Time conversion from u0085.Any help on this error in the PSA?

Hi,
In IDES, I chose a random infosource to test init and delta loads; in the process I created an infopackage for the load. During the load, Monitor displayed showed failure (Red); The details of the message in PSA is:
Time conversion from 0Calday to 0FISCPER (discal year) failed with value 19911021
Any guide on how to fix this problem?
Thanks

hi Amanda,
0fiscper has compound infoobject 0fiscvarnt (you can check RSD1 tab 'compound').
when uploading data, conversion will failed if 0fiscvarnt is blank/initial or the date format/value is incorret, your date from 0calday seems correct so 0fiscvarnt blank
seems it's your case, try to check in your transfer rules and mapped 0fiscvarnt infoobject, you can fill it with constant value, choose option 'constant' and fill with K4, you can only fill with values that exist in table T009T.
you can transfer these values from r/3 via rsa1->source system->transfer global settings, mark 'fiscal year' something and option 'update table' and execute.
hope this helps.

Similar Messages

Can anyone help with this error msg "The disc can't be burned because an unexpected error occurred (error code 0x8002006E)." ?

I was also getting the message telling me it is a medium problem however that has changed more to the latest 0x8002006E one.
I use to be able to record all the time on DVD-R, then all of a sudden that has stopped and get
The dic can't be burned because of a unexpected error 0x8002006E.
I have looked at most of the discussions on this subject, I have also done most of what people have suggested, nothing has worked so far.
I am able to record music on cd's, I am able to record on DVD-RW, I can't however record on DVD -R anymore and have tried three different brands.
I have gone through about 30 or more discs trying to fix this problem so any help right now would be great.

http://www.apple.com/support/mac/app-store/contact.html?form=account

Can anyone help with this error message (The operation couldn't be completed. (NSURLErrorDomain error -(1012.) (-1012)

The most recent update I have in the App Store is an OSX update but I receive this error message when I select the update button. (The operation couldn’t be completed. NSURLErrorDomain error -1012. -1012. Can anyone tell me why or how to delete this update in the que from the app center and try again? Any help would be greatly appreciated. Thanks.

http://www.apple.com/support/mac/app-store/contact.html?form=account

Have quick time on windows 7 and can not rotate or flip the video sent to me from friends any help on this thanks.

Have a windos usung Quick Time and friends sending videos to me that are sideways and upside down. Any way to flip while watching from Quick Time.
Some are from a MAC computer and can not turn them to watch them the right way. How do i do this thanks.

I have purchased Quicktime Pro and when I use the rotate button under Show Video Properties-Visual Settings, the viewing screen rotates from portrait to landscape but the video itself does not rotate. Any suggestions as I have a lot of unusable video which I want to pull into my video editor.
BTW, my Studio 15 which is a fairly high-end software has successfully rotated previous videos shot with my wifes I-Phone 4 but on these video clips, the rotation works but then does not play. I wonder if it was some setting or problem with my wife's Iphone?

I need help every time my iTunes library updates i get this error messege: The iTunes.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. but the file should be there.

Every time I have to upgrade iTunes it gives me this messege:'The default location for this file is in the "iTunes" folder in the "Music" folder.' the file should be there but I don't understand why it does this every time Apple upgrades the Itunes library. Its on the computer somewhere but it only affects this login on my computer (meaning on this Windows Account). Why does my iTunes do this? Then I have to spend hours placing all my libraries back together and all my music back into the library. Which usually takes me a few days to sort all out. What is wrong with my iTunes? The iTunes folder is a folder in my Music folder where I store the iTunes music/files/libraries at on my computer so I can have all of the iTunes files in one place on my computer.

I have a Windows 7 operating system my computer runs from.

My Macbook keeps crashing! Any help on this error report.

