Ti4200VTD8X & WDM Capture Malfunction

Okay, this is my last attempt at fixing this problem before my card goes down to the 100 yard line for a little target practice.
I have:
Antec 1080 tower w/ 430W PS, 3.3V line running at 3.28V
Asus P4S8X, AGP Driver loaded, BIOS updated
512M Kingston DDR 2700, 1 stick
MSI Ti4200VTD8X, 43.51WHQL Driver
WD80Gb HD
WinXP Home Sp1
Blood type A Pos
Shoe size 10
Problem:
When I load the WDM Capture Driver, v1.27 (or any other version for that matter), it will allow me to reboot, it PnP's the drivers, and works for that session.  When I reboot the system, it hangs up after the XP logo screen, and then reboots to safe mode.  I set it up to show the BSOD and it displays a DRIVER_IRQL fault with NVCAP.EXE.  I have to unload the WDM drivers for my computer to function.
I went into the selective boot thingy from msconfig, and set the PCI IRQ's so they aren't dynamically assigned.  Didn't work.
I've rolled my drivers forward and back, each time using detonator destroyer or just hacking the registry to remove all reference to Nvidia.  I have even tried the virgin chicken sacrifice and beta drivers.  Didn't work.
In researching this issue, I've discovered that I am far from alone.  The problem with the WDM capture drivers and the Nvidia cards seems to be of epidemic proportions.
The most consistent problem I see is those who install the WDM capture drivers are experiencing a code 10 error.  I get this too, but only after a reboot.  
There are literally hundreds of postings on the net about this same issue.  Folks are updating their drivers religiously, and trying this or that.  Most of them are quite computer literate.  We have all had to become quasi engineers and programmers to deal with these problems that simply wouldn’t be tolerated in any other industry.  Think about it.  If you bought a new car and had to completely rework the engine before it would take you to the Quickie Mart for your daily ration of carbs, wouldn’t you be slightly irritated?  
Why is it that we can’t expect to be able to plug in a device, let the nifty PnP feature load the drivers and have it work correctly the first time?  Why are we constantly on pins and needles waiting for that next driver update that may or may not solve the problem that everyone is experiencing?
I spent a lot of time and money building my system.  I wanted a video card that I could play games and watch video on.  Instead, I spend my spare time hunting for the elusive fix for this weeks problem.
Should I toss the Geforce and buy a Radeon?  Spend another $300?  I look at the forums for other chipsets, and they are having their problems too.  
I’m sorry I’m on a soapbox, but we need to demand more of these companies who are taking our hard earned money for products that have no business being released until some/all of the bugs are worked out of them.

Actually, I don't like cards that are display adapters and capture card combo. In the fact that not only quality will drop in fps and often problematic. Same to Radeon side... VIVO and All-In-Wonder...
Your problem is most likely IRQ sharing, get us a list on your com's IRQ settings and we'll see if we can detect any error there.
By the way, since you are so keen in having a multi-functional com, why not get a seperate DV/TV encoder/decoder card? They work better than VIVO and All-in-Wonder, and they only take out 1 PCI slot...
All the Best... :D!!!

Similar Messages

  • Hibernate or Stand by fails in WinXP after installing WDM capture driver

    Hi, I have an MSI MX440 card with video in and out.  The card works like I expected, games or capturing video works fine.  
    I first installed the card on my Windows 2000 machine, about a year ago.  After installing the WDM capture driver it stopped going in Stand by or hibernation mode.
    In the beginning of this year I bought a P4 configuration but I did not install the WDM driver.  Some time ago, I gave it another try on this system but since then I can no longer go into hiberation mode or stand by.  The computer says 'Preparing to go standby' and it does not work, it returns to the desktop with another message box 'System not in stand by', 'The WDM Video Capture driver universal device is qt the cause that the computer no longer goes into stand-by, if the problem keeps existing you will need qn updated devicedriver'.
    I have currently the Nvidia driver 2.1.20 running, the driver is not digataly signed.

