Time Capsule with (2) AirPort Express connection problem

I have (1) Airport Time Capsule with (1) AirPort Express connected. I'm trying to connect another Airport Express but only get a yellow light on the 2nd Express. If I connect it with a ethernet cable I get a green light. How do I connect a 2nd Express?

The 2nd Express needs to be about the same distance from the Time Capsule as the 1st Express....and....it cannot be closer to the 2nd Express than it is to the Time Capsule.
The reason for this is that the Express will pick up the strongest signal and you want the Express to pick up the Time Capsule signal to be able to extend it.
Then, start over as LaPastenague instructs on the 2nd Express and configure it again.

Similar Messages

Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

Can I extend the range of my Time Capsule with an Airport Express?

I have read on Apple's description of the Airport Express that it is possible to extend the range of an existing network. I have the OLDER version of the Time Capsule (it is still wireless-N but it can only broadcast EITHER 2.4 or 5 gHZ at a given time) that does not have the simultaneous broadcasting. Can I still use the Airport Express to extend the range of my Time Capsule network?

i think you have the same concern as mine....
would the express extend the n or g networks? i am pretty sure it cant dual broadcast.....
my guess is that it would extend the n network by default, but if an iphone hooks up to the part of the network that the express is covering, it will probably slow down to a g speed.
i am one of those that suffer from my existing airport extreme and express slowing down when i turn on my ipod touch or iphone! the whole network slows down to the lowest common denominator.
by getting the new time capsule (or the new airport extreme), i will be fine in the part of the house that is being served by the new machines, but i am expecting the network to slow down where the express is in incharge!
this is all in preparation to buy a new TC...... is my understanding correct?

Force 802.11ac Connection To Time Capsule Rather Than Airport Express

I have a new Time Capsule and a new retina Macbook Pro, both with 802.11ac.
The Time Capsule is in my main room and my rMBP is in my offce. In between my office is the kitchen which has an Airport Express. The reason I have the Airport Express in the kitchen is because some devices such as iPads and iPhones have a hard time connecting to the Time Capsule, so the Airport Express extends the network.
The rMBP has no such problems. However, because the AE is closer, it stays connected to the AE rather than the TC. This of course means I don't get any 802.11ac advantages.
How can I force the rMBP to connect to the TC and ignore the AE?

LaPastenague had good advice for you. All that you need to do is use AirPort Utility to enable the option to assign a different name to the 5 GHz band on the Time Capsule.
Then, move your MBP close to the Time Capsule and "point" your MBP to that network. Then, check to insure that you have the MBP configured to connect to the 5 GHz network first in the connection priority list.
Open System Preferences (gear icon on the dock)
Open Network
Click on WiFi on the left
Click Advanced at the lower right
Make sure that the 5 GHz network name is at the top of the connection order list. If it's not, drag it there
Make sure that there is a check mark in the box next to "Remember networks this computer has joined"
No other boxes should be checked
Click OK
Click Apply
Close the windows
Note.....As you know, 5 GHz signals are much weaker than 2.4 GHz signals, so 5 GHz works best when wireless devices are in the same room, close proximity, or have line of sight with each other. If there are several walls or other obstructions in the signal path between the Time Capsule and MBP, the Mac may not connect at high speeds.

Time Capsule vs. Airport Express via Ethernet

Air;ort Express is connected to a DSL modem with an Ethernet cable. Time Machine is in turn connected directly to my MacBook Pro, again by Ethernet. Obviously something here is wrong, since the Time Machine persist in showing a blinking yellow light.
I think that this used to work but no longer. How did I sdrew up?