Here is the error report, how do you read these things?
Anonymous UUID:       A95A6D4A-4E77-4F1D-62F8-C7C75707D7D6
Wed Mar 5 10:25:01 2014
panic(cpu 6 caller 0xffffff802a8dbe2e): Kernel trap at 0xffffff802a8dd6d7, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000011177c000, CR3: 0x000000002d2f6000, CR4: 0x00000000001606e0
RAX: 0x48005f760e058b48, RBX: 0xffffff81147ef000, RCX: 0xffffff81147f96e8, RDX: 0x0000000000000002
RSP: 0xffffff816b723f40, RBP: 0xffffff816b723f50, RSI: 0xffffff802ae25130, RDI: 0xffffffffffffffff
R8: 0x00000000e0000000, R9: 0x7ffffffffffffffe, R10: 0x00000000ffffffff, R11: 0x0000000000000200
R12: 0xffffff811475e950, R13: 0xffffff80417ab140, R14: 0x00002fafaba56bdb, R15: 0xffffff811475e960
RFL: 0x0000000000010006, RIP: 0xffffff802a8dd6d7, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000011177c000, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff8114755df0 : 0xffffff802a822fa9
0xffffff8114755e70 : 0xffffff802a8dbe2e
0xffffff8114756040 : 0xffffff802a8f3326
0xffffff8114756060 : 0xffffff802a8dd6d7
0xffffff816b723f50 : 0xffffff802a8375ba
0xffffff816b723f90 : 0xffffff802a837908
0xffffff816b723fb0 : 0xffffff802a8d6ff7
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:     0x000000002a600000
Kernel text base: 0xffffff802a800000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 52431545656019
last loaded kext at 51351236380292: com.apple.iokit.IOBluetoothUSBDFU          4.2.3f10 (addr 0xffffff7facca0000, size 12288)
last unloaded kext at 51474082436223: com.apple.driver.AppleIntelMCEReporter          104 (addr 0xffffff7facc92000, size 32768)
loaded kexts:
com.apple.filesystems.smbfs          2.0.1
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AGPM          100.14.15
com.apple.driver.ApplePlatformEnabler          2.0.9d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleMikeyDriver          2.6.0f1
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleHDA          2.6.0f1
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.GeForce          8.2.4
com.apple.driver.AppleIntelHD4000Graphics          8.2.4
com.apple.driver.AppleMuxControl          3.4.35
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleIntelFramebufferCapri          8.2.4
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleThunderboltIP          1.1.2
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.driver.AppleUSBHub          666.4.0
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AppleSDXC          1.5.2
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.driver.AppleUSBEHCI          660.4.0
com.apple.driver.AppleUSBXHCI          670.4.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.kext.triggers          1.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.iokit.IOBluetoothFamily          4.2.3f10
com.apple.driver.DspFuncLib          2.6.0f1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.5fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOAcceleratorFamily          98.14
com.apple.nvidia.driver.NVDAGK100Hal          8.2.4
com.apple.nvidia.driver.NVDAResman          8.2.4
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.iokit.IOSurface          91
com.apple.driver.AppleGraphicsControl          3.4.35
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleHDAController          2.6.0f1
com.apple.iokit.IOHDAFamily          2.6.0f1
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.IOPlatformPluginFamily          5.7.0d10
com.apple.driver.AppleSMC          3.1.8
com.apple.iokit.IOAcceleratorFamily2          98.14
com.apple.AppleGraphicsDeviceControl          3.4.35
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
com.apple.driver.AppleUSBMultitouch          240.9
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.driver.AppleThunderboltNHI          2.0.1
com.apple.iokit.IOThunderboltFamily          3.2.7
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.iokit.IO80211Family          630.35
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.iokit.IOUSBFamily          675.4.0
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.pthread          1
com.apple.kec.corecrypto          1.0
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM256E, 251 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4

That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A stale or corrupt kernel cache
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault (including incompatible memory)
An obscure bug in OS X
You may already have ruled out some of these.
Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation may solve a problem that isn't solved by reinstalling in place.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
Apple Diagnostics or the Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test, if applicable.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Connecting more than one display is another reported trigger for OS X bugs.
If your system is not fully up to date, running Software Update might get you a bug fix.
In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
Otherwise, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.

I have problem with my I PHONE 4S Always its time out then i must restart my I phone please any help about this case ??

i have problem with my I PHONE 4S Always its time out then i must restart my I phone please any help about this case ??

Hello Pllumb,
It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Time Conversion from Local to UTC Help! - Daylight Savings Problem?

Hi,
I am trying to use the generic conversion of local time to UTC time. I thought I had everything working since I use the "Get Date/Time in Seconds" and then convert to "Seconds to Date/Time" witht the "to UTC" flag set true. Then I convert back to a timestamp.
I thought I had everything working until I hit Daylight Savings for the Pacific Standard Time. Now the Labview is off by 1 hour!
Is there an update to the Subvi's that do this? Is this a known error? Please help. Thank you!
Attachments:
test25_LocalToUTC_Time.vi ‏8 KB

