Time-lapse and Image Sequence issue (Possibly also Frame-Rate)

So I'm in the process of making a time-lapse, and have batch edited and exported (in jpeg) 627 images. My sequence settings are 23.976fps 1920x1080 (1080p). Doing some quick math, 627 images at 24 frames a second should give me a little over 26 seconds. However, I'm only getting a 20 second clip. The settings on the clip are 29.97fps and 5184x3456 (I scale it down and use some keyframes to add some motion.) So my question is is there a way to import an image sequence as 24 fps, rather than the default 30 that the clip is imported in? Even when I put it the clip on the timeline and click "Keep sequence settings" it cuts it down to 501 frames, and I still only get 20 seconds worth of clip. Thank you for your answers!

I am in PAL land so I not that familiar with ntsc but I think the difference has to do with the 23.97.
If you make a custom sequence you can set that to 24 fps exact.
Import the jpegs as an image sequence. this means select the first image, check image sequence at the bottom of the window and hit OK.
Also in the preferences under Media set the Indeterminate Media Timebase to 24.

Similar Messages

How do I convert time lapse still images into a video in Premire Elements 13?

I have 250 images taken at 15 second intervals that I want to convert to a video. I am not having any luck finding how to get elements to put the single pictures together. After I import the images I can play them but have not been able to shorten the time each still plays. So It is like a slide shot and not time lapse.

Bobclarkfiber
Please read my blog post very details how to for Time Lapse video and Premiere Elements.
http://www.atr935.blogspot.com/2013/07/pe-time-lapse-video-basics.html
and my less preferred way
http://www.atr935.blogspot.com/2013/08/pe-numbered-stills-in-time-lapse-and.html
Please review and consider. If you have questions or need clarification on any of the above, please do not
hesitate to ask.
Thank you.
ATR

Wacky image sequence issue - flickers

Hi guys,
I've created a simple 2 image sequence I wanted to play through at the top of my DPS document - but when I preview the article (on both desktop, iphone and ipad) the image sequence fails..
I took a quick screencap to show what Im going.
DPS Image Sequence issue - YouTube
Any advice?

For a two-image effect, I would use a slideshow instead of an image sequence. Not sure what's causing the flicker.

Time-lapse Still Images

After two hours of reading on the web, I was unable to find any help for my problem. Perhaps someone out there has some knowledge to share.
I have several years worth of still images. The images were taken in 15 minute intervals. I need to display the images as a time-lapse movie with controls to step through each frame (still) or animate to time-lapse forward or in reverse. I would like to dynamically select the images corresponding to any date from a calendar component. A cover flow would be nice if it could somehow display the respective date with the image.
However the best method is for doing this, the result needs to function within a Flex application. I am just a beginner Flex developer so I need at least to know if this is feasible. All opinions are welcome.
Thanks!

Bobclarkfiber
Please read my blog post very details how to for Time Lapse video and Premiere Elements.
http://www.atr935.blogspot.com/2013/07/pe-time-lapse-video-basics.html
and my less preferred way
http://www.atr935.blogspot.com/2013/08/pe-numbered-stills-in-time-lapse-and.html
Please review and consider. If you have questions or need clarification on any of the above, please do not
hesitate to ask.
Thank you.
ATR

Is there anyway to have Premiere Pro recognize the "in" & "out" points and the sequence's "home" (first frame) as edit points so that the up & down arrow work as short cuts on these areas?

Is there anyway to have Premiere Pro recognize the "in" & "out" points and the sequence's "home" (first frame) as edit points so that the up & down arrow work as short cuts on these areas?

Hey guys, I wrote a big long speech trying to be more clear and was just getting more confusing. LOL
Hopefully this image makes my question a bit easier to understand. In green you can see how the up and down arrow keys land while in Final Cut. In red how they land while in Premiere. I'd like them to land like Final Cut. Thanks!

