Time Capsule Help: The backup disk image "XYZ.sparsebundle" could not be accessed (error -1).

My time capsule hasn't been working for months now. Finally got around to looking into the problem. Have tried looking on forums -- most solutions point to Pondini.org. I've tried #17, which is related to my specific error with no avail (including using Airport Utility 5.6 to disconnect all users).
I have also tried moving (instead of deleting) my old sparsebundle into a temporary folder on the Time Capsule to "hide it" to attempt to create a new sparsebundle: while I have managed to get Time Machine to create a new one (albeit after many, many attempts), once it creates a new one, it doesn't seem to say that anything has been backed-up AND it cannot seem to access the "new" sparsebundle, giving me the error: "The backup disk image “XYZ.sparsebundle” could not be accessed (error -1)."
Thoughts?

Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html

Similar Messages

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html

Time Machine - The backup disk image.. .could not be created (error 60)

Using an external 2 TB disk for Time Machine for iMac and MacBook Pro, both running 10.8.2. One month ago, upgraded MacBook from 10.5 to 10.8. Three weeks later, Macbook backups started failing. Ran TechTool on backup disk, found much corruption, reformatted it. iMac has always backed up to this disk just fine, but MacBook backups keep failing. LONG "Preparing to Backup" time, then suddenly "The disk you inserted was not readable by this computer - Initialize, Ignore or Retry" followed immediately by "The backup disk image "Volumes/Backup2TB-1/MacBookPro.sparsebundle" could not be created (error 60). When I check the TMP file on the backup disk, it's gotten to about 17.9 Mb before quitting.
What could be getting in the way?
Thanks.

Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar. Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind. Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item. Also delete all other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past. Quit Keychain Access and try to back up again.

I am getting this error when time machine tries to back up to a time capsule. "The backup disk image "/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX's MacBook Air.sparsebundle" is already in use." Same time capsule has worked in the past.

I am getting this error when time machine tries to back up to a time capsule. "The backup disk image “/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX’s MacBook Air.sparsebundle” is already in use." Same time capsule has worked in the past.

First, restart the computer and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

HT3275 How do I correct this problem: "Time Machine couldn't complete the backup to "Robert's Airport Time Capsule." The backup disk image "/Volumes/Data/Robert's iMac.sparsebundle" is already in use.

How do I correct the following problem?
"Time Machine couldn't complete the backup to "Robert's Airport Time Capsule".
The backup disk image "/Volumes/Data/Robert's iMac.sparsebundle" is already in use.

xor. wrote:
I switched off the TM for 10 seconds and my laptop still complains about the backup image ... is in use.
Some ideas?
There is some more details here.
C12 http://pondini.org/TM/Troubleshooting.html
Tell us more if you cannot get it working.

I have two Macs that won't back up to time capsule, says The backup disk image "/Volumes/Data/Douglas Chalmers's iMac.sparsebundle" is already in use.

I have two Macs that won't back up to time capsule, says The backup disk image “/Volumes/Data/Douglas Chalmers’s iMac.sparsebundle” is already in use.

Please look over to the right of this page for the heading of More Like This.
There are multiple answers and solutions there.

HT3728 My Time Machine tells me it cannot complete the backup to my Time Capsule because the backup disk image sparsebundle is already in use.

The 2GB hard drive on my iMac failed and has just been replaced under warranty.
When I got it back I restored my Time Capsule and started back ups of the iMac and the MacBook Pro.
Now 2 days later it is telling me that Time Machine couldnt complete the back up to my Time Capsule as the backup disc image sparsebundle is already in use. It is saying this for both machines which presumably means a problem within the Time Capsule.
What does this mean and what should I do about it?

See # C12 in Time Machine --- Troubleshooting
http://pondini.org/TM/Troubleshooting.html

Time Machine couldn't complete the backup to "Time Capsule. The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"

We are Mountain Lion using Time Machine to backup to Time Capsule. When the backup tries to run, an error appears after a couple of minutes saying "The disk you inserted was not readable by this computer." Then an error shows up saying "Time Machine couldn't complete the backup to "Time Capsule.The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"
I low level reformatted the Time Capsule and that didn't fix it. I then tried using Time Machine on another computer to back up to that same Time Capsule and it worked- so I'm doubting it's the Time Capsule.
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
However, after a couple of minutes- it comes back saying that the disk is unreadable.
I think it's something wrong with either creating the sparsebundle or opening the disk image that seems to be a part of the Time Machine backup process on the local drive.
I am able to create a disk image with Disk Utilitiy without any problem on that system. I've repaired the disk and disk permissions with Disk Utility and replaced the directory with Disk Warrior. I've trashed what preference files I could find and restarted. I've completely removed the backup destination from the computer and added it back again.
Help!
Thanks,
Neil

neillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here.

HT1338 Time Machine couldn't complete the backup to "Time Capsule 071181" The backup disk image "/Volumes/ my name" is already in use.

Time Machine couldn't complete.... Backup disk is already in use.

this is the second time happened, the same problem. when last time it happened, I rebacked up completely, which was take forever. now the same problem happend again. shows "/volumes/myname is in already in use"what should I do? is there anyone can help me? My computer is Mac air, OS X.

I have an error message:Time Machine couldn't complete the backup to Time Capsule. The backup disk image is already in use.

I'm a single user, no Airport, and the Time Machine has been backing up nicely for several months. Recently, I've been getting the above message. Any help is appreciated.

Restart the TC. If that doesn't work, do as follows.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Time Machine gives error "The backup disk image '/Volumes/time capsule name/Macbook Pro.sparsebundle' could not be accessed (error -1)."

The backup disk image ... could not be accessed (error -1).

Thanks to the great Pondini...
http://pondini.org/TM/C17.html

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

I get an error mess when trying to complete backup "The backup disk image "/Volumes Time Capsul MacBook Pro.sparsebundle" could not be accessed (error -1).

When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?

I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.

I keep getting the message "The backup disk image "/Volumes/Donald Baker's Time Capsul/Donald Baker's iMac.sparsebundle" could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

I keep getting the message "The backup disk image “/Volumes/Donald Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

Time Capsule and Time Machine master guru Pondini has all the answers.
Check # C17 in his excellent support document Time Machine -- Troubleshooting.
http://Pondini.org/TM/Troubleshooting.html

Error Message is The backup disk image "/Volumes/Time Capsule/Dave Kuhl's iMac.sparsebundle" could not be accessed (error -1).

I got the error message that my Time Capsule "iMac.sparsebundle could not be accessed (error - 1). It backed up fine yesterday. Anyone else have this problem?

If it helps I am getting the same message, I have reported it to Apple and they have someone working on it. Mine stopped backing up after having a new hard drive installed. I can however back up to the same time capsule from my laptop.

Time Capsule Help: The backup disk image "XYZ.sparsebundle" could not be accessed (error -1).

Similar Messages

Maybe you are looking for