ARE MADE TO CUSTOMER/VENDOR

    Hi,
    When you change Customer/Vendor by VD02/XD02/MK02/XK02 there is the Object Services Toolbox for Object functions next to the title. I'd like the 'Create note' screen to popup as soon as the Vendor or Customer change is being saved. Can you help me?
    Rgrds,
    Gyurka

    Hi,
    When you change Customer/Vendor by VD02/XD02/MK02/XK02 there is the Object Services Toolbox for Object functions next to the title. I'd like the 'Create note' screen to popup as soon as the Vendor or Customer change is being saved. Can you help me?
    Rgrds,
    Gyurka

  • The Change time of the file is getting modified when no changes are made to the file content

    While doing save operation of a MS-WORD file, (in my example "1M.doc" ) with client (Windows 8) and server(either Win 2008 R2 or Win2012 R2). Observing the following scenario.
     After Renames are done(eg, xx.tmp renamed to 1M.doc) , all the file handles are being closed one by one.
    When the xx.tmp file is closed, immediately followed by Create of 1M.doc, the LastWrite time values between Close and Create are same but LastChanged time values are different. The LastChanged and LastWrite times are noted from
    the Close Response and Create Response packets.
    No modification is done on the file between this last close and next create. So, why LastChanged time values are different for the file? We are observing this almost everytime with Win8- Win2k8R2/Win2012R2, but not observed
    till now with Win8-Win2012.

    Hi,
    Is only word files have the issue? You could refer to the articles below to troubleshoot the issue:
    The "Modified time" file attribute of a registry hive file is updated when an application loads and then unloads the registry hive file without making any changes on a computer that is running Windows Server 2008 R2 or Windows 7
    http://support.microsoft.com/kb/983544
    File “Date modified” property are not updating while modifying a file without closing it.
    http://blogs.technet.com/b/asiasupp/archive/2010/12/14/file-date-modified-property-are-not-updating-while-modifying-a-file-without-closing-it.aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • ITunes podcast page not updating after changing feed

    Several months ago I successfully published a podcast to the iTunes Store. The following is the location of my podcast:
    http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=335499017
    Now, I've changed the feed URL as well as some of the details in the feed file (.xml). But the itunes page shows the old info! I made th URL change per the Apple guidelines (using the <itunes:new-feed-url> tag). I placed the new-feed-url tag on the OLD file only. I hope that's the right way to do it! I also created a 301 rediriect FROM the old feed TO the new one.
    Does it take TIME for the change to take effect in itunes?

    The feed URL registered with iTunes is http://www.semantica-portuguese.com/podcast.xml
    There is nothing at this address. It makes no difference what you do anywhere else, until there is a feed file at this URL with the redirect tag in it iTunes cannot take any action.
    I've updated the URL in the old feed file
    Are you saying that the old feed file is at yet another URL? If you originally had another URL, and you placed a redirect tag in that to http://www.semantica-portuguese.com/podcast.xml then iTunes has redirected, and making alterations to the original feed is not going to have any effect since iTunes is no longer looking at it.
    The only way out of this is to place at copy of the feed with the redirect tag at
    http://www.semantica-portuguese.com/podcast.xml

  • BIA Master Data Index Not Updated After Change Run

    In BIA it shows master data 0VERSION table /BI0/SVERSION has 360 records which matches with the number of entries in SE16 /BI0/SVERSION.  One record was added to 0VERSION so now SE16 /BI0/SVERSION shows 361 records.  I did a change run for this infoobject 0VERSION but the BIA index for /BI0/SVERSION still only show 360 records. I expect it to show 361 records after the change run.  Is this a bug?  Thanks.

    Hi Thao,
    I see one of 3 possible scenarios:
    1) You load 0VERSION as a part of master data load (from flat file or another system). You see your 11th record in version "M" after load and then you run change run that makes "A" version of the record. ---> BIA index should be automatically updated. If not - open OSS message to SAP.
    2) You load transactional data in an InfoCube, and it has new value for characteristic 0VERSION. ---> In this case you need to run roll-up of this new load request in the InfoCube to let BIA index be in-sync.
    3) You are modifying 0VERSION manually (e.g. SQL INSERT statement), so system is not aware of new record at all. ---> You need to run the mentioned single-table-index program to update BIA index.
    Is it any of these 3 scenarios, or you have the 4th one?
    Regards,
    -Vitaliy
    Edited by: Vitaliy on Aug 19, 2008 1:59 PM

  • Find and replace in files does not refresh when changes are made

    Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
    There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
    Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
    Message was edited by: DMilkes

    Hi there
    To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
    As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
    On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
    As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
    Hopefully this helps... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Screen.PrimaryScreen.Bounds not updated after change in resolution

    Hello,
     When my application changes the Resolution and then calls
    System.Windows.Forms.Screen.PrimaryScreen.Bounds
    call returns the previous Screen Bounds instead of the recently updated one.
    How can "System.Windows.Forms.Screen.PrimaryScreen.Bounds " be forced to return the updated screen bounds ?
    Is this a bug ?
    Thanks
    Anup

    Hello VargheseA,
    Since this issue is related with windows form, i move it to the windows form forum, there are windows form experts who would help you.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Project Variables Labels Not Updated After Change in OBPM 10GR3

    Hi all,
    I had previously deployed a project to the Weblogic Enterprise Server with a set of project variables , layouts, presentations and views.
    Now, I changed the labels to the Project Variables using Studio. Made them all Upper Case and re-deployed the project to the Weblogic Enterprise Server.
    I restarted Weblogic. I restarted the engine.
    But the Project Variables labels in the views did not change from being lower case to upper case.
    Why is that so?

    Anybody on this?
    Why do the labels of Project Variables not change in Weblogic Enterprise Server 10GR3 although they change in BPM Studio?
    I also tried deleting these project variables from the Engine Tables --> PPROCINSTANCE and PPROCINSTEVENT
    Restarted Weblogic
    Restarted the Engine
    Restarted the workspace
    Redeployed a fresh BPM project.
    But nothing changed?

Maybe you are looking for