Time and/or Date incorrect after moving/copying/importing

This has been going on for years and has messed up hundreds, maybe more, of the time/date on my photos in Aperture.
If I select my entire photo library (typically preset to 'Date - Ascending') in Aperture, I can find hundreds of photos out of order. When I look at them in 'Info', the time and sometimes date has changed by several hours. I'm not sure if this is an Aperture thing or Mac thing? Over the years I have moved and/or copied photos from smaller HDDs to larger HDDs to eventually a NAS unit and/or from iPhoto to Aperture.
I have made calls to Tech Support, but they have always made me feel as if I made some mistake on my end or I didn't set the time correctly to begin with (now this could be correct with the P&S I share with my girlfriend, but very rarely with my DSLR). But I also explained that it was random (3 to 5 photos in a set).
So today as I was trying to update some of my photos, I came across some photos (and videos) I took last year with my iPhone (my iPhone always has the correct time and date or 99.9%). I originally uploaded these to an old iPhoto library I still have (all the dates and times are correct). These same photos and videos (55 over a 3 day period) were moved to my Aperture library some time ago and 3 of the 55 have the incorrect time by -7 hours (ie. 3:30 pm is now 8:30 am).
Why does this happen?? I have not set any time changes to these photos. If I did, they would all have the wrong time and not just 3 of them would be off.
Is anyone having this issue and if so, was there a way to get the corrcet time/date from the photo hidden deep down in the EXIF? This is driving me crazy.
Here are some screen shots of the same photo in iPhoto and Aperture.
iPhoto 5:28:09 PM - Correct
Aperture 10:28:09 AM - Incorrect -7 hrs
TIA if anyone can help. I just don't have the time to go back and try and change all these photos.
Narvon

DF
Thanks for the reply, I will try to post the screenshots again (they still show for me, odd?).
Anyway, this is not a zoning problem. This is a moving or copying problem.
The photos I tried to show from the screen shot I took last year at a concert in Coachella (same time zone as my residence in Redondo Beach). The shots were taken using my iPhone which has GPS and constant updating of Time. All the photos and videos show up correctly in Places (GPS) and all the correct times show in iPhoto.
The issue occurs when the photos are moved to Aperture. Randomly the time has changed to -7 hours on a few photos. This same randomness has occured to hundreds of my photos that I have imported into Aperture over the years. As I said before, Tech Support and everyone else has placed the blame on me within my camera settings or improper importing.
Now that I use my iPhone more often, I have proof that the settings are correct and that Aperture or Finder or ?? within Apple has changed the Time randomly. Also, if I had 'Accidently' opened the 'Time Zone' brick when importing (as suggested by Tech Support), all the photos would have the incorrect time and not just a few random ones.
iPhoto original from iPhone - Time 5:28:09 correct
Aperture photo from iPhoto - Time 10:28:09 incorrect -7 Hrs
Thanks again,
Narvon

Similar Messages

I am getting an error message that "A copy of Firefox is already open. Only one copy of Firefox can be open at a time" and I don't have any copy open.

I am getting an error message that "A copy of Firefox is already open. Only one copy of Firefox can be open at a time" and I don't have any copy open. How do I correct this problem? I really like firefox because it runs many technical programs on the web that do not work with safari. I have FireFox version 32.0.1 installed on my MacPro PowerBook OS X 10.7.5. My activity monitor does not show any FireFox activity, so do not know what it is seeing

This worked, I used the method described in this link http://forums.mozillazine.org/viewtopic.php?t=365156, and opened the Mozilla profile screen with the terminal on my mac, using the language given in the links. Then I duplicated my original profile to save the bookmarks, etc. Put them in a folder listed Duplicate profile with the date. With the open profile screen, I deleted my original profile, created new profile folder and then a new profile. Note that profile cannot be created in the system library, it must be created on the disc, because the library will not allow writing into it. After I created my new profile folder, I dragged all my old information into it, and it worked. Firefox closed and the error disappeared. You must be VERY careful to make sure Firefox is closed anytime you are doing anything with the profile folders. I think that is what caused my original problem.

Time and GPS data windows

Hello all
I was presented this sample 1080 frame and was asked if I can do this if time and GPS metadata were part of the video recording. In other words, how do you burn in this data in the video itself. I have P Pro CS 6 @ home and am a complete novice to video editing. Final product may or may not need this, more curious as to how its done - special camera system or in post processing?
Thanks!