    Hi, I have an MSI MX440 card with video in and out.  The card works like I expected, games or capturing video works fine.  
    I first installed the card on my Windows 2000 machine, about a year ago.  After installing the WDM capture driver it stopped going in Stand by or hibernation mode.
    In the beginning of this year I bought a P4 configuration but I did not install the WDM driver.  Some time ago, I gave it another try on this system but since then I can no longer go into hiberation mode or stand by.  The computer says 'Preparing to go standby' and it does not work, it returns to the desktop with another message box 'System not in stand by', 'The WDM Video Capture driver universal device is qt the cause that the computer no longer goes into stand-by, if the problem keeps existing you will need qn updated devicedriver'.
    I have currently the Nvidia driver 2.1.20 running, the driver is not digataly signed.

  • What is nVidia WDM captura driver???

    I install the drivers for wdm video capture that I found in the msi web page for my msi fx 5200 TDR128 but I don't now what this driver is for. Also I get a code 10 in the device manager tha says the nVidia WDM video capture(universall) cannot start. it has a yellow mark on it. Does anybody how do make it work? What are this drivers for?
    Thanks
    PhanosP

    WDM video capture are for... capturing video :D that is if your card has a video input. If you have video input on your card and you get a yellow "!", welcome to the club !!!
    There is a bug (looks like it !) where the WDM drivers fails to load correctly with the main nVidia video drivers.
    You can make it run properly by checking this thread . It worked for me. The only problem is that this is an old version driver that does not have all the latest features and I think it will not work for your FX.
    You should not have problem with your new FX5600. Probably having error because your card does not have the video input.

  • WDM Capture Driver: Device Cannot Start (Error 10)

    I have GeForce3 Ti200 with S-Video In, Out and TV out. I'm trying to run Virtual Dub to view my PS2, which is going into the S-Video In. It said I needed capture drivers, so I went to http://www.nvidia.com, got the ones that come with the Personal Cinema thing and installed them. Those didn't work. Came here and tried the drivers here, those didn't work. Tried other drivers and those didn't work. They all said "Device cannot start (Code 10)"
    I've tried 1.1.6, 1.1.7 and 1.1.9. Any ideas? I've searched on google and seen some stuff about turning off ACPI but I use ACPI, so I'm not willing to do that.

    God I love forums, cause 99.9% of the time someone else has encountered the same problem and then hopefully someone else who found a fix, posts that fix.
    http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=5847&boardid=9&sid=db40f75790c98440731e8c20eea03e5b
     Much thanks to Nixus, and everyone who had solutions, but I found a variation of Nixus' solution was what worked for me so that's what I'll recommend.
    "I downloaded the bios files from http://tw.msi.com.tw/autobios/SVga/Bios/Ms8850/v111/ and then downloaded NVFLASH.EXE and booted in dos and flashed the card i had to force the flash though it had some conflict of data or something but i knew it was the right bios and i had made a backup of the current one plust the card has dual bios so i wasnt too worried and it all worked out fine.
    Goodluck with gettin all your cards workin
    Cheers
    Nixus"
    This is what I did anyway:
    1) went to http://www.msi.com.tw and dragged the mouse over 'support' and then clicked on live updates 2. Installed this program.
    2) went to http://tw.msi.com.tw/autobios/SVga/Bios/Ms8850/v111/
     which Nixus brought up,
     and clicked on the install button. Which installed some other software to make this button work, then installed the flashing program. Held my breathe while it updated the vga bios, normally I'd do this from a clean dos 5.0 boot disk I have, and voila, problem fixed.
    Well, not quite. After installing updated vga bios, all nvidia drivers were zapped. Or at least not installed right.
    3) Add/remove programs, uninstall nvidia wdm drivers and vga driver for the 1 billionth time. Reboot.
    4) Install 30.82 whql certified ones, rebooted.
    5) Install wdm 1.19 drivers, reboot
    6) Go into system, and now instead of the exclamation point alongside the nvidia capture driver with that error, it just shows as working. Tried virtual dub, btw program rocks except for that 2 gig file limitation, and changed the source to composite and bingo, video in again.
    So long story short, I updated my 8850 to the updated bios, uninstalled all old nvidia drivers, installed 30.82 and then wdm 1.19 and it worky again. Haven't tried it with det4 drivers yet, didn't feel like pressing my luck.
     If you search in this vga forum using the word "capture" without the quotes, it seems this problem with the 8850 and others is QUITE common :(
     Whatever...updated bios fixed it for me...fine...so long as it's fixed. Bad enough I gotta boot into 98se to use my old large, legal sized mustek scanner on account of no win2k/xp drivers, don't want to have to boot into 98crash_edition ( well technically all 95-me could be called that ) everytime I want to cap something.

