Time Format (Grand Total) in OBIEE 11g

Experts,
In my Report Talk Time and Delay Time are present and I have enable the Grand Total based on Agency.
i.e.
Agency - Talk Time - Delay Time
AgencyA 00:05:10 00:00:02
AgencyB 00:02:12 00:00:01
AgencyA 00:15:13 00:00:02
AgencyC 00:10:10 00:00:25
GrandTotal 00.00:32.00:45.00 00.00:00.00:35.00
Look at Grand Total is shows like *00.00:32.00:45.00 ; 00.00:00.00:35.00*
But our requirement should be *00:32:45 00:00:35* for Grand Total.
Please let me know your valuable suggestions.
Thanks,
Balaa...

Hi bala,
Tricky one and good question,never tried this or got this type of requirment.
did you aggregate the talk_time and delay_time,if so what is it ?? or did you use it as default one.
Play with it like using server aggregation so it would determine the correct totals i suppose.
hope helps you.
Note:- If you get any solution or work around please post here so we could also learn & looking forward for other experts go on it.
UPDATED POST
Instead of sum as aggregate can you try server complex aggregation so server would decide how it would handle or
even the max or min function .....its just playing with it to get a solution and check the query generated and run at the backend and see how the results are coming.
Cheers,
KK
Edited by: Kranthi.K on Apr 18, 2011 2:08 AM

Similar Messages

Condtional formatting on Grand Total in OBIEE 11.1.1.6.7

Hi,
We have upgraded a report from 10g to 11g and the report has pivot table which has conditional formatting set on the Grand Total level and is resulting in the following error in OBIEE11g.
“DXE compiler error. No table 'GTGT' found in DXE. Source name: DxeAPI. XML: None”
XML Snippet in 10g:
<saw:condition>
<sawx:expr xsi:type="sawx:comparison" op="notNull">
<saw:columnRef columnID="xx"/></sawx:expr>
<saw:displayFormat fontColor="#FFFFFF" wrapText="true"/>
</saw:condition>
Equivalent XML Snippet in 11g:
<saw:conditionalDisplayFormat>
<saw:formatRule>
<saw:condition>
<sawx:expr xsi:type="sawx:comparison" op="notNull">
<saw:columnRef columnID="xx"/></sawx:expr></saw:condition>
<saw:formatSpec fontColor="#FFFFFF" wrapText="true"/></saw:formatRule></saw:conditionalDisplayFormat>
Please let me know how to resolve this issue.

Hi User,
This report is corrupted. You can rebuild or re copy the xml from 10g to 11g and see if it works.
Thanks,
Amol
(Please mark this answer, if you find helpful)

Formatting Totals in OBIEE 11g

Hi,
we have a requirement to format the totals of a table in obiee 11g.
When I format the totals, the formatting selections I made is not applied for all the entire totals section.
If the table has more than one dimension values in it, the formatting changes on Totals section is applied only for the first cell in the section.
However, the formatting changes of Totals section are fine for the measures added.
Please refer the screenshot in the below url
http://tinypic.com/r/346q4p1/6
In the screenshot, I expect the cell under Month dimension in the Totals row to have grey color as the back ground.
Could someone help me out with this issue.
Regards,
Pavan K.

Can you share your code that helps to understand issue.
Appreciate if you update your other post and helps you to get responses ;)
Aggregation in logical columns in obiee

Reg : Grand Total in OBIEE

hi all,
I have two measure columns and i performed grand total on that columns .
Here, I want grand total only for one measure column (I dont want to use default aggregatio rule as none).
Any formatting options available(for eg: fill the same color for the measure as well as value for the particular column Grand Total)
Can u help on this?
Edited by: udeffcv on Apr 5, 2010 12:24 AM

If you are using Pivot table.,
try placing the measure cols(for which grand total is not needed) in the "Rows" section of the pivot table.
Regards,
Raghu

Can I set a conditional format as default in OBIEE 11g?

Hi,
I would like to set all positive number be (green) and negative number be (red) for all tables in Analytics Web (OBIEE 11g). Apart from create conditional format for every tables, is there any way to set once only and apply for all reports?