If whoever shot the video recorded time of day timecode synced from a GPS receiver that was close to the camera (in your case that looks like it would mean mounted in the helicopter), you can use the time code data to match your GPS metadata to the video. I use an automated process to incorporate the the metadata into the video, but the process is all done with custom software that the CEO of our company wrote. The other people I've seen incorporating GPS metadata into video are also using customized, proprietary processes. If you're adding the data in post, you will have to translate the data into Premiere titles or After Effects text keyframes or something else that you can overlay on the video.
You can also use hardware during your shoot to overlay the GPS data onto the video. I don't use any products that do this, and I don't know how easy they are to find for purchase, but there definitely are people in the geospatial sector who feed video through a GPS-aware piece of video processing hardware that overlays time and position data in real time. In this case you would feed video (most likely through HD-SDI) from your camera to the GPS overlay hardware and then to a recorder.
There certainly aren't any GPS features built into Premiere Pro. If you want to add titles manually, you'll have to match the time code with your GPS data and make a new title each time the GPS info is supposed to update. GPS data is usually some form of table or spreadsheet with time, coordinates, and other positional data, so you can find the correct time in the video and make a title that includes the corresponding coordinates for that time. If you're doing this for more than a few seconds of video, it will be an unreasonably long and tedious process, but it is possible.

Select Records between Begin Date/Time and End Date/Time

Hi, I need to select records from table GLPCA where the CPUDT and CPUTM are between a START DATE/TIME and END DATE/TIME.
I have the below logic from an SAP Solution, but it doesn't seem to be working right in my opinion. It is picking up records earlier than the date ranges. Can anyone tell me how I might be able to accomplish this? I'm hoping this is an easy one for the ABAPPERs...
Thanks,
START DATE 20091022
START TIME 125736
END DATE 20091022
END TIME 135044
CPUDT 20091022
CPUTM 100257
      SELECT * FROM GLPCA
         WHERE ( CPUDT >= STARTDATE AND ( CPUTM >= STARTTIME OR ( CPUDT <= ENDDATE AND CPUTM <= ENDTIME ) ) ).

Thank you all! I ended up using the following:
SELECT * FROM GLPCA
          WHERE RYEAR IN L_R_RYEAR
            AND ( ( CPUDT = STARTDATE AND CPUTM >= STARTTIME ) OR CPUDT > STARTDATE )
            AND ( ( CPUDT = ENDDATE   AND CPUTM <= ENDTIME )   OR CPUDT < ENDDATE ).
This child was born from the following thread that was found:
update date and time of client record

UTC Date Time and Normal Date Time

Hi All,
1. How UTC date time and Normal date time differs in siebel.
2. If legacy data needed to be loaded into siebel, in siebel few fields are date time and UTC date time fields. what would happen if we load both normal date time and UTC date time without considering them techinically?
3. UTC date time holds any specific format in physical database? If we want to load legacy data to UTC date time format what is the query to manipulate it?
Thankyou
Sean

Sean,
Please check document below, I believe it has most of the answers to the questions you have:
http://download.oracle.com/docs/cd/E14004_01/books/GlobDep/GlobDepUTC.html
Hope it helps,
Wilson

Difference between a starting date and time and ending date and time

Hi All,
I need to bring out the difference between a starting data and time and ending date and time. Difference should be in time I mean it should be in hours or minus or seconds.
I am sure there must be a Function module for this, Has anyone of you been in search of this kind of FM, Kindly suggest me. It is urgent.
Thanks
Mahen

Hi,
Check this out.
data : date1 type dats ,   " System data type for Date (sy-datum)
       date2 type dats,
       time1 type tims,      " System data type for time (sy-timlo)
       time2 type tims,
       days type i,
       scd   type i,
       t_mt type i.
days = date1 - date2. " Diference in days.
Scd = time1 - time2. " diference in seconds.
t_mt = ( days * 24 * 60 ) + ( scd / 60 ).
total diference in minute
<b>Reward Points & Mark Helpful Answers</b>

Modification dates change when moving/copying between hard-drive and flash

I use a flash drive to store most of my work-related documents on. That way, I have them when I'm at school (on a Windows XP computer) and at home on my Mac OS 10.3.9. I
try to occasionally back-up my flash drive by dragging it's contents to my Mac. Copying in this direction USUALLY retains the appropriate modification date.
However, if I move things from the Mac to the USB drive (I occasionally make changes to a file on the Mac when my flashdrive isn't handy), the modification date changes to the copy/move date. Is there a way around this? It alters the information about the file and sometimes makes a version look newer than another version of a document. When in reality, it’s older--it’s just been moved/copied and the date changed.
I often move things back and forth for backup purposes, but if it keeps changing the dates on it’s own, it’s impossible to tell which is REALLY the
most current copy/version.
Is there a fix so that copying and moving files between volumes does NOT change the modification date of the file?
Powerbook G4--12 in.--1.33 GHz Mac OS X (10.3.9)