  • GF4 Ti4600 Error 10 after installing WDM capture drivers

    Hello everybody,
    Maybe one of you knows a solution for this problem.
    I'm using a MSI-8872 (Ti4600) on an MSI-6367 Nforce motherboard. WinXP pro is the OS. I'm trying to use the video-in  on this videocard. After installing the WDM capturedriver i get an error 10 on this device "device can't start".To be really sure that this isn't an resource conflict i removed all extra hardware (soundcard,firewire,modem) and disabled all integrated peripheralls on the MOBO (serial, parallel ports, LAN audio, modem). After this i did a clean install of WXP detonator 30.84 and WDM 1.16. Still same problem !!!!!!!!!!! Tried also with some other combinations of detonator and WDM but the problem remains.
    Does anybody know:
    1) If this is a more common problem with this videocard (maybe in combination with Nforce chipset)
    2)A solution
    Greetingzzz,
    Foetsjie

    Hello, i have the same problem on WinXP Pro.
    So I tried to use newest vga driver and capture WDM driver 1.08 but the problem is same still.
    Do you  know where i can download last BIOS for my VGA card?
    Thank to all )
    Best regards
    Jiri

  • G4MX440-VT8X128 WDM capture problem

     ;(
    I've got a problem using the G4MX440-VT8X128 http://www.msicomputer.com/product/vga/v...4MX440-VT8X128.
    On device manager, everything is OK, nothing red neither yellow.
    When I try to capture, it captures only a blank movie / picture.
    Any hint to give me ?
    P.S.: I've tried with Windows Movie Maker and Virtual Dub, my WinProducer which came with the box bundled is not working properly, it (only winproducer) crashes during the boot (any hint about this also ?). ;(
    AMD 1700+
    Gigabyte 7VAXP
    256 MB DDR Samsung
    G4MX440-VT8X128 128MB DDR Video In/TV-OUT

    ;(
    the correct URL for the board page is http://www.msicomputer.com/product/vga/vga_detail.asp?model=G4MX440-VT8X128
     ;(

  • [Radeon] X800 XT PE WDM CAPTURE DRIVER PROBLEM

    I have a problem whit my MSI RX800 XT PE 256MB VIVO Edition
    My Specs:
    P4 3.2 Ghz Prescott
    Asus P4C800-E Mobo
    2 Gb DDR Ram Corsair
    Audigy 2 ZS
    Sata Raid (80gbx2)
    In the device manager i get and exclamation saying "this device cannot be initializated error code 10"
    I try EVERYTING in this world  , Install Catalyst versions 5.1, 5.2, 5.4, The new 5.5 , versions of 4.x, even 3.x, DNA drivers, Omega Drivers, Ati DAO thing so many of them  , MMC so many versions, even webtv, always using drivecleaner, i try updating the bios of my board, outdating the bios of my board, updating the bios of  my VIDEO CARD, REINSTALLING windows  , i try versions of windows xp whitout sp, whit SP1, whit SP2, I update the drivers of my board    , last direct X, changing the settings of the board, changing settings in windows, ....     even cleaning my card and is brand new, hummm and the conclusion.... always the same damm result the yellow thing sayin "error code 10, this device canot be initiblablabla....."
    What can I do, i need help, ati dont solve my problem , all the people say the same thing "reinstall here, drivers out of date, install the last version, bla bla bla" i know....
    Thanks for your help....

    You re not alone.
    Not problems like yours but....
    I get all the time "No signal"  trying to connect to TV or VCR.

  • [GeForceFX] WDM video capture image size and position

    Hello to all.
    When I do video capture with my MSI FX5900-VTD128, the picture is not centered correctly and not at the right size either.
    Let's take for example that I want to record TLC. I always get a black vertical bar on the left side of the capture video and the TLC watermark is also missing on the screen. In other words, if I could move video capture screen to the left, I would regain the full video frame.
    One of my friend has a different video capture card and he is able to correct the screen size and position. Is this possible with my video card ???
    I have a lot of shaded options in my nVidia WDM setup. Things that I cannot change. Any clue on how I can resize my capture video and how to eneble shaded option ???
    Thanks !