Hi User,
You can set system wide default by clicking on the button in conditional format tab.
*Make sure user has "Save System-Wide Column Formats" privilege to enable the option.
Regards,
Dpka

How to manipulate the total in obiee 11g

Hello,
I would like to know if its possible to customize the Grand total in the table.
I just added the grand total in a table.The table has 7 columns.5 columns the grand total is just a sum so no problem but the 6 and 7 column is % column its like
grand total of col 6->(grand total of col3-grand total of col4 /grand total of col4 ).
Is there a way i can do this?
Thanks

You can add this formula in column 6 like (col3- col4/sum(col4)) but at the total level you will get the tables first row value. This is the bug in 10g & 11g.

Grand total in OBIEE Answers

I have say three columns in a report, Col A that aggregates by SUM, Col B that also aggregates by SUM and Col 3 that aggregates by Avg
Col A Col B Col C
Amount Qty Avg price
10 3 3.33
20 4 5
30 7 ? Grand Total (use of report total)
I want to see Sum (col A) / Sum Col B and average of Col C where I have ?, how can I do that?

Hi,
If i got you correctly,
i think you can achieve this way.
Criteria:
Dim X, Dim Y, Col A , Col B , Col C
case i:
If Col A & Col B are Aggregated to SUM(in RPD),
then in the column formula of 'Col C',
Col A/Col B (Aggregation Rule - Default)
This gives you the SUM(Col A) / SUM(Col B) for the Grand total Row for 'Col C'
case ii:
If Col A & Col B are Not Aggregated to SUM(in RPD),
then in the column formula of 'Col C',
SUM(Col A BY Dim X, Dim Y)
SUM(Col B BY Dim X, Dim Y) (Aggregation Rule - Default)
This gives you the SUM(Col A BY all Dim X,Y values) / SUM(Col B BY all Dim X,Y values) for the Grand total Row for 'Col C'
Hope it helps you.
Regards,
Raghu

Unable to do Grand Total in Pivot table view in OBIEE 11g

Hello Experts,
I am totaly new for OBIEE 11g
I have created a report and wanted to do row wise total. Simple grand total in OBIEE 11.1.1.5 version. While doing the summation 'After'. I am getting a Window internet explorer Pop-up Saying the following.
"Are you sure you want to nevigate away from this page?
The changes that u made on this object has not been saved. Click cancel to return to the editor where u can save the object.
Press OK to continue or cancel to return to the page".
I tried both option, but non of the options are working.
Please provide me a solution on priority because client is on head.
Thanks in Advance.
Niraj

Hi,
Its Permissions issue.can u please try to do it outside local mechine(just open IE8 then call the server url from outside ). i hope u tried inside server pc its limited permissions for logged in users thats why its not allowing to do edit the anaysis report.
let say u have DEV/UAT servers the application installed with some other users (admin group user or power user) while u r accessing and doing devalopment better to use outside browers .
Note: i have also faced same issues (IE8 browser security level permission in win 2008 server).solution u can just try to access the url from outside server.
Thanks
Deva

Error while deploying RPD in OBIEE 11g (11.1.1.3)

Hi Friends,
At times while deploying RPD in OBIEE 11g, I am getting an error, "_*Supplementary information regarding operation: DOMAIN, UNEXPECTED_ERROR;/tmp/zipped-directory.zip (Permission denied)*_".
We have installed OBIEE over a LINUX machine. I tried to locate this file in the server but was not able to find any such thing. This error happens at random and I am unable to predict the occurrence of this error.
Can someone guide me how to resolve this issue?

You have to disable the central configuration:
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10541/disable_em.htm#BEIIAEGD
Change your repository in the file nqsconfig.ini
and
change the password if needed in the credential store ...
http://gerardnico.com/wiki/_detail/dat/obiee/obiee11g_credential_store.jpg?id=dat%3Aobiee%3Acredential
But if you can't open EM, it will be very difficult and may be you must have to add resource (memory, ...) to your server.
Regards,
-Amith.

Measure Grand total is wrong

Hi,
I found it is wrong for grand total of measure / calculated field? Here is my sample and data:
Here is the data:
TotalForecast:=CALCULATE(SUM([Qty]), Table1[Data Type]="Forecast")
TotalSales:=CALCULATE(SUM([Qty]), Table1[Data Type]="Sales")
Diff:=[TotalSales]-[TotalForecast]
ActualDemand:=if([Diff]<0,[TotalForecast],[TotalSales])
Is there something wrong for my expression?
Thanks
Wilson

