Time difference between the Identity system and Access System: OAM

I was installing OAM. Performed the below steps.
-installed identity server
-installed webpass
-setup of identity system console
-installed policy manager
-setup of access system console
The above steps were successfull. Then when i was logging into Access system console, i am getting the below error:
Error:there was a problem obtaining the userid. One possible reason for this is a time difference between the Identity system and Access systems (Policy Manager and Access system console).+
The Identity Server, WebPass and Policy Manager are installed on the same machine.
Userdata repository: OVD 10.1.4.3
Policy and Config Data Repository: OID 11.1.1.3
OAM: 10.1.4.3
Windows2008 - 64bit
Found document in metalink similar to this issue. suggested to change ldapmaxofreties. but didn't help.
Any idea on this error. Please Advise.
Thanks in advance.

Try this::
Check Time Difference Between Identity and Access Manager Systems
Check the logfile in the Access Manager install directory. The default location is <$AMinstall_dir>/access/oblix/logs/oblogfile.
If the file exists and it contains following line "skew = slack = " that means the Identity and Access Manager Web Servers are on different machines and have not synchronized time within a minute.
Either synchronize times between the two machines within a minute's accuracy or you can increase the slack by modifying these two files: <$AMinstall_dir>/access/oblix/apps/common/bin/oblixbaseparams.lst: loginslack: <$IMinstall_dir>/identity/oblix/apps/common/bin/oblixbaseparams.xml: loginslack: where numofseconds is more than skew found in the oblogfile.
For example, if you have following line in oblogfile "skew = 121 slack = 60", set numofseconds in the two parameter files to 130. After doing this, Stop the Identity Manager Web Server. Then stop the Identity Server. Start the Identity Server.
Then start the Identity Manager Web Server. Start a new browser session and see if you get the same error.

Similar Messages

  • Is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

    is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

    It the same phone but you don't have to have data on it if you don't want since they are older phones.  We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone.  Mary

  • What'z the difference between the Commercial Invoices and

    What'z the difference between the Commercial Invoices and
    Invoices/Excise Invoices? Also I understand that we can combine 2~3
    invoices and can create one commercial invoice? If it is possible, how
    to create the same?
    cheers
    shalsa007....

    Hello,
    A commercial invoice is a bill for the goods from the seller to the buyer. Commercial invoices are utilized by customs officials to determine the value of the goods in order to assess customs duties and taxes.
    In general there is no standard form for a commercial invoice although they tend to contain many of the following features:
    •     seller's contact information
    •     buyer's contact information
    •     consignee's contact information (if it is different from the buyers)
    •     invoice date
    •     a unique invoice number
    •     sales terms (usually in incoterm format)
    •     payment terms
    •     currency of sale
    •     full quantities and description of merchandise (Generally this includes unit price and total price. Product descriptions should be consistent with the buyer's purchase order. Including the Harmonized System commodity codes can be helpful, especially in countries that are WTO members.)
    Excise invoice “Original for Buyer copy”, whether  prices are inclusive or exclusive of excise duty.
    The invoice in which the Excise duties are included.
    As per Indian tax system, Excise duty (16%) is payable by each manufacturing unit on the value of manufactured goods / on the value added. The manufacturing plant is supposed to submit an excise duty report on fortnightly / monthly basis. Various registers (RG1, RG23A, RG23C, PLA) are maintained for that purpose, which record all the transactions including movement of goods, cenvat credit available and cash balance available.
    In SAP, we use transaction j1id for configuration and j1iin, j2i7, j1i5, j2i5, j2i6, j1ip for creating, extracting and printing excise invoice. 
    *Please reward if this helps**
    Regards
    AK

