Time Dependent Hierarchies in Bex
Hello All,
I have a time dependent hierarchy with the same leaf in two different nodes i.e,
Mr. Jones was a part of cost center A from 1/1/2001 to 12/31/2003 and he is a part of cost center B from 1/1/2004 to 12/31/2006.
When I want to run the report for time period 1/1/2001 to 12/31/2006, will the report show Mr. Jones as part of cost center A from 1/1/2001 to 12/31/2003 and as a part of cost center B from 1/1/2004 to 12/31/2006.
Or do I have to model this as a time dependent navigational attribute. If I do this, can I still display it as a hierarchy.
Please pour in your inputs.
Thanks.
In the infoObject i chose time-dependent hierarchy structure. I've built a new hierarchy, with the same leave in two different nodes. Each leave got different time interval but when i run a report on a period which include the time interval of the two leaves i get only one node...
Please advice.
Hello All,
I have a time dependent hierarchy with the same leaf in two different nodes i.e,
Mr. Jones was a part of cost center A from 1/1/2001 to 12/31/2003 and he is a part of cost center B from 1/1/2004 to 12/31/2006.
When I want to run the report for time period 1/1/2001 to 12/31/2006, will the report show Mr. Jones as part of cost center A from 1/1/2001 to 12/31/2003 and as a part of cost center B from 1/1/2004 to 12/31/2006.
Or do I have to model this as a time dependent navigational attribute. If I do this, can I still display it as a hierarchy.
Please pour in your inputs.
Thanks.
Similar Messages
-
Time Dependent Hierarchies in Bex Queries.
We are using Time depenedent Hierarchy structures.
year and period will be entered by the user in the query
Is there any simple solution where in based on the User entered year and period, corresponding hierarchy should be used in the query execution.Hi Shashi,
One of the ways:
Create a variable type customer exit - in properties of the IO - in the 'select hierarchy' window there is a 'Variables' checkbox for key date.
Calculate the last date of the entered period/year in the exit.
Best regards,
Eugene -
Regarding performance issue in time dependent hierarchie.
hai
we are loading time dependent hierarchies from flatfile to bw,it is weekely load,we have nearly one million records loaded,we got an issues regarding change of these hierarchies timely.when ever there occurs a change in hierarchy a new row is added to the table,it is degrading the performance,can any one of you please suggest how to over come performance related issues regarding time dependent hierarchies.
Regards
Srinivas.Ghello deven,
if you are only focusing on your application's performance
on the aspect of usability i.e. less waiting time, fast
response UI, i would personally suggest you to use AJAX.
put some processing part on the browser side and making
data retrieval from MI asynchronous... this way, your user
don't have to wait for all data to be presented, but rather
could work on the data presented in pieces (i.e. asynchronously).
anyway try googling for AJAX...
regards
jo -
Is BPCNW 7.5 supports Time dependent Hierarchies ?
Hi,
We are maintaing 4 hierarchies for Profit center dimension. Depends on business structure nodes(profitcenters) will move from one parent to another.
For e.g:
In 2009 my PC hierarchy looked like
RBU1
-- PC1
-- PC2
RBU2
-- PC3
-- PC4
And in 2010, PC2 moved under RBU2, and the hierarchy looked like
RBU1
-- PC1
RBU2
-- PC2
-- PC3
-- PC4
So, now the requirement is if they want to look at 2009 numbers they would want to see the hierarchy roll up of 2009 and if they look at 2010 numbers, they would like to look at the new hierarchy.
Is this requirement possible in BPC NW7.5 with out maintaining new hier for 2010.
thanks in advance...
regards,
RajuHi,
As such time dependent hierarchies are not supported by SAP BPC 7.5.
This will be deffinately covered in SAP BPC 8.0 release. BPC 8.0 is the major release of SAP BPC NW version.
Regads,
Mahesh -
Changing to time-dependent hierarchie of 0CUSTOMER
Dear Experts,
I like to change 0CUSTOMER to "entire hierarchie is time-dependent" <b>without losing any existing hierarchy or data</b>. Is that somehow possible? I tried changing the Radio Button, but could not activate the InfoObject;
<i>"The Hierarchy Table /BI0/HCUSTOMER must be converted incompatibly with an activation of characteristic 0CUSTOMER (changes to the key in the table). Table /BI0/HCUSTOMER contains data. Parts of this data were lost in the conversion."</i>
I already checked the whole forum and the SAP help, but could not find a suitable note.