Does that in turn suggest that I should connect the Time Capsule directly to Airport Express?
when possible always run ethernet.. it is fast and reliable.. only when there is no other choice use wireless to link routers.. it is always poor.
You can use wireless from laptop to the Express or the TC.. that is fine.. but keep the wireless usage to something close and just once.. no double hop over wireless.
If you have ethernet there, use it.
Simply put the TC in bridge mode.. that is router bridge.
And make sure you are creating a wireless network on the TC.. same name and same security setting and password as the Express.. then the laptop can connect to whichever it is nearest to.
If you need complete diagrams or screenshots just ask.
life is a lot more complicated than it was when I bought my first 128K Mac in 1984.
Not always.. networking with modems and telephone wires was not always fun.. !!
You forget what it was like 30years ago.. !!
I started about that time but could never afford Macs. When I think of all the money I spent on computer gear over the years it is frightening.
Instructions here for roaming network since Apple has none up to date.
Setting Up Roaming - New AirPort Extremes and Utility

I have a "n" time capsule and "g" airport express

Hi, I'm trying to extend the range of my Airport Time Capsule (1st generation "n"). I have a "g" Airport Express and I've been trying to set it up as a remote base station (or do I mean "relay"?) to strengthen the signal in a distant room. It's not working! Is the problem that you can't use a "g" express with an "n" Time Capsule??? Do I need to buy an "n" Express, or is there something I'm doing wrong?

I'd suggest reading the Designing Airport Networks manual. There is a section on setting up a WDS with a Time Capsule and an Airport Express.

Time Capsule green and Airport Express blinking amber

I replaced my AEBX with a Time Capsule and now the AEX configured as an extender blinks amber continuously. Bringing up AirPort Utility and following the AU help instructions to find out why the blinking amber, shows that the AEX is operating normally. In fact, the little faux LED to the left of the AEX icon shows green while the real LED is blinking amber.
The AEX was solid green before installing the TC.
Anyone else seen this? Anyone know what's going on?

I cannot get Airport Utility to see both my Time Capsule and my Airport Express at the same time. When I disconnected from the Time Capsule network it saw the AEx but repeatedly said there was a problem configuring the device. So I am stuck.

What is the maximum distance between a time capsule and an airport express?

What is the maximum distance between a time capsule and an airport express?

You can only "extend" the signal one time, so you need to have the AirPort Express located approximately 1/2 to 2/3 of the distance from the Time Capsule to the area that needs more wireless coverage.
I doubt that this will help much since you have a very challenging setup. Wireless is really only for "same room" or "nearby rooms" around the corner.
To do this correctly you will need to use an Ethernet cable connection from the Time Capsule to the AirPort Express, which could then be located close to the xBox.
If it is not possible to run the Ethernet cable, you might look at a pair of Ethernet powerline adapters to send a "psuedo" Ethernet signal over the AC wiring in your home.
This will not be anywhere near the performance of a regular Ethernet cable, but it will likely be much better than wireless.
Since Ethernet over powerline (EOP) is somewhat unpredictable, you would want to have a very clear understanding of the store's return policy in case things don't work out as hoped. Any computer / electronics superstore will have a selection of powerline adapters to choose from.

How can I set up a wi-fi network, using one time capsule and two airport express

how can I set up a wi-fi network, using one time capsule and two airport express ?
The time capsule is near the Mac. ok
The first Airport is on the corridor, ok, works well and the App on the iPad signals so, ok
But when I plug the next Airport on another room nearby nothing happens, and signals disconected ....
is the signal so weak that is not able to go to ono room to the other ?

Well, even if you have the first express set up to extend the network, the second express can only extend from the TimeCapsule.
Maybe you got walls of sheetrook in the way, or kitchen/bathroom tiles, etc, dampening the signal rapidly.

Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

Extending Network With Skh HD, Time Capsule 1TB and Airport Express

Hi,
I'm struggling to achieve what I thought to be an easy setup process.
*What I want to achieve?:*
* Ground Floor - Sky HD Router with Sky Wireless Network & Time Capsule 1 TB(choice to connect Time Capsule by either WAN Ethernet or over wi-fi?)
* First Floor - IMac and MacMini connected wirelessly, along with Airport Express to extend wireless network
* Loft - Apple TV connected to Cinema setup, with need to be able to connect to Sky HD Wireless network
Note/Problenms: It doesn't appear to be possible to extend the Sky HD Wireless Network via Time Capsule using the wireless option? Error reads "not able to extend wireless network etc...". Secondly, as a result the WiFi signal in the Loft for the Apple TV HD is 50% approx. The download speeds for movies etc is also sufficiently slow that repeat buffering is required. Not ideal.
*Current Setup:*
* Ground Floor - TC connected to Sky HD Router via WAN Ethernet cable. Creating New Network, named exactly the same as the original Sky HD Wireless Network e.g. "SKY08323"
* First Floor - IMac and MacMini connected wirelessly to SKY08323 network. Airport Express connected wirelessly to same network.
*Possible Enhancement?*
I've tried a couple of times to extend the range of the Wireless network. I First tried to do this as explained by extending the Sky HD Router network wirelessly (not possible it seems). I then connected via Wan Ethernet and setup TC and AirPort Express to interact over a WDS. TC = Main Base Station and AirPort Express = Relay Station. This seemed to setup ok but once both were restarted both TC and AE were flashing Amber and AE was no longer visible in Airport Utility.
If someone would be kind enough just to outline a step by step approach for setting up my Sky Network and being able to extend it via TC and AE, then I would be really grateful.
Many thanks and Happy New Year!
Eugene

If someone would be kind enough just to outline a step by step approach for setting up my Sky Network and being able to extend it via TC and AE, then I would be really grateful.
As you have surmised, you will NOT be able to extend the wireless range of your Sky HD Router with the Time Capsule (TC) ... at least not wirelessly.
You basically have two options: 1) Run Ethernet between the ground floor and the loft, or 2) Consider deploying Powerline adapters. These adapters take advantage of your home's electrical circuit to create a pseudo Ethernet one.
In either case, the two routers would be interconnected by Ethernet and the TC could be place in the loft. You would then reconfigure the TC as a bridge to allow the Sky router to continue to provide both the NAT & DHCP services for all network clients regardless of which router they are connected to. In addition, you would configure the TC to use the same Network Name & wireless security type so that, for example, you could roam with a wireless laptop between floors and still be on the "same" network.

ITunes 9.2.1 Update & Airport Express Connection Problem

Hey, I bought an Airport Express recently, set it up on my current wi-fi network to stream audio.. worked perfectly and we had no problems. When iTunes 9.2.1 came out, I updated straight away and since then I've been having problems with the Airport Express. Now - if I want to use it to stream music, I have to go and unplug it and then plug it back in, wait for it to start up and then it will work. If I start streaming music pretty much straight away then I'll have about 45mins of playback before it will just stop. If I try to reconnect to the airport speakers then, it wont connect and comes up with a nasty looking error message in iTunes with loads of foreign looking symbols. I have to go unplug and then plug in again and wait for it to start up again before it will work again. If I don't start playing music soon after this 'reset', it loses its connection very quickly and I have to go plug out and in again to get it connected.
The green light is always showing, I've tried restoring to its default settings and then setting it up again, I've got the latest iTunes and Airport Express software.. but no idea how to stop this happening. Can anyone help as its getting very frustrating!
Thanks!

Same issue here. I just received a new Express N to replace my Express G (2004) since it was experiencing some minor stutter playing music (due to contention with the 10+ other clients on a 2.4Ghz wireless G network).
I have a dual-band Linksys 610n (latest firmware) with a 5ghz/40mhz N only network and a 2.4ghz/20mhz G only network. With the Express N configured to connect to the 5ghz N network as a client, I have to reset it every time I want to play music or I get the garbled error dialog in iTunes 9.2.1. In addition, after resetting, it only plays music for about 20 minutes and then starts to stutter and a minute later drops out completely and has to be reset once more.
I'm streaming from a 2009 MBPro/10.6.4 with 8GB Ram and it too is a client on the same N network. The MBPro is about 5 feet from the router and the Express N is less than 30 ft away through a few walls of drywall and wood studs. The Express G in the same configuration only experienced minor stutter during playback and never dropped from the network completely. I wanted to get the N express to remove contention by using the 5ghz network, obviously that's not going to work. I realize 5ghz has a shortened range (especially through objects), but 30 ft should be well within 5ghz reach and I have no problems with my other 5ghz devices (2 other MBPros).
The Express N has firmware 7.4.2 and the Express G has the latest firmware for it (6.x.x).
I'm going to try the Express N on the G network, but even if it works, I will probably just return the Express N and live with the Express G's minor stutters since there's no benefit to the N at that point.