    Man... I have VHS tapes that I want to put on DVD... It reallly does not work... It looks like if the image was zoomed in and a little bit to much on the left... 
    Does someone know if it is possible to adjust zoom level and image centering on the nVidia WDM capture video screen ???
    Need some help here ! 

  • Win XP BSOD while capture video on MSI GF FX 5900XT-VTD128

    Hello.
    I have such a problem. While capture video (overlay mode, 720x576) very
    often (but not always) Windows XP crashes on BSOD with the following error:
    DRIVER_IRQL_NOT_LESS_OR_EQUAL
    STOP: 0x000000d1 (0xF0504000, 0x00000002, 0x00000001, 0xF7A2CE57)
    nv4_mini.sys - address F7A2CE57 base at F7A1A000, datestamp 4061d74b.
        My system configuration is:
    Hardware: MB Epox EP-8RDA3I (latest BIOS version), CPU AMD Athlon XP 2400+,
    RAM DDR PC3200 512 MB dual channel (Kingston), Video MSI GeForce FX 5900
    XT-VTD 128 (VIVO, Philips SAA 7114). NO overclocking!
    Software: Windows XP Prof SP1, DirectX v.9.0.b, Nvidia Nforce driver v.4.24
    WHQL, Nvidia ForceWare driver v.56.72 WHQL (default settings), MSI WDM capture driver v.3.08 (late). Capture software: VirtualDUB, iuVCR and any other.
        What anyone will advise me?
        Thank You.
        Best regards, Dmitry.

    61.21 driver is a beta driver. its not 100%. wait until they release a full working driver. it will be released on http://www.nvidia.com.

  • Video capture

    I have a GeForce4 MX 440-VTP graphics card and have the video in and out adapter connected. The problem I am having is with the video capture function. When I start recording the streaming video from either my analog video camcorder (composite input)or VCR (S-Video input) I get a horizontal white bar that takes up the middle third of the screen. The bar does not show up during the recording but is there during playback.

    Thank you for your help. I searched on the net and everyone seems to have the same solution for the problem. They say that the problem is caused by the macrovision copy protection and that one needs to download an older WDM capture driver (v1.08 for example) and the problem will go away. I am going to give this a shot this evening and will post what happens tomorrow.
    I installed the older capture drivers and now the video capture works just fine. So the solution is to get older WDM capture drivers that do not have the macrovision copy protection in them.

  • Msi g3 pro capture format

    hello,
    i just got myself a geforce 3 pro 64mb with tv in and out.  now, i'm using winproducer3 and 1.08 wdm capture drivers (the only ones that work for me as far as i know.)  i recorded a simpsons episode from my dvd player and discovered that the file size was over a gig.  now, the quality isn't blinding sharp, but it is pretty good.  i tried to change to avi from mpeg and re record it, but i can't get any other format other than avi.  can someone help me out?
    thanks
    richard

    some excellent guides here link
    I found you can get trapped using Winproducer/Wincoder, if you plan on compressing more after capture.  I have similar card to you and these guides work good.
    NTFS will help if you plan on doing big files as virtualdub can corrupt frames when filesplitting

  • Need help configuring WDM driver

    Hi all, I have a 7900gt-vt2d256e, I downloaded and installed display drivers (v 93.71) for the vga card, rebooted, everything was fine, then I downloaded wdm capture drivers (v 4.13), after running the setup, it copied some files and asked for reboot, after reboot windows detected two new devices (nvidia wdm A/V crossbar & nvidia wdm video capture (universal) ). It started to search for drivers for both devices (as I selected: install the driver automatically) and installed the drivers for both. After installation, for nvidia wdm video capture I get a code 10 on device manager and hence I am unable to record analog video through s-video or composite. For nvidia wdm A/V crossbar there is no warning of any sort on the device manager. I've also tried removing the wdm driver using drivercleaner and reinstalling by clicking have disk and specifying the exact file but i get the same code 10, plz help.

    I did install a mercury TV Tuner card, but then I disabled it in the hardware profiles, reinstalled the wdm drivers (removed them using drivercleaner),restarted my PC, but my problem wasn't resolved, then I removed the TV Tuner card completely and tried again but still I wasn't able to resolve the issue. Thanks for the quick reply anyway.