Hi, teacher. When my Lexar JumpDrive Secure is formatted as a MS-DOS volume so a PC can read it, the last-mod dates of files that I copy to it are changed to the date and time of copying. When it's formatted as a Mac OS Extended volume, the original last-mod dates are copied to it unchanged. Looks like you can thank Bill Gates for the inconvenience: apparently it's a DOS file system "feature". Don't you wish you could use Windoze all the time?
On second thought, the files really are changed when you write them to a DOS volume, because the DOS file system has no place to store the metadata about your files that a Mac pays attention to and a Windoze box doesn't. So when you write Mac files to a DOS volume, that metadata — which is part of each Mac file — is simply discarded, causing the last-mod date to change.
Message was edited by: eww

How do I run an Apple Script only when the computer is awake at the specified time and NOT upon waking after the specified time?

I've been using Steve Lambert's SelfControl to block myself from certain time-sucking internet sites for a certain period of time every day. I've automated the program launch using an AppleScript that runs based on an iCal alarm, but the problem is that if my computer has been asleep or shut off, the script will run as soon as I wake it up or start it up, and that can be very inconvenient if I'm intending to use my computer not during the hours when I intended to restrict access to such websites.
So, is there any way to schedule an AppleScript to run *only* if the computer is running at the designated time and not upon waking/starting up after the alarm has passed if the computer was asleep/off?
I started investigating launchd, as I understand this is the successor to cron/crontab in OS X Lion, but it appears that launchd has the same behavior I dislike in the iCal alarm approach--the script will run upon waking even if the time when it was supposed to run has already passed...unless there is a way to change this behavior?

The obvious/easy solution would be to add some logic to the script to see what the time is.
If you expect the script to run at, say, 1pm, but the script checks the time and sees that it's 5pm then you can assume the machine was asleep at the time and thefore you can bail out gracefully.
if (hours of (get current date)) = 13 then
-- it's sometime in the 1pm hour...
end if
You can fine-tune the check as much as you like

HCM Time and Attendance - data requirements

Can anyone help with what data is required from an external time and attendance collection application.
E.G. First Name, Last Name, Emploee Code, Location, Clock in, Clock out and the big one is an 'hours calculated' data required?
Regards
Ray

you would some javascript to refresh
but this works in standard without doing any extra coding
or yoiu can check this
The flag event.target.dirty should be set to true at an appropriate
position (probably form:ready event) for adobe reader versions < 9.
Given below is a sample (javascript):
if ( xfa.host.version < 9) { //handles 8.x.x and previous
event.target.dirty = true;
ie
During the initialization of a PDF form, Since 'dirtyState' is a
property of Reader, and when we open a PDF form, reader would set that
property as "false" automatically. That's why the dirty state could not
be changed to true in some event (like, initialize or Form:readey).
Inorder to set the dirty state to ture, we need to set it after the
initialization of the PDF form. Otherwise, the dirty state would be set
as false during the initialization by default.
The solution would be that they could try this script :
ContainerFoundation_JS.setGlobalValue(event.target, "saveDirtyState",
true);
SaveDirtyState is a property used by ZCI code to judge if a PDF form is
dirty or not.

Why do i have to restart my iphone 4 to connect to cellular data network after moving out of wifi range?

Whenever I move out of a wifi zone, I expect my iphone to connect to cellular data automatically. But this doesn't happen. I have tried turning flight mode on/off and also tried turning cellular data on / off couple of times, but nothing works.
I only get the cellular data connection back after I restart my iphone.
I started having this problem after upgrading to iOS7.
Any idea how to fix this?

Hi beingkejo,
Thanks for visiting Apple Support Communities.
Toggling Airplane mode and cellular data are good troubleshooting steps. If your iPhone still does not connect to cellular data automatically when Wi-Fi disconnects, I recommend the additional steps in this article:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
All the best,
Jeremy

Daylight Savings time, and how dates are stored internally and displayed

This is probably a question that appears here annually, but I couldn't really find clear answers, so I'll try asking this in my own words:
I'm in the Eastern timezone, and this Sunday, we'll be turning our clocks back an hour at 2:00 AM. That means that accordign to us humans, the time 1:30 AM will occur twice on Sunday.
I've got an Oracle application that runs every 5 minutes around the clock, and it selects records from a certain table whose updated timestamp (TIMESTAMP(6)) is greater than SYSDATE - 5/1440, meaning any record that was updated in the last 5 minutes. Will we have a problem with some records being processed twice on Sunday morning? I'm theorizing that everything will be OK, that internally, Oracle stores DATE fields using something like an epoch which then gets interpreted when we display them. An epoch value will continue to grow each second no matter what “time” it is according to the U.S. Congress.
A simpler way to look at the question might be as follows:
If you store SYSDATE in a DATE column in row “X” at 1:30 AM before the time change, and you store sysdate in row “Y” exactly one hour later, will Oracle say that X’s timestamp is 60 minutes less than Y’s timestamp? All fields that are related to my particular situation are either DATE or TIMESTAMP(6).
We use 11g.