Here is the path you are doing that is causing the logic to fall apart for you.
1. You are getting the current time. In your images, it is 12:41 pm PDT which is 7:41 pm GMT
2. You are asking for the date/time record (that cluster that breaks out everything) but are saying it is UTC, so you get a date/time record that 19:41 UTC (7:41 pm). And the DST flag is 0. (Because UTC doesn't observe daylight savings time.)
3. Now you are taking that date/time record and converting back to an actual date/time. You don't wire up the UTC flag so it defaults to false. Thus the date/time record is interpreted as local. That DST flag is still 0 in your cluster. So you are actually converting the time to 7:41 pm PST, which is actually 8:41 PDT. (+1 hour for spring forward based on the month/date info.)
4. You are displaying that time stamp in the indicator labelled "Current Date/Time (UTC)", but it is not truly UTC, it is actually the conversion of a local time from PST to PDT, and it is not even the current local time. It is actually a "local" time 8 hours into the future. If you put the carat into that indicator's display format, you'll see that the UTC time is in the future as well. You call it UTC, but you are displaying a future local time.
The inconsistent conversions from local to UTC, and not accounting for the change of the DST flag from daylight time to UTC are what is confusing you. You kind of get lucky during standard time because the DST flag is 0 for both local standard time and UTC. But the conversions are still wrong, but it is a case of two wrongs are making it look right. Even in standard time your input timestamp and your output timestamp indicator don't match which you would see if you used an Equals? function on them.

My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

I have a macbook pro from 2007 and the display memory slows do the screen so much it is almost unuseable Any help fixing this problem?

I have a macbook pro from 2007 and the display memory slows do the screen so much it is almost unuseable Any help fixing this problem?

Hi,
Have you tried
1.leaving the screen flipped open,
2.connecting power
3. connecting external monitor; waiting for it to 'wake up';
then 4. closing lid of MBP to activate clamshell mode?

Date/time conversion from UTC to CET

Hello,
Jjust a little question to our SAP BI community!
Is there a BI function/ggod way that converts a (datetime) string DDMMYYYYHH:MM:SS in UTC time zone into a string DDMMYYYYHH:MM:SS in CET timezone ?
We receive this string in input in a flat file and need it to convert from UTC to CET.
Or do you know any way to convert a date/time from IUTC to CET, eveen using an ABAP function?
Thanks a lot,
Matthieu

Hi,
Check this thread for time conversion from UTC to Local time
[ABAP statement for converting UTC date/ time to local date/time],
Regards,
Daya Sagar

Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year A1 ) failed

Get red error when loading Delta data and the red error is:
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year A1 ) failed with value 20060426
We went to RSA1 -> Source Systems page, right click on the source system, choose Transfer Global Settings, check "Fiscal year variants" and check "Rebuild tables" and then run it twice, but still not helpful that we always get the above red error!
Any idea?
Thanks

hi Anurag,
You are right that run OB29 on BW, find there is no any period entry for variant A1. Since all the variant should come from R3 by run "Global Transfer Settings" on the source system, I run OB29 on R3 and find the same thing that there is no any period entry for fiscal year variant A1. I will go ahead to ask R3 people to correct it on R3, then conduct the "Global Transfer Settings".
Thanks

HT203128 "Unable to check for available downloads. The network connection was lost." I have 3 downloads from yesterday that I receive this error code. Any ideas?

I have 3 downloads from yesterday that I receive this error code. Any ideas?
Thank you!

I may have stumbled upon something that could help. A type of "detour" around the problem.
I just started experiencing this problem a few days ago. Anytime I'd try to download a song/video/movie, I would get the message, "Unable to check for available downloads. The network connection was reset".
So, instead of selecting "Check for Available Downloads" under "Advanced" menu...
I logged into "My Account" page in itunes. If there are available downloads it comes up at the top of the page with the option button "Download Now". When I select that -- it downloads immediately.
Can't promise it will work every time. But it's worked for me so far. Good luck...

HOW DO YOU GET ANY HELP AROUND THIS PLACE

firefox open's the last page that I opened & will not open my home page without being forced. I have asked this question many times but have never gotten an answer. Even Mozilla can't fix this problem that they created

'''''"HOW DO YOU GET ANY HELP AROUND THIS PLACE"'''''
# You ask in a courteous and respectful manner.
# We are all uncompensated volunteers; users trying to help other users.
# Do not be disrespectful if you expect assistance.
# Firefox developers do not monitor this forum.
# Do NOT type in all caps; that is considered yelling.
# Understand?
Check your home page settings. Be sure you have '''<u>not</u>''' selected Tools > Options > General > When Firefox starts, "Show my windows and tabs from last time". See: <br />
*https://support.mozilla.com/en-US/kb/Options+window+-+General+panel
*http://support.mozilla.com/en-US/kb/Preferences+are+not+saved
You need to update Java.
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* After the installation, start Firefox and check your version again.

Time conversion from u0085.Any help on this error in the PSA?

Similar Messages

Maybe you are looking for