Set up Airport Extreme with 2 Airport Express connected by CAT5??

I recently bought an Airport Extreme base station and an Airport Express. My plan was to use to Airtunes with my AV receiver in my basement. Unfortunately, because the distance between these two areas is long (and separated by two floors) I'm not able to get a strong enough signal with the Airport Express to use Airtunes. I bought another Airport Express to put on the middle floor of our house but the signal in the basement was still not strong enough even with this addition.
I do have a way of connecting the middle floor of our house with the basement area by a CAT5 ethernet cable. My plan now is to connect the two Airport Express modules by their ethernet ports with this cable. The Airport Express on the middle floor connects with the Airport Extreme base station wirelessly without any problems. My question is what is the proper setup for the 2nd Airport Express connected by ethernet in my basement.
Airport Tech support said this could be done. They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station. This setup actually works for several hours but then the Airport Express module that is connected to the Airport Extreme blinks amber. Interestingly the 2nd Airport Express with usually remain with the green light on.
Does anyone have any suggestions for the best way to set this up regarding network configuration with the Airport Utility?
Thanks

wmskaggs, Welcome to the discussion area!
They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station.
That will work with as long as the AirPort Express (AX) is connected via Ethernet. The only other setting you need to make is to configure it to act as a bridge (not sharing a single IP address).
If this one looses connection, then something is wrong with the AX or the Ethernet connection (cable and/or connectors).

Poor network speed with 1st generation time capsule and multiple airport express 5Ghz. My network speed slows to a crawl when not close to the time capsule. I get the range that I need, but the speed is painfully slow.

Hello,
I have a first generation time capsule running 802.11n (b/g compatable) and the airport expresse's are the newer 5ghz models. I have 3 airport express's and I have the range that I need. I can run the time capsule using 802.11n 5ghz, but I loose the range and can't connect to all of the airport express's. My computers and mobile devices run 802.11n. Does anyone have any suggestions on how to increase the network speed. Would the new airport extreme fix the problem?
Thank you

Unfortunately, you are experiencing one of the downsides to 5 GHz. That's because the higher frequency 5 GHz signals are much weaker than 2.4 GHz signals.
After all, you always have to give up something to gain something else. In the case of 5 GHz, you gain potential speed but in return, you must give up penetration power and distance capability.
In order to work well, 5 GHz signals need to almost have a line-of-sight relationship between devices. Unless you can achieve this, you will do much better to leave the Time Capsule running at the 802.11n (b/g compatible) 2.4 GHz Radio Mode and allow the Express devices to "extend" that network.
As for the location of the AirPort Express devices in an exended network, that is critical for best performance. That's because the Express can only "extend" the quality and bandwidth of the signal that it receives. Post back if you need a few more tips on how to find the best location for the AirPort Express devices.
Would the new airport extreme fix the problem?
Unfortunately, no.

Connection printer to time capsule with wifi ... Problem

Sorry i am french... so my english is verry bad
I have buy yesterday a new printer with wifi connection, my problem is the wifi software into the printer dont find the time capsule...
Can you find a solution?

The new 7.6.3 firmware and 6.2 utility is supposed to provide WPS which is probably what the printer is requesting to do connection.. but you can use WPS without the new firmware. WPS is available.. just tricky to get at.
http://support.apple.com/kb/HT3500
The manual setup method suggested in the above article is the best.. just plug the printer into the computer by usb and use the setup disk that came with the printer.. I have done a few of these and it works fine.
I do recommend before you start.. setup TC with SMB type names.. ie short, no spaces and pure alphanumeric.

Time Capsule with (2) AirPort Express connection problem

Similar Messages

Maybe you are looking for