>
That settles that! Thank you! My theory was wrong! I appreciate the help.
>
You may think it settles that but, sorry to burst your bubble, that doesn't really settle much of anything.
One thing that was settled is the answer to this question
>
But are they talking about what you can EXTRACT and DISPLAY from the field or what is actually STORED internally?
>
which is, as Mark stated, they are talking about what is stored internally.
The other thing that was settled is that you will pull the same, or mostly the same, data twice during that one hour. I say 'mostly the same' because of the major flaw your extraction method has to begin with.
>
If you store SYSDATE in a DATE column in row “X” at 1:30 AM before the time change, and you store sysdate in row “Y” exactly one hour later, will Oracle say that X’s timestamp is 60 minutes less than Y’s timestamp?
>
No - they will have the same time since 'one hour later' would have been 2:30 AM but the clock was turned back an hour so is again 1:30 AM. So the second time your job runs for 5 minutes at 1:30 AM it will pull both the original 1:30 AM data AND the data inserted an hour later.
And Oracle will say that data stored in row "Z" exactly 45 minutes later than "X" at 1:30 AM will have a date of 1:15 AM and will appear to have been stored earlier.
Your method of extracting data is seriously flawed to begin with so the daylight savings time issue is the least of your problems. The reason is related to the answer to this question you asked
>
do people avoid using DATE and TIMESTAMP datatypes because they are too simple?
>
That method isn't reliable - that is why people avoid using a date/timestamp value for pulling data. And the more often you pull data the worse the problems will be.
>
I've got an Oracle application that runs every 5 minutes around the clock, and it selects records from a certain table whose updated timestamp (TIMESTAMP(6)) is greater than SYSDATE - 5/1440, meaning any record that was updated in the last 5 minutes
>
No - it doesn't do that at all, at least not reliably. And THAT is the why your method is seriously flawed.
The reason is that the value that you use for that DATE or TIMESTAMP column (e.g. SYSDATE) is assigned BEFORE the transaction is committed. But your code that extracts the data is only pulling data for values that HAVE BEEN committed.
1. A transaction begins at 11:59 AM and performs an INSERT of one (or any number) of records. The value of SYSDATE used is 11:59 AM.
2. The transaction is COMMITTED at 12:03 AM.
3. Your job, which runs every five minutes pulls data for the period 11:55:00 AM to 11:59:59 AM. This job will NOT see the records inserted in step #1 because they had not been committed when your job query began execution - read consistency
4. Your job next pulls data for the period 12:00:00 AM to 12:04:59 AM. This job will also NOT see the records inserted in step #1 because the SYSDATE value used was 11:59 AM which is BEFORE this jobs time range.
You have one or ANY NUMBER of records that ARE NEVER PULLED!
That is why people don't (or shouldn't) use DATE/TIMESTAMP values for pulling data. If you only pull data once per day (e.g. after midnight to get 'yesterdays' data) then the only data you will miss is for data where the transaction began before midnight but the commit happened after midnight. Some environments have no, or very little, activity at that time of night and so may never have a 'missing data' problem.
Creating your tables with ROW DEPENDENCIES will store an SCN at the row level (at a cost of about 6 bytes per row) and you can use the commit SCN to pull data.
Just another caveat though - either of those approaches will still NEVER detect rows that have been deleted. So if you need those you need yet a different approach such as using a materialized view log that captures ALL changes.

Event date incorrect after import

I just imported about 30 minutes of recorded video from a miniDVD from my Sony Handycam Camcorder DVD-405.
Since there were two "events" in that one miniDVD, I imported all of it as a single event, and then took some of the clips and selected "split event before selected clip" and selected split.
I am not sure if it is related to the splitting or not, but the metadata on the newly created records are showing up as under Ocober 12.
I tried to undo split once or twice, but the data remains the same!