  • What are differences between the target tablespace and the source tablespac

    The IMPDP command create so manay errors. But the EXAMPLE tablespace is transported to the target database successfully. It seems that the transported tablespace is no difference with the source tablespace.
    Why create so many errors?
    How to avoid these errors?
    What are differences between the target tablespace and the source tablespace?
    Is this datapump action really successfull?
    Thw following is the log output:
    [oracle@hostp ~]$ impdp system/oracle dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
    Import: Release 10.2.0.1.0 - Production on Sunday, 28 September, 2008 18:08:31
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    Master table "SYSTEM"."SYS_IMPORT_TABLESPACE_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_TABLESPACE_01": system/******** dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
    Processing object type TABLE_EXPORT/TABLE/TABLE
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    CREATE TABLE "OE"."CUSTOMERS" ("CUSTOMER_ID" NUMBER(6,0), "CUST_FIRST_NAME" VARCHAR2(20) CONSTRAINT "CUST_FNAME_NN" NOT NULL ENABLE, "CUST_LAST_NAME" VARCHAR2(20) CONSTRAINT "CUST_LNAME_NN" NOT NULL ENABLE, "CUST_ADDRESS" "OE"."CUST_ADDRESS_TYP" , "PHONE_NUMBERS" "OE"."PHONE_LIST_TYP" , "NLS_LANGUAGE" VARCHAR2(3), "NLS_TERRITORY" VARCHAR2(30), "CREDIT_LIMIT" NUMBER(9,2), "CUST_EMAIL" VARCHAR2(30), "ACCOUNT_MGR_ID" NU
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    CREATE TABLE "IX"."ORDERS_QUEUETABLE" ("Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" VARCHAR2(30), "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" VARCHAR2(30), "DEQ_
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported "SH"."CUSTOMERS" 9.850 MB 55500 rows
    . . imported "SH"."SUPPLEMENTARY_DEMOGRAPHICS" 695.9 KB 4500 rows
    . . imported "OE"."PRODUCT_DESCRIPTIONS" 2.379 MB 8640 rows
    . . imported "SH"."SALES":"SALES_Q4_2001" 2.257 MB 69749 rows
    . . imported "SH"."SALES":"SALES_Q1_1999" 2.070 MB 64186 rows
    . . imported "SH"."SALES":"SALES_Q3_2001" 2.129 MB 65769 rows
    . . imported "SH"."SALES":"SALES_Q1_2000" 2.011 MB 62197 rows
    . . imported "SH"."SALES":"SALES_Q1_2001" 1.964 MB 60608 rows
    . . imported "SH"."SALES":"SALES_Q2_2001" 2.050 MB 63292 rows
    . . imported "SH"."SALES":"SALES_Q3_1999" 2.166 MB 67138 rows
    Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."REGIONS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."REGIONS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."COUNTRIES" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."COUNTRIES" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."LOCATIONS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."LOCATIONS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."DEPARTMENTS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."DEPARTMENTS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOBS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOBS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."EMPLOYEES" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."EMPLOYEES" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOB_HISTORY" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOB_HISTORY" TO "EXAM_03"
    ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
    ORA-39112: Dependent object type INDEX:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_LNAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_EMAIL_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"PM"."PRINTMEDIA_PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_CREDIT_LIMIT_MAX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_ID_MIN" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"PM"."PRINTMEDIA__PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"IX"."SYS_C005192" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUSTOMERS_PK" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_LNAME_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_EMAIL_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"PM"."PRINTMEDIA_PK" creation failed
    Processing object type TABLE_EXPORT/TABLE/COMMENT
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
    ORA-39112: Dependent object type REF_CONSTRAINT:"OE"."CUSTOMERS_ACCOUNT_MANAGER_FK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39083: Object type REF_CONSTRAINT failed to create with error:
    ORA-00942: table or view does not exist
    Failing sql is:
    ALTER TABLE "OE"."ORDERS" ADD CONSTRAINT "ORDERS_CUSTOMER_ID_FK" FOREIGN KEY ("CUSTOMER_ID") REFERENCES "OE"."CUSTOMERS" ("CUSTOMER_ID") ON DELETE SET NULL ENABLE
    ORA-39112: Dependent object type REF_CONSTRAINT:"PM"."PRINTMEDIA_FK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    Processing object type TABLE_EXPORT/TABLE/TRIGGER
    ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
    Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
    ORA-39112: Dependent object type INDEX:"OE"."CUST_UPPER_NAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_UPPER_NAME_IX" creation failed
    Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
    Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCACT_INSTANCE
    ORA-39112: Dependent object type PROCACT_INSTANCE skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39083: Object type PROCACT_INSTANCE failed to create with error:
    ORA-01403: no data found
    ORA-01403: no data found
    Failing sql is:
    BEGIN
    SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_SIGNATURE_TABLE('AQ$_ORDERS_QUEUETABLE_G');COMMIT; END;
    Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCDEPOBJ
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_V" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_N" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_R" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_E" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Job "SYSTEM"."SYS_IMPORT_TABLESPACE_01" completed with 63 error(s) at 18:09:14