Sequence settings for varied Frame Rates

Greetings. I am new to Premiere Pro and also new to working with different frame rates in the same project. I am using footage from a Canon Vixia HF S10 and Flip video MinoHD.
The frame rate of the Canon .MTS files seems to be 60fps. The frame rate in the Flip .mp4 seems to be 24fps. In other projects in FCP, I've converted the .MTS files to Mp4, but I'm not sure if that is necessary in PP5.5.
My questions are:
1. At what frame rate should I set my sequence?
2. Is is advisable to convert the .MTS files and if so should I do so to match the Mg4 files exactly?
3. What other pertinent information should I have to optimize quality?
I appreciate any guidance without judgement on my limited knowledge .
Thank You ~ L
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
iMac5,1
Intel Core 2 Duo
2 GHz
L2 Cache:          4 MB
Memory:          3 GB
Edit Drive:
Capacity:          1.82 TB
Available:          27.83 GB
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk3s2

You might convert to an intermediate codec that isn't as demanding as AVCHD or MPEG4. Do you have Prores as an option? It might be a pain pre-processing, but your editing will go smoother.

Drag and Drop Image Sequence Issue

Hello,
Im having trouble dragging and dropping an image sequence folder. The folder drags in perfectly and the window even highlights but nothing happens. However when I go through FILE and IMPORT i do have success bringing in the image sequence as comp.

> Is there anyplace to go to find known bugs with the program incase something like this arises in the future?
We often post solutions to known issues on the Technical Support part of our site.
I'll go ahead and write up a quick list of known issues in After Effects CC (12.2) with workarounds.
Regarding the update that we thought we'd be releasing this week: We ran into a problem in which one of our fixes broke something else (which is why we do the testing), and we're having to redo some things. My current estimate is that the update will not come out this week but will come out some time within the next couple of weeks. Sorry for the delay, but we need to get this right more than we need to get it out fast.
I'll post a summary of workarounds tomorrow to bridge the time between now and when the update is released.

Importing Image Sequences Issue

I have been supplied with Tiff Image Sequences rendered out of Maya. Unfortunately they do not import correctly, or in order, though their naming convention seems correct.
EG
ep000sq01_sh0010_compv02.0001.tif
ep000sq01_sh0010_compv02.0002.tif
ep000sq01_sh0010_compv02.0003.tif
When imported into QT 7.1.3 if I scroll frame by frame through the resulting QT movie there are numerous duplicate frames, dropped frames and frames out of order. This should not be due to my machine as the specs are quite sufficient [G5 DP 2GHz / OS X 10.4.8, 1 GB Ram] as compare to the QT required specs page, see http://www.apple.com/quicktime/guide/hd/recommendations.html
The Tiff images are of a decent resolution [1280x720].
Also when imported into FCP 5.0.4 even if in my user preferences under the Editing tab my Still/Freeze Duration is set to 1 frame, the images in the image sequences will not import with a duration of 1 frame BUT import with a duration of 0 frames.
This all seems very buggy / conflicted for reasons unknown to me at this time.
If there are any suggestions they will be extremely welcome as time is of the essence [unfortunately].
Thanks in advance.

I use the Animation codec and in both cases the fps selected are 25 fps.
Funnily enough, the image sequences have come from an organisaion that I assumed would have their naming conventions sorted, EG enabling easy consolidation into one QT movie or importing into FCP.
I agree with you that the naming convention may be the cause of the conflict, possibly working better if we dropped that additional "full stop" between the "2" and the first of three "0"s.
EG ep000sq01_sh0010_compv02.0001.tif
Regardless, thanks for your advice.
BTW Have you ever lived in Australia as I could have sworn there was a Matt Haveri at my high school [back in tha day...ha ha]
G5 DP 2GHz / OS X 10.4.2, 1 GB Ram Mac OS X (10.4.2)