Bogrumpus wrote:
I have a DVD405 and a new 20" imac as well. Any problems importing w/ imovie 08? Any update on the time/date thing? did you ever import to a PC? Picture package sucked b/c it wouldn't import time and date at all, and I had to manually rename and categorize each movie. Also, I'm going to be importing all my other movies off my old hard drive and am curious whether or not they'll enter imovie w/ the original time and date. Any input/experience greatly appreciated.
Hello Bogrumpus,
No problems with import at all. iMovie 08 in fact is awesome because it lets you do it directly from the camera, which I was unable to do for whatever reason in iMovie 06. I simply finalize the disc, connect the USB connector to the computer with iMovie open and play the disc on the camcorder. iMovie recognizes it and opens up the various clips, allowing me to pick and choose which ones I would like to import and as simple as that, it imports the clips into iMovie.
As to my problem with time/date, there has been no updates unfortunately. But this one is bizarre how it happened. Maybe I will try importing it in a different mac and see if there is any difference. The camcorder shows the correct date/time and I have imported a lot of stuff from the camcorder and it has had no issues with the date/time. In my case, I simply split an existing event into two and coincidentally or not, the date of the second event is timestamped to be the same as the last date of the first event. Not sure if it is a bug or not, but that's the way it is.
As for importing from hard drive, I have not tried it or know if it is possible to do it. For all my old stuff, I simply popped the miniDVD into the camcorder and re-imported it to iMovie. Worked like a charm (well, except for one of the older miniDVD which was corrupted ).
From what I have read elsewhere on the discussion forums, you should be able to make DVD images of the old videos which can be mounted and be read as if a disc was inserted into the drive, and the end result would be what you are looking for - being able to import the videos directly into iMovie. I am not sure what happens to the date/time on those clips though
Glad to be of help!

Selection based on previous run date , time and current date a

HI all,
I have the selection as follows.
Previous run date : .12/14/2005..                     previous run time-14:30:56
current run date : 12/17/2009.                      current run time: 07:05:31
Here all are parameters. and current run date is system date and   current run time is system time.
i want to fetch all the deliveries from the above selection including previous run date and time.
Any inputs..

Hi
Append current run data and previous run data into a data range parameter,Current time and previous time into time range parameter and fetch the data based on the range parameters.
Regards
Srilaxmi

Time capsule not working properly after moving to a new house

Hello,
I have a macbook pro and a refurbished time capsule 2tb. I purchased both in 2013 and the time capsule at that time was used as both a wireless router for our house and my back up.I recently moved and didn't have access to the time capsule for over a month. Once I settled into the new house I plugged the power cable and internet connection into the time capsule and assumed that automatically it would keep working. It appears that it is backing up my system as I can pull up the application and see appropriate in-time documents however it consistently has a slow orange light blinking. I am not currently using it as a router as we have xfinity and have a different router for the house and when I try to use the time machine instead it cannot connect.
My internet connection is fine and I would like to leave it as is. It also appears the back up function is working for my mac. The question is, does the orange blinking light matter and or is it indicating that I am improperly using the machine? It it because the ethernet cable is attached and can the time capsule work without this?
I have tried resetting the capsule with the 10seconds hold on the reset button etc as seen on other posts but the orange light remains.
Thoughts?
Thank you for your time and assistance,
ahahn063

The question is, does the orange blinking light matter and or is it indicating that I am improperly using the machine?
The amber light is like the "Check Engine" light in your car. It blinks for a reason......the Time Capsule has a message for you.
That message might be that there is a firmware update available for the Time Capsule that needs to be installed....or....that AirPort Utility has detected that the Time Capsule is not configured correctly to work with the Xfinity router that you are now using.
To see the message.....open Finder > Applications > Utilities > AirPort Utility
Click on the amber dot
Then look for a Status setting, and click on the small amber dot there
A message will appear to tell you why the Time Capsule is whining, along with a suggested action to fix the issue.
If you are still having difficult, we for you to post back with the exact message that you see.

Time and Classifieds services missing after installing LabVIEW 8.0

Hi,
After installing LabVIEW 8.0 I noticed the Lookout Time and Classifieds services are missing. At first I thought it was just the Lookout lighthouse in the system tray which had disappeared but when checking in services.msc I can see that the services themselves are no longer there. The Citadel server is, however.
I am using Lookout Direct so please let me know if this question is more appropriate on the Automation Direct forums. I'm trying to change to a NI solution instead but every step is taking me considerable time.
Thanks,
Dave

Try to repair Lookout Direct from Windows Add/Remove Programs. The missing services should be reinstalled after repair.
Ryan Shi
National Instruments

Time and/or Date incorrect after moving/copying/importing

Similar Messages

Maybe you are looking for