    Short of trying to then reverse-engineer the objects that are in the dump file (I believe Data Pump export files contain some XML representations of DDL in addition to various binary bits, making it potentially possible to try to scan the dump file for the object definitions), I would tend to assume that the export didn't include those type definitions.
    Since it looks like you're trying to set up the sample schemas, is there a reason that you wouldn't just run the sample schema setup scripts on the destination database? Why are you using Data Pump in the first place?
    Justin

  • There is a difference between the document total and its components

    Hi!
    I have an error message "There is a difference between the document total and its components" when I want to create an InventoryGenEntry
    the problem arises from time to time and my customer must do the document two or three times before it is created.
    I have seen in this forum and in notes that this is probably being caused by a Rounding.
    I am using 2 digits for amounts, 4 digits for prices, 6 digits for rates and 3 digits for quantities.
    For information my customer use SAP 2005 and the patch level 46.
    This problem happened only in InventoryGenEntry. how can I modifiy parameters to resolve this problem?
    thank you for your help.
    Best Regards
    Séverine

    Hi Séverine,
    Do you find any additional code added to SBO_SP_Transaction stored procedure. A similar issue with stock transfer fixed in later patch. Please test in latest patch.
    Regards,
    Vijay kumar
    SAP Business One Forums Team

  • What's the difference between the triangle icon and the square icon on the

    What's the difference between the triangle icon and the square icon on the Bookmarks Bar, and how do you make the square thing happen?

    Both mean that the bookmark is a group or folder of multiple addresses.
    The triangle is the default setting, meaning that usually you click and choose a single address to open in the group. You can also right-click on the group name to select "Open in Tabs" to see ALL the addresses open in individual tabs.
    The square is this behaviour (open all addresses in tabs) fixed, so that it ALWAYS opens that way, even with a left click. If you want to access an individual address now, you have to use option-click.
    To switch between triangle and square, open your bookmarks screen (the book icon on the far left of the bookmarks bar, or Bookmarks menu - Show all Bookmarks, select the group you want to change, and tick the box marked "Auto-Click". You can of course switch back to triangle (default) behaviour in the same way.
    Matt

  • What is the difference between the iPad "3" and the latest model

    I saw that the "new" iPad was recently replaced at the same time the "Mini" was released. What is the difference between the iPad "3" and the newest model?

    The two differences that I can see are the new processor for the 4th gen iPad - the A6X which is supposed to be twice as fast as the current 3rd gen, and the new Lightning connector cable on the 4th gen.
    Essentially that's all that there is ... Both have the retina display, iOS 6, same size, and so on.

  • Difference between the  5 ghz and the 2.4 ghz network on the Airport Extreme

    Strenght signal-wise, is there a difference between the  5 ghz and the 2.4 ghz network on the Airport Extreme?
    Is the 5 ghz network on the Airport Extreme the 802.11n signal that is supossed to have better speed and strenght than the 802.11g spec?
    I am confused because I can not tell the difference in performance between both signal on my new A.E.

    The laws of physics always dictate that in order to gain something....let's say speed....you have to give up something else.
    In return for higher speed capabilities, 5 GHz signals are not as strong as 2.4 GHz signals, so they do not travel as far, or penetrate obstructions as well as 2.4 GHz signals.
    If your Mac is in close proximity to the AirPort Extreme, it will probably connect to the 5 GHz band. If you take your Mac to the other end of the house, it will probably connect to the 2.4 GHz band. The point is, the Mac will choose the best signal quality and connect automatically based on its location in relation to the AirPort Extreme.
    If you are curious to know which band the Mac is connecting to at an given time, hold down the option key on your Mac while you click on the fan shaped AirPort icon and look for the Channel setting. You will see either 2.4 GHz or 5 GHz displayed.

  • Difference between the T440s 20AR and 20AQ models

    Hi All,
    Does anyone have any information on the difference between the 20AR models and the 20AQ models for the thinkpad T440s?
    I can't seem to find the difference and it appears as though the 20AR models are always sold for significantly more in the retail stores.
    Thanks!

    Hi,
    Good question.  Digging through the tabook  http://www.lenovo.com/psref/pdf/tabook.pdf  it looks like a warranty difference.  AR models have a GMP (Global Models Plus) warranty.  I think...
    I haven't been able to dig up exactly what that means so far, but hopefully some else will join in and explain.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Which airport is good to extend my wifi, what is the difference between the AirPort Extreme and the airport express base sstation

    What is the difference between the AirPort Extreme and the airport express base station and which one can extend my wifi router.