.gif animations not working and image thumbnail issues

Hello,
I hope that someone can help me out.
I have animated .gif images on my iWeb site and they just recently stopped working, and I cant figure it out.
These are my issues:
Recently iWeb wont show my animated .gifs as they should. (I have found that this still kind of works in IE, but not FF or Safari) In iWeb my .gifs show as a video clip, but once I publish the site, it only shows up as a single image and not an animation. Also the options on my site that allow users to switch back and forth between showing the miniature thumb nails of my images for the slideshow and not showing them do not show up all the time. The .gifs are also not showing up inside the miniature thumbnails as well.
Also note: Those miniature little thumbnails show up very fuzzy as well. This doesn't seem like it should be like that. Am I over looking something important?
Not sure what I have to do to fix these issues. I have looked to see if I am missing an update or something, but it appears that I am up to date.
Can anyone help me out?

Hi Neil,
I have the same problem.
I created a short title animation with EDGE, you can download it here : https://creative.adobe.com/share/829a6ca9-7f26-4ee5-8120-a5da388e3c33
Once in inDesign, I create a web content overlay that I link to my html animation.
I turn ON auto play and set a delay of 0.25 sec. The article that contains the animation is the third of my folio.
If I preview the article ONLY, the animation fires correctly however if I preview the whole folio, the title appears but with no animation what so ever.
Any help would be much appreciated.
Cheers,
J.

Image sequencing issue

I shoot with two bodies. One camera shoots CR2 the other DNG. The cameras are synchronized so archived images appear in the order that they were shot—regardless of what camera they were shot on. However, I am having an issue with my current project where when I view (the entire take) through the parent folder (images are contained within in dated subfolders) they are filed by the camera they were shot on i.e all of camera 1's files first, then camera 2 (messing up my chronological sequence). This also applies when I select my flagged images through the parent folder. The two cameras' files are separated. I have no filters applied.
If I open the dated subfolders the files are sequenced correctly. Same with filtering for flagged files within the subfolder. I am only having this issue with the parent folder.
It must be something simple but I haven't been able to figure it out! Thank in advance for any suggestions.

Within your dated sub-folders you presumably have set the sort sequence to "capture time".
These settings are saved per folder.
If you do not see this, make sure you have the toolbar toggled to visible (letter T).
What is the sort order in the parent folder? "File type" or "File extension" would explain the behaviour you describe.
Try setting it to "capture time" as well. This should achieve your desired order.

Render error with h.264 and Image sequence

Hi,
I have simple animation I want to render out. Problem is when I export it as h.264, error happens on one frame like you can see here.
Whith image sequence, Motion will render skipping frames here and there so some part are just fine, but some part are not.
Also some frame has same green error just like with h.264. I'm rendering as PNG.
I also tested rendering as Prores HQ and that one came just fine. Weird isn't it?!?
Any idea what might cause this?
I need h.264 for preview purpose and final result as image sequence...
Thanks
Message was edited by: Raty Better title and tags

Hi,
Thanks for response. Sorry, but I can not share project file since it's client work.
Anyway, I think latest 5.0.3 update might be issue. My Mac setup is OSX 10.7.3 on Macbook Pro (2010) with i7 and GeForce GT 330M.
I have also older Macbook (I think it's 2008 model with only version of unibody Macbook) which has also same OSX 10.7.3, but Motion 5.0.2. Tested with very same project and rendered out without any problem!
So, is there any way to reinstall one step older version of Motion after installing 5.0.3???

Time lapse single image

Anyone know how to pull a single image out of an iPhone 8 time lapse photo/video?

I'm very disappointed with Apple, they release the latest and greatest forward thinking professional editing program which as it turns out does not have the ability to import a sequence of single frame images. I operate at 23.98 frame rate. If I adjust the still image setting to 0.04 seconds no image in imported, if I set to 0.05 seconds images are set to 2 frames. You used to be able to import images as single frames but only in JPEG. You can't import Raw directly via photo browser integration with Aperture.
Creating Time Lapse movies is increasingly becoming more popular which Apple seems to have completely overlooked.
Seriously isn't Apple coordinated within its development teams. Don't they have a list of functionally with previous software versions to check against when developing new applications?
I could do all this with Adobe programs instead of going backwards with Apple programs. So far I'm disappointed with this release. I hope that Apple do something to broaden it's view of the user base needs.