Can someone plase help?
Thank you very much in advance
MartinaHello Amit,
Try reading the help documentation for such queries. e.g. Publishing Time-Dependent XML Documents - Knowledge Management - SAP Library
Regards,
Lorcan. -
Time Dependant Hierarchy in BEx
Hi All,
I have created a query on top of 0PS_C04.
In my master 0Project i have a hierarchy which is being displayed through BEx.
Now with every new fiscal year, new projects are added to the hierarchy.
When I run the query then all the projects of the hierarchy are displayed irrespective of the year they belong to.
My problem is that I want to display only 2009 related projects when i execute the report for 2009 and so on for the years that follow.
Can somebody please suggest a way out???
Thanks.
Regards,
RohitHi,
Are you using option : Time dependent hierarchy or Entire hierarchy is time dependent. If it's the latter, then you can just restrict your query with the hierarchy having end date 31.12.9999. Using key date option is also convenient.
--Akashdeep -
Displaying Time-Dependent Text in BEx
I have a report which displays texts of the OrgUnit. The infoobject OrgUnit has time-dependent text.
I would like to display on the Bex report text information valid at the time in history.
Example:
OrgUnit Begda Endda Text
111 1/1/2003 6/30/2003 ABC
111 7/1/2003 12/31/9999 XYZ
When I run the report in history say before 6/30/2003, I would like to see 'ABC' text.
Please advise.
-SonnyJust go into 0ORGUNIT and choose the option: Texts are time-dependent. You cannot have texts as a navigational attribute.
However, if you wanted to make them navigational, you would need to create a new attribute and insert the uppercase text values into it. Make this attribute navigational in both 0orgunit and your cube/ods.
However, it is much easier to just make your texts time-dependent.
Brian -
Determine key date at runtime for time-dependant hierarchies
Hello all,
I have to develop a query based on time-dependant and version-dependant hierarchy.
I have selection variables for -
Fiscal year
posting period
version
and hierarchy .
I want to achieve this -
First I want to enter Fiscal Period and posting period and version as user input.
Once this input is done I want to determine the key date based on fiscal year and posting period.
Once the key date is determined i want the hierarchy variable dropdown to show only correct hierarchy in that time for selection.
Is it possible? Please suggest the ways.
Many thanks and best regards,
SurekhaI have written following code for determining key date based on fisc year and posting period.
It may be useful for someone
WHEN 'key date variable'.
REFRESH e_t_range.
CLEAR l_s_range.
IF i_step = 2.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'fisc year variable'.
l_date(4) = loc_var_range-low.
CLEAR loc_var_range.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'posting period variable'.
IF loc_var_range-low >= 12.
l_date+4(4) = '1201'.
ELSE.
l_date+6(2) ='01'.
l_date4(2) = loc_var_range-low1(2).
ENDIF.
*get the last day of the posting period month
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
EXPORTING
day_in = l_date
IMPORTING
last_day_of_month = l_date
EXCEPTIONS
day_in_not_valid = 1
OTHERS = 2.
l_s_range-low = l_date.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF. -
Time-Depended hierarchy and BEx-Queries
Hi Gurus, Masters,
I have ONE time-depended hierarchy for 4 periods (times):
1, 2, 3, 4
I have 4 columns in Query with 4 periods:
1 col for 1 period,
2 col for 2 period,
3 col for 3 period,
4 col for 4 period.
I have 1 row with this hierarchy.
How can i share this hierarchy in my columns by validity:
for 1 col -> this hierarchy for 1 period,
for 2 col -> this hierarchy for 2 period,
for 3 col -> this hierarchy for 3 period,
for 4 col -> this hierarchy for 4 period?
Any answer will be very appreciated.
Thank you.
Is this possible?
P.S.
I have 2 solutions found.
Message was edited by: AndyMLHi Shashi,
One of the ways:
Create a variable type customer exit - in properties of the IO - in the 'select hierarchy' window there is a 'Variables' checkbox for key date.