    With rare exceptions of a few older routers, neither one can extend a non-Apple router's network wirelessly - they are not designed that way - but you can extend the wireless network if the Extreme is hardwired to the router or you can connect wirelessly and join the network as an access point that will provide remote ethernet access but not produce or extend the wireless signal - here is a comparison of the Apple base stations - http://www.apple.com/wifi/

  • What is the difference between the airport extreme and the airport express?

    What's the real difference between the airport extreme and the airport express except for the price and the size? Does one transmit with more range?

    Range is about the same, maybe a bit better on the Extreme, which has better antennas.
    The AirPort Exreme has Gigabit (1,000 Mpbs) Ethernet ports and the USB port will support a hard drive.
    The Express has 10/100 (up to 100 Mpbs) Ethernet ports, and will not support a hard drive at the USB port.
    The Express has audio capability for AirTunes while the Extreme does not.
    If you don't need to connect a hard drive and don't need the faster Ethernet ports, the Express is a good value.
    All the details here:
           Compare Apple Wi-Fi base stations          AirPort Express    AirPort Extreme    Time Capsule    

  • What are the major differences between the 4.7 and ECC5 or 6   ?

    Hi Abapers,
                            Can anyb one answer this question ....
    what are the major differences between the 4.7 and ECC5 or 6    ?
    Thank's,
    Siri

    Tan,
    we have solution for this question on previous pages.

  • What is the difference between the MapViewer.war and the .ear in 11.1.1.7.1

    There are two mapviewer file sets, the mapviewer.war and the mapviewer.ear in Oracle Fusion Middleware MapViewer Version 11g ps6 (11.1.1.7.1).
    What is the difference between the mapviewer.war and the mapviewer.ear in 11.1.1.7.1?
    Which one should I install in the Glassfish?
    The mapviewer.war is in mapviewer11g_qs\apps.
    Thanks
    Edited by: 1008396 on May 28, 2013 1:24 PM

    the war is the preconfigured/deployed mapviewer in that glassfish container.

  • Difference between the Field Group  and Internal Table.

    Hi all,
    Can anybody tell me the difference between the Field group and Internal table and when they will used?
    Thanks,
    Sriram.

    Hi
    Internal Tables: They are used to store record type data in tabular form temporarily in ABAP programming. Or we can say, it stores multiple lines of records for temporary use in ABAP programming.
    A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
    Use
    The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
    When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
    Regards
    Ashish

  • Differences between the alv's and alv grid dispaly

    hi guys
    .........please send the  differences between the alv's and alv grid display.
                    thanks....

    Hi Midathala,
    Plz go through the links might be useful to you.
    Simple ALV report
    http://www.sapgenie.com/abap/controls/alvgrid.htm
    http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    Check the program in the following link:
    http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    13. Top-of-page in ALV
    selection-screen and top-of-page in ALV
    14. ALV Group Heading
    http://www.sap-img.com/fu037.htm
    How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    15. ALV output to PDF conversion
    It has an example code for PDF Conversion.
    http://www.erpgenie.com/abap/code/abap51.htm
    converting the output of alv in pdf
    Thanks
    Mohinder Singh Chauhan

Maybe you are looking for

  • Error in syntax of trigger

    drop trigger hp_backup_check; create or replace trigger hp_backup_check AFTER INSERT on hp_patient_record FOR EACH ROW BEGIN INSERT INTO hp_backup_record values(:old.record_id, :old.patient_name, :old.patient_age, :old.admit_department, sysdate, user

  • How to set the Initial path in the FILE name field of a JFilechooser?

    as title thx...

  • Parsing SOAP with JAVA

    I need to be able to take the XML portion of a SOAP message and send it to another a program as a text String. So basically take the SOAPBody, extract the SOAPElements and then write the contents to and output stream... Can anyone tell me how to do t

  • Settling Labor costs

    Hi Experts, How do you settle any labor costs. I have created a secondary cost element and tied it an activity type. In the work order I enter 2 hours of this activity. Can I settle these costs from a secondary cost element to a primary one? Thanks

  • FI error in rspc chain

    Hi expert I am phasing an error in fi process chain. In fi process chain there is error in data storedata" generated from LOADINGZPAK_1A2VTWYIMZBOP6NIFTBX7XDX" Error message which aries are Activation of Data / 16.04.2008 / 09:03:54 error in "SID Gen