The "problem" is that measures actually calculate individually for each cell in a pivot. What that means is that technically the grand total row in a pivot is not related to the rows above it. Intuitively, it seems like it is related
because often times the grand total is what you expect. This can be a little confusing at first but there are some blog posts out there that do a good job of explaining the concept.
Your current measure is looking at the Diff only as it pertains to the grand total row. It sees 9 and therefore returns the value of TotalSales.
The quickest fix is probably just to add one more measure that forces your current measure to evaluate itself in the proper context:
ActualDemand2:=
SUMX(
VALUES(Table1[Product Type]),
[ActualDemand]
In PowerPivot functions that end in "x" are called iterators. They let you change the granularity of a calculation by cycling thru the individual rows of a table you specify.
In this case, the table I am using is VALUES(Table1[Product Type]), which is a single column table containing the unique values of the Product Type.
Now your measure evaluates the sum for each Product Type (which ends up being the 4 results showing in your pivot table above for each Product) and adds those 4 results together for Grand Total.

How to hide % measure column Grand Total value in Pivot View in obiee 11g?

Hi ,
I am facing a issue in obiee 11g .I am using a Pivot table to display the grand total of 3 metric columns eg: A , B, C out of which B is percentage so I need to remove the grand total value of the percentage column. We have to stick to Pivot View only. Anyone can sugest me on this?
Thanks ,
Shruti

Move B to rows section or cast to char in Criteria tab by keeping the B in Measures section only.
cast(B as char)

Obiee 11G - Show grand total in chart

I have three measures in my table.
Measure 1 - Rolling balance from the current and previous month.
Measure 2 - PeriodRolling revenue for the last three months including current month
Measure 3 - Calculation using measure 1 and measure 2 and the number of days.
I have created all three measures in the RPD.
The table is by state. So it could be Texas, New York, Illinois and so on.
Month
State
Measure 1
Measure 2
Measure 3
1
Texas
17565
9898989
45
1
New York
97848
8748575
43
2
Texas
85768
8734874
33
2
New york
94855
3234442
23
The chart shows the trend of Measure 3 by time for each state. I need a line on the chart to show the total by month. Do I have to create a sum() formula in the RPD? Appreciate any ideas that you can throw at me.

I created a new group in the selection step and included all the states in it. That seemed to work. The Graph shows a line for grand total. Thank you for your help.
The requirement is to create a line chart. I don't think a bar would work as well here.

OBIEE 11g - How to display Grand Total in graphs

hi ,
I am using obiee 11.1.1.6 version . In a report I have a requirement to display the grand total (present in the table) to be shown in the graph also . Kindly help.
Regards,
Niv

Hi Niv,
One quick question here.How are you creating Grand Total?
I have created using grand total by row summing and inserting that value in the Group By Function.
Attached the screen shot for your reference.
GT - Download - 4shared
Mark if helps
Thanks,

HH:MM:SS Time format to show in Graphs - OBIEE 11g (11.1.1.5)

Hi,
I have got a requirement to show time format in graphs. I am converting seconds to HH:MM:SS format using the formula that I found in one of the blogs.
http://123obi.com/2012/06/obiee-converting-seconds-to-minuteshoursdays/
Is there better way to conver seconds to HH:MM:SS format?
Note: I don't want to show the days because in our requirement it would never reach to it.
How to show the values like 1:11:34, 0:23:54, etc... in the graph?
Thanks in advance.

Hi
We have implement two ways.
Method 1:
Open your repor--> click your date column --> use the below syntax.
SUBSTRING(cast("- D_CALENDAR_DATES".DATE_TIME as char) FROM 11FOR 9)
method 2
Open your report --> Goto your column properties--> data format--> Override Default Data Format -->select custom--> give your format like (HH:MM:SS).
Hope this help's
Thanks
Satya

OBIEE 11g Grand total issue

Hello,
I have one requirement where I want to show the data as follows
Type          Metric          Values
Type1          units          100
          Days          50
          % Calc     10%
Type2           units          100
          Days          50
          % Calc     10%
Type3          units          100
          Days          50
          % Calc          10%
Total units     300
Total Days     150
Total % Calc 30%
If I take grand total of row in pivot table, I am not able to show Total units, Total Days and Total % Calc values in Grand Total because by default, same grand total name appears.
I want to give different grand total names and percentage sign should appear in grand total.
Please let me know if u need any more information.
Thanks.

Try to recreate the report. Just in case make sure that you dont have null values in that metric or try with ifnull(col,0)
Check this bug too BUG:9871470
Keep update

Time Format (Grand Total) in OBIEE 11g

Similar Messages

Maybe you are looking for