  • Premiere Elements and SDI Capture?

    Hi - I'm a Premiere Pro user but a customer is setting up a retail video capture situation that will be operated by non-video folks. The customer wants to use a Canon XA-25 to stream video via SDI capture to a computer. Will Premiere Elements do that?

    Rich Hall Reps
    As far as I can tell Canon XA-25 is not a mini DV or HDV camcorder with an iLink for DV or HDV data capture firewire into a Premiere Elements capture window. In that regard, Adobe has removed that feature from its latest version 13/13.1. Premiere Elements 12/12.1 is the last version to have this feature which has a classical history of working only with a firewire connection. In Premiere Elements 13/13.1, Add Media will not include DV Camcorder or HDV Camcorder. The surviver is Webcam or WDM with description "Capture video from webcam or other WDM compatible device".
    But, my interpretation of what you are seeking is not DV or HDV capture firewire, but rather live streaming of uncompressed video from the Canon XA-25 using the Canon SDI Output
    HD-SDI - Canon UK
    Canon XA25: Our New Favorite Camera - Association Studios
    The following Adobe document was pointed to 3 months ago by a staff member responding to a user question on Live Video Streaming using Premiere Elements.
    Premiere Elements: How do capture live / streaming video?
    The link pointed to does not appear to be updated for 13/13.1 which was released September 24, 2014.
    Adobe Premiere Elements Help | Capture video from camcorders and webcams
    Based on the above, I am not sure if the Canon output can be made to work with the Add Media/Webcam or WDM choice with the Canon being recognized in the Capturing Source field of the Webcam or WDM Capture Window. Do you have any version of Premiere Elements to explore this possibility?
    ATR

  • FX5900XT-VTD128 capture problem

    Hi,
    I read the many posts about capture problems but did not recognise my issues.
    I just got FX5900XT-VTD128 and I am trying to get it to capture with WinDVD creator (bundled). WinDVD would start but then it would hang without listing any capture device.
    I installed the latest WDM drivers from the nVidia site (2.20_wdm-vivo.exe)
    Device manager list the following devices under sound, video and game controllers:
     - nVidia WDM A/V Crossbar (12-2-2003)
     - nVidia WDM Video Capture (universal)  (12-2-2003)
    The multimedia tab in control panel show the following under "devices"
      under "Video Capture device" -->  -Microsoft WDM Capture
    After reading the posts, I suspected a WDM driver problem so I did the following:
       1- removed both nVidia WDM devices from device manager
       2- removed Microsoft WDM Capture from multimedia devices
       3- removed nVidia WDM drivers with Driver Cleaner
    I rebooted and confirmed that no nVidia WDM devices were present in Device manager and that no WDM capture device were present under multimedia capture devices.
    I re-installed nVidia WDM driver 2.20 and rebooted. Windows plug and play recognised both nVidia WDM devices and installed drivers for it.
    When I checked, both Device manager and Multimedia capture device were back as they were before the driver re-install yet WinDVD still hang when I click "capture" (Window is still alive, I can kill WinDVD manualy but I would then not be able to restart it without first rebooting).
    I tried Flycap and VirtualVCR with no better result, they hang.  
    I am using Win98 SE on a Gygabyte  GA-7N400-l motherboard with AMD Sempron 2400+ CPU and 512MB RAM. I have no other card in the PC.
    I am using nVidia driver 66.94 from the file: "66.94_win9x_english.exe"
    Any insight would be greatly appreciated.

    also refer to this post....5900 Video Capture
    its name is fx900xt capture and got 5 thumbs on the forum title for easy to find....

  • Vivo wdm does not work with MSN messanger

    ok so the WDM capture device works fine with intervideo wincimena Winproducer but MSN messanger refuses to see the video feed. I have a basic Cam corder plugged into the rca video in jack (not svideo).
    I have searched forums and newsgroups and it seem to be a common problem with no answer other then maybe upgrading to winxp with SP1. I am currently w2k and not really willing to upgrade. I have tried many versions of the WDM driver up to the latest 2.20.
    Has anyone ever got this to work anywhere.

    also, have u try to install the lastest driver from http://www.nvidia.com

Maybe you are looking for