Calculate the last date of the entered period/year in the exit.
Best regards,
Eugene -
Double leafs in non-time dependant hierarchies
Hi I'd like to ask you if someone's dealt with double leafs in a non-time dependant hierarchy; this would be something like this:
|_Char.A_|_Chr.B_|_Chr.C
|_SERV_|_JEFE1_|_COMER1_|_100 EUR
|_SERV_|_JEFE2_|_COMER1_|_ 50 EUR
PROD
JEFE1
COMER1
_400 EUR
<b>SERV..................150 EUR</b>
____ JEFE1____ COMER1 100 EUR
____ JEFE2____ COMER1 50 EUR
PROD..................400 EUR
|____ JEFE1____ COMER1 400 EUR
As you can see the leaf COMER1 is repeated 3 times at the same moment; imagine a comercial that has a single boss and that boss belongs to diferent bussines lines; or another case, with a comercial that has 2 diferent bosses and each of these bosses belongs to a diferent bussines lines.
I'v tryed by making a hierarchy with external characteristics with the Ch.1 and Ch.2 but I can't repeat the Ch.2 JEFE1 cause a error message is thrown. Anyway It seems that external characteristics does not act like a filter in anyway as I've read in some posts of this forum.
¿Is there anyway where I can make a hierarchy with this structure of duplicated nodes and leafs?Hi,
Maybe you can use compounding on the InfoObject C, compounding it with InfoObject A and B.
That way your salesman will be unique under each boss and business line.
Hope it helps,
David. -
Time dependant hierarchical display
Hello Everyone!
I'm reporting from a Cube with Organizational Unit (0ORGUNIT). I want to to display it in hiearchical view (ORGEH). My question is this: Since this is a time-dependant hierarchy, what date does the system use to determine the correct node/time interval? The system date, or some other key date? If so, where is this key date defined?
Best Regards,
Luís Andrade.Dear Luis,
In query designer, goto, query properties tab. Here, you will have the option to give query Key date. Here you can give a fixed date value or and SAP delivered date variable or a customer exit variable or a user entry variable.
Hope this helps you.
Best Regards,
Nithin Reddy. -
Time-dependent BW hierarchies in Analysis for OLAP
Hi all,
We are using time-dependent hierarchies in combination with a key date variable.
Tools used: Query designer based on SAP BW 7.4 and BO 4.0.
The following steps are executed:
Report is executed and key date is prompted
According to the key date, the correct time-dependent organisation hierarchy will be used in drill-down
Bring up variable screen again and select different key date
The drill-down changes according to the now correct time-dependent organisation hierarchy
The above scenario works for BEx Analyzer, BEx Web, Analysis for Office - but not for Analysis for OLAP.
Whenever I run through this scenario and confirm the updated key date, the following error is displayed:
cube.get.dimension.info.runtime.error : java.lang.IllegalStateException: There is no default hierarchy for dimension [ORG].
In the user guide I don't find any specifics about the hierarchies and since it works in all the other applications, I wonder where the error is coming from. I also could not find it anywhere else in the forum.
Has anyone experienced the same error or any suggestions?Hi Peter,
This issue is captured in SAP Note 1941865. Resolved in 4.0 (8.5, 9.2 or SP10) and 4.1 (1.6 or SP03).
Symptom
In BI 4.1, Analysis for OLAP returns errors similar to:"An error occurred in the MDAS service while processing a request from Analysis, edition for OLAP. Try the operation again. If the problem persists, please contact your administrator. (AOC00041)" and/or "cube.get.dimension.info.runtime.error: java.lang.IllegalStateException: There is no default hierarchy for dimension [DIMENSIONNAME]"
The BW Query the AOLAP workspace is created against has 2 different hierarchies that have the same text description
Environment
SAP BusinessObjects Business Intelligence platform 4.0
SAP BusinessObjects Business Intelligence platform 4.1
Analysis, edition for OLAP
Reproducing the Issue
In CMC, create an OLAP BICS connection to a multi provider
Connect to BI launchpad and launch Analysis, edition for OLAP.
Use the connection to create a new workspace.