FCS and image sequences (TGA...) : how works the proxy creation?

Hello,
I would like to know how work FCS with image sequences (TGA, TIFF sequences...) for proxy creation.
For example, the image sequences are created by 3D workstation at the speed of one frame per second.
Does FCS create a proxy each time the folder is checked? The old proxy is delated?
Thank you for your answer

Jim is right. You can't replace a clip with an image sequence.
If you are rendering your comps from one system, follow Jim's sage advice.
But, in the cases when I do a multi-system network 3d render, there is
no way for all systems to write to the same Uncompressed AVI file...
so rendering to an image sequence is the only option.
You say:
...for speed reasons - converting them to lower res quicktime files
and using those to edit in Premiere Pro.
You might consider converting your sequences to both a low-res proxy for editing,
and also convert to full-res lossless codec AVI files at the same time for swapping out later.

Support for RAW Video and Image Sequences

Being a stills photographer who moved into video some years back, I'm very interested in the direction Lightroom is going with regards to video support. I haven't tried it yet but I wondered if LR4 supports Red R3D files? And would it perhaps support other future RAW video formats from the likes of Canon and Sony? It would seem like the perfect application, perhaps intergrating with Premiere in a similar way to RedCine with FCP. Be great to be able to log footage, orginize it into bins and do basic colour correction in LR, edit the project in Premiere and re-touch in After Effects.
Another task LR would seem ideally suited to is combining image sequences into timelapse video. Shooting timelapse as an image sequence on a DSLR is pretty much standard practice these days; and I've used LR to colour correct, crop and scale my sequences (before fitting them together in Quicktime) for years now. It would be fantastic to be able to preview the clip and export the video (as DPX, ProRes or DNxHD) from within Lightroom.
These are obviously fairly long term wishes. In the short term though, the video features are pretty much useless to me without support for exporting ProRes and DNxHD files. With this LR becomes a powerful asset manager that could be used to collect together footage from multiple sources/codecs and transcode it all for editing. As mentioned in a previous thred, XML support would make it even more useful in this context. There is definitly a gap in the market for an application than can handle this kind of task well.
With other manufactures floundering or neglecting their professional user base, Adobe would seem poised to take the video post crown. I wonder if Lightroom could be part of the takeover?

As I understand it Andy, its intention is to remain a photographers program, not a videographers program. The basic video features are available for lightweight management of videos coming from digital cameras, but it's not going too much further than that at this point in time. Of course that may change in the future, but we'll all have to wait and see on that one.

Image Sequence Issue

I've got some large pictures I've been asked to make into a sequence and retain as much of their quality as possible, they will be used in a PDF plan report. I started with Flash but it couldn't handle the full size images (5184x3456 - 72dpi). I've moved over to Premiere but I'm getting something weird happening when I import them in as a numbered group. They import fine but only 1 image is being shown in the preview for the complete sequence and the sequence icon in the project is a jpg icon not the little movie film icon you normally get. Any idea what might be happening?
My sequence setting in Premiere is 5184x3456 10fps. There are 17 images and I want them to play about 3 seconds each.
Thank you for your help,
Jenna

Don't import as an Image Sequence.
Start by going into Preferences and change Default Still Duration to 3x your intended frame rate. (3 x 24 fps = 72, or 3 x 30 fps = 90, etc.) Then import all your images normally. When you bring them to the sequence, they'll be 3 seconds long.

Time-lapse and Image Sequence issue (Possibly also Frame-Rate)

Similar Messages

Maybe you are looking for