The error is observed
Cause
This issue has been logged as a defect under ADAPT01720287 for BI4.0 and ADAPT01713663 for BI4.1
Resolution
A fix for this issue is included in the following maintenance releases:
BI4.0:
Patch 8.5
Patch 9.2
Support Pack 10
BI4.1:
Patch 1.6
Support Pack 03 -
Hierarchies for time dependent
hi,
i want the use of time dependent hierarchies.. and what is the difference between TIME DEPENDENT HIERRACHIE STRUCTURE... AND.... ENTIRE HIERARCHIES IS TIME DEPENDENT
I done with HIERARCHIES NOT TIME DEPENDENT.. So, plz explain the use for that.. and if possible give me any scenarios...
with regards
prakashHi
See this
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6702e07211d2acb80000e829fbfe/frameset.htm
Two clear examples are given
Bye
N Ganesh -
SAP BPC - Legal entity/Profit Center hierarchies - Time dependency
Hello,
Usually Organizational structure (legal entity/ Profit center) hierarchies are time dependent in EC-CS and BCS.
Are these hierarchies time dependent in BPC?
If yes, How these settings should be made in BPC?
Kind regards,
RJBPC NW does NOT support time dependent hierarchies. However in 7.5NW, you can use dynamic hierarchy editor that will enable you to do time dependent BPC reports.
http://aiokeh.wdf.sap.corp:50000/SAPIKS2/contentShow.sap?_SCLASS=XDP_STRUCT&_SLOIO=66348113C47B4AE7B2F068B88047D02B&TMP_IWB_TASK=PREVIEW2&RELEASE=610&LANGUAGE=EN&_SEQNUM=307&_LOIO=6983A56B1CE34F89A016C8E795C773BF&_CLASS=BCO_COMMON
Regards
Pravin -
Concept of Time-Dependency in BW
Hello Masters,
What is the Concept of Time-Dependency in BW?
What are
1. Time-Dependent Attributes
2. Time-Dependent Hierarchies
3. Time-Dependent Aggregates
And when why and when do we need/use them?
Please quote an example in your explanation.
I am bound to give points
Thanks and Best wishes,
I-BITime dependent attribute:
Have a look into the below records:
Cost center Valid to Valid from Business Area compay code profitcenter
100AE79 04/30/2005 01/01/1000 A 100 9056
100AE79 12/31/9999 05/01/2005 A 100 2000
From the above 2 records, profit center values are different for the same cost center for different periods. If you run a BEx report and if it runs for the current period, profit center displayed is 2000. If the same query runs for prior period say 05/12/2003 then the profit center displayed is 9056 for the same 2 cost centers.
The above concept is same for the other 2 cases as well.
Hope this helps..
Narendra
Maybe you are looking for
-
Importing archived project from DVD
I used burn disk to arcive a project to a DVD. That seemed to work fine. I then started a new project and tried to import the "archived project from the DVD and I keep getting this error: The file could not be imported: The file "Macintosh Hard Disk/
-
How do you print multiple copies of one photo on a page in iPhoto '08?
I've tried everything that I can think of, yet no success. It used to be so easy in '06! As you changed the settings for n-up, it would show you a live preview as well! Has anyone found a solution to this? If it is not possible, it is a GLARING omiss
-
Enabling CLIENT-CERT and FORM authentication in same web-app
Hi! I try to enable same behaviour in WLS 8.1 SP4 as is available in WLS 9.2 (one can define in web.xml to have many <auth-method>s, for example <auth-method>CLIENT-CERT,FORM<auth-method>, which states that first one tries authentication with token (
-
Application Server 8.2 on RedHat Linux configuration problem
Hello, We have OS Red Hat Enterprise Linux ES release 4 (Nahant Update 4), sun java 1.5.0, Sun Java System Application Server Platform Edition 8.2 (build b06-fcs), cpu : Intel(R) Pentium(R) D CPU 3.40GHz, ram : MemTotal: 2073848 kB, hdd : 2x SATA hdd
-
How many UI components are available in UWL?
Hi Gurus, As far i Know there are two UI components available to launch the work items in UWL . which is SAP GUI for HTML(Default) Webdynopro Weppages(Not sure ,Please confirm this as well). And give me the list of other